A Scammer Almost Got Her Gold Rolex...

Рет қаралды 1,770,601

7 ай бұрын

This watch went through quite the journey just to make it to Marshall! A viewer of the channel got scammed by someone posing as Marshall, sent the watch to that person, but thankfully had it returned. Then she sent the watch to the real Marshall and it got lost in the mail for a week, only to finally show up for Marshall to do a full restoration on it! Wild ride!
Support Wristwatch Revival via Patreon: / wristwatchrevival
Visit Sutcliffe Hansen for toolkits, revived watches, straps and more: sutcliffehansen.com/
Follow on Instagram for Project Updates in between video releases: @wristwatch_revival
------------------------------------
These are Amazon affiliate links to some of the equipment used for these videos and purchasing anything through them helps support the channel.
WATCHMAKING TOOLS AVAILABLE ON AMAZON:
Bergeon Screwdriver Set: amzn.to/34URcok
Dumont Tweezer #3: amzn.to/2YX4Hjl
Bergeon Springbar Tool: amzn.to/3LczDlJ
Bergeon Case Opening Ball: amzn.to/34VLbYg
Bergeon Presto Hand Removal Tool: amzn.to/3bfHtdo
Bergeon Movement Holder: amzn.to/3hQsY29
Horotec Hand Setting Tools: amzn.to/2Gdye1K
Rodico: amzn.to/32K0PDG
Bergeon Blower: amzn.to/34RgVxX
Bergeon Case Opening Knife: amzn.to/34VHr9e
Bergeon Quick Service Kit: amzn.to/2QHnScC
Ultrasonic Cleaning Machine: amzn.to/3i6BBER
Amscope Microscope: amzn.to/2EuReZ4
Multifunction Timegrapher: amzn.to/3Keceit
Sanding Sticks: amzn.to/3QFBcMg
CAMERAS AND AUDIO:
Main Camera, Sony A7III: amzn.to/2Dk3Q4K
Secondary Camera, Sony RX100: amzn.to/2Dlrwpx
Tertiary Camera, Sony A6400: amzn.to/3jVaYqh
Main Macro Lens, Sigma 70mm f/2.8: amzn.to/3lD4Wdb
Secondary Macro, Laowa 100mm f/2.8 amzn.to/2ZGmFKo
Camlink 4k Video Converter: amzn.to/3hTiiQf
Shure MV7 Microphone: amzn.to/3KaMlQC
Audio Recorder, ZOOM H6: amzn.to/31R11BQ
Small Sirui Tripod: amzn.to/3K82W7Y
Sirui Tripod Head for Overhead Camera: amzn.to/2QNoNZ8
COMPUTER STUFF:
Apple Macbook Pro: amzn.to/3k170fD
Synology NAS: amzn.to/3k5sZlx
Seagate HDDs for NAS: amzn.to/3hQ5hqt
Samsung Portable Drive: amzn.to/34UdhTT

Пікірлер: 1 800

@DrRandomStranger 7 ай бұрын

Marshall! Give us the state of your personal watch collection!

@Thebizel 7 ай бұрын

I'm curious about that too !

@frankv7068 7 ай бұрын

I seen a Pepsi on him and this DayDate, yea I’m also looking forward to seeing his collection.

@jasonchatham4170 7 ай бұрын

This

@colinwright5297 7 ай бұрын

Not a good idea parading one’s goods in public.

@jasonchatham4170 7 ай бұрын

@@colinwright5297 dude! Be quiet! We almost got him!! 😅

@93mshep 7 ай бұрын

This guy HAS to be undefeated in the game "Operation"....

@kwaaaa 2 ай бұрын

Lol, i spat my drink to this comment.

@saintvault13 Ай бұрын

LOL! Great comment

@coolbreeze6198 27 күн бұрын

😂

@andrewlevett4274 2 күн бұрын

😂😂

@famousamoso7 7 ай бұрын

As someone who doesnt wear watches, cant afford a Rolex, and has the patience of a 2yr old, this video was awe-inspiring. The attention to detail, the ability to remove every little component of the watch and know the exact order to reassemble everything is amazing. Every time you removed a component the amount of anxiety I was feeling for you was through the roof.

@cagneybillingsley2165 7 ай бұрын

this level of mechanical aptitude, attention to detail, and spatial memory is entirely genetic. you can't train it, you have to be born with it, then you hone it as you go through life and it selects you for this occupation. this is why a lot of occupations are generational.

@xTryst 7 ай бұрын

@@cagneybillingsley2165Anybody can learn how to repair watches. Some may learn faster than others, but your occupation is definitely not genetically selected at birth.

@juanroyroy2075 7 ай бұрын

@@cagneybillingsley2165I… disagree. You need a ton of experience and knowledge to be able to pull this stuff off. Does not come from genetics. I forgot to add that with the amount and access of watchmaking tools for varying budgets basically anyone can start doing this. Just my opinion though. For example I just purchased a knock off Horia Jewelsetter, can also be used for hand setting. Tools like these make it so that this type of thing can turn into almost a sort of hobby with how much easier it becomes.

@Fanta.... 7 ай бұрын

@@cagneybillingsley2165 Interesting comment. I guess we all have a particular talent, Its just a matter of finding what that is. Some are useless in some sense of the word, some can pay very well.

@sundance2005 7 ай бұрын

@@cagneybillingsley2165 Testifying to that, I am a retired aircraft mechanic, I worked on the big parts of the aircraft. But in the instrument shop where the cockpit (sorry we can't say that anymore) flight deck instrument were repaired most of mechanics there were or had been watch repairmen. We would bring our watched to them and most had a side business fixing watches. It takes very special skills to repair watched and instrument such as you find on an aircraft. But most of the new aircraft have 90% electronics. There are still a few standby indicators in case of an emergency when the chips are down.

@tylerk.7947 7 ай бұрын

I am literally blown away at how complex the inner workings of this small watch are. I didn’t expect that. This is incredible.

@stevenlengyel6651 3 ай бұрын

Definitely complex

@243wayne1 3 ай бұрын

What did you think was inside? A hamster wheel?

@ZapejoMC 2 ай бұрын

⁠would that really be so far fetched? I think a teeny tiny hamster could manage.

@patrickdoll1995 7 ай бұрын

Hey Marshall, because of the videos I got an old (non-running) pocketwatch from a flea market, took it completely apart and got it back together. Now at least I can set the time, wind it up and with a little pushing it runs as well. I replaced the broken main spring but the balance spring is bent too much and a few jewels are broken so it won't stay running for more than a few seconds but it was still a success in my book. Not ready to invest that much into the tools to fix it yet but it was incredibly rewarding none the less

@Quickened1 7 ай бұрын

It's a dying art, and unfortunately, the demand will only decrease as time goes by. However, there is great satisfaction in completely disassembling something, and then successfully reassembling it! I had a chance to receive higher education in the field when I was much younger, and still regret not doing it to this day... If you like it, get it while you can, before it's gone forever...

@snuffying 7 ай бұрын

@@Quickened1 its absolutely not a dying art. it just costs way more and not a lot of people are willing to invest time and money in this art, which makes the exissting ones more expensive

@Quickened1 7 ай бұрын

@@snuffying "not a lot of people are willing to invest time and money in this art"... The very definition of a dying art!!! The fact that this art is quickly disappearing, is the reason the ones left practicing it, become very expensive... Take it from someone who knows, it's IS a dying art... As wristwatches become less and less of a thing due to the cell phone, the demand for a watchmaker will also decrease, until one day, there will only be hobbyists in the art...

@160fossil 7 ай бұрын

The same way blacksmithing was down to less than 2000 people, now there are more hobbyist blacksmiths than there were professional blacksmiths at their height.

@jimtuna1354 7 ай бұрын

@@Quickened1lmao right says in not a dieing art then says not a lot of poeple willing to pay for the work to be done so y would people invest there time in learning something that doesn't have a high demand so yes it is a dieing art

@Quickened1 7 ай бұрын

Man, you took that apart like you knew what you're doing!!! I come here for your horological skills, I stay because you're an incredibly thoughtful guy... Awesome!

@jeremy.thejeweler 7 ай бұрын

Bench jeweler here. I’ve been refinishing Rolexes and rebuilding and refurbishing bands for years. It’s kind of one of my specialties and something that I just really love to do. If you’re interested, I’d love to give you some help with your refinishing. There are many things you can do to not only save yourself time and headache, but also just vastly improve the final product overall. I’d be more than happy to help. Anyway, I absolutely love your videos and have been a fan since you started. I think you are doing a massive service to the industry by exposing a huge new audience to the trade. Thank you!

@JohnRohoboth Ай бұрын

"you are" refinishing??? Learn English Jeremy.

@gandalfthegayridestoisenga4870 Ай бұрын

@@JohnRohobothone slip up mate, it's not like your perfect 🌚

@satchel5909 Ай бұрын

@@JohnRohoboth You are joking.. right?

@NaturesLantern Ай бұрын

Is this watch plated gold? Solid gold? or stainless in gold color only?

@pjaypender1009 Ай бұрын

@@NaturesLanternsolid 18k.

@wmdeutermann9317 7 ай бұрын

Marshall, I am a lover of old pocket watches and have had my share of both scammers and poor workmanship. My most recent experience was a restoration of my father's Illinois wristwatch. A beautiful and expensive job, but it only runs when lying flat on a shelf. The same professional analyzed my 19 jewel Elgin lever set problem and concluded that the lever opening was too small and needed filing. I declined. My wife suggested that I learn to do it myself. After watching many of your restorations I signed up for the watchfix classes and started exploring many of the books out there as well. I have learned enough to be aware of how little I know! At the age of 85 this past August, I am not sure how far I can sail but so far I am successfully launched. When I opened my Elgin to examine the lever problem, I immediately realized that the restorer had simply indiscriminately oiled here and there and did little or no cleaning. As I write this, all parts other than the dial, hands and pallets are in the sonic cleaner. I will never stop watching your videos and learning from them. Thank you for providing the stimulus this old dog needed to learn some new tricks! Yours, Bill Deutermann

@w2cfx 5 ай бұрын

Hey just stumbled upon this comment and want to say it's amazing to see someone at 85 still picking up entirely new skills. I hope it isn't patronising but I'm cheering for you!

@wmdeutermann9317 5 ай бұрын

. Thank you. 😊

@rawr51919 4 ай бұрын

Nice to see an old-timer giving it a try! Hope it works again after you're done!

@wmdeutermann9317 4 ай бұрын

@@rawr51919 Running nicely! So far it gains about a minute a week. The set lever probldm turned out to be nothing more than a loose screw LOL. I'm working on an Arnex 6325 just now. It had a broken screw in the barrel arbor and 5 missing teeth on the barrel lid gear. After a few days of searching, I found a gentleman in Canada who had 5 "new old stock" barrels complete with spring. Awfully nice chap. He threw in a couple of parts an a new screw! We are off to Edinburgh for Christmas and Hogmanay with family including our almost two month old grandson, Angus Ironsides Graves. When we return, my new parts will be waiting. Life is sweet. ,,,, c'', }

@wmdeutermann9317 2 ай бұрын

My Elgin is doing great! And the setting lever problem turned out to be nothing more than a loose screw that served as the lever's axle LOL.

@gcmehojah 7 ай бұрын

You are so much the Bob Ross of watch restoration. Thank you for all of your videos and content!

@iliketowatch. 7 ай бұрын

I know what you mean! I'm not even into watches (haven't worn one for years) but his videos are so well made and satisfying to watch that I can't resist.

@steviedmrbk5179 7 ай бұрын

Happy little mainspring! 🤗

@dont-want-no-wrench 7 ай бұрын

please, bob ross was a hack with a schtick

@brandonriddle4381 6 ай бұрын

I knew if I scrolled, I would see a negative comment. Should have resisted. It never fails.

@christinacasteel3198 5 ай бұрын

Bob Ross???🤨 He is much more a Rembrandt or Monet🥳

@Mawyman2316 7 ай бұрын

As an engineer I love seeing custom tooling but god man you must have tens of thousands of dollars of gear for this. If only we could all be able to do our hobbies this justice

@AzecTheButcher 7 ай бұрын

The patience to do one edge at a time on that bezel is extremely impressive. Excellent restoration!

@thirtyohsixer 6 ай бұрын

Must be satisfying for Denise to have a video of the watch being restored. Like the ultimate sense of comfort your watch is back to brand new.

@chrismack5908 7 ай бұрын

I'm so happy for Denise that you were able to restore her Mom's watch for her! Here's to wonderful memories, Denise!

@TUTOMIA 7 ай бұрын

Thanks so much Chris! I'm over the moon!

@Smartzenegger 7 ай бұрын

Denisimo!

@margodphd 7 ай бұрын

@@TUTOMIAThat must have been an awful experience. Glad to know it all ended well, it's worth so much more by being a family heirloom. I have no idea what type of person can live with themselves scamming people for living :/

@TUTOMIA 7 ай бұрын

@@margodphd it was awful, yet a learning experience. I am so blessed that the watch was "returned to sender". These scammers are mostly very good at what they do. We're all so vulnerable.

@skwerlz 7 ай бұрын

The appropriate term when there's a person directly controlling the machine is "manually machined." I'm still in absolute awe of the craftsmanship in these watches, particularly anything before 1960. The tolerances these people maintained and the size of these parts are crazy.

@LiborTinka 7 ай бұрын

I always had a respect to watchmakers (something I would never had a patience or nerve to do) but seeing you actually do the job is jaw dropping. I work in a lab and it's often tedious precision work (with a tiny error-margin) from time to time, but this level of precision and ingenuity that humanity achieved many decades ago and still improves is hard to believe. Keep up the good job!

@2creativo11 7 ай бұрын

Denise is so fortunate to have such a piece in her family and very lucky to be able to see her watch being refreshed like this. Thanks for the great vid!

@mrblack5145 7 ай бұрын

My daughter wanted to watch this before school with me, unfortunately we had to cut it short; per her request, I am supposed to pass it along that you failed to say "bacon grease" (braking grease) during the barrel reassembly. Its her favorite part. She also says this is the most beautiful watch shes ever seen, and she wants one herself. Excellent work as always, I'm confident Denise will enjoy it and it will be a treasured family heirloom for years to come!

@aserta 7 ай бұрын

If you keep an eye in local markets, they sometimes pop up. Could make a good graduation gift one day, when she's older.

@mrblack5145 7 ай бұрын

@aserta you're right about the gift idea, unfortunately I've got multiple children so I'd have to get an equal gift for the rest of them but I can only spare one kidney. 😂 I'll keep my ear to the ground though. She really is fascinated by mechanical watches and she's got a small collection of non-functional pocket watches that she'd like to get up and running someday.

@NoobsofFredo 7 ай бұрын

@@mrblack5145 Might think about getting her some books on watchmaking/restoration, or possibly some of the basic tools if she's of an age where she could use them (or save the idea for the future if she isn't). My understanding is that those old pocket watches are great practice for beginners, and that'd be a great way to get them running again if she's really passionate about it.

@mondrose4501 7 ай бұрын

im a bit of a tinkerer myself. and yeah a bit similar situation with you, while the boys run around......with their mom (they follow after her i assume), a knock on my diy workshop corner door and a peek from my daughter, askin what im doin and just sittin there silently watchin me workin on some treatment to the steel. and now she can help me doin something already. i kinda expect my boy to do this but its my daughter instead.🤣

@TUTOMIA 7 ай бұрын

Mr. Black, I'm beyond happy to know my Moms watch was in gifted hands. She's going to arrive today. I can hardly wait. I love that your daughter calls the braking grease, bacon grease. Too cute. I think your daughter has excellent taste in watches. Good for her, maybe not for you if it comes out of your wallet. :) But your daughters worth it & she would treasure any watch you'd get her, for sure.

@AnOldYoungGuy 7 ай бұрын

Always great to see a new video from you, Marshall! You're by far my favorite watchmaker!

@JuneQuinn-sz5pr 5 ай бұрын

Great job Marshall…I’m a retired watchmaker (in the early 70s I was the youngest licensed watchmaker in the State of FL) and wanted to comment on the dial issue you mentioned. You are absolutely right about trying to clean up old watch dials…you can do way more harm than good. Back in the day, I used to send damaged dials to a company in Miami (Miami Dial) to be refinished. Bob, the proprietor, did a fabulous job of making those old worn out peeling, flaking dials look brand new AND for a very reasonable cost. Are there still companies around that provided such a service?

@fresky5370 7 ай бұрын

I have a Seiko, special to my heart because my dad bought it and gifted it to me. Not looking for you to fix it just wanted to tell you it's story. I sent it off to be serviced in Japan, unfortunately this was just before the tsunami. The storehouse where is was got destroyed and my watch was lost. Two years later I got a package and amazingly it was from Seiko, my watch was back! Fairly damaged on the outside with a cracked screen, damaged bezel and scratched up to hell but still working perfectly. Apart from battery replacements and a clean or two at my local jewelers I haven't let it go out of my sight since.

@tonys9413 7 ай бұрын

Marshall, you bring order to a crazy chaotic world. Thanks for the therapy, and the always great video!

@unfi6798 7 ай бұрын

Totally agreed.!

@Jeroen_W 7 ай бұрын

I have nothing with watches but this is very therapeutic and fascinating to watch!

@gregc2467 7 ай бұрын

Agreed, one of YT's most decent people.

@Trapper50cal 7 ай бұрын

On some symbolic level, watching you return complex systems to order from disarray helps me maintain a healthy confidence in my ability to solve problems and endure whatever strife I may be experiencing. Very therapeutic and calming. Along with just the pure joy of learning about automatic movements :-)

@cellajones 7 ай бұрын

I totally agree. I was in a terrible mood before starting this video, and it has put me in a wonderful calm place and restored my faith in humanity as well. Thank you for your labors of love!

@dobiejames9881 5 ай бұрын

I must say that your videos are captivating, I literally get into a zone and block out everything thing around me while watching you service these watches. Thank you, Marshall.

@ShodHorse 5 ай бұрын

I've been watching your videos for awhile and I'm always impressed with the fact someone who has no idea what parts are which and their functions, but you always explain everything in a way that is understandable. You never leave out the simple stuff. Keep on keeping on.

@garetkonigsfeld2 7 ай бұрын

Very nice, I really like how respectful you are with your work. I've never seen you do to much but you always do what's necessary. Thanks for taking us along 👍.

@Saratoga1965 7 ай бұрын

I’m amazed Marshall! I’m not a watchmaker, not likely to become one in my retirement years and in fact, not the least bit mechanically inclined. But,…. you’re able to hold my interest and bring me to concentrate on every detail and nuance of what you do. It’s apparent to me that you’re a skillful and talented watchmaker. You’re also modest and I particularly like that about you. I’ve been carefully studying your videos and little by little learning the nomenclature and procedures to the point that I’m often catching myself smiling self satisfactorily whenever I’m able to call out a part or procedure before you yourself. Please keep doing what you do and how you do it. It’s always educational and entertaining as well. Thank you Marshall for many hours of rich and well done content. I wish you all the best of success going forward. Chet

@auntkaz815 4 ай бұрын

You are an absolute artist. No cutting corners. And restoring to the original look even if it takes a lot of time to make that happen… Respect to you. Sir!

@ritaamundson3094 7 ай бұрын

I’m not one to comment on videos much. But I adore your work and your videos! I stumbled upon your channel and was quickly hooked! I love your explanations and how it works insights. Your love of the craft shines through. My only complaint is that I worked my way through all your videos and in trying to find others to watch I realized what a high quality product you create. I’m having trouble finding another creator that covers all the points you do with the appreciation and joy you show. You have spoiled me. You are my standard and most have come up short. Appreciate what you do and look forward to more in the future.

@rogerrocco5211 7 ай бұрын

I’m not aware of your full time profession but I hope you love it as much as your hobby. It’s a pleasure to watch you work because it is so obvious that you love what you’re doing. Congratulations for discovering such a wonderful and satisfying endeavor. It suits your personality beautifully!

@kageotaku 7 ай бұрын

He works as a commentary for Magic the Gathering. He also has a podcast on the same topic. I believe the commentary jig along with writing articles is his main income.

@vezokpiraka 7 ай бұрын

@@kageotakuit's wild to be a Magic player that knows Marshall from there and see people on his watch channel who only know him from this. Marshall is truly amazing

@fafadk 7 ай бұрын

It's always a very wholesome experience to watch you work. I love your dedication and genuine care, both for watches and owners. Cheers.

@robsterenborg6318 6 ай бұрын

repairing these tiny watches is one but each time I look at this, I am more and more impressed how all these parts were machined and produced. Well done repairing this piece

@stevensanders1972 16 күн бұрын

I can't tell you how therapeutic and reassuring your channel is. Keep up the great work and thanks for being a terrific person!

@mikefochtman7164 7 ай бұрын

Always enjoy your videos. The great detail and time you take is an inspiration. Whenever I think of how tiny all those parts are and you just tear it down and service these instruments, I'm totally impressed. Thanks for taking the time to share.

@jackiemainard2576 7 ай бұрын

Never would have thought that watching watch repair could be so relaxing! Thanks for making this fun and educational!

@Yonder. 7 ай бұрын

this is one of the only youtube channels i cant skip through its so enjoyably to watch every single detail of the watch and it being brought back to life!

@greatpunit 7 ай бұрын

Such indulging video. Your videos are therapy. It calms me down. I have started watching your videos when i am in stress! Thanks a ton for such clean videos!

@brians654 7 ай бұрын

Stunning camera work; the close-ups of the crown gaskets were amazing. Thank you for putting so much effort into these vids, much appreciated.

@MrJoeinz 7 ай бұрын

Marshall . . . you're a wizard ! Your hobbyist days are over . . . it's all craftsman from here ! Thank you for the entertaining dismantlement and rebuild ! Bravo, sir !

@johnzee691 7 ай бұрын

awesome video as always. the way you explain things then have the right closeup camera shots covering ALL the angles and of course ALL the right tools. very nice

@peterduncan1322 5 ай бұрын

If my Mother or Father had given me their watch and I had watched this video , there is no way I would not have tears rolling down my cheeks , not only for the care and craftsmanship you showed but the memory of those I have loved all my life. Again sir my hat is off to you...

@tgh965 7 ай бұрын

What an incredible story right out of the gate! I've been watching you work on watches for more than a year and I really love what you do. Thank you for bringing us along!

@philiprice7875 7 ай бұрын

i can not imagine what the owner was thinking about,1st sending it to a scammer, getting it back then lost in the post, i bet she felt sick and in tears, but now those tears are of JOY, great work Marshall.

@TUTOMIA 5 ай бұрын

@@philiprice7875 Hi Phillip that 's pretty much exactly how I felt during the crazy watch journey. Marshall is an incredibly kind and talented person. Someone mentioned in the comments, that I should buy a lottery ticket, one day maybe I will. I do feel that I was very lucky in this instance, but more blessed than I could imagine.

@1959Berre 7 ай бұрын

Always a pleasure when a new video pops up on this channel.

@robertsmeal8193 7 ай бұрын

Great videos always! Happy to know that the watch is in good hands and repaired properly.

@emmanuelnoisette8937 7 ай бұрын

Marshall you show that you are a real expert in watch service , if ever have a watch of this model you will be the one to send it to. great job.

@steadyeddie7453 7 ай бұрын

I don't know how I landed on this video but I have a newfound respect for a trade I knew little about- watch repair. And as a retired machinist I enjoy looking at the precision tools made just for this kind of work. It's eye candy for me. Cheers.

@andykrousti1831 7 ай бұрын

Amazing as usual Marshall. Would love to see you do a Chronograph like a Speedmaster one day!

@canadian_american84 7 ай бұрын

Been watching you for about a year and half now and its crazy the evolution of youre learning and tools!

@MikeGervasi 6 ай бұрын

I don't really wear watches anymore but I do appreciate the mechanics and art of them. I enjoy seeing you work in detail and there's something satisfying about it.

@richardlincoln8438 7 ай бұрын

Wonderful work Marshall. Thank You for the time and effort You spend to share it with us. Best Wishes.

@darolfitch8917 7 ай бұрын

Thank God, the watch found it's way to you. The owner must be so relieved. What a beautiful watch. Thanks for the video.

@TUTOMIA 7 ай бұрын

Relieved hardly describes it friend, Thank you for thinking she's Beautiful. Marshall is an incredibly talented man.

@Smartzenegger 7 ай бұрын

I think he has the same watch, as you can see him wearing it on his wrist during restoration. @@TUTOMIA

@DecemberNames 7 ай бұрын

I just wanted to take a moment to say how amazing your video was! I was really impressed with the quality of the footage, the editing, and the overall presentation. You did a great job of explaining the topic in a clear and concise way, and I learned a lot from watching your video. I also really appreciated the way you made the video engaging and entertaining. You kept my attention throughout the entire video, and I never felt bored or lost. I would definitely recommend your video to anyone who is interested in learning more about the video.

@josephwimerYoYoYo 7 ай бұрын

Amazing. This story, and video, makes this watch all the more special!

@micahsexton4281 7 ай бұрын

My pocket watch and screwdrivers arrive today! So ready to start dipping my toes into this hobby, partly because of you. Keep up the excellent videos!

@Daindrais 7 ай бұрын

It is such a lovely, dainty little timepiece. And a beautifully executed restoration! Thank you, Marshall.

@mrxman581 24 күн бұрын

So impressive to see the care and attention to detail you demonstrate in your work. Well done. Thanks for sharing.

@onemorething100 Ай бұрын

You're such a professional. I enjoy watching confident people apply their craft

@MikeT 7 ай бұрын

I know a lot of people love patina but I like that you restored the case. It looks great. Also, F the scammers

@TUTOMIA 6 ай бұрын

Hi Mike. I love how she turned out. I completely AGREE with you, F the scammers.

@eTraxx 7 ай бұрын

I am always amazed at how precise and well made these small parts are. Wonder and more wonder.

@imdeaded 4 ай бұрын

Such a treat to see this video. Coupled with your voice it has a soothing relaxing asmr feeling. Speaking about hobbies, id rather vicariously hobby watches through you. Watching you disassemble and reassemble them is relaxing. Thank you.

@therealstorey 7 ай бұрын

Great video and attitude even the missed the gear and not edited out. Good Work and a joy to watch.

@hada7552 6 ай бұрын

Those scammers are such lowlifes. Keep up the good work Marshall!

@legacywatchguy8333 7 ай бұрын

Dude, you have way more guts than me. Takimg on the family watch for a total stranger scares me to death...so many things to go wrong! Well done.

@Sasser2015 7 ай бұрын

Clicked to hear hear the scam story, but was fascinated by the disassembly and reassembly. Really beautiful piece and so satisfying to see it restored.

@TopherToke 7 ай бұрын

So excited to see you restoring the case!!!!!

@chrisdavidson9431 7 ай бұрын

Another fabulous video for us all to enjoy - thank you Marshall - keep it going 👍

@davidconnelly 7 ай бұрын

This is fantastic. The best of KZfaq! Loved it. Beautiful watch and super interesting restoration.

@amandahutchison5360 4 ай бұрын

I watch your videos with total awe, there are so many tiny elements in each watch fascinating and so satisfying when you get them back to full beautiful working order

@rayg3408 7 ай бұрын

What an amazing video. Being able to film, even the smallest pieces while you scrape, the rust off is so awesome thank you for sharing this video

@ChipsPlace1952 7 ай бұрын

Marahall, I have been away for a while, and you still amaze me of the talent you bring to reatorarion. You are great in your explainations and it seems.when a question pops into my mind, you answer it. I am sure what you do is no different than build an automobile engine, it can only go back together one way. The right way. I do.want to try my hand at it but.....something really simple. Thanks for your time and effort.

@aq5426 7 ай бұрын

I love your videos, Marshall! Such a lovely watch--thank you for the work you do!

@TUTOMIA 7 ай бұрын

Thank you, I'm so glad Marshall brought Moms watch back to her former glory. He's just so talented.

@savage22bolt32 7 ай бұрын

Thanks very much!! I've watched a few of your vids & am subbed. This particular episode was my favorite. I loved the way you explained so many interesting points, starting right at the beginning. P.S. And a huge thanks for not ruining it with crappy background music. Your narration as you go along is perfect.

@Dadzilla2 7 ай бұрын

I truly love watching someone working on something they know so well. I used to do electrical work on cars and trucks. I'm freshly retired but I used to see a lot of the high end cars, and I would often askthe client to please go find something else to do while I work on the car. Otherwise I get them looking over my shoulder asking questions, getting in the way and often the get nervous with me taking a 100,000 dollar car apart. I have to reassure them that it will go back together good as new. Recently my father turned 90, I remember as a boy he had this pocket watch that looked so cool. If I can find it, I would like to contact you to see if it may be worth my while to get it tuned up / repaired. I remember it kinda ran but would stop so from watching what you do it may not have to much wrong with it other that a good cleaning and so on. Thanks

@FireAngelOfLondon 7 ай бұрын

Fantastic. You don't just treat this like a job to be done you take it to heart, which is great for you and your customers. Work you love doing isn't work, it's being paid to play, so you'll live longer and have a lot less stress if you can find something like that to earn your living. I hope Denise also sees this and appreciates your passion for your work.

@TUTOMIA 7 ай бұрын

Hi there! I absolutely appreciate the passion & kindness of Marshall. I believe he's the best watch repair artist out there.

@Strenam 7 ай бұрын

Love the vintage sub, Marshall! And a solid gold day-date, YT life is treating you well.

@sneakerhead6184 7 ай бұрын

You are absolutely the Bob Ross of the watch world!! 👍👌 Your work is flawless and I find your voice to be rather soothing. Keep up the amazing work!!

@donfritz8966 7 ай бұрын

Amazing how you are able to put all those pieces back together! I have trouble reinstalling a door set.

@scottcol23 7 ай бұрын

It always amazes me how someone actually designed these and made it work using nothing more than a pencil paper and an idea.

@nwvfd22 7 ай бұрын

I haven't slept in three days binging your videos and I can't get enough! It's so relaxing to listen to an expert talk about their craft in such easy to follow bite sized pieces. And your so understanding of the stories of the watch and the meaning to the person. Much respect Marshall.

@malachycomac5382 4 ай бұрын

It's Incredible the precision that is required to make a high caliber watch. Especially like the self winding mechanism which uses your own arm movement to trigger a pendulium to power the watch.

@Star1957able 2 ай бұрын

I am in awe of your restoration skill and knowledge of these intricate time pieces. Enjoy your videos and narrations

@bluegizmo1983 7 ай бұрын

😳 I would NEVER be able to get all those parts back together without ending up with "leftovers" 😂

@richardhutchison3123 6 ай бұрын

Congratulations Denise! What a beautiful memento from your Mom and Dad!

@TUTOMIA 6 ай бұрын

Thanks so much Richard, I've become so attached to "her". I wear her every day & it brings me great joy. Marshall did an awesome job. He's the best in my eyes.

@kjcoach12 7 ай бұрын

Marshall, great video as usual, you are the best. You encouraged me to start my watchmaking journey and I wanted to thank you. Provides me with peace and calm 😊

@mathiasklareus1782 7 ай бұрын

When you said "if it is your first time with us", think about the joy of having all videos to see for the first time 🎉🎉 You my good sir, is fantastic!

@PistonHeaven 7 ай бұрын

This has to be the most positive comment section on KZfaq! Marshall! Any chance you could try and make a “Franken watch” possibly from left over parts you have?

@noelsazias 7 ай бұрын

Dear Mr Marshall, I wanted to take a moment to express my admiration for your incredible work as a high-end watch restorer. Your dedication to preserving and reviving the beauty of these timepieces is truly inspiring, and I find myself continually captivated by the craftsmanship you bring to each piece. As someone who shares a deep appreciation for the artistry behind these watches, I often wonder, what timepiece do you personally enjoy wearing? It would be fascinating to hear about your preferences and discover if there are any particular watch brands that hold a special place in your heart. Your passion for horology is evident in the meticulous restoration work you do, and I believe that your personal preferences and insights would provide a unique perspective on the world of high-end watches. Whether it's a vintage classic or a modern masterpiece, I'm eager to hear about the timepiece that speaks to you the most. Thank you for your dedication to preserving and enhancing the beauty of these remarkable watches, and I look forward to hearing more about your personal connection to this timeless world of horology. Warm regards, Noël Sazias

@earlelzy9975 7 ай бұрын

This is my first time on the channel and my mind is blown at how many tiny parts you took off and have to put back together. Amazing!

@joedunn7434 3 ай бұрын

The enthusiasm you have, it just makes the video. lol you’re excitement is contagious

@MarkGesswein 7 ай бұрын

Absolutely AMAZING work! I'm not a watch guy by any mean, but your attention to detail and obvious patience is inspiring. How much would you say it would cost someone to invest in all the equipment you use to do these restorations?

@AaronSchwarz42 7 ай бұрын

Thousands for the whole kit, oils, everything, like $1500 + bright lights, cameras, since having a video of the taking it apart the best reference for putting it back together, plus computers to edit the videos & all the skills & knowledge.

@MarkGesswein 7 ай бұрын

@@AaronSchwarz42 Thank you, sir! I just found another video Marshall did where he addresses the cost of starting into this field. Might have to start small and work my way up.

@scottcol23 7 ай бұрын

You sir, are a master! I love every video you make.

@joeaksa 7 ай бұрын

As usual, an excellent job Marshall!! Love the work you do!

@abrahamtrejo5184 3 ай бұрын

Thank you for the watch education... You do a good job in expanding and a good professor in your expertise.... thank you

@stevehogan8829 7 ай бұрын

Wow, what a story. I work for a computer security type of concern and the number of scammers out and about these days is staggering. I'm so happy that things have worked out like they have and I'm a subscriber that appreciates how you treat your followers. Thank you for being you.

@chrisherbert6664 7 ай бұрын

Unreal work as always Marshall 👏 gorgeous watch as you said but love your passion in getting her back to glory ❤fantastic

@TUTOMIA 6 ай бұрын

He did a beautiful job. I will always be grateful.

@MrDeeperASMR 7 ай бұрын

The patience to do this beautiful work is incredible!!!

@b0kkeee 7 ай бұрын

I really like the vibe you gave, talking about a watch meaning something to somebody. However, you missed the chance to coin the phrase "Not just repairing a watch that tells the time, but one that tells a story".

@goku519862 7 ай бұрын

Congratulations. You were mentioned by Adam Savage on his tested channel today.

@birdwatcher1337 7 ай бұрын

Amazing video as always Marshall. I am a software engineer and I have always wanted to get into watch making. Is there any chance you can do an updated video of all the tools you need to service a watch? The original one is great but the links link to amazon and a lot of the listings are no longer available. If not, that's fine too!

@friedgizzard 7 ай бұрын

I just found your channel and have watched about 20 videos. While I would go absolutely crazy working with the small parts I love to see the engineering and learning how these watches work. It helps that I have tons of respect for quality vintage engineering. You have a knack for editing a great video and make it extremely easy to watch and learn. Good Job.