Adding The Golden Touch.
Рет қаралды 97,831
Күн бұрынPatreon - / fortressfinewoodworks
Fortress Shop - unlockfortress.com
This video will cover an extremely unique piece of furniture from start to finish. With elegant trim, fluted columns, shiny gold grills, and a walnut top, this one isn't worth missing.
0:00 INTRO
1:00 Cabinet Box
5:20 Elegant Frame
12:13 Panel-less Doors
16:47 Fluted Columns
19:46 Walnut Top
22:45 Run For My Money.....
24:14 Finishing
25:10 Assembly
27:17 FINAL SHOTS
BITS & BITS Affiliate links (at no extra cost to you)
1. Astra Coated 1900 Rabbet Bit 3/8 - bitsbits.com/product/1900/ref...
2. Whiteside 6001 set - bitsbits.com/product/6001/ref...
3. Whiteside 2000c Roundover Bit 1/8" - bitsbits.com/product/2000c-ro...
4. Whiteside 1550 V-Groove Bit 60- Degree - bitsbits.com/product/whitesid...
5. 425-SRB250 - 1/4" Up-Cut Ball Nose Spiral Bit - bitsbits.com/product/srb4-250...
6. Whiteside 2001 Roundover Bit 1/4' - bitsbits.com/product/2001/ref...
Products and tools I used in this video.
Blum Inset Faceframe Plates - amzn.to/47dOwhX
or - www.woodworkerexpress.com/blu...
Blum 1/2 Overlay (soft close) Hinges - www.woodworkerexpress.com/blu...
Metal Grilles (champagne bronze lincane) - amzn.to/3NLb3vA
Famowood Natural Filler - amzn.to/48zVChT
3m Fine Sanding Sponge - amzn.to/3truUt5
Bench Dogs Push Block - amzn.to/3UUfJ3d
Laguna Resaw King Blade (pick your size) - amzn.to/3Zoz9QT
Makita Palm Router - amzn.to/3UkXG6Z
Bosch Router (for router table) - amzn.to/3VDxROU
Festool 1400 Router - amzn.to/407N2E3
Festool DF 500 Domino - amzn.to/3M5kOUA
Festool Kapex - amzn.to/3QmiFq8
Festool ETS 150 Sander - amzn.to/3Fn8RWM
CMT Dado Stack - amzn.to/402ktb8
Rockler Glue Roller Bottle - amzn.to/404lkbd
Stanley Low Angle Handplane - amzn.to/400tHVi
MACHINES
Laguna Edge Sander - amzn.to/3TGivtU
Laguna Spindle Sander - www.woodcraft.com/products/ss...
Laguna Air Cleaner - www.acmetools.com/laguna-tool...
Laguna i Flux 5 Dust Collector - lagunatools.com/industrial/du...
Laguna J 16 Jointer - lagunatools.com/industrial/jo...
Laguna p25 Planer - lagunatools.com/industrial/pl...
@WoodcraftBySuman 6 ай бұрын
Trying to force that maple through the cut is the most relatable thing I haven't seen anywhere else 😂
@FortressFineWoodworks 6 ай бұрын
Hahaha funny stuff huh? I've done that like 100 times or more, and didn't even know about the shim thing for a while
@Mikey__R 5 ай бұрын
I had a badly kilned piece of walnut, I ended up ripping it by hand rather than risk it pinching. It was only a short rip, I wouldn't want to do that with a longer board. I've got a bandsaw but it's still in pieces in my kitchen after moving house.
@CorbinMusso88 6 ай бұрын
I love that the plan isn’t always thought completely out. Because things change CONSTANTLY. Wood behaves weirdly sometimes. Measurements can be a hair off. The customer can call halfway through and ask for a change. Hell…you could just feel off for a few hours and something changes because of that. Having a set step by step, screw by brad nail plan can lead to more failure and disappointment than being able to compensate and pivot in places to finish the project.
@FortressFineWoodworks 6 ай бұрын
Yes, that's exactly it! Figuring things out as you go is part of the art. Thanks so much!
@mattelias721 6 ай бұрын
@DeuceMoose88 - I've made entire pieces of furniture based on only one dimension. It's fun, and in a way, easier to do... relative measurements based on the work!
@FortressFineWoodworks 6 ай бұрын
I've done something like that too
@BradleyHilton1 6 ай бұрын
Beautiful cabinet. I really enjoy watching your videos. The narration and quality of the videos are so enjoyable, and your work is really incredible. It's also pretty cool that these are actual commissioned pieces rather than being made just for the video. I look forward to more of your videos.
@FortressFineWoodworks 6 ай бұрын
I really appreciate that! I think it's cool that there are real customers behind these projects too. Thanks for watching!
@marshallsnyder2364 6 ай бұрын
Beautiful piece Cory👏🏻👏🏻! Appreciate the uh-oh’s as well…we all experience them and glad no one was injured!
@FortressFineWoodworks 6 ай бұрын
Thank you! We are certainly glad as well!
@dmac5385 5 ай бұрын
Your project turned out great!! Just my two cents worth: when you glue up the fluted columns, use packing tape across the joint, add glue and then fold the joint together. I have used this method on everything from small boxes to large heavy columns for kitchen islands as well as wraparound grain for fireplace mantels. If you put just the right amount of tension on the tape you will get a very tight joint and won’t have to fill the divots left by the spring clamps. Love your channel!!
@FortressFineWoodworks 5 ай бұрын
Thats a great idea. I completely forgot about that trick when doing it! Thanks for watching!
@AN1Guitarman 2 ай бұрын
8:35 - The dominos I've used both had an issue where the clear plastic guide was not centered, so when I'd put two pieces together they would not be flush side-to-side. I ended up widening the screw holes and sanding off one side of that clear plastic piece so I could adjust it and that gave me perfect alignment and fixed the problem. I used the scribed marks on the bottom of the tool to line it up. Quite a glaring issue that a $1200 tool shouldn't have.
@FortressFineWoodworks 2 ай бұрын
Ya, I'm surprised yours needed that much fiddling to get it right. I had to do some altering to my kapex to get the fence straight too. It's annoying when it happens but 99% of the time everything is dead on
@AN1Guitarman 2 ай бұрын
@@FortressFineWoodworks I’d hope it’s rare for the price point. I have a Kapex that I can use (local Woodcraft) but I try to avoid it. Even with a great blade it just gives me so much tear out and an almost rounded cut, but my Rigid at home that I squared up gives me near-perfect 90° super clean cuts up 16” long. I just want to tell people to save their money and take the time to really set up their tools. Thanks for the response! I really appreciate all of your insight and work you put into your videos.
@FortressFineWoodworks 2 ай бұрын
Thank you for your experiences too!
@nikolavitorovic6857 6 ай бұрын
Glad to see your sub count growing. Great work as per usual. Happy New Year man.
@FortressFineWoodworks 6 ай бұрын
Thank you Nikola. You are a great supporter and patron. I appreciate you a lot!
@davidm2645 6 ай бұрын
The only thing I don't like about this video is that the customer wanted it painted. I am all about the natural wood look. Good on you Cody!
@FortressFineWoodworks 6 ай бұрын
Ya, I agree. Everyone has their preferences
@kirstenopalka3915 5 ай бұрын
The domino thing… it’s not just you. I went through the same headache. It’s unfortunate for such an expensive tool. Seneca makes a domino plate that fixes this issue - almost never comes off my domino. Hope that helps.
@FortressFineWoodworks 5 ай бұрын
Yep, that plate has no play which would help. Thanks!
@TheRedHandOfVictory 6 ай бұрын
People who don't do woodworking don't have a concept of how long it takes or how hard it is. The amount of prep, measuring, and accurate cuts to get several different boards to line up once assembled can be immense. What you made in this video is amazing. I made a desk organizer for my wife recently, not complicated at all. 40 inches long 3in tall and 12 inch deep. She wanted it quick so i pieced it together from wood I had on hand. She added a 2nd tier about halfway through which wasn't a problem, I hadn't started staining yet. All in it was a weeks worth of work working on it 1 weekend and a few nights during the week. Very short project. But still required a lot of planning and cutting and layout to get it to look good. Whenever I price stuff and people look at me like I'm crazy I tell them a project like that will require a table saw, miter saw, paner, glue up time, and sealing time. Everything that goes into doing that isn't free.
@FortressFineWoodworks 6 ай бұрын
It's a lot of things! I can't tell you know what's up! Thanks for watching!
@jeromewatel6925 6 ай бұрын
Bonjour, Très très belle réalisation, le tout dans un cadre et une ambiance zen... Bravo
@FortressFineWoodworks 6 ай бұрын
I'm glad you enjoyed it. Thanks for watching and commenting
@ZACZPA 6 ай бұрын
Fine woodworkers are another breed, very impressive, truly. I've recently undertook my first stain grade small piece of furniture and it really puts me in check. That said, the burnished corners of the miters with wood glue and screw driver technique is great - it's why I love watching other maker's videos. Are those drywall screws though?
@FortressFineWoodworks 6 ай бұрын
That's awesome that you are enjoying it! Yes, drywall screws are rated for plenty of force for what we need. If it was a walnut table build though, no drywall screws
@gregs.9045 5 ай бұрын
Beautiful piece
@FortressFineWoodworks 5 ай бұрын
Thank you very much!
@SuperWingman69 6 ай бұрын
Outstanding work and content creation! Is it just me, or does anyone else sometimes feel a sense of inadequacy when watching things be made by people who are this talented? Also, I often suffer from "analysis paralysis" and find myself mired in it. Tooling also has an impact on me, lack of it I mean. So glad I discovered your channel and subscribed. I'm in a single car garage that shares the household laundry. But, I love wood working.
@FortressFineWoodworks 6 ай бұрын
I actually feel that way when I'm watching other content creators as well. I'm sure it's natural for most people. You have amazing honesty, and feel free to watch some of my older content when I was also in a small Garage shop. Thanks for watching!
@chrisp.76 6 ай бұрын
Stunning cabinet! Nice video.
@FortressFineWoodworks 6 ай бұрын
Thanks so much. I appreciate you taking the time to comment!
@brianhawkins184 6 ай бұрын
Just recently found your channel and already love your channel and your work. Keep up the great work bro. Thank you for sharing what you do.
@FortressFineWoodworks 6 ай бұрын
I'm really glad you like it. Viewers like you are what make this channel possible. Thanks!
@brianhawkins184 6 ай бұрын
@@FortressFineWoodworks I lack creativity to create, but watching your work is already starting to get those creative ideas going in my head. For that, I can’t thank you enough. Have a great day and an even better 2024
@FortressFineWoodworks 6 ай бұрын
That makes this whole thing worth it for me. I love being inspired by others too. So glad you are getting those juices flowing
@Benmeglei1 6 ай бұрын
Talent drips of this man!! You are blessed my friend. Merry Christmas, Happy New Year to you and your loved ones. We’re excited to see what you will bring us in 2024.
@FortressFineWoodworks 6 ай бұрын
That's extremely kind, thank you. I know you're a long time viewer and I always appreciate what you have to say
@dennisboisen 6 ай бұрын
Finally! Really enjoy your work and upload episodes
@FortressFineWoodworks 6 ай бұрын
Sorry this one took a while. The holidays slowed things down. Thanks for watching!
@jasonbissonnette2331 6 ай бұрын
Another great build! I have been patiently waiting for a video from you lol! I too make those little mistakes like not pre-drilling, thinking it's not necessary, until I realize it is necessary lol! And I love my sawstop but I am so afraid of the accidental trigger. All the best to you, Cody and those near and dear to you in 2024. Cheers!
@FortressFineWoodworks 6 ай бұрын
Dude, you're awesome! Thanks for being patient! An accidental trigger may happen one day but it will be worth knowing that it works!
@David_11111 21 күн бұрын
just found channel very nice work
@FortressFineWoodworks 21 күн бұрын
Glad you found Fortress! I hope to see you around!
@Chezowan1 6 ай бұрын
I get the same issue with the domino not creating flush connections. One thing that seems to help is to very slowly enter the wood so that the bit isn't getting "pushed" by the wood and creating a slightly different path. The other is to be very careful about the downward pressure your pressing hand is making. Sometimes its difficult to press the domino inward without pushing slightly downward (or even upward) which might inevitably adjust the height at which it enters the wood.
@FortressFineWoodworks 6 ай бұрын
Actually, I was thinking the same thing. And that's why Cody gets more inconsistent joints because he hasn't gotten that feel yet. Thanks!
@michaelandrade1213 6 ай бұрын
So.... do t know if anyone noticed... but.... when the brass mesh hit the blade, it retracted. And the brass had a bit more than than a knick. THATS YOU’RE FINGERS PEOPLE.
@FortressFineWoodworks 6 ай бұрын
The only reason it took the blade a second to recognize it is because the aluminum has an anodized coating. So it wasn't grounding against the cast iron very well. It would act faster on a finger
@Onix64 5 ай бұрын
Just beautiful!
@FortressFineWoodworks 5 ай бұрын
Thanks for watching!
@chriswesley5488 6 ай бұрын
A secret drawer in the bottom would have been really cool
@FortressFineWoodworks 6 ай бұрын
So true. That's actually a great idea. Thanks!
@Jo-xg6rk 6 ай бұрын
Amazing work + well edited...new sub👍🏽
@FortressFineWoodworks 6 ай бұрын
Good! I'm glad you liked it. Thanks for the sub!
@raulsoto2088 6 ай бұрын
Increíble trabajo, te felicito 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱
@FortressFineWoodworks 6 ай бұрын
Thank you for watching!
@degrom542 6 ай бұрын
Happy I found your channel . You were made for this I,m jealous of your voice it's top notch just like your skills . Happy New Year.
@FortressFineWoodworks 6 ай бұрын
That's a great compliment. Thank you! I appreciate you watching and happy new year!
@nickyt3269 6 ай бұрын
really glad no one got brittany speared. this would be a good video for blacktail studios compilation of what could go wrong.
@FortressFineWoodworks 6 ай бұрын
We are glad too! That's very true! Thanks for watching
@danferguson3704 6 ай бұрын
Amazing as usual!!
@FortressFineWoodworks 6 ай бұрын
Thank you Dan! Hope you are well
@gXXrGoNe 6 ай бұрын
In regard to panel saws and lacking the same technology as a SawStop. True panel saws are operated differently than a traditional table saw. Their inherit design eliminates typical kick back scenarios. And their operations and design also keep your hands away from the blade, unless you aren't operating it safely, thus correctly. I think if someone has the means to purchase a true panel saw and are concern about safety, I suggest that you operate one before making assumptions that the SawStop is the only safe saw. Now credit where credit is due, and SawStop saws are nearly idiot proof, ensuring the function is ""ON". But with a panel saw, just operating it correctly and not taking short cuts (using jigs and clamps as appropriate), your hands are never required to be close enough to the blade to create an environment where an accident may occur, no matter how small the piece you are cutting.
@FortressFineWoodworks 6 ай бұрын
I agree, but sometimes I'm an idiot. So problem solved
@staceylewisdesigns 6 ай бұрын
This past year they released a couple panel saws at AWFS that had similar technology. Maybe more advanced as you don’t need to replace the cartridge. Felder should have it. I’ve been considering a panel saw as well and agree with the above statement but since I don’t currently have the space I should be going with Harvey later this year.
@MASI_forging 5 ай бұрын
Such talent and skill 👏👏
@FortressFineWoodworks 5 ай бұрын
Thanks for watching!
@stlwoodworking 6 ай бұрын
Good job my friend. Looks awesome!
@FortressFineWoodworks 6 ай бұрын
Thank you! I hope everything is going well in your neck of the woods
@stlwoodworking 6 ай бұрын
@@FortressFineWoodworks Not too bad 😁
@FortressFineWoodworks 6 ай бұрын
Heck yah! Happy new year!
@mspeir 6 ай бұрын
It's a shame to see the maple painted! 🥺 It would look so nice with one of the Rubio Monocoat light/white finishes. Maple has such a lovely, subtle grain. It's a shame to hide it.
@FortressFineWoodworks 6 ай бұрын
Maple is nice for either or. I wish I didn't have to paint either! Thanks!
@alanmatthews9260 6 ай бұрын
Re: maple tendon wood binding: seems to happen to me with maple a lot!
@FortressFineWoodworks 6 ай бұрын
Thanks for watching!
@mohdfathi8802 6 ай бұрын
Amazing content your channel is so underrated keep the hard work🫶🏻
@FortressFineWoodworks 6 ай бұрын
I appreciate that. Since you're taking the time to watch and comment, you're contributing to the growth. So thank you
@Mikey__R 5 ай бұрын
I really enjoyed watching this build! Thanks for sharing! Is there a reason you don't flip the guard down on the saw? If you've set the rip fence, do you need to see the blade?
@FortressFineWoodworks 5 ай бұрын
I appreciate your thoughts. It's just a product of filming. I want you, the viewer, to see. I have all guards in place when not filming
@Mikey__R 5 ай бұрын
@@FortressFineWoodworksthat's good to know! Thanks for replying!
@FortressFineWoodworks 5 ай бұрын
Thank You!
@neilteeter9600 6 ай бұрын
I had the same kickback happen to me (while cutting the same molding), but I wasn't so lucky. It hit me in the right hip and threw me about 10" backwards. I ended up at urgent care just to make sure it didn't break my hip. I had a hard time walking for a couple days.
@FortressFineWoodworks 6 ай бұрын
Yikes! That sounds rough. I'm sorry that happened to you.
@sunalwaysshinesonTVs 3 ай бұрын
Im pretty sure it's not the aluminum that triggers the saw. It's the current running through it + meeting the resistance of your skin that does. If your hands were electrically isolated from the aluminium, the safety shouldnt trigger.
@FortressFineWoodworks 3 ай бұрын
That's a great observation! I would say it's the electricity grounding through the cast iron since that is far more conductive than my juicy hands
@sunalwaysshinesonTVs 3 ай бұрын
@@FortressFineWoodworks Sure, that too, the main point being the current needs to hit the "resistance" (not sure if that's the correct word cause physics) of skin or similar like a hot dog. The saw doesnt activate by contacting something conductive, ie metal on it's own shouldnt trigger the saw. Metal + your hands touching the metal will. I think there's an article/FAQ on SawStop that discusses how the tech works. It's not triggered by conductivity.
@charleschi843 6 ай бұрын
17:20. Good time to use the blue tape trick when closing that long miter? Or, does that propose a problem when you can't see the spine of the miter?
@FortressFineWoodworks 6 ай бұрын
Yes that would actually work quite well if you dont have miter spring clamps.
@acrocha1222 6 ай бұрын
That’s gorgeous
@FortressFineWoodworks 6 ай бұрын
I appreciate it!
@floridabeardedwoodworker 6 ай бұрын
Great content and editing skills, I hope to get to your level someday. Thank you FBWW
@FortressFineWoodworks 6 ай бұрын
I truly appreciate that.
@DerekR-ul4me 6 ай бұрын
Norm always loved a good dado and they make assembly for one person much easier. How do you like that sawstop slider contemplating that or the Harvey. By the love the work.
@FortressFineWoodworks 6 ай бұрын
That's so true! I really like the sawstop sliding crosscut sled. It's easy to take off and put back on. It can get out of square from time to time though
@tharemyhopkins5873 5 ай бұрын
Very classy piece, excellent work! Just curious since you mentioned protecting soft eyeballs several times, any reason you don't wear glasses at the TS? Not hating, just curious.
@FortressFineWoodworks 5 ай бұрын
I actually just ordered prescription safety glasses for that reason
@stevehignett5701 6 ай бұрын
3:32 why is the dado so much wider than the vertical piece? It's offering no support and structural aids at all. It also isn't specifically placing the panel in the correct position, either...
@FortressFineWoodworks 6 ай бұрын
Because in a cabinet like this, I don't need that extra support. It's just for alignment. And fitting a perfect dado take twice the time as a looser one. My dados are much tighter on tower cabinets and shelving where the strength us needed. Thanks for watching!
@yvonboudreau3932 6 ай бұрын
Nice!!!
@FortressFineWoodworks 6 ай бұрын
Thank you! Cheers!
@SamWanamaker1 4 ай бұрын
Mind if I ask what paint sprayer you use? I can’t find it in description. Thanks!
@FortressFineWoodworks 4 ай бұрын
It's the graco x7 with a 308 fflp tip. amzn.to/49VKdts amzn.to/4bXRfQ9 amzn.to/43baq5e And the hvlp is an earlex sprayport with an apollo atomizer gun www.dipyourcar.com/products/advanced-dipsprayer-upgrade-no-gun?variant=14741902468?gad_source=1&gclid=CjwKCAiAopuvBhBCEiwAm8jaMW9MQVU2cjyjJKN3GdqsCQdBAn8vn0rsIsW3hdPXdjjVUcuggWia2hoCuIgQAvD_BwE amzn.to/3v0DfVh
@SamWanamaker1 4 ай бұрын
@@FortressFineWoodworks oh, so you use two different sprayers? Do you just use a different one for different applications?
@FortressFineWoodworks 3 ай бұрын
I use hvlp for solvent "oil based" coatings, and airless for waterbased coatings
@darrenlesueur4785 3 ай бұрын
Let me help you out . Order your doors from a good door company. It makes life so much easier. And don't over engineering if your customer isn't paying for it
@FortressFineWoodworks 3 ай бұрын
We build it all. 💪
@kristenmiller5931 6 ай бұрын
Hi Cody, If you don’t mind me asking, what product did you use to paint this and what size tip in your gun? This turned out beautifully!
@FortressFineWoodworks 6 ай бұрын
Hi Kristen, Cody is my employee, I'm Cory. We used 2 coats of envirothane 170 white primer. Sanded with 320 or 400 grit until buttery smooth. One coat of envirothane 200 White topcoat tinted to Dover White. You can get envirolak products from industrial coating suppliers. The airless sprayer is a graco x7. The tip is a 308 FFLP tip for everything. Thanks for watching!
@kristenmiller5931 6 ай бұрын
My apologies. Thank you so much for the response. Best wishes for the new year!
@FortressFineWoodworks 6 ай бұрын
Happy new year!
@StoneyMeyerhoeffer 6 ай бұрын
7:36 Only because you seem to be as pedantic as myself, I think that might be a groove technically, but I didn't find a good look at the grain direction in the video.
@FortressFineWoodworks 6 ай бұрын
Yeah, I call it a dado whether it's with the grain or across. Thanks!
@ronj8000 6 ай бұрын
what program do you use for 3d drawing? Thanks
@FortressFineWoodworks 6 ай бұрын
I use sketchup 2017
@zketizk 6 ай бұрын
Geeez... my OCD just thanked me for your work. What a masterpiece.
@FortressFineWoodworks 6 ай бұрын
That pesky OCD. I'm glad it's so thankful! Thanks for watching!
@TheRealDill93 5 ай бұрын
Hey man, so I have a question for you. And you’re just the guy that can answer it. So I’ve built many cabinets. With my dad who’s been a carpenter since the 70s. And how he prefers to do it is stick build it on site. We get pretty good results. But I’ve been in his ear about him letting me build them in my lil shop (my garage) My question is when you install, do you putty the nail holes and caulk the trim and then paint again? What do you do if the wall you’re installing into isn’t square,plumb, or level? That’s my dad’s main argument against building them off site. We do those things while we’re building. For example there is a little gap in your basecap in the finished product. Obviously it’s not been installed to finish yet. But would you caulk or putty a little spot like that? How do you go about installing and finishing the install?
@FortressFineWoodworks 5 ай бұрын
We use wax fillers for holes, then touch up with the original paint if necessary. For caulk lines we tape the finished product, caulk the seam, and immediately paint with the wall paint, then pull the tape. Youll have to watch more of my videos to see. Here's a video on installs kzfaq.info/get/bejne/Z7-AdZlylda3f5s.html
@TheRealDill93 5 ай бұрын
@@FortressFineWoodworks thanks man. I appreciate it.
@TomsBackyardWorkshop 6 ай бұрын
The main drawback of a saw stop besides the price gouging is that it destroys the saw blade and the cartridge. I dont think its necessary to stop the blade like that given how fast it retracts the blade. It could use a non destructive brake to stop the blade if any brake is needed at all. Its fairly likely the brake is only there to be a consumable and force customers to buy replacements.
@FortressFineWoodworks 6 ай бұрын
I actually agree with that. But they actually give you a free brake if it detected skin. So I think they are trying their best
@TomsBackyardWorkshop 6 ай бұрын
@@FortressFineWoodworks I would like to see someone do the hotdog test without the break installed. They are probably going to have to trick it into thinking there is a break.
@FortressFineWoodworks 6 ай бұрын
Yah, it needs the brake for the system to be active
@mattelias721 6 ай бұрын
@@TomsBackyardWorkshop I'm not enough of an engineer to speak intelligently, but I'll say that my left pinky finger wishes I'd bought a Sawstop. Sometimes, if it's stupid but works, it's not stupid... old Army saying there.
@TomsBackyardWorkshop 6 ай бұрын
@mattelias721 I didn't say it was stupid. it's just way overpriced, and the braking system is unnecessary.
@mattelias721 6 ай бұрын
Dude. I know you've had a partially-sh***y 2023, so up front, I'm willing you an awesome 2024. This video had SO MUCH STUFF that I felt compelled to comment on, but after scribbling notes, I stopped. You don't need a comment section dissertation. I'll just launch two thoughts like a wood missile off the blade for you: 1 - Commented below re.: Sawstops; pay the money, keep your body parts... Cody technically can get new eyes, but they'll be glass and not useful for seeing hot chicks... or wood. 2 - Your commission allows pocket screw nirvana here, yes, but I'm completing my home office built-in stuff, and I'd say that if your shelf units are going to hold 1000 lb of books (no, not joking), then even 1/4" dadoes will save your butt... I wouldn't trust pin nails or even screws to withstand that kind of shearing force. Yes, the floor is sagging already. Awesome build. Please don't stop the content.
@FortressFineWoodworks 6 ай бұрын
Haha you've got me cracking up over here. Taking notes for a comment lol I know what you mean. Cody with two glass eyes.... haha he would be quite useless Those dados do a lot. I know. Infact, I've never seen something break out of a dado. Thanks for taking your funny as time to comment. Happy new year!
@mattelias721 6 ай бұрын
@@FortressFineWoodworks No problem! I love your style and all your content!
@FortressFineWoodworks 6 ай бұрын
Thanks man.
@gerekbasikal1 6 ай бұрын
Can you make spesific and detail video on How to paint / finishing.tqvm
@FortressFineWoodworks 6 ай бұрын
Ive made a few different videos that go more in depth. Heres a good one kzfaq.info/get/bejne/n8eDrcKK3JbDfo0.html
@gerekbasikal1 6 ай бұрын
@@FortressFineWoodworks ok, tqvm
@zephyr1408 6 ай бұрын
I am a cabinet maker finish carpenter & recently stopped painting my projects? Well I don’t hv a large shop and ppl were not willing to pay the price! Are you actually making your money back?
@FortressFineWoodworks 6 ай бұрын
Since I have the space and the equipment, yes its easier to paint my own projects. Especially because I can control the quality. So yes, it still makes money.
@AVSMedical1 6 ай бұрын
Beautiful work! I’d love to see a video of you drawing that in SketchUp, not a how to use SU, just watching your process. I struggle to draw flutes on pilasters and columns.
@FortressFineWoodworks 6 ай бұрын
I just drew the outside edge of each flute then push/pulled it in 1/4 inch. So by design, its not a real flute in the model, but good enough to look like one.
@terryhaley9680 6 ай бұрын
What is the whie board thing you are drawing on?
@FortressFineWoodworks 6 ай бұрын
It's just a mini white board from Walmart. Thanks for watching!
@terryhaley9680 6 ай бұрын
Why do you use that instead of paper? What is the advantage?
@jasonbissonnette2331 6 ай бұрын
I need one of those in my shop! Great idea!
@FortressFineWoodworks 6 ай бұрын
Because it's easy for the camera to see, it's hard to lose, and helps conserve paper
@FortressFineWoodworks 6 ай бұрын
Totally! They're like 8 bucks so why not
@mfcosi 6 ай бұрын
👏🏼👏🏼👏🏼👏🏼👏🏼
@FortressFineWoodworks 6 ай бұрын
Thank you!
@chefgoldielocs 6 ай бұрын
15:32 💀😱😅
@FortressFineWoodworks 6 ай бұрын
Haha thanks for watching!
@paulgreene9997 6 ай бұрын
Nice work
@FortressFineWoodworks 6 ай бұрын
Thank you! I appreciate you watching!
@kevinb6102 6 ай бұрын
You are so good
@FortressFineWoodworks 6 ай бұрын
Thanks Kevin! I appreciate you!
@ricouze69 5 ай бұрын
Minute 23'10": the piece of wood has been rejected because the parallel guide is not well positioned. It should not go after the saw blade.
@FortressFineWoodworks 5 ай бұрын
Very true. Things happen, thanks for watching!
@user-ip3yw8hc1k 6 ай бұрын
❤💥💥💥👍😎
@FortressFineWoodworks 6 ай бұрын
👌Thank you
@bigdirtystinky6783 5 ай бұрын
beautiful. nice voiceovers. what are you using when using a brush to clean the woodglue? is woodglue water resistant?
@FortressFineWoodworks 5 ай бұрын
Thank you. The brush is dipped in warm water to clean up the glue. This is titebond 2 so its water resistant when fully cured
@Dan-uh3ng 6 ай бұрын
Much better video when watched on mute. Nice work.
@FortressFineWoodworks 6 ай бұрын
I'm glad you can find a way to enjoy my content!
@yangangzhang886 5 ай бұрын
nice work watching from china。
@FortressFineWoodworks 5 ай бұрын
Thanks for watching all of the way from china!
Xuân Đông Vlog
Рет қаралды 26 МЛН
Braincatchers
Рет қаралды 8 МЛН