A First Look At The BRAND NEW MJJC FOAM CANNON PRO V3

Рет қаралды 32,670

IMJOSHV - Car Detailing and Reconditioning Tips

Күн бұрын

Ive been getting tons of question about the New MJJC Foam Cannon Pro V3. So i decided to make a video talking about everything i know about the new foam cannon from MJJC. I discuss everything from the new features this pro v3 will have, to release dates, and pricing. As all of you know, I love the MJJC foam cannons and I am very excited to get my hands on this new to give it a full test... ENJOY!
See the items I use and join the mailing list at: www.DTLRsupply.com
LINKS TO PRODUCTS IN THIS VIDEO:
MJJC Foam Cannon Pro v2
On My Site - dtlrsupply.com/products/mjjc-...
On Amazon - amzn.to/3GJP7wS
New MJJC Foam Cannon S v3.0 -
dtlrsupply.com/products/mjjc-...
Best Budget Pressure Washer for Car Detailing:
Active 2.0 :
Full Kit - shop.activeproducts.com/produ...
Pressure Washer Only - shop.activeproducts.com/produ...
Active ve52 - amzn.to/3XomImw
TIME CODES:
0:00 - NEW MJJC FOAM CANNON PRO V3
0:30 - MJJC PRO v2 FEATURES
1:28 - MJJC Sv3 FEATURES
4:04 - NEW FEATURES OF THE MJJC PRO v3
11:07 - PRICING
13:48 - WHEN WILL IT BE AVAILABLE?
#mjjc #foamcannon #cardetailing
**These are affiliate links to the products. We make a small commission on anything purchased from our links.
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use of the information I share in my videos. (IMJOSHV) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not (IMJOSHV) or any business affiliated to (IMJOSHV).

Пікірлер: 169

@adamrusch7112 2 ай бұрын

Has there been any update on the release of the new ProV3?

@johnlambert5219 10 ай бұрын

I got mine a week ago off of your recommendation and you were spot on works amazing. Some of the best foam I’ve ever seen

@CurlyWoof 10 ай бұрын

Thanks for this video. You took a lot of time getting the information and also editing it to make a cohesive, understandable presentation. It clearly took a lot of work. Thanks again.

@M_IkeLeBlanc 8 ай бұрын

Best detailing channel on KZfaq! So many helpful tips and reviews. I’ve learned more in the past six months than the prior 20 years. Thank you!

@imjoshv 8 ай бұрын

Wow, thanks!

@BXGreen 10 ай бұрын

Thanks for breakdown. Looking forward to seeing the test.

@siclanevo 10 ай бұрын

I picked up the pro V2 from you earlier this year and I love it. I'm not ready to jump ship to the V3 once released, but all stainless components and the spare parts is a great upgrade.

@davestewart9146 10 ай бұрын

I have the V2 and have never been disappointed, myself I see no reason to upgrade, thanks Josh 👍😁

@pasqualepisani 10 ай бұрын

Good review. I’m happy with my V2 and if it breaks, I’ll spring for the latest version of the Pro V3 but I’ll wait to see an additional video of the Pro V3 in action

@Wiikendzgoodmix 2 ай бұрын

So any news on when it will be released? 8 months ago and im debating wether to buy the s 3.0 or wait for pro 3.0

@junyer55 10 ай бұрын

Looking fwd to this,again awesome info.👆

@ddautodetailing 10 ай бұрын

I hope the new version is all the items you mentioned!

@coreymerritt7742 10 ай бұрын

Very nice foam cannon I just bought the version 2 based on your recommendation thanks josh

@imjoshv 10 ай бұрын

Awesome!

@inkgenie9760 10 ай бұрын

Can’t wait!

@IntervalePC 10 ай бұрын

HD = “heavy duty”🤷‍♂ Thanks for the update video🤟

@ruttl1 10 ай бұрын

Great video and thank you for the information. I

@imjoshv 10 ай бұрын

You bet!

@captainbeardvisuals4696 4 ай бұрын

Any new updates on the pro V3 coming out?

@fredfredburger5583 10 ай бұрын

I was about to buy the sv3 but now I'm going to wait for the new pro v3. I'll buy it from your shop👊

@Messi10billy 6 ай бұрын

What is the difference?

@mnmn1665 10 ай бұрын

Excellent review. Will these fit the Griot's BOSS Cannon bottle? Thanks.

@THATLTRFOUR50 10 ай бұрын

Just got my mjjc v2 from your site and arrived thanks for fast shipping can’t wait to try I do use the Mckillans and a 20-30 dollar one from Amazon believe it’s the lance which works awesome truly got it because of all the hype and wanted to test first hand if it’s a big big difference but also do like quality,so for myself I take pride in all my tools and equipment

@imjoshv 10 ай бұрын

Awesome enjoy it!!

@traviswebster8302 2 ай бұрын

what are your thoughts

@richm7410 10 ай бұрын

HD might mean “heavy duty” . Another great video comparison. Thanks!

@imjoshv 10 ай бұрын

Ahhh I think you’re right! Haha thanks

@DR-rx4lk 9 ай бұрын

Think about it @imjoshv. The griot boss has the smaller threads for direct bottle metering soap. Could the 3.0 pro have a metering option?

@DR-rx4lk 9 ай бұрын

@imjoshv have you put the metering tips from griot on a jmmv Pro to see if it works. Really want a self metering foamer that allows change from vertical to horizontal foam spray

@aliamini526 Ай бұрын

Regarding the Canon Pro foam, does it work well with the 180 bar pressure device with its existing nozzles, or do I have to buy the 1.35 nozzle separately?

@user-yb2tp4qf1r 10 ай бұрын

The 28mm is indeed for regular bottle, here it will be used to attache the soap bottle directly to the foam head, I guess it should be used with auto-mix tips like griots garage boos foam canon. By the way, I still have the old mjjc foam canon S, works just as new.

@cpusalesservices6935 10 ай бұрын

I can concur with this statement while adding an additional point. The 28mm is also used for RTU (Ready To Use) products such as Poly Gloss and others which do not require dilution. It's a great feature, however I wish it has actual threads like the THE BOSS Foam Cannon instead of a knotch which would prevent the bottle from falling out. This would greatly increase your range of motion while manipulating the pressure washer nozzle without having to hold the bottle in place in fear that it might fall out and spill our precious product.

@07THE19 10 ай бұрын

The only one I can find for the version to his from Swift auto care is this the same one just re-Branded?

@ncpyro2464 10 ай бұрын

Josh you should do some temu detailing item reviews

@peterpanoutsos1849 3 ай бұрын

Any chance of seeing this mythical pro v3 cannon anytime soon?

@jacobcarrillo906 10 ай бұрын

Review the Aero Cosmetics line of chemicals please!

@williampinchbeck4321 10 ай бұрын

Great video as always!! I was wondering is it possible to get any extra bottles for these foam cannons? Thanks again!! Hope the storm doesn't cause you and your family any problems!! Be safe!!

@CAPTJ696 10 ай бұрын

Temu but will take about 30 days. I grabbed two and both are exactly MJJC bottoms. For V2

@WVU304 10 ай бұрын

It only took mine 9 days. Guess I got lucky

@skillzo19 10 ай бұрын

Mjjc has their own red insert tips on their website. Is this the same as the griots auto metering tips that get installed in the bottles straw? Will they work with the v3? Currently in run griits metering tips in my v3.

@user-hn6of8sp1y 10 ай бұрын

Hey Josh Essential Washer has a foam cannon can you do a review Thanks

@newshadespressurewashingse1579 10 ай бұрын

Would be great if it came with vitron orings

@gerald6010 3 ай бұрын

Quick question? I have the MJJC PRO V 2. I prefoamed and I used all the solution. I rinsed. I foamed for wash and used all the solution. Is that normal?

@eddiehall5644 10 ай бұрын

Well looks like after watching hours and hours of your videos I have come to the conclusion to buy the active 2.0 with your recommended upgrades believe with the three vehicles I have to take care of should last for a while thanks for all you do to help out us weekend warriors keep up the good work

@RictorIAG 10 ай бұрын

It's an overpay but you do you dawg. An 1800 psi Ryobi is sufficient. Upgrade the hose and gun, per Josh's recommendations. Then use it only to rinse the vehicle and for the tires. Go with a rinseless wash (I recommend Wolfgang Concours but ONR or McKee's is fine too) that has Si02 in it and you're golden.

@richurro20 10 ай бұрын

Its a beast. I bought one after returning my $800 dollar Adams Pro Pressure Washer cause the stupid thing kept leaking and coming off the hose. On this one all the connections are tight and secure, the machine is super light and ez to pick up and move, has a long power chord for range, over a 150 more guaranteed hours than the other cheaper pressure washers, and a really good warranty policy. If anything happens Active will send you another one for free. Just make sure you don't use a 1.1mm orifice on your foam cannon as that will mess up the motor and cause damage.

@imjoshv 10 ай бұрын

The active 2.0 is amazing. The gpm really makes a difference and makes the final rinse much faster than a unit with lower gpm. Great choice!

@1stfrompuertorico568 10 ай бұрын

Nice!!!

@imjoshv 10 ай бұрын

Thanks!

@santiagorojas9128 27 күн бұрын

Is it out already for sale

@tracyhowe2484 9 ай бұрын

Are you going to get more unbranded foam cannons on your site? Hoping to grab my husband one.

@philipheilman5413 10 ай бұрын

where are they manufactured? where is the factory you spoke with?

@MRUISBIG 10 ай бұрын

Hopefully the MJJC VER 2 will do a price drop

@ashrum3604 10 ай бұрын

Is their any easy apply wax/protectant that can be applied with a foam can that you would recommend?

@ashrum3604 10 ай бұрын

Have you tried Koch-Chemie (PW protector wax) I stumbled on to it after looking into Koch-Chemie after seeing you mention some of their products in your videos. Seems like a spray on with a foam cannon let sit for bit and rinse off wax protectant. See like the easy apply wax/protectant I might be looking for.

@flytyingguy1 10 ай бұрын

It’s getting out of hand now! Every month there’s a newer & greater product. Totally ridiculous!

@imjoshv 10 ай бұрын

Or atleast there claimed to be

@zzhughesd 10 ай бұрын

Agreed. Bat S Crazy world. A decent cannon is a , decent cannon.

@WillieBHardagan 10 ай бұрын

Don't need to buy something just cause they updated it. As long as what you have works don't worry about it. I was using the cheap $9 foam cannon from Amazon that I got like 4 years ago until this summer. And even then I didn't need to get a new one.

@Voodoo_HG 10 ай бұрын

@@WillieBHardaganExactly🙏🙏

@Voodoo_HG 10 ай бұрын

@@imjoshvIm planning on getting the joejet Short pressure washer gun,But do you know whats the oriface on the nozzle tips that come with the gun???

@Jaycapo1990 10 ай бұрын

can I pre order the pro mjjc pro v3

@DerekGH 10 ай бұрын

What is actually inside the top part that makes the foam? And is this the only part that makes a difference? Bottles are basically the same, connections are the same, knob to adjust the water volume is the same, adjustable spray tip is the same. Am I missing something about what makes them different?

@cgraham6 10 ай бұрын

I can't imagine making more foam than the V2. I use the Pro V2, and with only 2 oz of foam concentrate (Adam's Mega Foam), it's almost TOO much. I've considered cutting back to 1.5 oz.

@jseels 4 ай бұрын

What pressure washer do you have? Usually the more GPM you have the more foam it will make

@cgraham6 4 ай бұрын

@@jseelsThe Active VE52

@wesleygreene6075 10 ай бұрын

Literally just bought the v2

@imjoshv 10 ай бұрын

This one won’t be available till November/December and I’ll be doing full tests to see the differences

@wesleygreene6075 10 ай бұрын

@imjoshv yeah i watched it just threw me off at first cuz I saw that you posted 30 min new mmjc v3 😂

@Chris-Viper 4 ай бұрын

Waiting for the Pro V3 that stainless steel will look soo swish!

@RichardsWorld 25 күн бұрын

And can't see how much liquid you have left??? No thanks.

@TheJonathchunghk 9 ай бұрын

Hi JOSH, I have built/modified a foam cannon myself! it can produce thick foam on a 350psi 1gpm cordless battery washer，at the same time it using less shampoo. Do u mind have a test on it ?

@Jaycapo1990 8 ай бұрын

Can I buy the foam cannon you modify

@depaturearrival6678 10 ай бұрын

Hey Josh, I've been running Car Wash Fundraisers for my unit and I been working on setting up a system that works well but isn't to complicated so it works when I'm gone. I've been using your videos alot while in doing my homework and I was wondering if you could help me create this system and get the best bang for our buck?

@MK-qb2so 10 ай бұрын

I'll keep my v2

@imjoshv 10 ай бұрын

Yea I don’t think it’s worth replacing but for people buying a new one this might be a good option… we will see once I can get my hands on it

@Aestheticsauto 10 ай бұрын

Let’s see

@gabriell4031 10 ай бұрын

I just got the s3 now to return it and wait😂 did they say the lead time?

@imjoshv 10 ай бұрын

Yea they won’t be available till November/december

@dtna 10 ай бұрын

Why would MJJC make a narrow base and a taller bottle? The wider base and the shorter bottle was their best selling point! 😮

@imjoshv 10 ай бұрын

Yea I think the pro v3 will have that really wide base shape. For the s v3 when comparing it to the s v2 they did make it wider. I think they keep the widest base for their pro line.

@hotskull4116 10 ай бұрын

Hey Josh is that a replacement bottle for the s model

@imjoshv 10 ай бұрын

Like for the s v2? Or is the new pro v3 bottle going to work with the s v3? I’m not sure cause i don’t have the exact size of the new bottle yet, but if it the same 1/4 turn connection that bottle may work with s v3

@jimphares 10 ай бұрын

when you are done using, do you Flush the foam cannon or can you leave fluid in it?

@GiovanniGiorgo 10 ай бұрын

Flush out the system so the filter and tube don’t get gunked up

@jimphares 10 ай бұрын

@@GiovanniGiorgo TY

@JP_JP9 10 ай бұрын

Random question, I have an MTM foam canon with an active pressure washer setup, I recently switched to a 1.1 orifice but my foam still sucks. Any advice?

@imjoshv 10 ай бұрын

With that set up you should be getting great foam. What soap are you using? Maybe try adams mega foam

@JP_JP9 10 ай бұрын

@@imjoshv chemical guys mr pink. But honestly I’ve felt like it doesn’t mix well in the foam canon. Ill squeeze a drop or two in there and it almost just floats around for awhile before it actually starts to turn to soapy water. Thoughts?

@renogunzddragon1900 4 ай бұрын

@@JP_JP9just a drop or two ??? Put 30-60ml in there then see the difference

@APaulO96 10 ай бұрын

I don’t even have a foam cannon yet, I was going to buy one and now this… so should I wait? I don’t feel like buying a foam cannon twice. Just want one of or the best, buy it once and it last for years.

@renogunzddragon1900 4 ай бұрын

Pro V2 is already a great buy.

@DerPic 10 ай бұрын

I only want the V3 S because of the color combo lol

@imjoshv 10 ай бұрын

Ha I know it looks really good!

@joseywheels 10 ай бұрын

What Apple Watch band is that?

@jseels 4 ай бұрын

When is this PRO V3 coming out!? It’s been over 6 months!

@imjoshv 4 ай бұрын

I know it’s killing me. They said they are shooting for june

@jholland9952 3 ай бұрын

It has been a long wait. Originally they said December 2023 because they had a busy year, then early spring 2024 because a part didn’t pass quality control and now June.

@anthonycvella 7 ай бұрын

Any new updates on availability and if it'll be released before EOY?

@imjoshv 7 ай бұрын

Doesn’t sound like it. I’ve been in contact with the factory and they still haven’t released it yet unfortunately. Once they do it’s about another month before any stock is in the us

@anthonycvella 7 ай бұрын

@@imjoshv Thanks for the update! Does it sound like a ~January launch or later?

@jholland9952 5 ай бұрын

Looks like later than January 😢

@devonriddle007 10 ай бұрын

Are you going to do an Active 2.0 pressure washer give away soon?

@imjoshv 10 ай бұрын

I have in the past. I’ll look into doing another one

@Mike-hb4pc 10 ай бұрын

Great video as always. However, I will stick with my ProV2. I much prefer the wider bottom for stability for one thing. The stainless is a nice feature, but with that said I've NEVER had any problems with the brass, so why change a good thing? And the fact that you brought up.... the quick remove bottle. IF, for some reason you wanted to put a different bottle on the ProV2, you could do it easily. Not so with that quick change top/bottle design. And lastly, it costs more. That's my take on it, and just my $0.02 worth.

@pkt1213 10 ай бұрын

The bottle was the #1 reason I went with Pro v2 over S v3. Well really only reason.

@CaliforniaCasey 10 ай бұрын

Duuuuuuuude!

@imjoshv 10 ай бұрын

Coming soon

@garylanum6098 3 ай бұрын

I watched a video by Supercharged Llama Detailing the title of his video was DO NOT BUY THE MJJC V3.0S. I don’t know if you’ve viewed it but what he referenced when using the MJJC it left dry streaks and I wonder your thoughts of this.

@imjoshv 3 ай бұрын

Hmm. I haven’t seen that, but I’ve been using these for a long time now and never had any issues. If it’s leaving streaks that sounds like an issue with the soap. Since it produces so much foam maybe they were using too much soap which left residue??

@walex19 8 ай бұрын

Wonder when this is coming out. Been holding off.

@imjoshv 8 ай бұрын

Still not for a while. It was supposed to be November but some part of it didn’t pass their quality control so they are delaying it to make sure everything is right

@walex19 8 ай бұрын

@@imjoshv damn. I’ll go ahead and order the v2. Thanks

@peterdoherty7282 10 ай бұрын

How do I get entered for the pressure washer draw?

@imjoshv 10 ай бұрын

Just go comment on that video!

@archiepezek 10 ай бұрын

Go to the video where he reviews that pressure washer and Josh tells you in the video. I think you had to comment on the video--I don't remember exactly what it was.

@imjoshv 10 ай бұрын

Here’s the link to it kzfaq.info/get/bejne/rJyafcaB0s3Rqok.htmlsi=kAaa551vmEXpZAW1

@peterdoherty7282 10 ай бұрын

@@archiepezek Thanks!

@Superfastjellyfish669 10 ай бұрын

This guys is the handsome version of James from doughnut media

@dinokarakostas6407 10 ай бұрын

When is MTM gonna upgrade

@imjoshv 10 ай бұрын

Good question.. The head unit on that is great so the main upgrade would probably just to widen the mouth opening of the bottle

@aarongonzalez2156 10 ай бұрын

MTM needs to get rid of that small neckhole asap. Someone needs to 3d a big neck adapter

@BloggingITGuy 10 ай бұрын

1.35mm orifice is also needed for high PSI/GPM electric pressure washers that you can get now. Like the Greenworks 3000 PSI electric washer that I got from Costco.

@Tallnerdyguy 10 ай бұрын

Only if you get 2+ gpm. Otherwise a smaller nozzle is more beneficial for more, thicker foam. A smaller orifice changes the high psi/low gpm to less psi/more gpm

@BloggingITGuy 10 ай бұрын

@@Tallnerdyguy This pressure washer definitely does more than 2+ gpm. IMJOSHV did tests of similar models showing this. Plus I have tested my unit with 1.1, 1.25, and 1.35 orifices in MJJC Pro 2.0 cannon and 1.35 definitely produces better quality foam, with 1.1 producing very low quality runny/watery foam.

@imdeplorable2241 10 ай бұрын

Nah. I'll just stick with the PRO V2 that I bought from you last year. To improve it (V4?)? 1. Stainless internals and, 2. Quarter-turn on the large-based V2 bottle. I honestly do not know of any other improvements that could be made. Only a professional, everyday user would know --- like Josh.👍

@Ymh69969 10 ай бұрын

I have both of these models the v2 leaks like crazy though after I stop using it, it holds so much water in the head and the new design is heavy top and it always tilts over 🙄

@atrain132 10 ай бұрын

Do you have a crack in it or something? Where is it leaking from?

@wick6315 10 ай бұрын

Right though the front nozzle I'm sure.

@atrain132 10 ай бұрын

@@wick6315 is the nozzle spraying vertically and screwed in all the way, or do you have the water flow open too much?

@wick6315 10 ай бұрын

@atrain132 I generally have mine so I get the most out of the cannon.(cut the water from the pressure washer to the least) and I've noticed if I unscrew the top of the cannon from the bottle I don't seem to get the leakage (which I'm glad because where I store it it had made a mess by leaking.)

@atrain132 10 ай бұрын

@@wick6315 hmm, yeah I don't know man that's weird. I don't know if it's too late to try to return it?

@hartlanddetailer5670 10 ай бұрын

Country of Origin? Where are MJJC units made?

@stlwrx 10 ай бұрын

China most likely...

@zzhughesd 10 ай бұрын

Surely it’s just the same. Have V2. And a cheap ass one. I don’t know. I spray and go in whatever I am near

@2down4up 10 ай бұрын

Seems to me that MJJC is trying really hard to justify I third option because, you know, reasons.

@walex19 21 күн бұрын

Still nothing lol

@stlwrx 10 ай бұрын

Why didn't you demonstrate it?

@valledecauca1087 10 ай бұрын

Lol really

@Tallnerdyguy 10 ай бұрын

Its only biased because you use them. You aren't selling products you don't actuality use.

@drummerstar1190 10 ай бұрын

Their all the same really just deisgn

@OnlySlimzy 9 ай бұрын

U got a lot of good products but your audio quality ,no good

@imjoshv 9 ай бұрын

Yea lots a peaking in the audio on that video. I have it fixed now!

@xalint1 10 ай бұрын

Why is the damn thing so over price what does it cost to make 2 to 3 dollars. Even if it cost a little more then that to make they are way way over priced.

@imjoshv 10 ай бұрын

For the factory yea I bet you’re right… probably more than a few dollars, but I guess you have to factor in the equipment and other operating costs in to that. But that the same with sunglasses too I bet. Most probably cost very little to make and the retail for hundreds depending on the brand

@Tallnerdyguy 10 ай бұрын

Tooling for high volume CNC machining can cost easily over a million dollars. The raw components are likely around $8. You aren't paying for 6oz of steel, 1 oz rubber and 6 oz plastics.

@Tallnerdyguy 10 ай бұрын

@imjoshv sunglasses are overpriced along with regular glasses are massively overpriced because one company owns 95% of all glasses.

@w1nnin 10 ай бұрын

V2 is more then enough v3 it just too tall. I’m staying with my v2

@KiranPatel-fk1pg 10 ай бұрын

The V3 in this video is an S, not a pro. S intentionally has the long bottle as it's a tier below

@brokentradgedy 10 ай бұрын

I've always hated how ugly and bloated the MJJC Pro V2 looked....that hideous wide ass bottle with that ugly shape was a deal breaker for me...if im spending $80+ dollars on a foam cannon i expect it to look sleek and sexy. They finally listened and created the mich better looking V3...man that thing is awesome looking its almost perfect. But wow the V3 prototype or pre production one looks so good too.

@renogunzddragon1900 4 ай бұрын

Lmao stability on pro v2 is better,people always choose aesthetic over function until they actually used the product

@brokentradgedy 4 ай бұрын

@@renogunzddragon1900 except that the v3 has both...that bottle design on the v2 is flat out ugly and way too wide. You can't even grip it easily like the v3.

@RictorIAG 10 ай бұрын

For what it's worth, foam isn't lubrication. It's meant for fabrics, not paint surfaces. This is outdated technology. It's time to evolve and move on to things like a rinseless wash or if you're in Australia, Paint Pampering Shampoo. Foam cannons are great for drawing eyes to your work but if you're trying to minimize swirls and scratches in the paint, this ain't it. While I'm here, grit guards are useless. Their original purpose was to keep olives under water. They do absolutely nothing to keep grit out of the water column. This also makes 2-bucket washes a no-go for serious detailers. Josh is a good dude but he's faced with the problem of making videos constantly. This leads him to recommend a bunch of stuff because, hey, some of you might need it. But he's not giving you an education on the best way to clean a car. If he were, he wouldn't be promoting a foam cannon. That's like promoting the original iPhone in 2023. We've evolved technologically since then.

@imjoshv 10 ай бұрын

Respectfully I disagree, I use a foam cannon everyday in my business and don’t just make videos on techniques I don’t use. For pre washes im not using it for lubrication but for applying a product that helps to start the process of breaking down the surface dirt and contamination. Then for the contact wash I will foam with high lubricating soap and then do a normal contact wash. As far as grit guards go, not all of them are created equal and some don’t do much but for example the dirt lock for detail guardz absolutely reduces the amount of contamination in a bucket. I also use multiple towels instead so that the dirt never gets reintroduced to the bucket. Rinseless washes are great but if I have the option I personally always go with the other method. Foam isn’t specifically lubrication, the soap is, and the foam is a great way to distribute it. I still add soap to the wash bucket as well so the additional lubrication from the foam application is just a bonus.

@renogunzddragon1900 4 ай бұрын

For Rictor,try a rinseless wash on a really dirty car if you are so evolved in your car washing ways 😂

@WASHINGTONSTATEDOGTRAINER 10 ай бұрын

great video. .......

@imjoshv 10 ай бұрын

Glad you enjoyed it!!

@WASHINGTONSTATEDOGTRAINER 10 ай бұрын

hey , someone messaged me that i won the cat pressure washer, i gave my info , than they wanted me to pay the shipping but i said good bye to them . they said that it was josh ???@@imjoshv