Broken Dial, Barely Working Breguet Watch from 1859 Makes for a Daunting Restoration!

Рет қаралды 727,865

11 ай бұрын

Marshall gets to work on a watch made by Breguet, the company started by Abraham-Louis Breguet - considered by many to be the greatest watchmaker in history - in the years after his death. The owner of this watch traced its history back to his great-great-grandmother who last had it serviced by Breguet in 1866! With a broken dial and mostly in non-running condition, Marshall restores this beautiful vintage watch.
Support Wristwatch Revival via Patreon: / wristwatchrevival
Visit Sutcliffe Hansen for toolkits, revived watches, straps and more: sutcliffehansen.com/
Follow on Instagram for Project Updates in between video releases: @wristwatch_revival
------------------------------------
These are Amazon affiliate links to some of the equipment used for these videos and purchasing anything through them helps support the channel.
WATCHMAKING TOOLS AVAILABLE ON AMAZON:
Bergeon Screwdriver Set: amzn.to/34URcok
Dumont Tweezer #3: amzn.to/2YX4Hjl
Bergeon Springbar Tool: amzn.to/3LczDlJ
Bergeon Case Opening Ball: amzn.to/34VLbYg
Bergeon Presto Hand Removal Tool: amzn.to/3bfHtdo
Bergeon Movement Holder: amzn.to/3hQsY29
Horotec Hand Setting Tools: amzn.to/2Gdye1K
Rodico: amzn.to/32K0PDG
Bergeon Blower: amzn.to/34RgVxX
Bergeon Case Opening Knife: amzn.to/34VHr9e
Bergeon Quick Service Kit: amzn.to/2QHnScC
Ultrasonic Cleaning Machine: amzn.to/3i6BBER
Amscope Microscope: amzn.to/2EuReZ4
Multifunction Timegrapher: amzn.to/3Keceit
Sanding Sticks: amzn.to/3QFBcMg
CAMERAS AND AUDIO:
Main Camera, Sony A7III: amzn.to/2Dk3Q4K
Secondary Camera, Sony RX100: amzn.to/2Dlrwpx
Tertiary Camera, Sony A6400: amzn.to/3jVaYqh
Main Macro Lens, Sigma 70mm f/2.8: amzn.to/3lD4Wdb
Secondary Macro, Laowa 100mm f/2.8 amzn.to/2ZGmFKo
Camlink 4k Video Converter: amzn.to/3hTiiQf
Shure MV7 Microphone: amzn.to/3KaMlQC
Audio Recorder, ZOOM H6: amzn.to/31R11BQ
Small Sirui Tripod: amzn.to/3K82W7Y
Sirui Tripod Head for Overhead Camera: amzn.to/2QNoNZ8
COMPUTER STUFF:
Apple Macbook Pro: amzn.to/3k170fD
Synology NAS: amzn.to/3k5sZlx
Seagate HDDs for NAS: amzn.to/3hQ5hqt
Samsung Portable Drive: amzn.to/34UdhTT

Пікірлер: 1 300

@PJM273 11 ай бұрын

Proud to say this is my watch. Just wanted to say a huge thank you to Marshall for taking on this project. He is clearly passionate about his work; a craftsman/artist and a gentleman. As he mentions, sending this off to Breguet for a "proper" service/restoration was out of the question for me currently. So, I took a bit of a gamble as the alternative was leaving it not working, unloved or appreciated in a dusty drawer for another generation and that seemed a shame given what I knew about it so far. And boy am I glad I did. What a journey, and now watching the video last night with my partner I had to pause it at one point as I thought about my Dad, grand and great-grand mother - it was quite emotional. Proud and honored to be a part of this story but all I did was inherit a broken watch - Marshall, at least in my books, is the GOAT :) Keep up the great work!

@WristwatchRevival 10 ай бұрын

Aw that's awesome, I'm honored to have worked on the watch and very happy with how it came out! Enjoy it in good health!

@jenniferwhitewolf3784 10 ай бұрын

Wonderful!!! The best part is that many of us out here get to share in the experience with you.

@MorellioBenoir 10 ай бұрын

Thank you so much for sending it to Marshall and giving us all an opportunity to appreciate such a beautiful watch! I think Marshall just basically wrote the Chilton/Haynes manual for working on 1800s Breguets in front of us. :)

@vincebanzon756 10 ай бұрын

This is the continuation of a history.

@blackdragonxtra 10 ай бұрын

Can you say who the General who bought the watch was? I'm curious.

@rubenaerts2100 11 ай бұрын

I love how Marshall does his voiceover and still sounds genuinly surprised at whats happening. Very nice watch to work on, love the stories you manage to bring

@VisboerAnton 11 ай бұрын

Brother I have watched so many videos and didn't even realise it was a voice over until I read your comment

@setamakoto 11 ай бұрын

@@VisboerAnton me too but who cares tbh he sounds so genuine

@959_MC 11 ай бұрын

Voiceover kinda implies that it is recorded separately, (and your comment implies you think it is recorded separately) but you can clearly hear him moving along with what he is doing on screen (leaning, turning, bending over, etc.) (from what I can tell) He records an audio track from the dedicated microphone (and probably audio tracks from each camera for syncing, but only uses the dedicated audio in the end) and switches camera angles as needed. For angles not directly on the watch (such as the cleaning machine) he probably continues speaking and syncs the video with the voice as needed (kinda a voiceover of it's own, still mostly live)

@leftysheppey 11 ай бұрын

It's almost like commentary is his job 😂 Nah, he's excellent at this. Truly a talent

@Spott07 11 ай бұрын

@@959_MC I am certain that he is not recording his commentary live while he works on watches. There are a lot of time-consuming actions he takes that are not recorded (or are rejected in the final edit for quality or brevity, more probably) and his commentary is unbroken through the entire video. In some videos he has to take a break of weeks or months to acquire replacement parts. If he were recording his narration live, there would be a noticeable change in volume or tone or other characteristics when these cuts occur, especially the ones lasting weeks or months. Additionally, it would be impossible to plan and maintain such coherent commentary while also focusing on the watchmaking process without getting tongue-tied or starting off in a conversational topic that turns out to be based on a mistaken assumption. He is narrating the video during his editing process, and that is perfectly respectable. He does a great job. While he edits, he probably develops a script or at least an outline for the narration, and he is very conscious (better than most) of making sure he doesn't reveal information ahead of the point in the process that it is discovered. The reason that you can hear the sounds of his watchmaking activities, is that he's mixing the recording of the audio during the watchmaking process, with the audio of his narration, so you get to hear both.

@smokeandkippers 10 ай бұрын

My dad was rebuilding an engine for a Lotus Sprint and he was polishing the bolts that held the engine to the engine mounts and when I asked him why would he do that when nobody would ever see them he tapped the side of his head and said “Son, because if I don’t, I’ll see them every day.” I was ten years old at the time and he’s passed now but it was a great lesson on doing something to the best of your abilities and I’ll never forget it!

@JohnCarder 9 ай бұрын

My dad was the same; if the things you can't see aren't right, then it's not a proper job

@aizpaish 7 ай бұрын

@AndyfnB 6 ай бұрын

My dad had a vastly different answer, than again Taxidermy is an art not a trade. His answer was, and still is, "no one will ever notice that, but this someone will notice and those are the people I do this for." He's not wrong, we jokingly make fun of people who have these massive trophy bucks and their neighbors kid mounted them, but I also tell my buddies "if you shoot a deer that means soemthing to you, even if it's a spike 4, let me know it ain't cheap and spots fill up fast."

@wes11bravo Ай бұрын

While I am in no way proposing that I was as meticulous as your dad, I do thoroughly understand his perspective. In the 90s, I rebuilt a '64 Land Rover onto a new galvanized frame. I took care to wire wheel the rust and grease off of the steering box and axle cases, etc and paint everything because I knew it would bug me forever if I didn't!

@uxkwn4894 Ай бұрын

he had ocd

@nak4651 10 ай бұрын

To imagine that in 1859, there was technology available to make the smallest of screws, drills and taps, really almost microscopic stuff to make a watch of this design and calibre is mindboggling. Sometimes people forget what people were capable of, more than 150 years ago. Thanks for posting.

@VibeXplorer 7 ай бұрын

Agreed! How in the world did they machine those tiny screws back then without computer-aided design and manufacturing???

@d3vitron779 7 ай бұрын

@@VibeXplorerlots of math and machinery

@stopthephilosophicalzombie9017 7 ай бұрын

@@VibeXplorerThe industrial revolution really opened horizons for machinery both big and small. Metallurgy, precise measurements made with calipers/micrometers, statistical analysis for quality control, etc. These were all technologies that made this kind of watch possible.

@melody3741 6 ай бұрын

Also something to consider is that these were not necessarily precise, but with then-modern measurement techniques you could do things like testing gear meshing and adjust as necessary until things fit well

@beestingza 6 ай бұрын

@@melody3741 They were pretty precise. Harrison's sea clock H4, which was really just a big-ass pocket watch, managed to keep modern chronometer-grade time in 1759, almost 100 years prior to this watch.

@MpSkyfall 10 ай бұрын

I love this channel. Marshall is a restorer aware of his own abilities and limitations, and that humility makes him a very ethical man.

@berryj.greene7090 9 ай бұрын

Spot on - so it does.

@masattac 7 ай бұрын

I would trust him with ANY watch. Not because he's the best, but because if he doesn't feel comfortable working on it, he won't.

@melody3741 6 ай бұрын

The awareness of his abilities is a significant part - everyone has limitations, but a lot of people undersell themselves because they are told that knowing you are good at something makes you vain and a bad person (aka why the only socially acceptable response to “you are pretty/look good today” is “stop, no I don’t”)

@leftysheppey 11 ай бұрын

The thing which is amazing to me is that they kept the records from the 1850's. Over 160 years ago. Absolutely insane. And for the ancestor to personally reply is also such a lovely touch

@platedlizard 7 ай бұрын

They kept extensive records. They were able to build a copy of Berget’s masterpiece, a very complicated watch that was commissioned for Marie Antoinette by her lover, from his notes and sketches as well as photographs of it after it was stolen. (It has since been returned)

@yummygogolak 6 ай бұрын

Often times you discover that there are extensive records going back hundreds of years on the most unusual subjects, and quite often they are due to the taxman.

@roytofilovski9530 8 ай бұрын

Almost no one keeps time using a pocket watch in 2023. And one from 1859? Nobody. Therefore I would say you did an amazing job with this beauty.

@RedDadRedemption 11 ай бұрын

As a retired RAF engine tech your's is a refreshing engineering channel to 'watch' and relax to. You always have such a calm voiceover and watching you so excited to work on this Breguet and absolutely ace the project has been an awesome nerd out for me. Thank you for your efforts and your channel.

@DJ_Locks 11 ай бұрын

2023 Watchmaker: Can you believe they went through the trouble to blue this teeny tiny screw that nobody will ever see?! What craftsmanship! What dedication to detail! 1859 Watchmaker: Screw it, I'm just throwing all the screws into the oven.

@stevewilliams5428 11 ай бұрын

What oven?

@derpolcu 11 ай бұрын

@@stevewilliams5428 kitchen.

@stevewilliams5428 11 ай бұрын

@@derpolcu What type of oven???

@solarbirdyz 11 ай бұрын

Well, you're not wrong, because it's how you got corrosion resistance. Bluing wasn't - and still isn't, we still do it - cosmetic. (And getting it to black isn't actually "too much," it's great from a corrosion standpoint. But it doesn't have that lovely purple.)

@stevewilliams5428 11 ай бұрын

@@solarbirdyz A lot of modern 'bluing' is achieved using chemicals. I doubt even top watch manufacturers use the old heat methods.

@lindsayzelf3234 5 ай бұрын

Hey, Marshall - stumbled on your channel, after I had passed back into the family my father’s Rolex Oyster Perpetual. I bought it for him (with his money!) in Fiji in 1961. When he died, it came to me. I had it serviced and restored, but after I could no longer work (or afford to care for it properly) I sent it to my younger brother, for his children to inherit. (He had exactly the same watch. Put it in a bucket of water to keep it safe, while greasing a winch on a yacht en route to Fiji, from Auckland…and, yup. Emptied the bucket over the side, once he’d washed his hands!) I watched in utter fascination as you worked on an identical watch. Have been hooked on your channel ever since. The joy you evidence in working on these watches is contagious and uplifting and enriching. Thank you. I’m presently wearing a Fossil watch (quartz, but with a leather backing to the watch to prevent sweat and such-like infiltrating), but I remember loving keeping the old man’s watch running while he was ill, and then, after he died. They don’t make ‘em like him anymore. But the watch is still running !

@RoaldRoberts 2 ай бұрын

1859!!! I can't believe the manufacturing precision and how well the metals have held up. Truly astonishing. Fabulous work!

@TRISTRAMY 5 ай бұрын

I love the idea of the watchmaker putting so much effort into those screws and not knowing that they would be seen by over half a million people.

@frodriguezpc 11 ай бұрын

I have to confess this has been a stressful one to watch! At the beginning, as a fellow hobbyist watchmaker I was like “he should NOT be touching this”, but then you explained the story behind the watch falling in your hands, and I started to see you stopping at all the right red lights and being so respectful. In the end, you made the best of it! I still think this should be reserved to a proper professional watch restorer (who can work in balance and mainspring, and do good lathe work if needed, to make the most of the restoration), but at least you made it run and gave it a facelift. Congrats!

@marc7983 11 ай бұрын

I think he’s got a bit more talent than a hobbyist🙄

@frodriguezpc 11 ай бұрын

@@marc7983 You would be surprised of how much appreciation and respect I have for hobbyist watchmakers, because I know what it takes. He has referred to himself as a hobbyist many times before, and it is not my intention to despise his abilities, just the opposite, as you will see if you carefully read my comment. Again, it is a fact that a professional watchmaker is miles ahead in experience, knowledge, resources and equipment. This is not your usual eBay bargain watch, and Marshall fully realized and proceeded with respect, not going into what is beyond his capacity as a, well, hobbyist. My sincere kudos for that!

@docbp87 10 ай бұрын

This might be the coolest thing you have done yet Marshall. The story, the history... I've learned a TON about my watches, how they work, how to work on them, etc. from your videos, but this takes the cake for cool factor. Your viewer who owns this has a really special piece of history! Thanks for sharing an AWESOME piece with us, as always.

@kupariusa4202 11 ай бұрын

Hey, Marshall. I just wanted to let you know you inspired me to become a watchmaking hobbyist. I'm an Emergency Room Medic and a woodworker/luthier who is about to lose my woodshop for reasons, so I decided to work on watches to keep my sanity thanks to you. Bought a classic K&D staking set for a steal, a vintage cannon pinion puller for more than I should have paid, and various other Chinese and old tools based on your videos. What I am excited about is that I am making a custom watchmaking bench out of (free) wood that is designed for me. Arm rests and storage that fit me specifically. I'm starting with old Soviet watches (stolen movements from Western designs) just to cheaply get into the hobby. I want to thank you for getting me into this great hobby.

@berryj.greene7090 9 ай бұрын

Good luck.Its a great hobby and uses up your time in a measured way!

@WatchmakerCassidy 11 ай бұрын

Hi Marshall, I really enjoy relaxing and enjoying your videos. They make for some great entertainment. That being said, as a watchmaker I have a few pointers. I want to start with the most important one because of the provenance of this watch. You need to contact the owner and get the watch back and open that barrel. Putting a closed barrel through the cleaner like that will trap cleaning fluid inside and it WILL rust solid. That coder pin is a watch taper pin which are readily available, just make sure if you have to replace it that it's a brass one not steel or you risk damaging the watch. Next is when working on cylinder movements you need to always let the power down before removing the balance. They are constant friction escapement and the cylinder is ultra hand and very brittle and can break easily. My last thing is that cylinder escapements run at a lower amplitude so that is not something to worry about. Thanks again for the fun content

@benjaminepstein5856 10 ай бұрын

This. This guy fixes. Came here to say this about frictional rest escapements, like the cylinder and duplex.

@1300BlueStar 10 ай бұрын

I'm not a watchmaker but I did wonder about trapping fluids in the barrel, nice to have a pro confirm my concern. Wondering if over time the fluids leaking out would also damage other parts of the movement or am I overthinking this?

@EShirako 9 ай бұрын

Just *admiring* that enameled case is almost relaxing in its own right. That case is just gorgeous! And the detail in that case...wow. But that mechanism, too! The whole thing is just *elegant*-looking and I can't help but admire it.

@user-fs6hi1gg5f 11 ай бұрын

What a time piece! Never seen anything like that before. Stunning! Most of the parts & working principles of a modern watch are there, based on my very limited horological knowledge, very interesting. Well done for getting as far as you did, a lesson in knowing your limits and self control, thus preserving this most beautiful item for the owner & the future.

@berryj.greene7090 9 ай бұрын

Yes knowing your own limits - That's the phrase!

@occultustactical6138 Ай бұрын

The fact that they could machine this watch in 1859 is just mind blowing. The case was stunning. After it came out of the ultrasonic I was just in awe of the craftsmanship.

@josephrogers5337 9 ай бұрын

It is amazing that something almost 170 years old can be worked on and become operational. As far as mechanical engineering watches are the pinnacle of the lot

@terryrogers3458 11 ай бұрын

Good too see you back Marshall, that is one stunning watch,well done mate.

@heaven-is-real 10 ай бұрын

Yes, the gold case brightened up quite nicely.after cleaning. Amazing results.

@davidsneddon2242 10 ай бұрын

You can’t ignore history and Marshall you are now part of this incredible watches history for EVER. Excellent work and so sympathetic at the same time, fantastic sir.

@TheBrah808 Ай бұрын

I wonder if breguet will put him in the books after the great great great great grandma service? Another 150 years from now, people will wonder what is youtube and who this marshall is. Maybe a person of high status?

@r8dj 10 ай бұрын

was kinda worried about that enamel in that ultrasound but came through without a hitch....awesome piece of history

@justinchaves9712 7 ай бұрын

It still amazes me that watches made a century ago were made in such sophisticated manner.

@tonys9413 11 ай бұрын

The case for this watch is the most exquisite and beautiful; thanks for another great video. The decision not to take out the spring, with that cutter pin, is very wise.

@seederi 8 ай бұрын

Top level record keeping for the company, as someone already said that this might the coolest thing you've done so far i have to agree, i was almost hanging on to my seat watching this. Strangely enjoyable and exciting

@pilotstiles 7 ай бұрын

I still find it amazing people were able to create and design items this small especially screws and gears without the use of some kind of computer.

@MrFelix002 10 ай бұрын

wow its beautiful, and your work is astonishing

@JohnMckeown-dl2cl 11 ай бұрын

Magnificent watch that after 163 years still works so well. A real testament to the craftmanship. I must say that you are braver than me. The idea that this is such a rare and historical antique would paralise me. It would be like being asked to help conserve the Mona Lisa! Great job and another wonderful video.

@berryj.greene7090 9 ай бұрын

Paralyse is the word. I know that feeling. In fact its kinda why I'm here. Gotta take a break and make some considered decisions about how far I would go. Its OK to be wary!

@TheSupertecnology 10 ай бұрын

The voiceover is so remarkable. Even more so the skills to service such a timepiece. This is by far my favourite watchmaking channel on KZfaq, even if it doesn't have the fanciest tools or over-the-top restorations others do. Marshall ftw.

@Myrtilys 11 ай бұрын

My jaw dropped to the frickin' floor when you showed off the case post-cleaning...that's maybe the most beautifully decorated case I've ever seen, period.

@ronmerkus5941 9 күн бұрын

Man that's the most elegant basic watch , in how you read the Dial!

@my31and37 10 ай бұрын

I'm just amazed that in 1859, they had the ability to machine those tiny screws..

@vesnx 5 ай бұрын

screws are one thing, diameter and teeth of the gears and springs are a whole different level of difficulty. Just think 160 years ago they where able to mix up metals in such a way that they got the ratios and purity right to even make one.

@LEdHeadW 11 ай бұрын

Oh man what a fascinating look at such an old timepiece! Really cool to see and learn a little about the escape wheel and how a timegrapher doesn't work on it. Excellent restraint, thanks for bringing us along and sharing the story!

@Whiskeykind 10 ай бұрын

26:13 the reveal of the cleaned watch case is absolutely astonishing

@milfordcivic6755 7 ай бұрын

It's amazing that they could manufacture precision parts this tiny in 1859 and prior.

@briansehovski9854 11 ай бұрын

One of my favorite channels! Especially a watch like this. It is amazing that in the era it came from, the components were most likely hand made with such precise specifications. And only lose seconds on the day.

@davidcameron648 11 ай бұрын

The parts in watches of that era weren't all that precise and had to be hand adjusted to fit in the particular movement they were being assembled into. The parts would not be easily interchangeable with other movements of the same type. If any of the moving parts of that watch reeded to be replaced now, finding another of that movement would not help much. It wasn't until the late 19th century when the American watch makers introduced much more precise manufacturing methods, that you saw watch movements that had parts that could be easily interchanged with one another. It was one of the reasons we see a massive increase in watch ownership. It removed a ton of very expensive and time consuming specialized labor and allowed for a massive increase in production and a reduction in price to what an average person could afford.

@briansehovski9854 11 ай бұрын

@@davidcameron648 and on the note I am an advocate of right to repair…

@michaelbell9811 11 ай бұрын

That is the most beautiful watch you've done and it was masterfully serviced. Excellent.

@truthlesslouw 10 ай бұрын

1859 that's so crazy! You have balls of steel working on this one!

@jamesbarisitz4794 7 ай бұрын

No logo or script on the face is classy. Best watch back of 2023.

@EEE_MMM 11 ай бұрын

It must feel so amazing to be able to work on something with such an amazing history! Great video Marshall, keep up the good work 😊

@susantaylor5584 11 ай бұрын

Hi Marshall! Sue here to tell you that was awesome! Your attention to detail and the fact you go that extra mile is why you were asked to do this watch. I love watching you work. That and that you also do the narration and you have a great voice have made me a fan. Keep up the great work Marshall and I thank you! Till next time!

@_photonx6017 10 ай бұрын

Not being a watchmaker, after watching a few different servicings, they all started looking alike. This watch, though, really catches the eye, doesn't it? Well worth a viewing. Thanks!

@dragos-lucian 7 ай бұрын

1859... Jesus! I'm mind blown by what they could build in a time where there was no advanced technology to help them build such tiny parts for something so small. And yet, all those details are something we rarely see even nowadays. They loved making these pieces and attention to details is out of this world

@fepatton 11 ай бұрын

Breguet is my all-time favorite watchmaker (both the original and the current brand). What an amazing story this watch has! And now you’re a part of its story too. Well done. 😊

@covanentsbane 11 ай бұрын

You know, I'm an artist and have had a few opportunities to draw watches, and I've always enjoyed drawing the hands in this Breguet style, but I never knew any of the history behind it. This was a fascinating insight into something I had never considered the story behind. Thank you!

@JBH2989 10 ай бұрын

This watch looks like a quest item. Stunning!

@jlpjlp1953 10 ай бұрын

How many professional watchmakers today have never seen a watch of that age and quality? Lucky you...and us, too!

@CrimFerret 11 ай бұрын

What a beautiful watch. I knew what it was as soon as I saw the hands. It's so cool that somebody is giving you a chance to work on a watch of that caliber. It's got serious value even not running so backing out is always an option. Even in your voiceover I could hear how amazed you were to get to work on this one.

@F1fan007 11 ай бұрын

Wow!! Beautiful timepiece and fascinating to watch you disassemble, perform your magic and get it going again. Great back history too. Thank you Marshall!

@bluefeather56 10 ай бұрын

I love watching and listening to you on KZfaq. I get a chuckle out of you stating that if you like tools, this would be a good hobby. I have Band Instrument Repair tools along with Piano tuning tools. My mantra is: A girl can't have too much jewelry or too many tools.

@johnmathias8057 10 ай бұрын

Hi, my wife and I love your videos. Did you know that the bottom layer of your dial holder (under the 3-armed spiral) there's a membrane for safely holding the hands, etc. Keep up the great work! 🙂

@bumblebeebob 11 ай бұрын

What a beautiful, beautiful piece of art! Thank you for taking a chance on this wonder and historic time piece. And THANK YOU for taking us along.

@Bfg-yi2id 11 ай бұрын

I’m not even into watches but I can’t get enough of every video. Awesome work Marshall! I always learn something when I watch!

@slam854 10 ай бұрын

What an honor to be entrusted with such horological gem. Marshal, another job very well done. That is why YOU were selected.

@Element4ry 4 ай бұрын

It's almost unreal seeing how such old watch is made, especially when we look at modern tools.164 years is mind blowing. These watches were made to last, not only to count time but also conquer it.

@Alan_Edwards 10 ай бұрын

What I really like about these videos is the way Marshall creates an interesting unique story for each project. You can tell he has a real love and passion for this work and it comes across so well. It's a very meditative and calming experience especially for me or anyone else, who might deal with chronic anxiety. I look forward to each and every one. Thank you sir for sharing your talent and passion with us all. Well done once again !!

@stevehall6526 10 ай бұрын

What a beautiful piece of the watchmaking art. Absolutely stunning and the owner is a lucky person. Another excellent watch in both senses, well done Marshall 👍🏻

@sonnyshaw3962 10 ай бұрын

Extremely beautiful watch and Marshall is such a master craftsman to watch him do his magic on this 1850's Breguet pocket watch is quite enjoyable. I cannot wait to see what he works on next. I wish I could get him to work on an old 1940's possible early 1950's Gold plated Bulova open faced pocket watch that I received from an old friend. I can only hope one day to get it running again.

@buildingwithtrees2258 10 ай бұрын

My grandfather was a master watch maker. I'd often go to his bench and watch him work when I was a child. Thanks for keeping the trade alive!

@ControlPro 10 ай бұрын

Hi Marshall, Have viewed all your videos (am an amateur watchmaker myself) - this has got to be one your very best ones. The unknown is a scarry thing for sure. Well done mate! (BTW, you inspired me to purchase a lot of tools (as there is for everything in watchmaking - yep I found out) but succesfully managed to service my own 25 year old Rolex Sub). Nice :) Keep up the good work!

@WandererLife85 11 ай бұрын

When you can't sleep, but Marshall posts a video... (RUNS to computer)

@WristwatchRevival 11 ай бұрын

Hahah hope you get some sleep!

@rickchowsr2532 11 ай бұрын

Been waiting Marshall lol. Having my morning coffee @WristwatchRevival

@victormelgoza5665 11 ай бұрын

This is literally me right now 😂

@matthewh271 10 ай бұрын

@@WristwatchRevival Hi Mr. Marshall I don’t know how to get ahold of you other than this forum. I have a question would you be willing to service my SEIKO 4R36A all the local jewelers won’t touch it due to being an automatic I’m willing to pay and be patient

@lanesteele240 10 ай бұрын

This dude helps me sleep

@davidtimmermann7226 11 ай бұрын

I really like how he names the parts and explains the movements.

@user-qt4kt1rb1f 10 ай бұрын

You are a very brave, self-confident person if you have taken up the repair and restoration of such an old watch. Repair or restoration of watches that are 30-50-100 years old requires professional skills and experience in repairing watches. Repairs involving elements of restoration of watches older than 120-150 years are no longer possible without special knowledge and skills in the field of restoration of objects of a specific historical period (knowledge in the field of materials science, technology, culture and art of a certain period of history).

@davidbarrs9721 11 ай бұрын

Wow what a lovely watch i really hope you can sort it out !!!

@alaindrolet_atlt_2019 10 ай бұрын

What a rare one this Breguet, and it’s so fascinating to see you work on ! I recently service two old pocket watch and I can’t have decent reading on my timegrapher, so it’s was a little tricky to ajust and set the accuracy ! This Breguet is so beautiful after the ultrasonic bath and of course final results is stunning ! Congratulations Marshall, that another really interesting video ! Best regard from Canada ! 🙂

@davewarrender2056 10 ай бұрын

I LUV the dial. So simple and beautifully set out

@lavenhamphotographic 10 ай бұрын

1859! Blows my mind how anyone designs, let alone produces these things, even nowadays! Great Video Marshall!

@MonkTorius 11 ай бұрын

After forever long of being subbed, I'm still hella excited to see your videos pop up! Fantastic way to end my night. ❤❤❤❤❤

@dimanyc2004 10 ай бұрын

This is a museum-worthy timepiece. Breguet has made some extraordinary watches and to have an ability to work on one AND help service it, is an amazing achievement! I am surprised your hands were not shaking when you used your tools to "operate" on it! Excellent job, Marshall! And yes, I would love to know the name of the general who was the original owner of this watch!

@Tmanaz480 10 ай бұрын

Imagine a special occasion, wearing a 3-piece suit and you have that gorgeous watch and chain in your vest. What an icebreaker.

@ThePretender1 6 ай бұрын

Man, your videos are addictive! You show such a passion, share so much history and knowledge! Amazing content and amazing watch!

@unitedboss 11 ай бұрын

Marshall. (: Best news of the day. Thanks for the video. Big hugs from Berlin to Seattle. (:

@WristwatchRevival 11 ай бұрын

Danke!

@DecemberNames 11 ай бұрын

I just watched your video and I absolutely loved it! I found your presentation to be incredibly informative and engaging. You did a great job of breaking down complex concepts into easy-to-understand terms. I also appreciated the humor and personal anecdotes that you sprinkled throughout the video. It made the content more relatable and enjoyable. You're one of the few KZfaqrs who I can consistently count on to deliver high-quality content. Keep up the great work! "I outsourced this feedback to AI"

@Reatork 10 ай бұрын

@Wristwatch Revival I’ve enjoyed watching your videos and remind me of my grandfather telling me about his mechanical watch. I don’t know what happened to his watch but it was a Bulova. So I purchased a Bulova where I can see the mechanism from both front and back. Now I want more, the look and honestly I even enjoy the ticking sound..

@groffmarr 10 ай бұрын

I’m familiar with Marshall from his mtg work and found out this weekend that this is my father in law’s favorite channel

@andoletube 11 ай бұрын

I think you did a great job on this - but I am a little concerned about the mainspring. Are you not worried that the corrosion within the spring barrel might have been accelerated by washing it and trapping fluid inside it?

@davidariamirroarkyoung 8 ай бұрын

The greatest lapidarist I ever met and learned from are the German lapidarist families that cut gems for watch mechanisms. I have had the honor of learning from many top known lapidarist, but the knowledge and capabilities of these old families in Germany I met were so amazing, most likely the best lapidarist in the world.

@williamshaver5524 10 ай бұрын

I have used an old gunmakers trick of bluing screws by suspending them in melted salt Peter. Works beautifully. Perhaps watch makers used this as well. Timing is everything as salt Peter hardens back up if heated too much. Love your channel thank you.

@fosterkline4570 10 ай бұрын

This watch is one of the most beautiful works of art both inside and out

@kswaminathan5439 10 ай бұрын

Absolutely marvelous restoration of a super vintage watch.

@samakechijowo 9 ай бұрын

Funny story. Back on my University days in Melbourne, Australia, I bought a mechanical pocket watch in Victoria Market. The cheap souvenir variant. "Whoa, mechanical watch, neat!", Is what I thought at that time. And not long after that the watch no longer running and I put them somewhere. Then I finishedy study, went back to my home country for good, and forgotten about it until I found your channel a year ago. I am so fascinated now with mechanical watch I started looking for that pocket watch if I can get it repaired but I couldn't find it. I thought it was long lost or maybe left behind miles away until I found it this morning! In my closet in my new house! Apparently I brought them and put them there when I moved! Immediately go to my local watch repair shop and get it repaired! Oh I'm so excited!

@visiontrivia 11 ай бұрын

I like the dramatisation you add to your videos to make them more entertaining for us. Thank you so much!

@TheKrugermoose 10 ай бұрын

It's funny how not many people know that you are one of the best MTG commentators around! Awesome work man!

@heyheysaturday2492 10 ай бұрын

I'm really admiring the way you explaining while taking the watch apart. Such an easy learn history & be educated

@Joe___R 10 ай бұрын

A jewelry laser welder would be the best option for reattaching the dial feet.

@flemmingranch8882 10 ай бұрын

It's amazing how many tiney-tiny parts there are and even more amazing how you can keep track of all of them!

@michaelmerritt1722 10 ай бұрын

Gorgeous watch!! Thanks for the video!

@Xaunoki 10 ай бұрын

Marvelous job with restoring this watch!

@knottreel 7 ай бұрын

Brilliant work!

@johnmathias8057 10 ай бұрын

My wife and I love your videos, and we especially love how calming and upbeat your videos are. Your videos and voiceovers of you doing watch repairs have become the official replacement for Bob Ross doing his paintings on PBS back in the day. Thank you SO MUCH for your all of your effort and enthusiasm, it's greatly appreciated. 🙂

@rickfulton2353 8 ай бұрын

amazing history and great fun to watch

@tommylee4350 7 ай бұрын

This was incredible. Thanks.

@noddybray 9 ай бұрын

beautiful work.

@macncheese1991 11 ай бұрын

it truly amazes me when i see old world technology like this. the technological advances of today don't even compare to how some of this stuff was made and it was all done by hand, no machines involved. true artists