Since many had some more doubts regarding this clay, I have made another video answering various of the doubts in detail. So do check out by hitting this link kzfaq.info/get/bejne/jtlpiq1kt5enf5c.html And thanks a lot everyone for the response on this video✌😇

Thanks for this video bro I was really searching exactly this information only

I gues i didn't look up any video tutorial before I started with Mouldit. The problems that I faced were as below: 1. I mixed the epoxy and hardner very badly ( I took out full packet and mixed together). Since it was a lot, I guess the two colours gave a marbling effect which means they hadn't mixed together well..as I gather from your video. 2. I made sculptures and I use bowls to dry them when I work with air dry clay. I did the same and spoilt a ceramic bowl from my kitchen. 3. I definitely had wet the dough a lot so it hardened as per this video. 4. I hadn't washes my hands at every step so the remnants were on my hands even after wash. Also I use a marble piece for all my clay projects and it got spoilt quite a bit, alongwith my knife, etc. Good learning from this video though. Thanks.

Inlove ur art and colouring pattern thanks for the video

Very beautiful art work u have 👍 thank you for informative video

I needed a hardening clay for my Chemistry project. Thanks a lott buddy for the help.

Thanks for this wonderful vide really helpful sir

Loved the way you are using all your fingers for sculpting 👍

Thank you for the wonderfully explained video.

One of the best tutorial video! Thanks a lot!

A very helpful video!!! thank you so much

Thanks bro. These are the kind of videos we need.

Sir you have covered much more things about moldit clay, thankyou sir 😇

Thanks a lot for this video. I used to use water on other air drying clay, but since Mouldit comes with instructions to use powder, i used that but never got the finish i was after. Thanks again. Also the painting tip is awesome. I've experimented mixing in colour with the clay while soft. The colour stays true. But your method saves paint.

Beautiful and creative works very talented and thank you for this video…..very helpful

thank you for such an informative video

Awesome video. Love the simplicity and the tips!

Iam watching this in 2023 and thinking 🤔 that this is 3 yrs back 😅😅😅 corona

Thank you so much. That was very useful for beginners.. Can we use rangeela paint on this fevicryl mouldit clay? Please tell

Thank you so much dear sir.. For this vdo. It helps me a lot

Amazing work 👍

Very well explained 👍 thanks

Beautifully explained

Thnq so much i was looking fr such a video only

Very well explained...thanks for vedio.👍👍

Thanx a lot. I was looking out for such info and u have given it beautifully

My mouldit clay was dry as it was old one probably one year back, but when I opened it, it was bit hard, I used some water but it was very watery so I added few drops of water it became watery like, I den got idea to pour in cone and use it, what do you think, it was correct plz correct me

This was amazing, but i would like to know what kind of paint u r using

Can we preserve this before mixing for future use?if yes how?

This video is very useful 👍🙏

Thanks for the video... I'm a beginner and wasted by mixing entire pack which got hardened before i could finish my work

Very useful info ℹ️ thanks for sharing 👍

Very helpful thank you 😊

useful video. thanks for subtitles.

Nice video bud.m thanks for sharing

would I reuse mixture of mould it clay. after mixing them..

absolutely loved the video ! Cannot believe how did I find what I wanted to 😅

Will it give a resin effect without coloring it? I mean Can we mix colors in it And will it give effect like resin or polymer clay?

Thank you soo much!!!Just bought this set of clay and i wanted to know if the packets had to be sealed once opened cuz maybe it will harden but you saved me by saying that the resin and hardner doesn't harden unless mixed!!❤

How can we protect this clay from dust n all if we prepare the artwrk on canvas or directly on wall

Hi Shreyas!! Thank you so much for a very comprehensive video. I was able to handle it with ease after watching your video. I have a little question. This clay has a smell even after drying it for many days. Can you suggest a clay for creating small items that don't have any smell later.

Amazing, thanks

Nice video! Very helpful.

Khupach Chan . Waiting next videos

Ty soooo much

Fantastic...

This was amazing. but i would like to know if you could use sticky clay to paste a new part to already dried clay

How much time is needed to harden the clay?

Sir will it stick to hardened resin

Thanku so much ❤

Very helpful 😍😍

Thank you sir it is very helpful I needed this information because I need to make school project

Which product you use while stick the clay

Nice tutorial

It is the best clay , better than natural clay also,

Superb mimickry

thanks for the video, very helpful!! how do you seal the work tho? do you use any sort of varnish for that shiny finish?

Informative video👍👍

Very informative video👍

wow, this was very explanatory video. Can I use/stick this on plastic board, may be with the help of fevicol?

Very very informative. Thanks a lot. I have been looking for clay art. Also can you tell me, what varnish you use to coat the end product ?

Very helpful 👌

Nice tutorial 😊😊

Awesome Thanks

Since my clay is dried already and I want to paint it, is there any way I can make it properly sticky to prevent from any accidental damage to the artwork? Please answer.

It is reuseable?

It's super sticky, I prefer putting a good amount of oil or Vaseline on my hands before using it.

u r brilliiiiiaaaaanntt

Really nice...waiting for more vids...please make mini figures like that of pikachu etc etc

Awesome 😍😍😍

Waiting for this video since my birth 😅..and it's finally here, damn good man keep it up.. 🤘

Very informative video. If I wanted to attach two pieces of clay together, do u have to score and add water before attaching? I'm having more of a traditional clay background so not sure if rules apply here as well

That was such an informative video!! I wish I had seen it before I ended up with a big ball of dried up clay, in the process of trying to store it. Can dried up clay be covered with wet clay to create something? As in will that bond? Let me knw if you have any idea bout it. Thanks

Hi very informative video.. Thanks for it.. Just wanted to know if glue is required to stick mouldit on canvas board.. especially wen we work directly before it dries up..

Very helpful video! Thank you!! I wanted to ask one thing.. have u used different types of clay..if yes..can u make a video on them?

4:01 🤣🤣🤣 thankyou it helped me

Good video 👍

Very informative

You make amazing clay super heroes Shreyas !! 🤩🤩🤩 I wanted to know how to clean hands when the clay sticks?? It becomes so hard to remove..

Thank you so much for this video Please upload a video how to make groot Its my favourite character

Hi Shreyas, I am a beginner,loved your video, just wanna know, if we don't mix the hardener and resin after opening as you said,mix them in small amount, they won't be hard

Amazing creations. Would be great if the audio was proper as couldn't really make what you're saying anyways good work. I'm an artist, work with this clay often and tbh it's more efficient than the other costly options available in the market.

Wonderful tutorial! Thank you. I already subscribed. I just want to ask you that, if i.want to do an art work on the ply wood pieces or canvass board how to stick it ?

Thank u so much bro it is very useful

Waterproof after drying?

Wow!! Really amazing explanation! Just one question. If we don't mix hardener in the resin, will it dry. Or does the drying process of hardener only starts after mixing it with resin?

Wow lovely tutorial ❤️💝keep rocking 🌻🎉

Very informative video! Could you tell me which paint should we use? Acrylic or water colours?

I didnt find such detailed video regarding clay. Its awesom. Can you please suggest which glaze is available in india for glazing clay models?

Can I colour the clay before using it . Like ,can I mix both clays and add a bit of colour to them and then make things with it?

Thanks bro🤗

Thanks for the detailed video. It was informative. I wanted to ask you, whether we can do a epoxy resin flood coat over this clay sculpture to have a glossy finish?

Wonderful tutorial like to banta he 👍🏻 But there is 1 thing I want to ask that after mixing the 2 things do we have to quickly give it the shape we want to if we cause delay will it dry and we won't be able to give it desired shape?

Amazing

What kind of accessories u use for sculpting action figure

Underrated

Is this clay waterproof ?

can we make a small figure by sticking the clay by fevicol? also can we color the clay by acryllic paint when wet? Thank you for this information

Can this stick on Concrete

Thanks for the video. Is there another clay brand that is similar to the finish of this one?