'98 GMC Sonoma - A/C Compressor

Рет қаралды 83,826

Ай бұрын

In this blast from the past, we have a look at a customer's 1998 GMC Sonoma that is MINT! Low miles too. He wants the A/C repaired and he wants OEM parts. Yes sir, let's get after it!
-Enjoy!
This one comes back to bite me! See the video here: • SMA Gets A Come Back! ...
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 477

@SouthMainAuto 25 күн бұрын

UHOH! This one comes back to haunt me! Check it out here - kzfaq.info/get/bejne/odCBnbyHv7e-d6c.html

@TStheDeplorable Ай бұрын

I did this very job but on a 2002 Silverado with the 4.3. I couldn't have done it without 10+ years of advanced automotive studies at KZfaq Tech! Thanks, professor!

@TStheDeplorable Ай бұрын

It always feels better when we get a "hey there viewers!"

@peacefrog0521 Ай бұрын

And we got two of them! Bonus! 😅❤

@isorozco511 Ай бұрын

Yes! Also when he ends with if i can do it you can do it, thanks for watching

@Shiver2002 Ай бұрын

You weren't kidding when you said mint.. Wow.

@SouthMainAuto Ай бұрын

Yeah it's nice 👍🏼

@NicholasAndre1 Ай бұрын

I have a 2000 Sonoma and it looks like hell. If anyone wants it it’s parked on the street 😂

@jyao5409 Ай бұрын

Don't you love it that the compressor is right on top, and easily accessible.

@KrazyKuul111 Ай бұрын

I prefer having to remove the wheel, wheel liner, right side engine mount bolts, having to jack the engine up a little, only being able to barely finagle the compressor out in a very specific manner (having to rotate it 180 degrees first, obviously), then getting the new one in, unsure if you messed up a gasket/seal in the process, and then you try to jam R134A (the cans with leak stop of course) into it, having no knowledge of AC systems or how they work, finally learning that you forgot to remove the plastic protective plugs that prevent debris from getting inside the compressor (after you take it to a shop to do the job for you).

@tomoakhill8825 Ай бұрын

Search for 1974 Oldsmobile Cutlass. Look for an image of a restored one showing the engine. Note the vast amount of unused empty space under that hood. Seven of the eight spark plugs are easy to reach.The eighth was under the AC compressor, and people complained loudly.

@throttlebottle5906 Ай бұрын

cool, now go replace the power steering pump on it.. 🤣

@BigEightiesNewWave Ай бұрын

And alternator!!!

@cognac8297 8 күн бұрын

Yeah

@woodlandwonders6887 Ай бұрын

I had a 99 4 cylinder manual, 2wd Sonoma. It was a dependable truck that gave me 300k miles. The engine and clutch were original and still going strong. It lost the battle to rust in 2013. It was a great vehicle.

@DortuAirCond_ACmobil Ай бұрын

Nice

@KC-pf4tj Ай бұрын

I still drive an old 98 but a blazer 4 door. I put in a AC compressor last summer but also replaced the orifice and receiver dryer. I couldn’t believe how dirty the old one was. So I replaced what I could and flushed the system out and I couldn’t believe how cold the air out was! Late 60s and still love working on cars. 👍🏻

@greg.goergens6315 Ай бұрын

Nice old school truck. Kinda nice watching you not have to struggle with corrosion for a change!

@SouthMainAuto Ай бұрын

You got that right!

@opiumtrail7032 Ай бұрын

Truck?

@harrywalker968 Ай бұрын

@@SouthMainAuto story. 70,s late.. biker goes into harley shop, his speedo is junk, ask guy for new one, puts it on counter, harley guy looks it over, says, this piece of crap is made in china,. counter guy says,. look at your old one......

@emporium597 Ай бұрын

As a Friday night into Saturday morning driveway mechanic, I miss these trucks

@missulu Ай бұрын

Many years later, and still a better truck than most made by GM. Great video!

@edbernier5513 Ай бұрын

You seem happier working on the old stuff. Nostalgia and simpler times…

@arthurturner9398 Ай бұрын

Best vehicle for your money in my opinion. My 2000 2.2 5 sp has 304k and running strong. Bought it 8 years ago for $800 needed a clutch. 160k later i have about $2500 total invested in it. Thinking that is about 3 months new vehicle payment lol. I rather have a nice house than a fancy truck that sucks your money.

@michaelmankowski5092 Ай бұрын

I had 3 of these babies. 95, 4 banger , manual. One of the best trks I owned. Taught my kids to drive stick in it. Back when it was somewhat ok to let them drive on frozen lake. Later, a 2000 V6 4.3. And a Crew cab 4 door. To me, one of the best little pickups ever.

@mudman7618 Ай бұрын

I had a bit of a unique one - 87 s-10 2.4 - but Auto and the guy that owned before me added AC to it. apparently he flat towed behind a motorhome. great truck, and I added a heavy front sway bar to it, handled like a go kart. drove back and forth to college before paint fade and body rot started to get it - sold it - and the next owner literally drove it till the doors were see thru. that little 2.5 was bullet proof.

@michaelmankowski5092 Ай бұрын

@@mudman7618 I agree. I loved my 4 banger.

@22fritts Ай бұрын

Even 28 years ago, it was starting to get kind of crowded in there, but it must be a breath of fresh air to have a vehicle roll in that you can actually work on. What a cream puff. I hope the rest of your week goes that well. You need one of those "That was easy" buttons from Staples.

@wallingj68 Ай бұрын

Great video! It's nice to have a job on a vehicle from "the good old days" once in a while. No scan tool, no "refrigerant leak so the radio, climate control, cell phone interface console has been disabled" nonsense, and it would be very unlikely that it could drive itself to the nearest EPA location to report the owner for contaminating the environment.

@wallingj68 Ай бұрын

And I always forget to add on a Huzzah!

@dans_Learning_Curve Ай бұрын

The redo introduction was definitely worth the price of admission!! 😀

@DortuAirCond_ACmobil Ай бұрын

Yeah

@ryanalexander984 Ай бұрын

I love those engines. I had a 99 s10 blazer and a regular s10. Loved those trucks.

@bryanphipps9131 Ай бұрын

Yes, the vortec version of the 4.3 in the mid sized trucks were very torquey.

@samsquires2877 Ай бұрын

One of the best engines GM ever made right there.

@Tommy-iz8vr Ай бұрын

I love your videos! Thank you so much. I was working on my brother's 2014 Miata with 9,000 miles, and I thought it had a bad A/C compressor bearing, so I bought another A/C clutch. Successfully installed it, started the car, and sent the clutch into low Earth orbit. Turned out the A/C compressor was seized up. Realizing I was completely out of my league, I sent it to my mechanic who does not have a You Tube channel, and he installed a new A/C clutch, and a new fan. The electric fan literally melted, causing the compressor to seize up. Live and learn. Thank you for giving me the courage to try.

@vicarod Ай бұрын

Just put a new compressor in my son's 2000 Silverado. Original compressor with 240k and 24 years on it. Bought Genuine GM from Rock Auto. Made in the US of A. Denso. Original compressor also a Denso from Japan.

@wk2268 Ай бұрын

My 1st truck was an '87 S-10 with the mighty 2.8Liter V6. Chevy Power!!!!

@rocketscientist007 Ай бұрын

I had the '84 S-10 Blazer with the 2.8L. It was too much trouble: not enough power to pass, oil leaks, ignition issues, body panel separation, paint fading. Sold it after 4 years. Lesson learned: No more GM junk. Toyota forever.

@bobsoft Ай бұрын

I had an 84 with the 2.8L That was a gutless engine.

@JRBRestorations Ай бұрын

Nice truck! I love these little S10’s. My son and I own a red 2000 s10 single cab, 4 cylinder , 5 speed, manual locks and windows. They are tough trucks. It is our shop truck used for junkyard trips, garbage hauling, or lawnmower hauling. GM really built a sweet little truck back in the day. All our “ new “ parts for it come from the U-Auto-pullit! We just installed a mint , GM bed liner for a whole $25. Plenty of torque, and reliable. So shocked to see one in this condition in the PRNY! Keep up the good work!

@anthonyfillion3231 Ай бұрын

1997 Me wanted this truck bad. The Sonoma SLS with a 5 speed and the ZQ8 suspension package. This brings back memories.

@I-watch-at-2x Ай бұрын

It's your videos that make it worthwhile to wake up nice and early.

@miketeeveedub5779 Ай бұрын

Ahhhh, 1998 - when men were men and trucks were trucks and installing an AC compressor wasn't rocket science. Sigh. They say you can never go back...but it's nice to reminisce sometime. Thanks for the video Eric!

@MH-ev3wr Ай бұрын

This video made me really happy. I changed out the compressor on my 1987 car and the forum police raked me over the coals for 1)Not replacing the receiver/dryer again which I had just done 2 years prior and 2)Not flushing the entire system first because of "all the metal shards that were surely in the system from the last compressor". Whew, it was sure a close one but I survived and so did the car. Still running after 5 years.

@spelunkerd Ай бұрын

Yes, I think it depends on the underlying cause. In this case it was a seal failure, not a mechanical compressor failure, so Eric made the reasonable decision not to charge more and replace more. It also was not completely exposed to ambient air and water vapor. New condensers have passages that are so fine, fragments of the pump can lodge there and in a genuine compressor failure many replace that, too. It's a confusing topic because when the compressor grenades the usual approach is to replace all the seals, the accumulator, flush it out with nitrogen gas, then do a long deep vacuum to boil off any occult water. I remember getting lectures from the forum police, but Eric has street cred so those guys usually defer to a pro who does this every day for a living. Now that professionals dominate the KZfaq landscape the keyboard warriors have calmed down.

@legogummybear5 Ай бұрын

Customer gets what customer wants. It's their money. Nice one Eric!

@COBRO98 Ай бұрын

To an extent. When someone comes to me with ebay or $20 offbrand parts I tell them to go elsewhere. Why? Because it either won't fit or they'll be back in 2 months for free warranty work.

@thehemiolds455 Ай бұрын

Sweet truck I had a 98 blazer ZR2 model 4.3 5 speed gear box love it 😎

@bbrnkyle74 Ай бұрын

I had a 99 Blazer 4x4 2 door 5 speed. Thing was awesome!!

@joejohnson7097 Ай бұрын

When you said mint condition, it is especially in that area. A lot of things in that Era were easy to work on. Thanks for the video

@Masterplan15 Ай бұрын

Man i feel old now, worked on my dad's S-10, and i had a glow worm as a kid

@SouthMainAuto Ай бұрын

I had a glow worm and a cabbage patch kid

@finwolf3375 Ай бұрын

The show car Gods are smiling down on you today for keeping that classic ready for the next judge. 😂Love your videos.

@TeemarkConvair Ай бұрын

a blast from the "past".. nice truck, well cared for,, undoubtedly on a pedestal 6 months of the year,,

@msclecarcrzy Ай бұрын

Man I would like to have that truck. Mint condition 98. Miss these days of trucks

@vancependleton8484 Ай бұрын

That's a real nice truck. 1998 GMC Sonoma with the 4.3L V6 and manual transmission.

@aaronkoivu Ай бұрын

2002 Dodge Dakota 4.7L with the 5spd manual was a under the radar fast truck

@nv1493 Ай бұрын

I rate this owner as a 10.

@jonclark1288 Ай бұрын

2 years ago, I had to replace the compressor on my Ranger for the same reason: leaking oil. I thought I could get away with replacing just the compressor like you did. But when I pulled the orifice tube, I found it was covered in metal shavings. So I did a total A/C overhaul: new condenser, accumulator, orifice tube, flushed lines and evaporator, and of course, new compressor. Moral of the story: always check the orifice tube even if the compressor is still working

@throttlebottle5906 Ай бұрын

yeah, oil accumulates and sits in the compressor, if it's leaking and someone keep adding charge, it quickly runs the system out of oil. we all know how well things work without lubrication :)

@Sandberm Ай бұрын

Love my 03 S-10 with the big 4.3. I bought it brand new and am less then 2000 miles away from the big 300,000. Stock engine, transmission and... AC compressor.

@medaugh Ай бұрын

11:25 I'm willing to bet that this vehicle will actually be in a car show. I mean how many mint 98 Sonoma's are there left in the world. Happy to hang out in the shop with ya today Eric O. Have a great weekend fella. Shit forgot about the bad battery. Dude is effed big time

@geordiegixxer Ай бұрын

What a nice truck to do that on.... so clean and easy to work on 😊

@NickMyers1 Ай бұрын

It's too bad GM doesn't make trucks like this anymore. Profits won't be as high, but demand is definitely still there... decent trucks. and Cold AC in NY already! Wow. Spring has arrived. Nice work as usual!

@paulchapin4472 Ай бұрын

It's guys like you that help guys like me take good care of our aging vehicles. I'm currently driving a 2010 Nissan Frontier Pro4X with 68,000 miles on her. Runs like a top.

@jamespearce7954 Ай бұрын

Great video. What a gem of a truck.

@mikechiodetti4482 Ай бұрын

Nice looking truck! Lucky for you there was an OEM compressor still available biggest\

@TXAG81 Ай бұрын

My first truck was a brand new 1985 Chevy S-10. Had the "big 2.8L V6" auto trans. The rear axle was a highway ratio, so she got great fuel economy, but wouldn't pull a greasy string out of a cat's ass. I drove it 10 years and then passed it onto my daughter. Great, simple little truck.

@mlsargent51 Ай бұрын

I made so much money doing the intake gaskets on these beasts! I miss the old days :)

@hankhessig6586 Ай бұрын

Almost to 900 K ...well done Mr. and Mrs. O!

@satamanschmidt3428 Ай бұрын

Eric, I'll never forget when I turned you on to Ranshu. You were crying about trying to find a compressor for a Mitsubishi and I said: "Eric have you tried Ranshu?" to which you replied "Who's Ranshu. " I said look in any copy of Motor Age they have four page ads printed on PINK PAPER right in the middle of the magazine where the staples are telling you they have any compressor made. I sort of miss our interactions. You were fun. Wonder where you're pal Pete with Advance Auto is now. Rock Auto fixed his problem.

@tooldiebum Ай бұрын

Looks great and the hood lights those were the days ✌️

@Mr2004MCSS Ай бұрын

Nice original truck. I'm very familiar with that compressor since I own two 98 full size chevy trucks that use the same compressor. When I re-did the AC systems on both trucks, I did not use HT6 compressors because of how often they leak where the two halves join. On my K1500 truck, I used a Seltec Valeo compressor that has a one-piece body and it's been on the truck since 2007 and the AC still blows very cold. On the K3500 truck, I used a Sanden compressor also with a one-piece body and it's been on the truck since 2009 or 2010 and is still very cold. For warranty purposes for both compressors, I had to replace both the accumulator and orifice tube on both trucks. I was taught to replace both of those things anyway any time you replaced a compressor.

@MrGardman Ай бұрын

Nice seeing you get a somewhat easier job this time.

@alex1949 Ай бұрын

I love these trucks, especially how much easier it isnto work on. I still have my 96 5 speed s10, bought it in 97. Was my daily until last year. With 500k miles, not nearly as mint as this one. 😢

@donburton2407 Ай бұрын

Good days are always rewarded with a trip to the ice cream shop.

@oldbiker9739 Ай бұрын

I still own a 2005 2dr blazer 4x4 very happy with the little 4.3 she's a keeper .

@jrbpit1 Ай бұрын

My son had a 2001 Chevy S10. Great little truck. Had to replace the front main seal, the intake manifold gasket, fuel injector spider and distributor. The oil pan bolts will loosen, torque those suckers down to factory spec before any are lost. We sold it with 265k on the clock and the guy that bought it was glad to get it. I got pretty good working on it while my kids were going through school.

@NobodyUR Ай бұрын

Ahh the old Sten lol, i remember everyone and they brother had one with a rotted out bed in the 90s when I first started driving . I went with a ford ranger. That and the Tercel I had before it were practically indestructible. Don’t get that same feeling from anything I’ve owned since lol

@brianpiper3188 Ай бұрын

I had the same thing, only mine was the GMC Sonoma!

@wingman8447 Ай бұрын

Miss those days. Nice video.

@andries4561 Ай бұрын

What a beautiful vehicle

@Alboalt Ай бұрын

That's a nice location for the compressor. Good job, GM engineers.

@janetcoursey6756 Ай бұрын

Nice to see an older vehicle without the rust!

@hotflashfoto Ай бұрын

I hope you continue to have a long career of helping others while also sharing your good attitude and cheery disposition with us. Oh, and the lessons! Love 'em!

@user-tl2bu4jt2w Ай бұрын

Wish you were around a few years ago, learned quite a bit. Back then, had a CR-V with a bad compressor. Dealer wanted $$$$ to replace so I ordered a look-alike compressor from Ammazin. It was identical to the original in every way. Had all the tools except reservoir for old refrigerant but it was empty anyway. It even came packed with oil. Spent $300 total and had the car for two more years. Asked the dealer parts guy to show me the factory shipper box and it was ALSO identical to mine except for printing. I guess there's one BIG compressor plant in the PRC. Gr8 tip about the brake cleaner!

@kennethbode2017 Ай бұрын

I had a 90 Sonoma bought new. That one is really clean

@AMurph79 Ай бұрын

Oooohhh, that's a nice S10. If that is all factory, then it is a ZQ8 package - lowered a little, better suspension and front and rear sway bars stock. Being that it is a 4.3L with a stick, then it also has the 8.5" rear axle (which is the same as the full size Silverados and such, just narrower), instead of the 7.5"/7.625" that comes in most of the S10's. Very nice !

@allenstautz9506 Ай бұрын

Love the 'heartache' of America!! Great job!

@robertmiller341 Ай бұрын

I've been wanting one of these for years 4x4 with a manual transfer case. I would also take a Blazer/Jimmy/Bravada. One of these day when I have some money I would like to find one that has lived it's life in the south.

@Daveunruh Ай бұрын

Sonoma GT?!!!!! I’ve always wanted one. Compressor is the historic belly leaker

@bryanphipps9131 Ай бұрын

Man, those vortec series of engines were lightyears ahead of the old ones. They weren't perfect, but you could get some serious mileage out of them.

@JackS425 Ай бұрын

Back when the ac system would hold its charge for more than a season. This 1234YF refrigerant seems to be the Achilles heel of modern ac system design

@talesfromtheshop4164 Ай бұрын

Nice little truck right there.

@mikekarge111 Ай бұрын

I've been watching you for about 2 years and you're the kind of mechanic the cares about the customers car why can't you be somewhere in California too👍

@bensmith6051 Ай бұрын

Nice to see Eric O get a cake job, with new OEM parts on a mint 1998 rig!

@rogergoins8118 Ай бұрын

Great to see a vehicle easier to work on!

@DortuAirCond_ACmobil Ай бұрын

It cannot be denied, brother, that many spare parts are now made in China, including in my country😂.

@mike22446699 Ай бұрын

Pretty simple replacement. What I like when I see you rebuilding the rear differentials measuring backlash pinion depth now that's a skill set

@SouthMainAuto Ай бұрын

I have shown rear diff repairs though? Several of them 😂

@mike22446699 Ай бұрын

@@SouthMainAuto absolutely and your the best. the old school way.

@buffsheeri Ай бұрын

Amazing you could still get parts for it, you hear you a lot of tales of new vehicles with part supply issues

@WouterB76 Ай бұрын

Such a perfect day, install a compressor in the shop.

@avitiello100 Ай бұрын

Mr. O, I noticed you didn't replace the dryer. I've always understood that it was critical to be replace when ever the AC system is exposed to the atmosphere. Great videos, thank you.

@NickMyers1 Ай бұрын

Don't believe all the hype. It's certainly a nice to do especially if the system has been open to the elements for years. but for what little time this has been exposed to...nah. It's fine. If you cut an accumulator/dryer open to see inside, it'll make sense why it isn't necessary. Even in instances where lets say a hose has a slow leak. Eventually you take in for service, they recover system. Replace part. Vacuum system, and charge. You wouldn't replace the dryer/accumulator. When its a car that's been sitting in the woods for a decade....yea, its time ha.

@user-hi3pt3mv2i Ай бұрын

people do not answer you correctly. and the person who did give reply probably has never used a micron gauge either. That gauge will let you no when you pull a vacuum if it is dry after your vacuum pull. if you are interested in facts check out hvac school channel, i no they do residential ac but all hvac systems have a few things in common one is getting moisture out thats what kills ac systems. so if like he said you dont have to, only the use of that micron will let you no if its dry enough and not have to change it. the key is the use of that gauge that no one in our industry is using, sad days

@ruley73 Ай бұрын

Most of the AC compressors for newer GM applications that I've seen at work (dealership) come with 40 ml of oil in them (according to SI 😆). It's always neat to see an old survivor (usually someone's toy, not a daily driver) come to the shop.

@josephmercer8101 Ай бұрын

That 4.3 sure was a hell of a runner. Just about bullet proof.

@kendavis1198 Ай бұрын

Nice to see a GOOD AC MAN!!! Not many out there....

@dandennis8465 Ай бұрын

I had a 1993 S-10 Tahoe with the big 2.8L. 5 speed. Lived in Rochester and Maine until I moved to PA. First time getting it inspected in PA, the mechanic said she’s rusty underneath.

@efil4kizum Ай бұрын

how rusty crusty was she?

@davidharrison3173 Ай бұрын

It’s a classic like you Mr. O.

@petermccoll469 Ай бұрын

great video. Nice straight forward repair.Perfect!

@steveboone5450 Ай бұрын

Sweet truck in mint condition. Glad to see a mechanic give top shelf treatment to a truck that is clearly treated well by its owner.

@tracydiller9378 Ай бұрын

Another great video Eric O. You never let us down!!!

@pjimmbojimmbo1990 Ай бұрын

I guess that Neighbour was able to finish cutting the Log... At least the Compressor is Easy to get at

@dddevildogg Ай бұрын

One thing to remember when using a chain saw If you're not making chips (even at the highest RPM's) You're not cutting wood But like Mr.O said We can't all be Einsteins This is a dangerous man and will probably hurt himself

@greggc8088 Ай бұрын

"Battery from the Dollar General" 🤣🤣 I'm looking for that product the next time I walk in one. Maybe they sell some deep cycle trolling motor batteries too.

@98ChevyK1500Z71 Ай бұрын

Nice little truck! I have a 98 K1500 5.7 and S10 ZR2 5spd. Love both trucks. They don't see road too often anymore, unfortunately. The K1500 was my first vehicle. The S10 was my winter beater so it's not nearly this cherry, but I'll still never sell it.

@NOELTM Ай бұрын

Nice repair of a nice truck. Thank you !!

@Danzilly Ай бұрын

4.3l was a good engine sad it went away.

@notajp Ай бұрын

Drive a 99 Sonoma 4x4 as my daily. Pretty decent truck other than the cluster that has mind of its own. And yes, believe it or not the A/C still works after 190k!

@Bizija123 Ай бұрын

A lot of these were made in the Linden, New Jersey GM plant back in the day. Used to live there. Plant closed down long while ago. Owned a 96 blazer 4 door as well with the 4.3 and it was very dependable vehicle.

@garysgarage3669 Ай бұрын

I have a 96 GMC Jimmy with the 4.3 and well over 300,000 miles. I still have it because I want to put a plow on it. The rocker panels are pretty well shot. Living in northeast Wisconsin.

@rickcoleman8903 Ай бұрын

You make it look easy nice job.

@DrLee65 Ай бұрын

When you said, the guy wanted only oem parts but had a Dollar Store battery, I also choked on my coffee from cracking up laughing, I saw that cheap battery too, lmbo! 😂

@NicholasAndre1 Ай бұрын

I was gonna say those HT6 compressors were pre-programmed to explode at 85k but this one didn’t even make it that long. Mine was absolutely oozing lol.