A45 / CLA45 Loosing Boost | Fault Code P0299

A45 / CLA45 Loosing Boost | Fault Code P0299 | FIX

Рет қаралды 18,312

Жыл бұрын

A45 , CLA45 M133 Engine loosing boost.
Fault code P0299 stored, issue found to be the turbo wastegate rod worn. Watch the video to see the fault and what we did to fix the fault.
Hope it helps some of you out if experiencing the same, please give the video a like and don’t forget to subscribe!
#amg #a45 #cla45

Пікірлер: 37

@KirillSapelkin. Жыл бұрын

Very informative and correct. This is a common fault which I've just had to deal with on mine. Will be doing the same repair via midland turbo.

@Twenty4Karrat Жыл бұрын

Excellent

@ivanjenkins5900 Жыл бұрын

Thank you!!!!!!

@oIOSh0rtyOIo 11 ай бұрын

FYI just contacted midland turbo and asked what they charge to fit the part as I purchased it myself like they have in the video. they told me they do not offer the service even when I linked the video in my email explaining what I needed doing……

@godfreysautomotiveservices 11 ай бұрын

Hi, sorry to hear that. We sent them this one and the part with no problems.

@capspampulha8433 9 күн бұрын

Se ligar e desligar o problema some? Meu carro deu esse cod troquei a aste mas o problema continua.

@atam1056 Жыл бұрын

how many miles had this car done? anyway to prevent this from happening or reduce wear?

@MT-vf4lb Жыл бұрын

Can anyone tell me...when the wastegate is open, should there be any play in the rod and the linkage from the actuator to the turbo housing?

@c43sedan 5 күн бұрын

How do we adjust the rods

@saintpurpp957 4 ай бұрын

Where do I apply pressure from?

@kevinlopez5632 Жыл бұрын

Where can I get the wastegate

@thecomputertech Жыл бұрын

Would you expect to have no boost / very little boost all the time if this was failing ? On my A45 at times particular at higher speeds I’ll be accelerating and it feels like all of a sudden the boost dies off - doesn’t happen all the time and if I turn the car off and back on everything is good again and can remain like that for the rest of the drive. If not likely to be this issue, do you know what the problem could be ?

@godfreysautomotiveservices Жыл бұрын

Our customer was experiencing the same issue. Very intermittent and when ignition cycled vehicle was ok again. This fixed his issue 👍

@thecomputertech Жыл бұрын

Thanks for the reply back - I don’t get any lights on the dash when it happens .. would something be logged if I were to get it plugged in ? How much am I looking for this repair ? Can I do any checks to confirm it is that issue ? Thanks again for the replt.

@the_lgnd_stargaming9205 Жыл бұрын

Hey man were you able to fix that problem? I have a mercedes c450 amg and its literally doing the same exact thing like yours and aswell i have to turn off the car then turn it back to in order for it to run back to normal

@the_lgnd_stargaming9205 Жыл бұрын

Im trying to get this fixed so bad its really anoying i even took it to the mercedes dealership to get it checked nd they couldn’t find the problem😢

@wxkedbruh 3 ай бұрын

did anyone find out if this fixed it? I'm also having this issue with my c43 amg

@waqasanwer5702 Жыл бұрын

I changed my turbo and still getting the same under boost code. What else should I check? They also ran pressure tests as well.

@godfreysautomotiveservices Жыл бұрын

Check the vacuum system 👍

@maxfisher8543 11 ай бұрын

Did you ever fix it?

@waqasanwer5702 11 ай бұрын

Yes I ended up wasting money because of a misdagnostics from one of the mechanic. I got a second opinion from a Mercedes master tech and was able to identify the boost sensor out. Once we changed that it was back to normal. My turbo never messed up and all these posts lead me to believe it was my turbo wastegate. Hope that helps. Lmk if you need help with anything else. If you are in Texas I can tell you who checked it out

@maxfisher8543 11 ай бұрын

Thank you, that’s very helpful. I have also changed my turbo and still getting the same problem. Do you know the part number or the exact sensor you changed. Thanks

@RsBahamasBoy1 11 ай бұрын

@@waqasanwer5702how much was the sensor for you ? Going through it now

@PingDrv00 3 ай бұрын

Why did you not show actually replacing the wastegate on the video? Is this something that can be done. Also, you did use the Mamba part correct?

@godfreysautomotiveservices 3 ай бұрын

Because we didn’t replace the wastegate, we sent it to midland turbos to carry out as it says in the video 👍

@PingDrv00 3 ай бұрын

@@godfreysautomotiveservices I got you. Appreciate the response was hoping it was something that you did to increase performance of the turbo not just the waste gate. Great info though and appreciate the response!