A Bathroom Vanity BIGGER Than Your Kitchen!

Рет қаралды 12,692

Fortress Fine Woodworks

Күн бұрын

Пікірлер: 56

@joeyr4869 Жыл бұрын

I'm glad you were able to get yourself a Cody!

@FortressFineWoodworks Жыл бұрын

Thank you. I am more than happy. He's a great friend and employee

@MaybeDave Ай бұрын

Been binge watching your stuff. Your attention to detail is absolutely inspiring!

@FortressFineWoodworks Ай бұрын

Thanks for binge watching! That supports the channel so much!

@jasonbissonnette2331 Жыл бұрын

I have said this many times and will say it again, your work is absolutely amazing and your videos are the best on youtube. Nothing better than early morning coffee while watching your videos!

@FortressFineWoodworks Жыл бұрын

Very kind! Thank you. That means a lot! I hope to get better and better so you can keep enjoying what you're watching.

@mspeir 8 ай бұрын

WOW! That is absolutely immaculate! Well done!

@FortressFineWoodworks 8 ай бұрын

Thank you for watching!

@dnthasslehoff 7 ай бұрын

Nice tip with fixing the fit on box joints, I’ve got a bunch of drawer boxes to do and I’m sure I’ll get the chance to test it out

@FortressFineWoodworks 7 ай бұрын

Yeah, we end up needing to use that trick more often than not. Thanks for watching

@StarnerWoodworking Жыл бұрын

impressive work man!

@FortressFineWoodworks Жыл бұрын

Thanks! I am grateful. Thanks for watching!

@Gosa000 11 ай бұрын

Wow ! Beautiful work ! Pleasure to watch .

@FortressFineWoodworks 11 ай бұрын

Thank you very much! Glad you liked it!

@megala9581 3 ай бұрын

I like your vedio before even watching you .may allah bless you with guidance and prosperity 🌻

@FortressFineWoodworks 3 ай бұрын

Im glad you like it! I wish you the best!

@calebsuhl2229 Жыл бұрын

Very Nice! I'll check in on you now and again. Definitely put in the video when you're doing a project for an Angi client. I want to see what kinds of projects they ask for.

@FortressFineWoodworks Жыл бұрын

Absolutely. Maybe at some point we can do a sponsorship or something.

@jordanbell3473 10 ай бұрын

You are so under sub'd it is criminal. great work man. love your videos.

@FortressFineWoodworks 10 ай бұрын

I truly appreciate it. The time will come.... hopefully. Thanks for watching!

@andrewshirley8702 Жыл бұрын

We all need a Cody sometimes 🤘

@FortressFineWoodworks Жыл бұрын

We really do though. Thanks for watching

@EvanDunville Жыл бұрын

Impressive results!

@FortressFineWoodworks Жыл бұрын

Thanks for watching!

@jedmc8419571 Жыл бұрын

I once commented that good content is worth waiting for. Excellent work as usual, and I'm sure the company of Cody is welcome, and an opportunity to relax a little on big builds. And it's good to see you laughing brother! Fond regards from Chester in the UK 🇬🇧

@FortressFineWoodworks Жыл бұрын

Thank you Chester in the UK! I appreciate you taking the time to watch my content and leave comments. Cheers

@mattelias721 Жыл бұрын

Wow, dude. Great execution. I love watching your professionalism while you execute your commissions. The fact that you make your drawer boxes out of solid material is a great indicator, and from experience I know just how much better the drawers turn out (structurally AND aesthetically). I always have to keep telling myself during your videos, "It's the customer's requirement, ignore the finish." Makes my eye twitch a bit to bury nice maple under paint, but... customer, right? Question: I've looked around at my local big box places and some specialty stores, but they don't seem to carry Codys... did you have to source your Cody online?

@FortressFineWoodworks Жыл бұрын

Haha thanks man. The drawers really do come out nice with solid maple. I totally get what you mean about the finish. Us woodworkers have a different appreciation for the wood itself. Although, as time progresses, I'm beginning to realize that it's all art and art is art. If the customer is happy then we are in business. P.S. Cody is actually AI. Just ask chat gpt and you can get one.....Thanks for Watching!!

@zephyr1408 7 ай бұрын

Infinity makes an 8” by 1/4” flat bottom grind blade ! I rarely use a dado stack or as I say “ DD” dangerous Dado Stack! I make my drawers and all dados up to 3/4 “ ( more than that the DD goes on and a cup) ?

@FortressFineWoodworks 7 ай бұрын

That's good to know. I don't see how that would be any safer than a dado stack. But it would be nice to have

@zephyr1408 7 ай бұрын

@@FortressFineWoodworks to me? It seems less grabby? And def easier set up ? Now I could be all wet on that one?

@scottweinbrecht2143 Жыл бұрын

somebody to "hold the other end" is handy!!

@FortressFineWoodworks Жыл бұрын

Haha I don't know if that was intended as a naughty joke, but it works! Thanks for watching!

@scottweinbrecht2143 Жыл бұрын

@@FortressFineWoodworks love your work, and content!!

@user-nh3he9ds4e 7 ай бұрын

Сколько часов в общей сложности ушло на весь процесс изготовления?

@FortressFineWoodworks 7 ай бұрын

I believe it took about 3 weeks. So 120 hours

@user-nh3he9ds4e 7 ай бұрын

@@FortressFineWoodworks спасибо. А пистолет покрасочный безвоздушный? Не видно бачка с краской

@davidm2645 Жыл бұрын

Cody...pay attention and learn from the Master! Oh yeah, and don't be late for work as your samiches will disappear and you will have only chips to eat. Might think about bringing your own TP and hiding it, too!

@FortressFineWoodworks Жыл бұрын

Hahaha that was funny. Thank you for bringing a hilarious smile to our faces. We appreciate you!

@danielrybin2006 Жыл бұрын

So it looks like you dado the face frame 1/4” deep by 3/4” wide to fit onto the face frame?

@FortressFineWoodworks Жыл бұрын

I dado 3/16 deep so that the pockethole screws have more to bite into. And the widths range from 1/2 to 3/4 depending on which panel is being connected

@danielrybin2006 Жыл бұрын

@@FortressFineWoodworks do you adjust the dado stack each time to accommodate for micro-variations in plywood thickness ?

@FortressFineWoodworks Жыл бұрын

If I have 75% 1/2" then I will just leave the dado stack at 1/2 and double cut for any of the 3/4 cuts. If it's 50% of each, I will switch the stack

@danielrybin2006 Жыл бұрын

@@FortressFineWoodworks no what I mean is we all know that 1/2” ply is not actually 0.5000” and that even between different manufacturers the widths will vary a bit. So how precise do you make your dado? Do you adjust the stack to be a tight fit to the plywood in hand each time (assuming slight variations)?

@FortressFineWoodworks Жыл бұрын

That makes sense. I make it loose by about 1/32 or 1 mm . So it usually works to make the dado exactly 1/2 since the ply is slightly under

@danielchua664 8 ай бұрын

Where's the countertop installation?

@FortressFineWoodworks 8 ай бұрын

Thats a great question. The contractor that did the bathroom had the countertop installed. So we werent there. Thanks!

@juansr1987 4 ай бұрын

Do you live in Colorado?

@FortressFineWoodworks 4 ай бұрын

Yes, Fortress Fine Woodworks is in Denver Colorado

@user-ip3yw8hc1k 7 ай бұрын

❤💥💥💥💥

@FortressFineWoodworks 7 ай бұрын

Thank you!

@tommurphy6058 6 ай бұрын

Beautiful piece but after all that work more original and unique pulls should have been used

@FortressFineWoodworks 6 ай бұрын

Everyone has their preferences

@StripLV Жыл бұрын

Sorry but this is a bad job. What is this ridiculous frame and that weird hinges for? It is ugly and not practical at all. 2nd, silicone? Really? On wood???. 3. And you never center the handles for the lower drawers. In your case only the top drawer handle is centered. The middle and bottom drawer the handle has to be up. The same distance to the top edge like your top drawer....

@FortressFineWoodworks Жыл бұрын

I really appreciate your insight. Those are great ideas. I didn't think about off centering the lower drawer pulls. Thanks for watching and I hope to hear from you again!