A32nx Autopilot | Airbus Flight Control Unit

A32nx Autopilot | Airbus Flight Control Unit | How to

Рет қаралды 63,475

Күн бұрын

A32nx Autopilot.
In this Microsoft Flight Simulator video, we go through the Flight Control unit also known as the FCU in the FlyByWire A32nx, the FCU is what we use to interact with the autopilot in the aircraft. We discuss managed mode and selected mode and demonstrate how to use it.
Check out the ILS Tutorial:
• A32nx ILS Tutorial | F...
If you enjoy this video please give us a thumbs up and then subscribe here:
kzfaq.info...
Join this channel to get access to perks:
/ @realsimpilot
Social Media
TWITTER:
/ realsimpilot
INSTAGRAM:
/ flyrealsimpilot
#RealSimPilot #A32nx #MicrosoftFlightSimulator #FS2020 #airbus #A320neo #flybywire #autopilot #turorial

Пікірлер: 247

@paulchester656 2 жыл бұрын

One of the best, and easiest to follow tutorials I’ve seen for how to use auto pilot, and I’ve seen a lot. Thanks.

@mikejones9562 2 жыл бұрын

Beautiful landing. Agree with all the comments about the tutorials, I especially like RealSimPilot's explanation of "why" as well as just "how"

@tomasmenezes3683 Жыл бұрын

These tutorials really are amazing sir, came back to flight simming after leaving fsx and p3d a few years ago, they new fs 2020 is on another level, had to comeback and your tutorials have been really helpfull, straight to the point, not confusing and well put together, congrats! And thank you once more!

@birdman4274 2 жыл бұрын

One of the best PROFESSIONAL tutorials out there. Thanks.

@NR.2023 Жыл бұрын

As is with all your video tutorials this one is another one of the best out there on KZfaq. Not many come close to the way you teach us beginners. Clear and to the point. Keep up the good work. Very nice tutorials and excellent presentations. 😊👍🏻⭐⭐⭐⭐⭐

@ralphconnell8163 2 жыл бұрын

Brilliant. Relaxed presentation and landing.. not like the blind panic I have when trying to land! You make this so understandable.

@noob.168 Жыл бұрын

i personally find landing while upside down to be relaxing.

@johnpeters5906 2 жыл бұрын

Thank you, its all so clearly to understand,. I have seen now them all, and can hardly wait for the next “ How To “ 👍👍👍

@davida3940 2 жыл бұрын

Very good and simple to understand tutorials. Thank you!

@KornRussianFan Жыл бұрын

Thank you so much! Autopilot become completely clear after being complete confusion.

@littlenemo14 Жыл бұрын

What a brilliant video this was. So many questions answered for me. This definitely earns a sub.

@Ben-hz7cp Жыл бұрын

gay

@davidjones969 2 ай бұрын

Brilliant tutorial which answered a lot of my questions as a novice and gave me the confidence to continue my efforts to fly the FBW A32nx👌👌😀

@yams900 2 жыл бұрын

Good work maaaate ! Perfect, just the things I wanted to learn. I'm quite new to this aircraft. Thx for sharing

@davewhite3508 2 жыл бұрын

Excellent just what I needed, many thanks!

@kevinhendon 2 жыл бұрын

Brilliant tutorial, thank you for that.............much clearer than others 👍👍

@Sy-T007 2 жыл бұрын

Oh wow, well done flybywire. This is now very flyable

@ashGT40 11 ай бұрын

thank you for the video learned so much !

@scottishrebels Жыл бұрын

Informative, detailed and very helpful. Thank you. Liked and subscribed.

@gregorydayton5428 Жыл бұрын

Great video! I learned a lot. Thank You.

@ronaldjeffers2415 2 жыл бұрын

Thank you so much for this wonderful educational program I always wanted to be a pilot you are a magnificent instructor and I thank you

@jacobe5495 6 ай бұрын

Love it 🔥

@petemitchell9996 5 ай бұрын

Holy crap this was a great tutorial. Tnx

@bergsteiger3000 2 жыл бұрын

Excellent!! - Thanks

@hevm2220 4 ай бұрын

THANKS YOUBSOOO MUCHHH😊❤

@11zaku11zan 2 жыл бұрын

Honestly your videos are the best for A32nx. They are simple yet informative and detailed for the beginner sim pilot. You do indeed follow the title in your videos because you share your knowledge of aviation. Just one question. Which version is better to have installed DEV or EXP? Many thumps UP. Congrats!!!!👍👍👍

@RealSimPilot 2 жыл бұрын

Thank you. I usually stick to the experimental version.

@JRSideProject 2 жыл бұрын

Thanks for such a very informative video! Seeing this as well as a few others, I was just wondering if a steep climb rate is normal in the A320neo at low altitudes. In managed mode the climb rate seems to be quite high (3000-4000 fpm?)

@AloysiusDicodemus 2 жыл бұрын

finally i know where part on the knob to press to switch between managed and selected mode... been looking for this because in FSX, i usually use left-click to managed mode and right-click to selected mode... 🤣🤣

@chrispurkiss1491 Жыл бұрын

Just come across the tutorial and will be studying it closely as I think from the comments it will help me enormously. One question if I may. If I create a flight plan in Little NavMap and load it into the aircraft will the autopilot adjust for any altitude changes during the flight or is it necessary to follow ATC instructions manually?

@marcw.5492 2 жыл бұрын

Yes I did that - TAHNKS !

@beyondc4476 2 жыл бұрын

wow amazing

@pm110978 2 жыл бұрын

Very good video boss 👍

@jerjeremyho 28 күн бұрын

may i ask at 17:15, how does the airplane know what speed should it fly at during final approach? is it the Vref value from the MCDU, and the computer can extract that automatically?

@kdeneve Жыл бұрын

Hello Brandon. Thanks for this great tutorial. I am a bit confused about the difference between managed an selected altitude. I learned managed is following whats in the MCDU and selected is what the pilot types in. But actually in the tutorial you are manual selecting a new altitude and then always use the managed mode ... This is confusing me. Why not selected mode here? Can you or someone else can explain this please a little bit more in detail? Thanks

@90GradeHead Жыл бұрын

now I know how to work with the Autopilot thx

@user-kr5hv3nx2y 5 күн бұрын

Is the process of getting the G/S the same with IniBuilds? Anyway, is it okay even you did not initiate the Active Approach in the FMC? Just push the APP on the front?

@Jajo0139 4 ай бұрын

why does my autopilot change course when I have everything marked fine, it happens in the middle of the route and during the approach when it has to turn harder

@chrispurkiss1491 9 ай бұрын

HI, dumb question but what is the flight plan you have loaded can't see anywhere that says where the flight is starting from? Would like to create the same flight for myself and follow the video.

@joaorocha5499 6 ай бұрын

hi there my autopilot works great but when it reaches at descend point it doesnt descends to the correct altitude e continues to go in the same altitude untill the arrive airport can you help me ?

@m.mal-hamad7955 2 жыл бұрын

Nice landing captain

@ronloveflying 5 ай бұрын

Why atc keeps giving you the QNH after the transition altitude. You can't set it while in STD ?

@qfan8852 Жыл бұрын

How can I bind these push/pull knob actions to joystick/controller buttons? MSFS doesn't list them like "Pull xxx knob".

@Willemguitar 4 күн бұрын

How do I know what ALT to fly on the different waypoints ? I import from simbrief but not all routes have a FL I fly from EGKK to EHRD using latest AIRAC EGKK/26L BOGN1X BOGNA DCT FRANE DCT CLN DCT REDFA REDF3R EHRD/MASOS.I06

@davidvadney742 2 жыл бұрын

How do I make the plane follow the altitude constraints on the flight plan?

@msfs_simer125 2 жыл бұрын

i can only twist the buttons not all that push pull and my ap never works with the a32nx

@donkeystains7739 2 ай бұрын

Finally I don't have to rev the engines of my aeroplane to maintain a somewhat consistent speed......thanks 🙏

@goziennaka1524 2 жыл бұрын

Bro please what type of system and Microsoft flight edition 2020 are u using it looks realistic.. I got the standard version of Microsoft flight simulator and mine dont look like yours lol

@ashishpatil122 2 жыл бұрын

Thanks

@Lemjj Ай бұрын

I dont know why but my Fenix a32nx autopilot is not following the selected heading. Please help.

@yams900 2 жыл бұрын

Good stuff ! Nice playing with AP, just what I need to do as well. Approach speed, set in MCDU as well ?

@RealSimPilot 2 жыл бұрын

Yes if you fill out the approach page in the mcdu perf it will calculate approach speed

@marcw.5492 8 ай бұрын

I cant seem to find the HEADING Synch "button" is there one ?? Was sure it was PUSH Heading knob... hmmm I have to start on runway - cua I cannot start the engines manually... oh well!

@a1vom_vr3kit Жыл бұрын

for some reason i have my legacy setting on and i cant seen to get my spd to go into maaged mode please help thanks :)

@ACTwinners Ай бұрын

For me it says nav tcas standby then autopilot stops working can you help?

@Pickers19725 2 жыл бұрын

How come when i press auto pilot button the green light does not come on?

@PILOTCPP 7 ай бұрын

Sir my Msfs 2020 Brief mess messages not showing on Engine and warning screen how to solved issue

@Strangerpengui 2 ай бұрын

I'm sorry but I don't get this autopilot thing it keeps chaning my V/S in to the negatives but tower gave me clearance to climb to FL200 but it's not climing to FL200 instead it only goes up to FL080 then levels out. Edit: I'm a little dumb I did not know you have to click to confirm it.

@jordolution3212 Жыл бұрын

if the altitude is in managed mode will the aircraft follow the altitude restrictions

@agustinh4781 Жыл бұрын

How do I pull or push in the heading boton

@vasiliosgrekousis8192 Жыл бұрын

The VC modeling though, looks quite off, right?

@Exsing 2 жыл бұрын

Great video! But what is the difference between activating approach from the MCDU vs activating it on the FCU by pressing the button?

@Ed_Aviation 5 ай бұрын

You activate the approach, on the before final approach.. and activate approach phase when on final.

@LongHaulPilot Жыл бұрын

Hi mate great tutorial. If I leave it on managed mode will it essentially be comparitable to VNAV and LNAV on a Boeing 737 (I’m coming from XPlane so it’s weird having the plane do this for me)

@RealSimPilot Жыл бұрын

Correct.

@trisusilo766 2 жыл бұрын

good tutoria what mod FBW that you used, cause since update sim6 msfs my autopilot not working and alt still on 5000ft not in accordance with the alt from atc

@RealSimPilot 2 жыл бұрын

It's the experimental version. You need to update whichever version you are using with the flybywire installer. It's been updated after sim update 6.

@IrishMonke-GT 6 ай бұрын

After I take off the plane switches to track and won’t follow the flight plan, I can’t find a single tutorial for this

@railtransportvlogsnsw7775 2 жыл бұрын

Great tutorial! Just one question, how did you know to slow down to 220 when you imputed the ils?

@sysymama7472 2 жыл бұрын

Hi. I'm not professional just a simmer but one day a controller on IVAO advised to all present pilots to slowdown our speed around 210 kt approching the final in order to intercept easily the ils localizer. Btw, in my opinion is good to slowdown at least at 220 knots before your last turn for final in order to start the opening of your flaps easily. At 250 knots the warning will quickly inform you that your speed is too high to open flaps

@Ben-hz7cp Жыл бұрын

inputted*

@zeph3004 2 жыл бұрын

Could you make a tutorial where you have to change STAR and arrival runway mid flight in the MCDU? Seems buggy for me in the A32NX and not sure if i'm doing it correctly

@Fromatic 2 жыл бұрын

Yes, would like this also, tried doing it just to have a go and it got into a right mess with the AP completely ignoring the flight plan, don't know if I was just doing it wrong or if it doesn't work

@RealSimPilot 2 жыл бұрын

Will have a look at it. It can be a bit temperamental at times. Last night I was flying on Vatsim and when I inserted the STAR the plane turned around and started heading back to the departure airport.. the experimental version seems a bit better at managing the flight plan.

@mikejones9562 2 жыл бұрын

@@RealSimPilot Thanks and will watch out for it

@DudeOnADualMotor 9 ай бұрын

Wondering if anyone can help me, when I select altitude etc, I don't get a little up and down arrow above and below the dial, what does this mean? Do I just select heading altitude etc and it will do it automatically?

@RealSimPilot 9 ай бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy.... that will give you the arrows

@joaorocha5499 6 ай бұрын

and a proper altitude needs to be followed and it doesnt follow the correct altitude and in the top descend i want to the a320 descends automatically and it doesnt

@aldoquatela6853 Жыл бұрын

Ciao, io con l Airbus A320 nx non riesco a volare, mi dice di disattivare tutte le funzioni assistite, perché?

@alexrox321 2 жыл бұрын

great video, can't thank you enough for making these vids! How come you don't have to enable the localiser upon approach? I thought that was what communicates with the ILS system on the ground to ensure you follow the glideslope?

@RealSimPilot 2 жыл бұрын

I did so at 16:13. Pressed the approach button on the FCU

@alexrox321 2 жыл бұрын

@@RealSimPilot Thank you for such a prompt response :) You pressed the App button but i thought the Loc button under the heading dial was needed? What's the difference?

@RealSimPilot 2 жыл бұрын

@@alexrox321 loc is for localizer only. If you're doing an ILS you have a localizer and glideslope. APPR arms both loc and g/s

@alexrox321 2 жыл бұрын

@@RealSimPilot Thank you so much for taking the time to explain that for me, i really appreciate it.

@londonroadrunner 2 жыл бұрын

Hi. I don't have the option of my mouse turning to an up arrow or down arrow to switch between the two modes when moving across the altitude selector. Likewise I can't pull the baro knob to get STD. Is there a setting I need to correct in order for this to work?

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to 'legacy'

@londonroadrunner 2 жыл бұрын

@@RealSimPilot Perfect. Thanks for that. Makes life a lot easier....

@DAILYDougee 2 жыл бұрын

I had the same problem I knew I could count on you guys for an answer. Nice work on the tutorial

@lukajokanovic6131 2 жыл бұрын

hello, i am trying to change altitute but the plane doesnt climb, and the same with the speed and with the hdg, i press the button but it just doesnt change. And yes i have the auto pilot on .

@RealSimPilot 2 жыл бұрын

Autopilot must be in selected mode if you changing it manually ( no dot next to the altitude or speed or heading display) hold your mouse cursor over yhe bottom of the button until you see the down arrow. Click it to use selected mode.

@marcw.5492 2 жыл бұрын

I decided to download the Development A320 nx . . . But in the last month or so the FCU (top panel) seems to have many issues, are you seeing those recently ? No sounds - No push Pull feature - No VS options ?

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@L4ptopgirl 2 жыл бұрын

@@RealSimPilot this solved all my problems

@budguy21 2 жыл бұрын

You keep saying PUSH for Selected, but it's push for managed, PULL for selected.

@agustinh4781 Жыл бұрын

How do I pull o push

@budguy21 Жыл бұрын

@@agustinh4781 click on the top or bottom of the button. You should see an Up or Down arrow when you hover your mouse.

@elparceroxd791 7 ай бұрын

It doesn't appears anything

@guidoferri8683 6 ай бұрын

You have to set general options -> accessibility -> cockpit interaction system to legacy

@marclocity4207 3 ай бұрын

@@guidoferri8683best comment and most helpful 🤣 thanks bud!

@danielteodorof7166 2 жыл бұрын

Everytime I go on autopilot it never goes towards my heading or follow the navigation route. Any idea how to fix this?

@sw5182 2 жыл бұрын

reinstall the a32x

@swiss_avgeek4247 2 жыл бұрын

My autopilot doesn’t work when I click on it it starts turning in circles what should I do?

@pascalbangratz2772 2 жыл бұрын

Thank very much for this tuto. Very interesting. Why does my autopilot disconnect regularly during the flight as I don't touch anything ? So I have to be by my computer permanently to press again on the AP button. Should it not stay connected until I disconnect it at landing ? Thank you for your counsel. Pascal

@RealSimPilot 2 жыл бұрын

The usual culprit is key bindings. People bind keys to wing views and stuff that are also bound to control inputs like rudder for example.. but you mentioned you didn't touch anything so my next guess would be A.FLOOR next time it happens check in the top left corner of the PFD if it says A.FLOOR It's a protection system for the airbus.

@pascalbangratz2772 2 жыл бұрын

@@RealSimPilot Thank you for your answer. Yes A.FLOOR indication often happens. What should I do in this case ?

@RealSimPilot 2 жыл бұрын

A.floor is a protection system preventing your aircraft from stalling. Means you getting too slow. If this is happening during cruise something is slowing your aircraft to a unsafe speed. Could be weather updating incorrectly or something.

@pascalbangratz2772 2 жыл бұрын

@@RealSimPilot Thank you very much. I will be very careful during my next flight.

@pascalbangratz2772 2 жыл бұрын

Dear friends, I was very carefull during a flight between Reykjavik and Dublin : no A.FLOOR, no any touch on any button, nevertheless the Autopilot disconnected 3 times. I don't understand why.

@PeteV80 2 жыл бұрын

This is great. Any idea why vnav isn't implemented yet? I don't understand how they can have all of this functional but not vnav

@RealSimPilot 2 жыл бұрын

They still working on it.

@pablo9364 2 жыл бұрын

Is VNav setting altitudes for various legs of the flight plan in managed mode ?

@RealSimPilot 2 жыл бұрын

@@pablo9364 pretty much. With vertical navigation you will be able to descend in managed mode and be at certain altitudes at certain waypoints calculated in the mcdu. It will also give you a top of descent point

@pablo9364 2 жыл бұрын

@@RealSimPilot oh thanks for confirming that. Well it will be very good when it’s implemented . I was wondering why it wasn’t reacting to what I input in the mcdu. Great helpful video anyway

@rafaelyorro4466 Жыл бұрын

Autoland only for landing?you must depress aland button to land manually?

@RealSimPilot Жыл бұрын

You mean autopilot? You need to disconnect the autopilot before landing unless you have configured the aircraft for autoland

@jjsemperfi 7 ай бұрын

So those arrows don’t appear when I hover over the buttons. I’m having a hard time with managed vs selected. Seems like a right click activated it sometimes but not other times. I’m on PC.

@RealSimPilot 7 ай бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@jjsemperfi 7 ай бұрын

@@RealSimPilot thanks for the quick reply. I’ve been enjoying this plane immensely so far. I asked this on Reddit but maybe you’d know. Do you think there is a way to map the autopilot knob “push pull” to a clickable button on a HOTAS? I have the WinWing Orion 2 and I have 3 rotatable and clickable buttons in a row that I use for AS, Heading and ALT. I’d love to be able to click them to toggle managed vs selected modes though.

@RealSimPilot 7 ай бұрын

I haven't been able to figure that out

@hamlet2kk Жыл бұрын

Like # 1k :)

@danielwilliams6600 Жыл бұрын

hey any reason why im not getting the up and down arrows to push and/or pull the nobs on the fcu?

@RealSimPilot Жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@danielwilliams6600 Жыл бұрын

@@RealSimPilot thank you

@N1ckZ 11 ай бұрын

Ah that's what I was looking for

@mementomori6534 2 жыл бұрын

Pretty easy tutorial, followed every step, but for me the AP is still not working since when I turn it on it says Tcas standby, then a noise starts ringing in the cockpit until I press the master caution button. What am I doing wrong for this to happen? I hope you can help me :)

@RealSimPilot 2 жыл бұрын

Did you set up the mcdu? Autopilot will not work without all the entries into the mcdu. Even when using selected modes

@mementomori6534 2 жыл бұрын

@@RealSimPilot ooh, right. I realized there were discontinuities in the fpln and that I also forgot to fill the perf part of the mcdu. It’s working now. Thanks

@Caramellino11 2 жыл бұрын

Alright. So far so good. ... But, what if you start from the Runway, the altitude is 1500 feet or above, you push the Autopilot Button 1 and nothing happens. The AP is not engaged, you can push the AP-Button once again, two times, three time ... but still nothing. The same for the Tablet. Impossible to load the Flightplan from SimBrief. If you push the green Button on the Tablet for loading the Flightplan from SimBrief, simply nothing happens ....

@lime5851 2 жыл бұрын

Same

@elton245ify 4 ай бұрын

I don't have the push or pull for this. My mouse couser is a hand, and it doesn't do any push or pull?? Can anyone help me with thos??

@RealSimPilot 4 ай бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@matteomarzocchi609 2 жыл бұрын

I don't have with these version the command to pull the autopilot rowel of the speed, hdg, altitude etc. Practically I can't manage these things by myself can someone help me?

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@matteomarzocchi609 2 жыл бұрын

@@RealSimPilot solved, thx a lot

@alkki 2 жыл бұрын

My mouse doesnt show me the curved arrow to turn the knobs all i get is a hand cursor what do i have to change? thanks!

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@alkki 2 жыл бұрын

@@RealSimPilot thank you!

@jacob7255 4 ай бұрын

How do you control the speed because that confuses me when I fly?

@jacob7255 4 ай бұрын

It also goes straight to 320 knots even when I change the selected speed

@aldoquatela6853 Жыл бұрын

I can't fly with the Airbus A320Nx, with the autopilot, before starting the flight, a message appears, A320nx, ALERT, ENSURE YOU HAVE TURNED Off ALL Assistance functions

@RobertWen-wb998 2 жыл бұрын

Why my a320nx buttons can’t switch to manage mode or select mode? There is no arrow?

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@RobertWen-wb998 2 жыл бұрын

I've found myself, switch to the legacy mode is OK.

@Rick.Astley1987 Жыл бұрын

Hey! First of all very nice video!!!❤ But I have a problem. My autopilot doesn‘t follow the route. He just flies in a straight line after takeoff. But I don‘t know why. Could you help me?

@RealSimPilot Жыл бұрын

Is it set to managed mode?

@Rick.Astley1987 Жыл бұрын

@@RealSimPilot yes it is

@harrysmith1986 2 жыл бұрын

G'day, on the ground I'm unable to select managed mode. Any idea what I'm doing wrong?

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@harrysmith1986 2 жыл бұрын

@@RealSimPilot ok thanks just checked and already set as legacy. I'll keep trying to figure out. Cheers

@wojciech35 2 жыл бұрын

I Have a problem I do not Have arrows when i want to change speed mode. Help Please :/

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@jl6017 2 жыл бұрын

For some reason mine doesn’t give me the option to click the knobs so it always stays in manage mode. Is there something I could do to fix this?

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@jl6017 2 жыл бұрын

@@RealSimPilot thank you so much!!!

@Josh-lq3jh 2 жыл бұрын

Should VOR switches be on while using autopilot?

@RealSimPilot 2 жыл бұрын

No it's not required

@Josh-lq3jh 2 жыл бұрын

@@RealSimPilot thanks, what should vor switches be used for then?

@RealSimPilot 2 жыл бұрын

@@Josh-lq3jh they display the direction to the vor or adf you programme in the radnav page in the mcdu

@omarrolle7950 2 жыл бұрын

I can't get altitude to activate up and down am I doing something wrong ? :(

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@davidbrewster9743 Жыл бұрын

A the beginning (1:55) you say push is managed and pull is selected mode, but I think you made a mistake at the 11:05 mark where you say the opposite (push selected).

@RealSimPilot Жыл бұрын

Push for managed. Pull the knob out for selected, enables you to turn the dials for selecting speeds, headings and altitudes. Sorry about that.

@pix345 Жыл бұрын

i cant figure out how to make my plane level itself off.

@JJ-pj2kz 2 жыл бұрын

I don't get the up and down arrows for managed and selected modes. They just don't appear. Any help?

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@JJ-pj2kz 2 жыл бұрын

@@RealSimPilot thank you!

@JJ-pj2kz 2 жыл бұрын

@@RealSimPilot can you do a video on how to use atc for an ifr using the fbw a32x without flight planning in the main menu

@RealSimPilot 2 жыл бұрын

@@JJ-pj2kz not sure if that's possible. You can try after setting up your flight plan in the mcdu, see of there's an option to request IFR clearance from the ATC menu.

@mcduffrobert 2 жыл бұрын

When you say “set TOGA” and then I see the auto throttle go on… is there a physical button that I push??

@RealSimPilot 2 жыл бұрын

No, you just set the throttles fully forward to the TOGA detent.

@mcduffrobert 2 жыл бұрын

@@RealSimPilot ok, I see, but do I put the auto thrust button on, or will potting throttle in TOGO detent do that?

@RealSimPilot 2 жыл бұрын

@@mcduffrobert it will come on

@mcduffrobert 2 жыл бұрын

@@RealSimPilot thanks so much, you videos are teaching to fly the FBW 320👍

@Turbojets_Channel 2 жыл бұрын

My A32NX doesnt let me push pull a fkn thing. WHen I hover over the knobs, it just turns blue and only lets me turn it. Cant push or pull.

@RealSimPilot 2 жыл бұрын

In MSFS go to general options-accessibility-cockpit interaction system- set it to Legacy.

@lefteyegaming1173 2 жыл бұрын

@@RealSimPilot thank you so much sir .

@narejos2007 2 жыл бұрын

Utilizas la versión Stable o no?

@RealSimPilot 2 жыл бұрын

Yes this is the stable version.

@judassson 2 жыл бұрын

does anyone else have this problem with FCU where you cannot push or pull the management switches? I am unable to switch between managed and selected modes with fbw a32nx (development version, updated today) I would be so happy to figure out the problem

@RealSimPilot 2 жыл бұрын

Go to general options-accessibility-cockpit interaction system-set it to legacy

@judassson 2 жыл бұрын

@@RealSimPilot Thanks a million... Finally figured it out :D

@harrysmith1986 2 жыл бұрын

@@judassson what was the issue?? I'm haveing similar.

@judassson 2 жыл бұрын

@@harrysmith1986 My settings for the controls was set to Legacy, as Real Sim Pilot said. I have a gaming mouse with additional buttons, so I set those buttons for pulling or pushing the FCU knobs. You can try it if you want.

@harrysmith1986 2 жыл бұрын

Thanks all, sorted was related to the mpcdu