A look inside the Gemtech GVAC Upper

Рет қаралды 43,455

3 ай бұрын

The Gemtech GVAC upper is designed to make suppressed shooting more comfortable thanks to a bore evacuator built into the gas block. In this video we're taking a look at it to see how proprietary it is, and how it compares to traditional methods of tuning a rifle for use with a suppressor.
Support this channel on SubscribeStar:
www.subscribestar.com/hoplopf...

Пікірлер: 242

@toddinfl 3 ай бұрын

Calm down everyone, this video was made before Socko was even born

@hehitmewiththatalphabetsou3337 3 ай бұрын

Chew you satisfaction a singlelicious satisfact to snack that up?

@redbasher636 3 ай бұрын

Socko...?

@toddinfl 3 ай бұрын

@@redbasher636 Hops timeshare 😺🐈

@redbasher636 3 ай бұрын

@@toddinfl I'm so confused lol

@australovenatortomino_1741 3 ай бұрын

@@redbasher636 Brock and Hop usually put pet segments at the end of their videos, but in this one the cat footage is missing.

@e7tegt503 3 ай бұрын

Nice to see Hop using some of his favorites things like the mro and prs lite stock.

@franktalarico689 3 ай бұрын

I was just thinking that lmao

@johnb.6468 3 ай бұрын

I’m a fan of my Midwest furniture. It immediately feels well machined and rigid as soon as it hits your hand.

@christopherrobin8134 3 ай бұрын

How well does it lock up? Do you find it loosening over time?

@pranavkamath4329 3 ай бұрын

@@christopherrobin8134the combat rail has held up great on my main rifle. The anti rotation tabs don’t fit tight against my mil spec upper, but the actual handguard has never rotated even after being dropped a few times and banged around. Barrel nut and screws torqued to recommended spec, handguard screws secured with loctite.

@Heywoodthepeckerwood 3 ай бұрын

@@christopherrobin8134Midwest industries make some of the best. They’ve been around in the AR game for a long time.

@ALovelyBunchOfDragonballz 3 ай бұрын

I dont use it anymore but I really liked the Nightfighter series.

@tfwwhennofitlitgf3300 2 ай бұрын

They're fine, but used Centurion handguards are about the same price on GAFs.

@matthewconnor5483 3 ай бұрын

The idea of a bore evacuator seems like one of the obvious things even for a standard rifle. Hopefully more companies play around with the idea.

@natsuccubus 9 ай бұрын

Pre watch comment: if i don’t see socko we riot

@natsuccubus 9 ай бұрын

rioting

@Hoplopfheil 9 ай бұрын

soz

@armorers_wrench 3 ай бұрын

Who is socko?

@hehitmewiththatalphabetsou3337 3 ай бұрын

Cheers nat ill riot to that

@coyoteodie4458 3 ай бұрын

@@armorers_wrenchduuude! Do you even Hop??

@Cashforfeet 3 ай бұрын

This has affected the spec ops community for awhile now, horrendous rates of asthma, chronic bronchitis and other lung issues because of eating all the gas and the fact they shoot a ton and train a lot in enclosed buildings

@borkwoof696 3 ай бұрын

Unironically sounds a lot like respirators might be a good idea

@Cashforfeet 3 ай бұрын

@@borkwoof696 yeah, but it’s what got big army into digging in on researching and fielding suppressors to now it’s even part of weapons development and contracts, army does everything ass backwards and it takes a lot of people getting sick, killed or loss of expensive equipment to get big army to change its ways

@user-tv4lz5ie5u 3 ай бұрын

@@borkwoof696 I was thinking the same

@Snougaloogie 3 ай бұрын

This is why theyre moving towards piston rifles and flow through cans, cheaper to buy that than pay VA claims

@Cashforfeet 3 ай бұрын

@@Snougaloogie yep, I think the Va system is the second or third thing that takes up a majority of the government budget, I think

@charlotteblackman429 3 ай бұрын

As a former Main Gun Loader on an M-60A1 Tank. That bore evacuator covered about 90-95% of the gases. It also required regular maintenance. But, extremely reliable at not only evacuating gases. But, also in utilizing the gases to assist the round out of the rifled gun tube. I wonder if anyone has tried to develop a miniaturized version of the bore evacuator. Which is different in design than a gas block.

@19DESERTFOX91 3 ай бұрын

I was about the comment the same but thinking about it and our stupid gun laws it probly just doesn't make sense. full on tank style one I'm assuming it would be to effective for what little gas AR has and be borderline if not considered an NFA item "silencer" I'm no engineer but in my head it seems like it would be a very expensive solution to a small problem that already has cheap solutions, NFA item or not.

@charlotteblackman429 3 ай бұрын

@@19DESERTFOX91 The only question would be: How would a suppressor be affected by a miniaturized bore evacuator. The barrel of the rifle would require proper ventilation. And, the owner would need to do occasional PMCS on the unit. In theory it seems like a good idea and an advancement.

@Foxtrott_4 3 ай бұрын

The new PWS rifle does have one

@charlotteblackman429 3 ай бұрын

@@Foxtrott_4 Thank you. I just my research on the PWS UXR rifle in .308. I can only say, Amazing. I can't believe that they did it.

@Hiddencomment007 3 ай бұрын

Whenever I have increased back pressure I take peptobismal

@ddigre01 3 ай бұрын

This is got to be the first time we've seen you shooting inside

@BallisticAviation 3 ай бұрын

it wasn't by choice. gemtech had us go to an indoor range for the initial demo of the new cans and the GAVAC uppers.

@Cashforfeet 3 ай бұрын

It’s wild that nitride or nitride lime coatings have seemingly gone from a novelty and something low budget gun makers do to now it seems like almost everyone has a nitride barrel out there

@BillyWillicker 3 ай бұрын

Nitriding is what it is. A cost effective finish that is very corrosion resistant, toughens and hardens the surfaces and has fairly appealing visual properties, it also does not change the dimensional aspects of the treated parts. It's become a well-accepted part of the industry as the cost/benefit is good.

@archipelago93 3 ай бұрын

For sure. I bought a typical AR-15 from PSA 6 months ago and its barrel is nitride finished (with 4150V chrome moly vanadium steel)

@BillyWillicker 3 ай бұрын

@@archipelago93 It's not limited to "low budget" manufacturers either. DD used to nitride their S2W barrels and I'm pretty sure they only CL/phos them all now out of convenience. I have a Triarc barrel that is an absolute laser that is nitrided. Criterion does their SBN stainless line as well.

@ALovelyBunchOfDragonballz 3 ай бұрын

Nitriding is cheaper than chroming. Chrome is more durable by a long shot, but for 99% of customers nitriding is fine.

@BillyWillicker 3 ай бұрын

@@ALovelyBunchOfDragonballz Many people are getting very similar round counts from buttoned nitride barrels as buttoned chrome-lined barrels. Most of the "longer life" you get from "chrome-lined" barrels is coming from hammer forged, heavier chromed examples. But yes, hammer forged, thick chrome barrels do have longer lives than 99% of users will need.

@chrisb8046 3 ай бұрын

I honestly had no idea Gemtech was still a functioning business.

@kevinalmgren8332 3 ай бұрын

It’s a subsidiary of Smith & Wesson

@ElTejon47901 3 ай бұрын

Smith & Wesson & Gemtech.

@Keystone92 3 ай бұрын

I broke an optic mount shooting off a lead sled like that… all the recoil is hitting the optic system. I started using a bipod and rear bag. It’s just flat out better than a lead sled in every way. Having 2 separate points of contact for you shooting rest is better than just one. Also with your bipod it’s nicer to shoot because if you load it forward properly, you get a very pleasant and natural recoil simulation, which returns to the same position. With the rear bag you can get a more natural body posture around it, plus you get a very natural elevation control just by squeezing and relaxing your hand. It’s a lot more portable too

@joem527 3 ай бұрын

Hop in an indoor range? That’s like seeing James in a food stamp office

@hopewilliams6705 3 ай бұрын

I have been curious about this! But it seemed nobody was going to cover it. Thanks Hop

@johndaniels1197 3 ай бұрын

IIRC, one of the very early versions of the Honey Badger had a bore evacuator which was removed from later iterations of the design.

@johnb.6468 3 ай бұрын

Yes! Was waiting for the next video drop!

@OvTheAbyss 3 ай бұрын

Had this upper for about a year at this point. Shot with and without an Abyss on the end. It's a really nice upper and shoots well. My only complaint is the crush washer and ETM flash hider. Mine was out of spec and locked the silencer mount onto the muzzle device. Both are still sitting in a bag, attached, and I've since swapped to a different mount. Other than that, which Gemtech is supposed to have fixed at this point, it's a solid upper/silencer combo.

@tylerfrogley1227 3 ай бұрын

Makes me wonder if the integra isn’t selling that well so they found another use case for their bore evacuator system. I remember learning about the bore evacuator block they were using in their integra and thought it was interesting for an integrally suppressed 556 design

@austinkeen4577 3 ай бұрын

Out of all the uppers out there, this is definitely one of them. Possibly, even one of the all time

@Deltarious 3 ай бұрын

I gotta ask since you shoot suppressed so often, is lead a concern for you/any interest in testing yourself for it? Genuinely curious what your levels would look like

@jasonharrison25 3 ай бұрын

Most bullets are covered in copper so exposing yourself to lead is less of an issue

@jamiehsiao4283 3 ай бұрын

Hop really like that MRO

@homerj109 9 ай бұрын

Thanks for keeping it real as always Hop! Stay golden!

@archipelago93 3 ай бұрын

How is this comment 6 months old when the video posted less than 24 hours ago? 😂

@timowens7214 3 ай бұрын

Have that same rail on my 8" 300 blk. Of course the 7" version. Solid AF 💪🇺🇲

@MoonMoon-gu2ge 3 ай бұрын

I got 3 s2 videos, a hop video, and a tripp video, today was a good day.

@MCLEO983 3 ай бұрын

Seems to be an LEO package meant to pair with gemtech suppressors as a package deal of an agency

@BallisticAviation 3 ай бұрын

👃

@TheAfterPein 3 ай бұрын

I sure hope that was made on a Friday. Needing to grind a pin down seems odd on a proprietary system. They didn't source pins made to certain dimensions? Okay...

@TrollinCrazyRussian 3 ай бұрын

Very cool!

@kellym3531 3 ай бұрын

Rocking the SWFA.

@ghostdog662 3 ай бұрын

I just saw some pictures from the Navy, it looks like your scope is on backwards

@ALBert-zk9rw 3 ай бұрын

the new pws uxr has this feature on the barrel as well

@rpblccmmndo389 3 ай бұрын

Idk if the ending is intentional but it's comedy gold

@ETHRON1 3 ай бұрын

MI handguards are a definite step above "most"factory handguards which usually look and feel like they were cut from a piece of tubing and had mlok slots cut in it..

@robertkoonce8365 3 ай бұрын

If you want to decrease back pressure, flow thru suppressors will do that without screwing with the internals. The trade off is less sound suppression.

@bigfootgoesboom 3 ай бұрын

I’ve never understood the rationale behind a suppressor that suppresses less. Having a larger volume would reduce back pressure and make it quieter. Suppressors should be fatter

@senorFrog2032 3 ай бұрын

I love the hodge .625 gas port approach, but hate their price. Buffer spring and buffer tube weight are the easiest to change on a rifle or find middle ground to work with or without a can. I use a strong spring and h3 suppressed then an H2 and mil spec strength spring. But I have a regular baffle suppressor

@ToastbackWhale 3 ай бұрын

That’s not even really the trade off. Go look at third-party metrics like PEWScience. The FLOW762Ti performs very well at both the muzzle and ear, the CAT stuff does even better, and the highest rated suppressor at the muzzle at the time that I’m writing this is the PTR Vent 3, which is also has low back pressure due to its PIP technology. Even if you look at something like the FLOW556k, I’m pretty sure it still has the highest ear suppression rating, though it suffers at the muzzle (relatively speaking, it still outperforms some baffle cans lmao). It’s not about more or less backpressure, it’s about what you’re doing to the gas.

@borkwoof696 3 ай бұрын

The newer Huxworx suppressors are actually quite good in sound reduction

@borkwoof696 3 ай бұрын

@@bigfootgoesboombecause worse but decent suppression is still leaps and bounds above no suppression

@kayayay9791 3 ай бұрын

I love the 'special' sticker on the ears lmao

@89sirmonk 3 ай бұрын

I'm not sure if this is the same thing, but Smith and wesson demoed a year or two ago a gas/barrel system inspired from tank barrels designed for suppression of the ar di system. I'd like to try it out. Seems like a good idea.

@SPECIESUNKN0WN 3 ай бұрын

This would have been a great upper for Gemtech to bring back the their adjustable BCG. Probably would have been an ideal suppressor host.

@Argentum88 3 ай бұрын

They can't, Bootleg patented the features of the adjustable BCG so Gemtech is no longer able to offer it. That's literally why Gemtech developed the GVAC system.

@tony1990 3 ай бұрын

@@Argentum88the GVAC system was already in use on the Integra uppers

@Jooglesberry 3 ай бұрын

the semi auto carriers are lighter so it's kinda like running a slightly lighter buffer, so I actually used one to get a slightly undergassed gun to run

@marcusborderlands6177 3 ай бұрын

It's just so fucking dumb tho, just lighten it in other ways but leave the trip surface :(

@mtnbound2764 3 ай бұрын

this makes me wonder about incorporating a bore evacuator design into the actual suppressor or the suppressor mount possibly.

@sluttybutt 3 ай бұрын

Perhaps some kind of technology that allowed the gas to flow through the can and evacuate the end of the bore

@ALovelyBunchOfDragonballz 3 ай бұрын

A couple companies have done some shady marketing practices around suppressors (looking at you, Sig) , and while i dont feel like this falls into shady, it seems less than optimal. Sorta on the right track but not quite there. Cost: My uppers were $1340* each w/charging handle at MSRP prices and its not gassy at all because i bought barrels with an appropriate sized gas port. So appropriate that a "just as good" BCG was actually short stroking without a suppressor on. I dont know how much of the cost goes to what, but this seems like a rather expensive way to achive very little. Aero Enhanced upper, Radian CH, BCM BCG, Triarc Track 2.0 barrel, Riflespeed gas block, and Mk4 Federal handguard. Thats 1340 with higher end parts too, get a basic tunable or Superlative Arms gas block and bump the handguard down to a NightFighter and youre in far cheaper with basically the same effect.

@toddparsons2980 3 ай бұрын

As negative as you come across this uppers sure appears to be well done. I'm liking this.

@Whiskey11Gaming 3 ай бұрын

Huh... always wondered if this would work on rifles to help pull the gunk out of them when running suppressed. Cool it works. Not $900 cool though...

@philclodfelter5994 3 ай бұрын

Have you ever tried a JP Silent Capture Spring system? Hate the buffer & spring setup

@D.M.Luiz. 3 ай бұрын

Hop how does your new ptr hold up compared to your sig and ruger battle rifles?

@BallisticAviation 3 ай бұрын

that ending was 🤌

@christofrini 3 ай бұрын

Sorry if I missed it, but because it wasn’t abundantly clear to me, what does this upper actually *do*? Like I understand it has a bore evacuator and a high speed looking BCG, but do those changes actually do anything over any other 16” mid bbl 5.56? I know you said it shot well with low backpressure cans, but that’s kinda the point of buying a low backpressure can in the first place, most uppers shoot well with them with minimal tuning.

@lordhellfire153 3 ай бұрын

I'm wondering if you combined it with a KAK K-spec bcg and a low back pressure can if it'd be any better than just the exact same fucking setup on any other upper

@christofrini 3 ай бұрын

@@lordhellfire153 I’ll go a step further and say that since the K-spec doesn’t change the cam path, the gassing won’t be any different that milspec (except that less of that gas will be directed at the shooter), so I’m not even sure if the K-spec BCG would be necessary to replicate the effects of this upper.

@Hoplopfheil 3 ай бұрын

The dirty secret about suppressing guns is that most of the garbage comes back through the barrel, so even if you tune the gas way down you still get gassed out from the ejection port. The bore evacuator blows more of it out the front of the gun. But since it's not really tunable it helps to have a low backpressure can in the first place, and then it's really only a nice feature and not a game changer.

@jammbbs1688 3 ай бұрын

You still need to try out an armalite M153GN18 or one of the 308 versions

@YeOldeHobo 3 ай бұрын

You mentioned in your Q&A that your focus shifted from handguns after you thought further about the most likely defensive choice for a civilian. What was your train of thought that changed that?

@jeremyfigueroa1683 3 ай бұрын

Will this upper work with a huxwrx really well? Nd really good upper receivers that are carry handle uppers? A1 vs a2 vs daniel defense fix iron vs scalarworks fix iron vs lmt fix iron. Your honest opinion. Doing a 12.5 fix iron, fix front sight, centurion arms front sight cutout rail, mid length gas

@StorminNormanTheMormon 9 ай бұрын

Maybe if they sold the gas blocks standalone I'd be likely to try it

@sgthop 3 ай бұрын

You'd need the barrel too, as it has a special profile.

@ZroCool_Garage 3 ай бұрын

Do they sell just the gas block?

@xnopyt13 3 ай бұрын

Why are the two videos next to this one had their comments disabled? People couldn’t behave?

@Hoplopfheil 3 ай бұрын

I've reenabled comments on two recent videos today, twice. Something is not working right!

@xnopyt13 3 ай бұрын

@@Hoplopfheil that is indeed weird, thanks for clarifying.

@Hoplopfheil 3 ай бұрын

Apparently it's not just me, which is reassuring I guess.

@xnopyt13 3 ай бұрын

@@Hoplopfheil I see, that’s good

@jimyeats 3 ай бұрын

So, is this better than just using a Superlative Arms gas block with their Bleed Off mode? Or for that matter, is this better than just an adjustable gas block that you properly adjust?

@Hoplopfheil 3 ай бұрын

Yes

@xmmTokarev 3 ай бұрын

Gem alert!

@randomidiot8142 3 ай бұрын

Is the back pressure actually increased, or is the barrel's ability to vent gas out of the muzzle before the breach opens compromised? Pedantics. Some people think that adding a suppressor increases chamber pressure and don't understand what over gassed actually means.

@Hoplopfheil 3 ай бұрын

It sounds like you are the one being pedantic because the end result is more gas pressure going backwards, or as we might refer to it colloquially: backpressure.

@gus808 3 ай бұрын

doesn't BCM claim their Mk2 upper does something similar? its been for sale for a while now and i haven't seen you talking about it

@Hoplopfheil 3 ай бұрын

MK2 uppers have little cuts in the side at the charging handle slot, so you get a bit of gas deflection even w/o a gas busting charging handle.

@crow9149 3 ай бұрын

Hey Hop, I remember seeing a video you put out where you said something along the lines of "you recommended against night vision because it changes how your brain works" (that may not be an exact quote) Could you elaborate on this?

@Hoplopfheil 3 ай бұрын

Buying night vision will ruin your life and your rifle

@borkwoof696 3 ай бұрын

@@Hoplopfheilhow?

@woohoo8315 3 ай бұрын

Crazy thing happens. Once night vision is acquired, every rifle becomes front heavy and the wallet keeps thinning out.

@toddinfl 3 ай бұрын

@@borkwoof696addiction to nvgs is real

@WarriorOhio 3 ай бұрын

You should check out the K spec bcgs by KAK

@krowchuk1 2 ай бұрын

Gemtech upper, KAK spec BCG, Dead Air Nomad L, take your breath gas looking to get different can for this at some point. Quiet but the gas I just can’t shoot it. Didn’t try any different buffer weights.

@Mrgunsngear 3 ай бұрын

🇺🇸

@nathan_k 9 ай бұрын

8:53 - Wadsworth constant for the curious. 4:01 - I *really*, *really* hate manuafcturers who charge full ticket for an item that is crippled from the factory for inane, non-applicable reasons. One of these is "milling parts off barrels" or "chopping bolts short". If I am spending LMT money on an LMT, (and not given it for free as a "review" like some "influencers",) I expect whole hog product -- up to valid responsible limit. If that limit increases over time -- the product should to. Imagine a company trying to sell a postban-profile bull barrel on a platform nowadays; and not as minimal alternative to a ban-state where it's necessary (and will be corrected later).

@Hoplopfheil 9 ай бұрын

S&W's insistence on sticking to the sporter carrier is just fucking bizarre, are they really so afraid of the term "full auto carrier" sinking their business?

@DPolk98 3 ай бұрын

@@Hoplopfheildid the instant popularity of their AR-9 not remind you who their customer base is? “Full Auto Carrier” would absolutely terrify those geriatric french fry fiends that patronize them

@jonathansmith7306 3 ай бұрын

@@DPolk98what's wrong with French fries?

@tony1990 3 ай бұрын

@@Hoplopfheil100%, which is why they also make sure to call their AR platform rifles MSRs instead

@starkparker16 3 ай бұрын

Just for the algorithm here but I got Michael Matthews in Amstel tomorrow.

@xBUSYWORKSx 3 ай бұрын

wonder if it would still function properly if you chop the barrel down to say...13.9

@Hoplopfheil 3 ай бұрын

yes

@Shane-eg5kq 3 ай бұрын

Hi hop

@mtnbound2764 3 ай бұрын

I wonder if all those extra holes in the barrel affect velocity much

@freneticfanatic 3 ай бұрын

It will affect muzzle velocity... by less than 5fps. Muzzle velocity has shown to be near identical from DI guns and bolt action guns in 5.56, with or without the gas block open or shut.

@mtnbound2764 3 ай бұрын

@@freneticfanatic yeah but this is much different than just a gas port hole. there is a much larger volume in the gas block chamber.

@ChucksSEADnDEAD 3 ай бұрын

@@mtnbound2764 The gasses have nowhere to go. So that volume is comparable to the bullet travelling a couple inches of barrel. Pressure loss is negligible.

@freneticfanatic 3 ай бұрын

@mtnbound2764 the volume of the chamber only doubling the volume of the gas tube and gas key doesn't matter so much because gas compresses and decompresses. The amount of time involved before the bullet reaches the muzzle and decompression begins causes what you're worried about not to matter in any practical way.

@waterhead1359 3 ай бұрын

I have ocd the barrel pointing backward , everything else forward triggers me

@the1andonlySherlock 3 ай бұрын

I'm curious how this compares to the bore evacuator on PWS' UXR

@Hoplopfheil 3 ай бұрын

Similar concept, different execution. The PWS UXR has a sleeve forward of the gas regulator, it's a separate piece so it's legally distinct and also still allows for adjustable gas settings.

@the1andonlySherlock 3 ай бұрын

@@Hoplopfheil I meant how they compare performance-wise, I should have been more specific.

@Hoplopfheil 3 ай бұрын

Probably impossible to know because one is piston and one is DI.

@the1andonlySherlock 3 ай бұрын

@@Hoplopfheil either way I'm super excited for the UXR.

@Hoplopfheil 3 ай бұрын

I really hope it actually comes out...

@calholli 3 ай бұрын

Neat

@parabola911 3 ай бұрын

Earth is not a spinning basketball careening through the void of space. We live on a stationary plane of unknown dimensions. Thanks, Hop!

@johnnewisland7720 3 ай бұрын

DNV-9 overview when

@Eagle52525 3 ай бұрын

What’s wrong with the Midwest industries rail?

@Hoplopfheil 3 ай бұрын

Ask the weirdos who like Geisseles and Wedgelock stuff.

@JBsX39 3 ай бұрын

I wanna know what that stain is on hops floor it’s in all his thumbnails and power points

@Hoplopfheil 3 ай бұрын

cranapple

@JBsX39 3 ай бұрын

@@Hoplopfheil yum!

@limpetarch98k 3 ай бұрын

Socko’s absence pales in comparaison to the fact you still make newer footage featuring the MRO. Cant have enough of the fact it doesnt even work?

@Hoplopfheil 3 ай бұрын

The best part about going to product launch events is I get lots of visitation time with MROs, and most of them aren't zeroed and sometimes they're broken!

@limpetarch98k 3 ай бұрын

⁠@@Hoplopfheil😬

@superfamilyallosauridae6505 3 ай бұрын

I would greatly prefer they just sell barrel assemblies for us to put our own handguards on, and install on our own receivers with our own bolt carriers.

@rogerwaters413 3 ай бұрын

Did you try using a standard BcG?

@Hoplopfheil 3 ай бұрын

For what purpose

@rogerwaters413 3 ай бұрын

To see if it would cause a malfunction. I feel like the change increased weight might cause a jam. ???

@Hoplopfheil 3 ай бұрын

@mrs.vasquezz 3 ай бұрын

Wow HOP with an SWFA 😅

@patrickhazen6324 3 ай бұрын

Gemtech used to be fantastic until they moved shop after they got bought out. They went the way of Kimber, QC went way down and prices continue to climb.

@brianneeley8806 3 ай бұрын

HOP, I can’t believe you let them hand you a riffle outfitted with an MRO! That’s when I knew you could not be objective… 😂

@flawseeingeye 3 ай бұрын

why do hop's eyebrows always look like they lost a fight with a campfire?

@SMACK1978 3 ай бұрын

Two vids within a month with Hop shooting an MRO. WTF is the world coming too?!? 🤷🏽

@Black_Heart_Defense 3 ай бұрын

What’s socko?

@themighty4th138 3 ай бұрын

The cat

@Black_Heart_Defense 3 ай бұрын

His gato or another cat?

@themighty4th138 3 ай бұрын

His cat

@mutejosh 3 ай бұрын

Lol at dropping a rod down the bore to check the alignment of the flash hider without the suppressor

@angryveteran8585 3 ай бұрын

HVAC upper?

@CDOES 3 ай бұрын

SWFA!?! OMMGGGGGGG!!!!!

@Hoplopfheil 3 ай бұрын

Unlocked turrets, zero out of ten.

@94twentytwo76 3 ай бұрын

@@Hoplopfheil😬☠️….. Clear tho 💯 and certainly fudd (endearingly) approved at my local gun club *RIPJERRY

@hijackbyejack1729 3 ай бұрын

hop looks exactly like stephen king

@jasonparent7967 3 ай бұрын

I feel completely cheated that there was no post shooting diatribe and Socko clip.

@Tallus_ap_Mordren 3 ай бұрын

Seems like they could just sell the gas block, and get 95% of the effects of the system

@user-tv4lz5ie5u 3 ай бұрын

4:01 LOL

@ghostpunkkilla 3 ай бұрын

I should be able to buy a suppressor at a parts store since it is a muffler.

@Token_Black_Guy 3 ай бұрын

Make your own bro

@BillyWillicker 3 ай бұрын

@@Token_Black_Guy Form what?

@yanniclariviere 3 ай бұрын

All these uppers…maybe someone can make one with a built in scope mount just to check every available box.

@rockerdude8000 3 ай бұрын

That is the first time i have seen a semi auto bcg i thought companies stopped making them like 15 years ago. i do care that they use these because it pisses me off to civilianize my firearms especially since it's not legally required

@williamflowers9435 3 ай бұрын

Ohhh… I thought I could buy myself a rifle and my wife a vacuum at the same time

@cute_smol_kat 3 ай бұрын

@joshmajor8662 3 ай бұрын

300 views with 364 likes!! I love math 😂

@randyhavard6084 3 ай бұрын

I don't know man for $900 I think they can throw in a cheap $15 charging handle even if I'm just going to take it out eventually and throw it on the top shelf in my closet