Some of the jewelry pieces the process start with the polish. There are three steps of polishing using three different polishing Rouges or compounds, this step not anyone can do because working with rotary machine is very tricky. The gray polish is a Pre-polishing compound, and it is used to prepare the metal surface for next step of polishing. Which is the green and Red polishing, the green and red polish is used to shine and shade the metal. Some other jewelry pieces only need Ultrasonic and steamer. The process for those start with mixing the Ultrasonic liquid, or "The Forbidden Gatorade,” with water to get it ready for use. In this step the Ultrasonic machine send high frequency sound waves removing any dirt, dead skin, dust, and the polishing materials from the previous step. The ultrasonic bath is absolutely crucial so the cleaning process. Finally, is the steaming process (The steamer removes any leftover polish material and clean between the stones).