2017 GMC Denali: Service Suspension System

2017 GMC Denali: Service Suspension System - Total Hack Job

Рет қаралды 578,559

2 жыл бұрын

In this video I have a look at a 2017 GMC Denali that came in with the "Service Suspension System" light on. It doesn't take long to find this truck has been "touched" in all the wrong places and is only a short time away from the crusher.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

Пікірлер: 2 000

@ddognine Жыл бұрын

As a southerner, all that rust on a truck only 5 years old and under 100k makes me wanna cry. Before I started watching SMA, I had never heard of fluid film or even knew why it existed. Now I know.

@red95gts 2 жыл бұрын

As a Southerner, the amount of rust on a 2017 model is terrifying

@royanderson1429 Жыл бұрын

Between the snow the cold and the rust, it's not very smart to live in the North.

@kevinerickson84 Жыл бұрын

😂 🤷‍♂️

@michaeldose2041 Жыл бұрын

@Billy Hatchet Yeah they should make the whole car out of plastic.

@michaeldose2041 Жыл бұрын

@Billy Hatchet Okay let me dumb it down for you. Steel is the main structural component of ALL cars. It's common knowledge that if you spray it with salt water and don't maintain it, it rusts. That's not an ''engineering'' thing.

@michaeldose2041 Жыл бұрын

@Billy Hatchet The grade of steel? hahahahahahahaha. You think high carbon steel rusts less? Not a metallurgist there are ya billy. The only cars that don't rust are because the owner maintains it. I drive a 96 Yukon and there is no rust. Steel lasts forever if you take care of it. Do I need to draw a picture for you?

@hobozazz8120 2 жыл бұрын

Hey Eric, just wanted to give you a big thanks for helping me continue to improve my fledgling electrical diagnostic skills. Recently worked on a car that had developed a dead misfire on one cylinder. Using your troubleshooting tips I was able to narrow it down to no ground on injector #3. Wiring diagram showed all the injectors' ground wires joined together before going to the ECU harness, so with a good ole' visual inspection was able to check the section of harness that #3's ground wire was located in and found the break in the wire along with several other wires that were severed or almost severed. Turns out the owner had accidentally sliced into the wiring harness while installing aftermarket audio equipment. Couldn't have done it without your help!

@williammason7092 2 жыл бұрын

He does help me a lot too Ben working on vehicles from the age of 13 and you learn a lot from younger techs 68 now and still working 6 days a week

@caduceus33 Жыл бұрын

Seems like installing aftermarket audio equipment is a major cause of wiring problems!

@jamesandrews1130 Жыл бұрын

We stand on the shoulders of giants.

@needleonthevinyl Жыл бұрын

24:30 Got to love it when you repair broken wires for a single complaint, and after you return it to the customer they call up happy that some other unrelated stuff started working again

@DonRRicks 2 жыл бұрын

First comment here. As a Texas boy, born and bred, I’m not accustomed to the catastrophic damage that we see on the under carriage of an otherwise nice truck. I’m always amazed at your patience with the problems, no cuss words and absolutely no thrown wrenches. This is the reason that I subscribed and watch every video WELL DONE SIR!

@shanesgettinghandy 2 жыл бұрын

Right there with ya, I can barely believe how crusty and rusty a five year old vehicle he works on is. I have a 1993, 1999, 2003, and 2006, and every single one is in way better condition than this truck on the underside. Salt kills.

@Dirtyharry70585 2 жыл бұрын

It’s called editing 🫥

@alfonsogobaleza7968 Жыл бұрын

I agreed no f word, which is fine. That’s why I enjoy watching and learning

@artvance8251 2 жыл бұрын

I owned an auto repair shop for 41 years and your repair was spot on. All young techs should be shown this video as training to diagnose and repair an electrical problem. 👍👍👍👍👍

@brianburns7211 2 жыл бұрын

You’re right start with the simple things first. As Eric says, powers and grounds first.

@user-sy8zq7jc5u 8 ай бұрын

😂😂😂😂 ese pendejo del eric de puro milagro encontró la falla!! Ni siquiera sabe usar el short finder!!😂😂😂😂

@IanSlothieRolfe Жыл бұрын

I had one of those tracing tools back in the 90s and they were pretty effective on cars then, that didn't have too many wires and the wires had thick insulation. Modern cars have many more wires in the looms and they are thinner and as such the signals couple with eachother more and render the tools less effective. I find it incredible they put so much electronics below the floopan. GMC must have a lot of confidence in the waterproofing of those modules and connectors. You'd think they'd want them inside somewhere dry.

@peetky8645 Жыл бұрын

built ion obscelesence

@sunbeam8866 Жыл бұрын

Only built well enough to get past the warranty!

@jimjardine4705 Жыл бұрын

Yeah! Looks like GM needs to use thicker wire in their looms!

@w8what575 Жыл бұрын

Why? Then u won’t need to replace that expensive part as often…that’s the money maker…

@williamallen7836 11 ай бұрын

It's not thinner insulation. It's the fact so many items share the same ground wire. So image you are trying to trace a wire that is powering something like a light bulb that power & ground side are constantly connected. The signal ends up traveling down every wire connected to that ground wire.

@assassin_asa 2 жыл бұрын

She's a lovely woman for you man, actually brings me hope that she knows exactly what's going on and understands exactly what you mean and yet plays it off like the internet is full of decent humans. I hope y'all are doing quite well out there, and thank you for being a rarity

@JamesP33R 2 жыл бұрын

Funny part is that the detector actually did find the break. ;) When you were going along the plastic tubing, it got faster, then just stopped. The spot where it beeped the fastest is the open end of the wire. If you look at the video, you were right next to that opening in the tubing where you found the crusties, when the beeping got fast, then stopped. But yes, there is definately a fair amount of finesse to get used to those things and to get them to be more easily usable. Back-up eyeballs always do the trick. Best, as always.

@bradyc1450 2 жыл бұрын

Like the channel

@maarten1164 2 жыл бұрын

The detector actually found shit.

@jmathis3 2 жыл бұрын

I noticed that too. I’ve never used a tracer like that, but I thought it was definitely trying to tell him something. Either way he made short work of turn diagnostic and repair.

@beaviswashere8009 2 жыл бұрын

Once you got under that truck, I was thinking you meant 2007 not 2017. Holy rust belt Batman!

@danielclawson2099 Жыл бұрын

It's nice to see you working on newer vehicles. The reason WHY you are working on newer vehicles is terrifying.

@1QKGLH Жыл бұрын

Born in the north, worked in a dealership and a indy shop and came to HATE salt on roads. I'm in the south now. Being able to remove exhaust bolts in a 10-year old car is still mind-bowing

@scottgm321 2 жыл бұрын

Don’t forget to remove the new batteries from the probe thingy so you can use them in something more useful. Thanks for the video.

@Dirtyharry70585 2 жыл бұрын

Those energizers tend to leak, I’d pull them-

@kramnull8962 Жыл бұрын

@@Dirtyharry70585 Cannot say much for Duracell. Have a pack of 10 year AA batteries. Half of them corroded on the negative end within a year.

@G31mR Жыл бұрын

Yes. AND I'm surprised that tester sat for as long as it did without being damaged by battery leakage

@johnsteger 2 жыл бұрын

Eric says "Like my wife this fuse is supposed to be HOT at all times" 😅 Legendary

@Chevymacjr Жыл бұрын

Eric, your teachings in the dying art of troubleshooting is encouraging. Please keep up the great work and keep sending down your pearls of wisdom.

@simonjones7785 Жыл бұрын

nice to see the lovely Mrs O out in the shop, solder solder solder and plenty of heat shrink action

@simonparkinson1053 2 жыл бұрын

I use a LAN tone and probe kit a few times a week for finding the green crusties. It's an audible tone rather than a beeper that speeds up like that you used. You mentioned that the whole harness acts like an antenna. Here's a top tip! What I do is apply the tone generator between the wire and ground, then the next step is the important one for success: Ground the other end of the wire! That makes sure you get a full voltage drop across the crusties, otherwise the signal just goes straight on through the crusties. In "busy" harnesses, it's usually best to apply the tone generator at the end you think the fault will be closest to. This also helps minimise signal transfer to other wires.

@SouthMainAuto 2 жыл бұрын

Okay I see. That would make sense when you're looking for an open and there is that possibility of it being a high resistance from a giant pile of green crusties. Duly noted I will revisit this 👍

@yhird 2 жыл бұрын

Thanks Simon. Great tip!

@EmptyPocketsTrapping 2 жыл бұрын

Would like to know more on how to use a tone generator

@pl5882 2 жыл бұрын

Sounds like good info. I’d like to see a vid because I’m not sure exactly how this would be done.

@scrappy7571 2 жыл бұрын

Thanks Simon, will give this method a try. In this case. the fuse would be pulled, circuit grounded at the fuse box. And the signal injected at the chassis module connector, since that end had some questionable areas.

@elcheapo5302 2 жыл бұрын

Eric: This is an old truck... Me, still daily driving my 1998 Ram: 😳

@lalitoojos Жыл бұрын

In the salt belt?

@elcheapo5302 Жыл бұрын

@@lalitoojos Yep. Rust on the bumpers and just starting on the bed over the wheels. Had the door bottoms fixed. Other than that, it's been amazingly reliable. Original owner.

@ryansaunders5418 Жыл бұрын

I love the "classic visual inspection" to start the day. Love your videos, always top notch!!!

@edchenal821 Жыл бұрын

Your videos are very real. That is what makes them worth watching....

@steveearwig 2 жыл бұрын

Ex-'phone company here, cable pair identification works great on a balanced pair yes, but on a car where most if it isn't they're pretty much useless. Saying that I think this did its job, forcing Eric O to survey the whole length of the wiring loom, but a banana would've worked just as well.

@2-old-Forthischet 2 жыл бұрын

I can just see him using a Sidekick. Retired Ma Bell 15 years ago.

@stevenakn1 2 жыл бұрын

😂😂

@k1n2g4 2 жыл бұрын

As an active cable tech.. these wire tracers are absolute rubbish. Pretty much common sense is the only thing that works.

@navvet4518 2 жыл бұрын

Agreed! 35 year telecom guy here . The old school method is the best in this situation. I still use my buttset for troubleshooting complex VHF radio systems. No dB meter for me.

@svengonzales2664 2 жыл бұрын

😁

@petermclaren7276 2 жыл бұрын

Here in Scotland we appreciate your translations for aluminium and solder, you sir are a man of culture.

@Teribus13 2 жыл бұрын

Aye that we do. Next he'll be spelling tyres with the y rather than an i 😂

@petermclaren7276 2 жыл бұрын

@@Teribus13 With a user name like yours, you must come from Hawick. My mother’s home town. Safe Oot, Safe in

@Teribus13 2 жыл бұрын

@@petermclaren7276 you are correct, born in Edinburgh (the maternity ward in Hawick was full when my mother went into labour), raised in Hawick but now live in Selkirk these days.

@paulcross8190 2 жыл бұрын

Hello from Australia. Job well done, I enjoy watching your videos and like how you don't complicate things, very much real-life and years of experience.

@johnerway7255 Жыл бұрын

This was interesting, finding the spot come so easy for South Main Auto Eric O. Thanks for sharing this fix. Yes, thanks for the addition of Mrs. O, she is a keeper and you know it.

@chrissmithz314 2 жыл бұрын

This reminded me a lot of your video called "Don't Be A Dirtbag Mechanic - Take A Little Pride In Your Work" from September 20, 2019

@frankhartford5194 2 жыл бұрын

As a mechanic in the earlier stages of owning my own garage. I learn so much to put in my arsenal from you Eric. Thanks for making these awesome videos

@mikemarshall1394 Жыл бұрын

You my friend are truly the official rust belt wire whisperer.

@Yawwee 2 жыл бұрын

Good thing for bad service exploration work, it enables you to find the right spot and see the crusty wires that were never sealed properly !!! Good diagnosis and repair, Eric. Nice of Mrs. O. to visit and add her 2 cents. And Luna the kitty always has a good word about you whenever you call her name - love it !!!!! On to the next one !!!!!! 😀😺

@gnohn9366 2 жыл бұрын

It’s always interesting to see how a professional mechanic goes about the troubleshooting process to find the problem. Unbelievable frame rust on that vehicle.

@BigJohn4516 2 жыл бұрын

Chevy truck frames of that vintage disintegrate pretty quickly up here. The goo the factory puts on just speeds the process.

@charlespryce7067 2 жыл бұрын

All of the truck are rust out that is a shame that they can't build a good truck there All junk

@Bobbywolf64 2 жыл бұрын

@@BigJohn4516 It isn't limited to Chev. I have a 2018 F150 with the all aluminum body. Guess what? The frame is very rusty, and very similar to this chev. I am on the east coast as well, up in canada, and the salt is brutal on everything.

@mmaaddict78 2 жыл бұрын

This happens to every vehicle in the rust belt unless you fluid film the undercarriage religiously every year.

@fixitallpaul4847 2 жыл бұрын

@@BigJohn4516 I spend most days working these rust belt crusties. Needle scaling and rockers. Its a dirty job but it pays well.

@bobmcdoggish9659 2 жыл бұрын

Another awesome fix. A tip-o-the-hat to your skill set. And, yes, we come to see Mrs. O, not you.😀

@frankish5314 Жыл бұрын

Sure glad I live a salt free state! I've scrapped one car at 20 years old with zero rust and my 33 year old F250 farm truck has light surface rust on the frame! Now if my Chevvy Cruze ever stops leaking coolant life would be perfect..:). I love how Mrs O delivers sarcasm when she tells you how impressed she is.. Mrs F does the same, it keeps us humble.

@user-jo1qq7di6f 9 ай бұрын

As always Eric you came though with the answers to fix the problem trouble shooting this ole rusty beast a good visual inspection sometimes will aid in fixing the problem .Love watching your videos and your tips .

@vincepalaa 2 жыл бұрын

Wild how only 5 NY winters turned that frame into a science experiment. Seasonal Fluid Film application should be taught in Junior High.

@Rhaman68 2 жыл бұрын

Farm vehicles get exposed to moisture, mud, road dirt moved by tires at high speeds, etc. year round. Add the low (er) metal protection used by vehicle makers and there’s the answer. My only Ford product 2008 Mariner SUV, mid western urban life, rusted frame and components by 2018. 10 years. Just inadequate Ford engineering. Never again, Ford.

@vincepalaa 2 жыл бұрын

@@Rhaman68 Growing up in Mass it was a part of life. Before Fluid Film it was bar and chain oil mixed. Fluid Film doesn't last as long but it's easier to work with and smells much better.

@kellykonoske91 2 жыл бұрын

The idea of this truck in the scrap yard in five years is just amazing to me! My 26 yr old truck here in Western Oregon will live its life out as long as I take care of it and still want to drive it! No salty crusties here though. Todd the retired trucker.

@mikeske9777 2 жыл бұрын

The same here with my 18 year old Dodge Ram 2500 cummins. I was just under it today for my spring inspection. The underside is pristine I was under it for its oil change, fuel filter, transmission, transfer case and front and rear diff service. I did have to repair a couple wires going to the left rear door window switch in the rubber boot that goes from the B pillar to door but that a normal for that era Dodge. I go under to one thing I am constantly looking around for loose wires, anything leaking. I did find a lifetime NAPA shock leaking and I have the receipt so I pull it in the next week and take that in for NAPA to take care of it. Of course I save money as I do all the work myself and since I am retired I find anyway to save money.

@MARKE911 2 жыл бұрын

Living in South Arkansas, I'm quite sure Snow Is a mythical creature that appears only 1-2 times a decade to close everything down and cause hundreds of wrecks per mile. We are talking 1-2 inches that might last 24-48hours.

@remondro Жыл бұрын

WOW !!!! What a diagnosis and repair of a seemingly impossible to find issue.. Just goes to show that your patience and perseverance pays off. GREAT JOB.

@pipercessna3827 2 жыл бұрын

Mr O, I always tell people that it is better to be pissed off then to be pissed on. It works for me and *Thank You* for the entertainment and educational content in your videos. They are greatly appreciated. 👍

@nonyabiz2777 2 жыл бұрын

We do love a Mrs O sighting now and then. Your eyes have to have scratches in the corneas from rust and dirt. I used to get mad at dirt and bit of rust but after watching your conditions you work in I never do now. In Colorado the rust is not nearly as bad. Nice work.

@coltcartel3108 2 жыл бұрын

Please put your cap on i can't cope 🤣🤣

@963ste 2 жыл бұрын

I have the same tool and have used just like you did, once and went back to just checking the loom for signs of wear. I'm not nearly as good with finding broken wires though. You make it look easy. Thanks for the videos!

@SmudgyContent 2 жыл бұрын

Eric ain’t lying… Mrs O is such a mystery. She only shows just enough to make it even hotter. Ontop it all she can Cook!!!‼️

@mitchs323 2 жыл бұрын

I've been where you were on this truck, I used to work for the WVDOH, and when I started, the wiring harnesses were maybe 6 to 8 wires going to the back. SRIC equipment is the worst, being in salt almost constantly from November to April. On the older stuff, we would completely rewire the beds and spreader box harnesses about every two years. I've seen more green crusties than I care to remember. Our biggest problem was somebody that would take a test light and probe the wire every 6 to 12 inches until they found the problem. then they would repair it leaving all the puncture in the insulation of the wire. A few days later it was back to what it was before, only all along the wire.

@throttlebottle5906 2 жыл бұрын

TERMINATED, is what they should have been. 🙄😬

@dendkmac 2 жыл бұрын

At the end of the day you have to do what works for you and your customer, reaching that conclusion can go a few different ways this one worked out for you. almost forgot I used one of them tracing things a few times I can never get it to work right and always ended up doing it by hand, you have such a knowledge base on this good job!

@thirzapeevey2395 2 жыл бұрын

You don't tick me off. You keep old cars running. You help people. I learn from you every time I watch. If the truck comes back and visits you, you have an idea where to start.

@mcc5917 Жыл бұрын

Love your commentary! Yes, came for the excellent approach to trouble shooting, but stayed for the show.

@glassvial 2 жыл бұрын

If Eric O keeps forgetting his hat, I'm going to have to start wearing shades to watch SMA! 😎

@Sam-pi6ch 2 жыл бұрын

We use salt in Michigan but that is just insane a 2017 is rotted like that.

@chrisneztsosie3061 Жыл бұрын

Thanks for your videos. When you say “if I can do it, you can do it!” Your videos certainly help with that.

@gatolibero8329 Жыл бұрын

Yes. We still get to watch Wes work another day. Stay safe sir!

@billbrown6889 2 жыл бұрын

You're right, we watch what you're doing in hopes that Mrs O will come out and help/comment! You r a lucky guy

@jack002tuber 2 жыл бұрын

I have a fox and hound type tool too, and I was never able to make it work for me. And your splices are good to go. I know you have been doing this a long time and you would know what splices work and what don't work. No callbacks when you splice, there's the proof. Another great job. A human broke wire sniffer. 🔧🔧🔧

@theusconstitution1776 Жыл бұрын

You’re right Mr. O we come here to see a little bit of you but we really come here to see Mrs. O and what she’s cooking today❤️

@davidsmith-ih2kk Жыл бұрын

Sometimes I'm glad I'm not a mechanic, especially when I just watch your videos because it's interesting to watch and not to critique your methods of repair, for myself I think its plain wonderful the way you repair cars, from diagnostics to finding the fault and eventual repair. It's not my job to watch and tell you a better way to do it I infact enjoy watching you fix a car your way and to be honest I don't have a better way for you to do it, I think it's just great watching you fix a car and your the kindest mechanic I have ever seen. Also no matter what you never piss me off no matter what you do, but your right I love watching your interaction with your wife and kids, your very funny. It's a pleasure watching you work. I used to think it funny the way you pronounce solder as soder, but someone from America once explained the reason, we pronounce Salmon as Samon so it's ok to drop the L in solder hence soder.

@billnone3173 2 жыл бұрын

I use both the wire tracer and peepers and paws... good job eric.... I think you should get into dowsing.... You definitely have a gift for it sir. always love your video's... when I grow up I am gonna do mechanical video's too!.

@kevincampbell8298 2 жыл бұрын

What ever works for each person is what they should go with! I am with you solder and heat shrink. I kept a couple of roles of the good ole 60/40 it never let me down.

@raymondchoate5687 Жыл бұрын

I have to say your method of troubleshooting is fantastic

@allenwelsch2839 Жыл бұрын

Watching work like this makes me glad I work on radios. That harness is several shades of no!

@9HighFlyer9 Жыл бұрын

Once again I'm so incredibly thankful that I live in Arizona. I have a trailer that's been mostly unpainted for years and it has nothing more than surface rust.

@Driving-the-Backroads 2 жыл бұрын

Yes, I work for the phone company and yes I can reliably find opens and shorts using a toner. It takes a little time to get to know your tools. While you can hear a signal on neighboring wires in time you will be able to discern the difference between crosstalk and the primary signal. Use your toner more often. The more you use it the more useful it will become.

@mikeferraro8917 Жыл бұрын

I’ve been soldering and heat shrinking for years as you have and never had issues with those repairs….so you didn’t piss me off!!

@kennethdamewoodjr8276 Жыл бұрын

Thanks for another great show, never a disappointment ! Keep up the great inspirational trouble shooting techniques that is above and beyond.

@upman664 2 жыл бұрын

Sometimes it's just time to call it on the harness. I work for an open pit Iron mine. We have so much mud the harness rubs on the corrugated wire loom and cuts the wires. We struggled until we found out we could purchase a complete harness relatively cheap and spend 4-5 hours to be trouble free for many more years.

@Spadedinthe801 Жыл бұрын

Eric, you are an inspiration. I know you probably won't see this, maybe Mrs. O will. You're videos are the most honest POV of working in the life of an everyday mechanic I have seen.(other than all the rust, good lord the rust I see on your channel is terrifying). Yeah that device is shotty. Even the Dynatech's the power company uses for underground big boy wires are never accurate. I am contracted with Pacificorp in Utah running a Vac Truck and even the stupid expensive Dyna's suck. I would love to see a collab with Rainman Ray if that would every be possible. He's my other go to of no nonsense Honest repairs. You guy's have inspired hundreds of thousands if not millions to tackle their own vehicles instead of forking out their own hard earned money for sometimes simple repairs. Keep at it. Love ya from afar!

@geoffhoulahan9099 Жыл бұрын

I love the commentary, you always add a bit of humour no matter how bad the situation. Keep it up Mr O

@David-cm7jl Жыл бұрын

Pretty sure your the only real channel on KZfaq. All others are click bait and lies. Love your channel! Very informative and fun to watch.

@thegmguy1 2 жыл бұрын

Your findings are why I am more willing to diag and repair my own vehicles. To many sloppy hacks out there and the dealers are extremely guilty of that.

@srautollc6831 2 жыл бұрын

The best notification of the day! Love me some SMA

@edwardhugus2772 2 жыл бұрын

So true.... come to watch you work, and learn, but honestly hope to see the lovely Mrs O.

@petersallander6913 Жыл бұрын

Yes Eric I learn a lot from you but it is nice to see Mrs O she's a very pleasant person.

@Stover1928 2 жыл бұрын

I have always wondered how effective the wire tracers would be on a auto. You have answered that question for me in spades. As always you are a genius! Loved the video.

@mikeske9777 2 жыл бұрын

Yeah I almost bought one about ten years ago and one look at the price for it and I said no thanks as I still have the scope on a rope and back probes that will do the same thing along with the 4 eyes I have, glasses and eyes work well for the past 45 plus years I worked on vehicles and aircraft

@SteveP-vm1uc 2 жыл бұрын

I had one back in the late 70's early 80's and they were even junk then.. Far less wiring and wire insulation that would all fade to a yellow/white, so chasing was a mother.. But yeah, even with few wires in the harness they were junk.

@dwb812 Жыл бұрын

Also, you can use a miliamps test to locate a break in a wire if you know which one you want to check. Old school electrical trounleshooting is faster once you know the techniques. Trouble is, learning them takes time and effort...something people have no "time for" in our "instant gratification" society.

@floorpizza8074 2 жыл бұрын

"They come to see me, but hope to see you..." Nothing better than the two best things in the world at once... working on a car, and seeing a beautiful woman. You've done very well. On the soldering topic, I've switched over to crimp connectors that include a built in piece of solder. You crimp the connection initially, then melt the solder piece and surrounding shrink wrap in one go. Like all things, there are people that swear by these types of connectors, and others that swear *at* them. Personally, I think they're great. Oldest one I have in use is now five years old, and still works fine. Edit: Dang, all I had to do was play one minute more of the video, and I'd see you're using something very similar. The only difference is the ones I use have a place to crimp them, too.

@normanmonroe3758 Жыл бұрын

i really like that you are meticulous with your work, and also work as if it is your car/truck you are working on.

@jaybailey8044 Жыл бұрын

Whatever way you choose to make that wiring repair is the right way in my opinion, yes it nice to see Mrs. O.

@54leedaley 2 жыл бұрын

I've been on all sides of the debate. For many many years it was twist solder and shrink. Then I was told that on boats it should be crimp because solder would make the wire stiff and it would break from vibration (what about salt water?). Then I found the solder and seal connectors and have been pretty happy with them. But all in all, solder and shrink has never failed on me.

@wssides 2 жыл бұрын

That detector reminds me of the powered test light that was popular a number of years back. You didn't need a ground- touch the probe to the copper wire or terminal and your other hand to any metal part of the car- if it beeped and flashed you had voltage. Great! BUT the voltage could be going though greenies that won't carry enough current to do any work- like operate a trailer light which was what I was usually trying to repair.

@yoshy4072 2 жыл бұрын

I had a 81 F150, no start in my driveway one morning. Called a tech who comes to you. Fuel pump wasn't turning on. Got er fixed up. Over the next 7 years 5 more break downs, everywhere he probed the wiring harness he poked a hole in the wire insulation and one by one they all corroded. Canada lots of salt. Taught me a lesson

@rick980 Жыл бұрын

There are so many hacks on you tube and in(real) life that will do very controversial repairs. You on the other hand i have to give respect to. For 1 you seem to care about helping your customers save money which nowadays is what is required to stay in business. 2 you seem to be a lot better qualified than most i have seen! Way to go and keep up the awesome job

@fredflintstone8048 2 жыл бұрын

I've used those signal tracers during my career not only in automotive applications, but also in industrial controls settings where there were large wiring trunks, and I had the exact same experience as you described. The signal is induced onto the other wires in the harness and will lead you on a wild goose chase. It takes quite a bit of practice and playing with the sensitivity on the receiver. I've also use some where you can attenuate the signal on the transmitter side as well and that can be helpful. Bottom line: They can be helpful when used with a little practice but are not as good as advertised.

@shadetreemech290 2 жыл бұрын

Even as an electronics tech. I tend to agree.

@SocketSilver 2 жыл бұрын

They work great for network cabling. The big difference is a network cable has only 4 pairs of wire. So it’s a lot easier.

@timdeibler4 2 жыл бұрын

Same experience using it in a harness. We wire guided forklifts where one wire is in the floor and it works great for finding the break

@fredflintstone8048 2 жыл бұрын

@@timdeibler4 I agree that in some applications they're the best possible tool to use.

@rhavasy 2 жыл бұрын

@@SocketSilver And the twisted pair structure of network cabling is used specifically to reduce cross-talk between the pairs, to the signal induction is minimized. Maybe as cars & trucks become rolling networks it's time for manufacturers to start wiring them like networks and not the same way they built cars in 1970.

@GetReal3327 2 жыл бұрын

I like how you always tell it as it is. Thank you:) Old homeschool DIY car mechanic trying to keep up with the times. Just got my first diagnostic tool because my old Dodge Ram Minivan didn't have a OBD port or computers that died in 2021 with over 300,000 miles. Now that I have a 2008 Chevy Cobalt LS 4-door 2.2L, now it's time for this old fart DIY car mechanic to go back to school. lol

@minotaurbison Жыл бұрын

I atoned for my wiring sin thanks to you, a video you made some time this year showed you repairing a pigtail using your soldering iron... I had put a new pig tail on my old truck that the old one had corroded up using wire nuts and electrical tape.... after seeing your video I bought a nice new butane soldering kit and some shrink wrap... it's done properly now. Thanks for your videos, you help more than you know.

@garysgarage3669 2 жыл бұрын

Mrs. O isn't the only person impressed by you. I bought one of those sewing seam things and have never used it, my knife is just always more handy. Great fix!

@joshuagauthier2564 2 жыл бұрын

Love the videos Dr. O. Watched many and love the careful pragmatic approach to the problem. My project car has a mechanical issue, likely caused by something electrical (old OBD1), and I’m approaching it with a “What would Dr O do?”

@1fnjo790 2 жыл бұрын

Dr Oz would probably tell ya to go get The Boosta in ya Caboosta.😉

@RICHFO100 2 жыл бұрын

You are great you take it to the dealership charge your eyes out and still don't fix it you are the best 🙂🙂 stay safe 😊😊

@mcgunner02 8 ай бұрын

Erik, WOW, you are bringing back some "wonderful" memories! Sometime during the late '70s or early '80s, I was helping some friends maintain a salvage company's fleet. One '72 GMC RORO w/ 671 Detroit wasn't charging! Numerous parts had already been changed with no positive results, so, the routine became to recharge the batteries every few days and send it out to work. I finally had the opportunity to work on it and decided to back-feed power, which immediately yielded a "popping" sound. The "popping" sound came from a vertical harness running on the block. Taking a look at it, pulling the harness back from the block, and peeling back some insulation and wrapping, I found that a nut from the air box cover bolt had ripped through the harness. With that found, simple splicing and added protection to prevent a reoccurrence, and the world was right again....................!

@rogerdirks947 Жыл бұрын

Your commentary at the end about modules and gauges has convinced me to continue driving my m2005 Lesabre. And most of you that read this comment probably know what engine that has.

@mph5896 2 жыл бұрын

Fox and hound, I use it to track where the wire goes. Plus you can find the wire in a connector of wires easily without pulling the diagram. For example, abs harness. plug the tool into one of the speed sensor wires, go to abs module and find out where its at in the connector in a matter of like 2 minutes. Helpful if you don't have a connector diagram or don't want to spend the time pulling it. If the wire is almost completely broken (or green crusty connected), they seem to still transmit through the wire.

@BillinSD 2 жыл бұрын

Sensitive electronics should ALWAYS be mounted outside the interior of the vehicle /s

@zx8401ztv 2 жыл бұрын

Manufacturers have to create secondary incomes from all the failing parts :)

@BillinSD 2 жыл бұрын

@@zx8401ztv TRUTH - Isn't Detroit in the rust belt????

@gillgetter3004 2 жыл бұрын

I’m in Detroit, just as bad as upstate NY. Gotta keep us workin!!!

@moconnell663 2 жыл бұрын

In my Subaru EVERYTHING is on the inside, even the brake lines. I've never needed to replace more than the last 6" of any brake line. I've never had a wiring problem. (Though I did need to replace a rotted fuel tank)

@joes2085 2 жыл бұрын

Outside the interior???

@TheMotoracer838 2 жыл бұрын

Great video and one of the best examples I've seen for some people not working on their or others cars.

@paulmcclain920 10 ай бұрын

Mrs O, I am always glad to see you.

@richardcook9738 2 жыл бұрын

Thanks!

@chrisfreemesser5707 2 жыл бұрын

Good Lord...I've lived in NY my entire life and even I'm appalled at how rotten that frame is after only 5 years 😳

@repro7780 2 жыл бұрын

Thats what I said! wow, 5 years, 80 some odd thou miles. Sad....

@bradfa 2 жыл бұрын

The body and engine compartment looks pretty good. It’s just the frame that’s all rusted out. So GM knows how to rustproof, they just choose not to do it on the frames of these pickups.

@OnusofStrife Жыл бұрын

I was thinking the same. I'm from CT and was and this looks worse than my 1990 f250 that came from NY and has 360k on it. But as I understand it GM still doesn't bother to paint their frames. They just wax them which doesn't hold up.

@jackkreighbaum783 Жыл бұрын

I watched this in May '23, and I agree with you: we watch you doing critical work and hope to see Mrs. O.

@dontblameme6328 Жыл бұрын

"Classic visual inspection" starts with check-in on the family. I love it.

@freetolook3727 2 жыл бұрын

@2:10 Great planned obsolescence design, put electronic modules where they're most susceptible to water and salt corrosion!

@clifficus 2 жыл бұрын

Eric, solder joint connectors are perfect, used in aircraft production for many years, though not twisted, just inserted then soldered with a heat gun, if it’s good enough for the FAA and for me to put my stamp on. That’s fine by me.

@leebarnes655 2 жыл бұрын

Only issue I have here is the use of non-lead solder in the low temp solders. It will unfix itself eventually so I treat that solder option like I do a bare crimp - it's going to fail so expect it. 60/40 or go home on my work.

@adobedoug2564 2 жыл бұрын

I left the industry around 2003-4. In those days solder connections in helicopters were unacceptable.

@snoopdogie187 2 жыл бұрын

I was thinking of fixing my jeep wiring harness with these. Not critical wiring, but in an area that needs to be small. It doesn't help that every used door harness has been made poorly and damaged with normal use already. I've played with them before and they seem to make a decent joint, which is already protected with heat shrink. The biggest issue might be that you can only find the cheaper chinese pieces online.

@djtechinics97dj37 2 жыл бұрын

@@leebarnes655 Dear Armchair warrior I believe you’re missing the issue here. It wouldn’t matter if you replaced the wire end to end and coated it with Harry Potters magic spell. Honestly the truck has reached its limits of use for its location.

@Bobbywolf64 2 жыл бұрын

@@adobedoug2564 They still are unacceptable for repairing wires. Environmental splices are used for that. There are of course some connectors that have wires soldered into them, but for wiring repairs, you are not soldering them.

@andrewbirrenkott5312 Жыл бұрын

I'm from Washington state, moved to Phoenix a year ago and love the weather here. Never have to worry about rust again! Love your content. Keep up the good fight!

@MicroSoftner Жыл бұрын

Sun screen anybody lol

@matthewriordan-solidaxlesa5810 Жыл бұрын

GM,s finest candle wax coated frame.

@ronaldsimmons8346 2 жыл бұрын

as Teddy said: “It is not the critic who counts; not the man who points out how the strong man stumbles, or where the doer of deeds could have done them better. The credit belongs to the man who is actually in the arena, whose face is marred by dust and sweat and blood; who strives valiantly; who errs, who comes short again and again, because there is no effort without error and shortcoming; but who does actually strive to do the deeds; who knows great enthusiasms, the great devotions; who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst, if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat.”

@zeno5689 2 жыл бұрын

Very well said

@scottsmrcka2769 2 жыл бұрын

This chip shortage may be the best thing that ever happened for GM. All those new trucks out there without half of the options they normal come with. Should produce roughly half the electrical failures you would normally expect from them.