That video of the CNC milling was just what I needed on a Monday morning. Lovely

*Bought as a gift for my son and his second grade son to use on a Pinewood Derby car. Wanted something relatively safe and able to be packed away when not in use. Worked well. **MyBest.Tools** Easy to use and set up. Case provides good storage.*

Great outcome once again mate!! Well done!!

I like the look and the functionality of the flip stop.

Howdy Ryan. Nice job on the fence and the flip stop. I too have slots in my drill press table and they are forever clogging with chips. I really like your modifications. Nice simple design. Great Job. Thanks for posting the build and Yes, I like the flip stop for the fence.

I can’t wait to try this at home. Just towards the begin you called it a bevel you cut on your table saw. It was actually a Chamfer.

Dont know how to use the flip stop but it looks great. Loving the direction of your channel. I tend to be favourable to products produced by KZfaqrs and Canadians when they meet my needs.

That surface finish is really cool.

Love the flip stop and the machine finished look

Great design. I'll be keeping this in mind for my own drill press. And the flip stop is also very nice, but I'll have to find another way to make one. Thanks for sharing!

I have been watching a lot of videoes on KZfaq about building a drill press table. What surprises me most is that almost all of them are built with keeping the fence square to the drill press table. This does add a lot of complexity in making the drill press table. I do not think that you need to do this. You only need to worry about the distance from the center of the drill bit to the edge of the fence. Take a look at my video "Build an easy drill press guide" and I would be interested in hearing your comments about my design. I have responded to a lot of other videos with this same idea and have not heard back from a single one yet. My design does not have a dust collection system.

We have the almost exact same design flip stop that comes with hobby style table saws but it's made from steel, they work great and as a plus you can use them with aluminium profiles such as 2020/6020 etc. Great fence, I think it's time for an upgrade

Love the cut pattern on the stop bracket

Great job...I think the flip stop is great...thin and not "taking away" space on fence

Great clamping design and I really like the flip stop

Maybe cut off that 90* corner where the stop nests into the fence and table? That way dust and chips don’t interfere with the accuracy. Can also add a chamfer to the bottom edge of the fence for the same purpose. Just an idea. I may have to use this fence clamp idea on my shop made fences for my router table. Chips always clog that track.

Really cool. Like the new flip stop

Very nice fence and flipstop design

I really like the way that your fence locks to the table. I bought a commercial fence/table for my drill press that uses the t - track method. Like you mentioned, the tracks keep getting clogged. It's also a nuisance taking the fence off and reinstalling it. Yours look much nicer.

Great design Ryan on the fence and the stop block!

I like the look of the flip stop. I made a fence similar for my bandsaw. No bevel but slides are on the sides.works great!

That flip stop looks awesome!!

I like the flip stop and the fence design! Great work as always.

Awesome design on both flip stop and fence

Pretty slick. On my drill press table, my fence is bolted on one corner so that the fence pivots in an arc, instead of sliding horizontally. Less fuss; same net effect.

User friendly design. Good job.

Makes me want to redo my drill press table fence. Mine annoys me so much I rarely use it. I would defiantly buy the flip stop. I like the finish a lot 👍

I'm definitely interested in one. I'm already on the wait list for the regular one so I say go ahead and make another list for this to add me to.

Clever and unique designs, thanks for sharing

I take it that you have some machining back ground. I am impressed with your machining knowledge. I like you drillpress table and I am going to build one for my benchtop drill press. Your youtube channel is very interesting and I'm getting a lot of good ideas. Thanks Gene C

Those flip stops are great, man. Nice video.

Love the flip stop idea. Liked and subbed. The fence could easily have been solved with an L-shaped backer with a large hole cut out in the center to accommodate the drill press post. But I assume your system works well enough. Thanks for sharing! 👍🏻

that flip stop looked super cool

Ryan very cool video and nice flip stop design.

Excellent!!!

I might have to use this design! Simplest one i've seen!

Great work. I’ll have to rethink my fence design now too!

Not sure the title is correct, "Simple Drill Press Table" I guess if everyone had their own CNC machine in their garage...ok. Enjoyed watching it though!

Came out so awesome and yes definitely interested!!!

Nice design! Thanks for sharing.

good design. both fence and flip stop. im gonna make a table saw fence and i might try this idea.

For router tables and drill presses - I like fences that pivot rather than slide. Much simpler - a screw on one end and just a hand clamp on the other. You can dial in very precise distances from the cutter by tapping the unfastened end.

This flip stop looks da bomb! Great job there :)

Nice design and i also liked the old one as well, perhaps if the t-tracks either side were only half the size, you might not have a problem with those chips, basically place the t-tracks level either side of the middle, where the chuck hits the table when pulled all the way down. (hope you understood that ha ha ha) When you are using the gluebot place the red cover on top of the big yellow lid, that has the yellow bit in it that's were it goes when not in use, which saves the rubber band swinging around. Barry (ENG)

Really nice work. I've struggled like you, and this is an excellent solution. Keep the good work thanks.

I don't follow directions well -- I hit the "thumbs up" button instead of the like button... ;) lol I like that flip stop!

I like this idea. I think I'll make something similar for my bandsaw that doesn't have a fence.

well, if i had a cnc machine, maybe. but since i don't have that, NO i do not like this . but, kudos to you for having all the machinery.

The stop looks great. I am in need of a drill press table and fence and would buy one.

I like that a lot and would be interested in purchasing both!

Great table by the way.

Smashed! Love the pattern.

Love it all. It's awesome.

Great design! I really like it.

Nice improvement, well done 👍

This is great. I like the improvements you made to the table and the flip stop is amazing. I love that you can make your own parts like that.

Nice work, really cool, the pattern is phenomenal!! Greetings from Austria

Nice built, quick and easy, CNC flip stop aside :-)

That is an awesome idea going to try that myself.

Diggin' that CNC man.

great design all around. thanks

Like the flippers!! Great vids, man!!

Very Nice idea👍

Nice job. I'm going to re do mine like this!!

The mill pattern left behind on the stop looks sweet! Should you decide to do a production run, count me in for one!

Awesome video. Love that flip stop. Greetings from Andreas on Off Grid Sweden

Really cool, nice upgrade! 👍👊

sweet design man

Nice improvements to the drill press table, I have similar to your original, might be time for an upgrade. :D

Great clamp and I am interested in have a couple of them.

Nice design... I'd pick one those flip stops from you...

Looks great

Cool solution.

I’ll be buying that flip stop if you make them

Flip stops? Yes Please!!!

yes

Thanks

Yeah buddy. I need this table and stop. So if you do decide to to a production run , let us know. Thanks

Yup I need one

Yep, I'm interested

I see you can see good trough the doors with the coolant on an idea take a motor from a hard drive and place it in a door replace the disks with a circle of your door materiaal the motors rpm is 5000 to 7200 so when the is spinning nothing will stick to it than you have a nice viewport like the big cnc machine's have greetings from Belgium carlo

Interesting and informative video.

Canadian I'm guessing. First video I've see of yours and I am on the 11 second mark. Am I right?

Hope you can sell a bunch of those flip stops...I bet you invested a fair amount of time in prototyping it.

Nice new fence. Very similar to a Shopsmith fence. Like the flip stop mechanism. However, (you asked) I’m curious why there is space between the stop and the fence when the stop is down? Seems to have more of a point than flat? It works well though and that’s what’s important!

Que mostro trabajo saludos desde peru😃

Don't forget to add a little chamfer on the bottom of your fence to prevent dust to be in the way of your workpiece.

Interested! Plans please! Best drill press set up I’ve seen, really wish this was already on mine. I’m upgrading my CNC right now and using the drill press to cut a ton of holes in aluminum plates and this would be huge for me right now! I have a bunch of 1.5x1.5 80/20 so I might try to use that for the fence part.

Nice work. Would be interested in seeing a video on that fixture you made for the CNC vise to help you cut out the flip stop.

Just a quick note, when you use the table saw to cut a bevel on a long piece, why not use a fence extender to support your work and stop it from wobbling. I made an auxiliary fence that fits over the table saw fence and locks using t bolts from the side.

Nice fence fix. I like the design. I can't help but think that the stop is much too expensive and could be made less costly as a stamped metal part or even as a flame cut part. Yours is pretty and expensive; I'd prefer functional and less expensive.

I believe you i swear.

Love it!

You have a CNC machine yet make wooden fence system whaaaaaat? Imagine the possibilities!

Ryan, Like a router the drill press fence is only there to set the distance to the bit . Unlike the table saw where the fence must be parallel to the blade. On my router table I have a couple of pivot point holes drilled and the fence is clamped to the table once the angle (and hence distance) is set. I must admit I hadn't thought about it for the drill press but may now give it a go. Like you I have both metal and wood machines but only a manual mill and so the green monster surfaces. Have you considered making a metal version of your kerf maker on the new toy? Regards

Great idea and design. I need this table and fence for my drill press. Do you have any plans?

awesome!!

Like the flip stop, do you need a chamfer where it his the table so it’ll move when there’s a mess on the table? Cool though

You have nice gear, milling machines and such.. One day perhaps. Nice video and editing. I shall sub, cheers

Great job and LOVE the flip stop! I guess I'll have to add a CNC to my wish list. BTW - What are your thoughts on just putting the T-Tracks on the sides of the table? I'm thinking that could be a good solution as well. ヅ