A detailed look at diverter valves in a boiler

A detailed look at diverter valves in a boiler - Part 2

Рет қаралды 53,218

Baxi - sustainable heating and hot water solutions

Күн бұрын

In this video Baxi trainer Richard looks at 'testing' a boiler diverter valve, this is part 2 of his detailed look at how a diverter valve works in a boiler.
Please note: This video is intended for Gas Safe registered engineers only and is subject to our full video disclaimer which can be found here: www.baxi.co.uk/video-disclaimer
For more information on Baxi Training: www.baxitraining.co.uk
For product information: www.baxi.co.uk

Пікірлер: 21

@paulanderson7338 2 ай бұрын

There's a theory that the seals in the divertor valve are being compromised by inhibitor in the heating circuit. 4 year old Baxi 830, onto its third cartridge, leaking up through the plunger pin, same issue every time.

@sajidlunat 3 жыл бұрын

Thank you. Keep them posted

@quadrantheatingelectricspl2907 3 жыл бұрын

Thank you baxi for such a good video

@mickyyyy5236 3 жыл бұрын

Really good video fella cheers

@abualam4418 2 жыл бұрын

Great video

@anthonybennett6008 2 жыл бұрын

Great video 👍👍👍👍

@HashiriyaSquadron 8 ай бұрын

Thank you. Just tested mine. It was rusted so I'll replace the head and cartridge. 👍

@pointyplumber 4 жыл бұрын

Great video easy to understand realy useful for those that dont know

@Hitngan 3 жыл бұрын

excellent

@user-vg4ve9gl5j 3 жыл бұрын

Thank you.

@davidmarsden8868 4 жыл бұрын

Nice one... see you on the 20th

@Foghat1961 3 жыл бұрын

Excellent video! Now where did I put my multimeter?

@TheDogs1964 Жыл бұрын

I've an issues with my valve but it's nothing like that one. Potterton gold 24he GC 47 590 05. Took my cartridge top off and all it is is a rod and spring with a piston. Nothing like that cartridge I bought to replace it. Any ideas?

@terryquinlan5901 Жыл бұрын

What causes by passing on fully working titanium 40.

@bensmith1273 Жыл бұрын

hi thanks on mlne tbe bottompart is stu k i side how can i tqke it out please

@eddiereed5025 2 жыл бұрын

Just a comment terminal1 on actuator is heating demand terminal 3 dhw demand

@SuperJinxter 2 жыл бұрын

Whomever designed the plastic valves in the Duo-Tecs, needs his/her pay docked. They always snap internally and you need to take the manifold out to get the bottom bit out.

@julesviolin Жыл бұрын

Guessing you didn't loosen the bottom union of the valve 1st ?!!! This releases the hydrolock caused when withdrawing the cartridge. Nowt wrong with the plastic ones when proper procedure used !!