A simple a strong DIY Land Plane, Does it Work, I'm tired of wrecking my vehicles

No video

A simple a strong DIY Land Plane, Does it Work, I'm tired of wrecking my vehicles

Рет қаралды 17,221

Жыл бұрын

A simple a strong DIY Land Plane, Does it Work
#landplane
#offgrid406
#living off grid
#homesteading
My road is atrocious, and I am sick and tired of wrecking my vehicles driving up and down this hideous road. With the road grader project put on hold due to a lack of funds we needed something to knock down the ridges and fill in the ruts. I introduce you to the land plane.

Пікірлер: 22

@veggitarianredneck 5 ай бұрын

Catch me on my live every Sunday at 5:00 mountain time

@Azframer 4 ай бұрын

I think your chain needs to be connected to your I-beam 1- 1 1/2 foot back from the front so your rippers get more bite.

@oldoldpilgrim7898 5 ай бұрын

I like the way you expressed the part about not knowing "how many more of those this poor little thing (battery) can take." It's a sentiment I've had myself.

@barney992 3 ай бұрын

It needs to adjustable and grade over to one side then back again so mix gravel into the deep ruts . some adjust the wheel height and lift front so a blade goes one way and cuts out ruts or they come back again . good set up for light grading

@zardiw 17 күн бұрын

Either a longer chain, or a lower hookup........it's planing............Z

@MichaelSmith-kn4eu 4 ай бұрын

You can drag a piece of chain link fence behind it for super smooth

@veggitarianredneck 4 ай бұрын

True

@lightcapmath2777 Жыл бұрын

Nice...seams to work well. After your improvements all should hold strong. DVD:)

@RandomNEGuy 5 ай бұрын

thanks for the cool video.

@veggitarianredneck 5 ай бұрын

Your welcome

@WillieWeed 8 ай бұрын

02:30 get you one of those battery jump starters. The one's that start little cars are no bigger than a cigarette pack. The Hulkman 8.5 I have jump 8.5L gas, 6.0 Diesel , about twice as big about 150

@veggitarianredneck 8 ай бұрын

They're on my wish list believe me.

@todamnbad Жыл бұрын

Can probably go to your local heav6 equipment shop and get some used teeth to add to do your ripping, add some concreter parking vlocks on it ti add some weight

@veggitarianredneck Жыл бұрын

I was thinking the same thing. Definitely needs improvement, ie better rippers etc. I just don't know how much more weight I could ad though. It already weighs around a 1000 pounds.

@todamnbad Жыл бұрын

@OffGrid406 oh, doesn't look that heavy, maybe add some used teeth angled forward so that it digs in and pulls itself downwards into the dirt as you drag it

@ThunderDivine Жыл бұрын

Weld on some 45 degrees on the I beams and use a longer chain, so u dont pull the teeth up, with a lower angle they will rip more. and maybe add weight and drive slower.

@veggitarianredneck Жыл бұрын

Yep 45 degree angles on the beams would help cut on the edges

@SOUTHTHIRTY1 8 ай бұрын

Just move the chains bac 12in onto the I beams