1.5 hour stucco patch where window was

Рет қаралды 17,041

Жыл бұрын

Welcome back everyone. Oh today was a gorgeous day in the Valley. This home backs up to an open space with a 50 year moratorium to undeveloped land behind this beautifully remodeled 3/2 1800 Square foot home. Before we get going you should know that we add acrylic bonder to our mixes for better adhesion of the new stucco yo existing stucco. Listen to Jr and I repair the stucco on the side of this home overlooking the beautiful rolling hills and raw valley floor of Pleasants Valley Vacaville California.
Today we are attempting to complete a 30 square foot stucco patch left over from the general contractor as he removed a large window and built cabinets on the inside walls of the home. Learn interesting tips, I'm always looking for the next job down the street and Im interested in the satisfaction of the client

Пікірлер: 55

@hollywinsman9464 3 ай бұрын

Ken, your work is outstanding. You are a master.

@AbersonPlastering 3 ай бұрын

Thank you Hollywinsman 9464

@hectorsalinas3058 Жыл бұрын

You are one of the best trawel skills in the trade. easy and elegant.

@AbersonPlastering Жыл бұрын

Thank you Hector!

@brucewayne2773 21 күн бұрын

Your sweater remained clean, impressive.. 👍

@AbersonPlastering 21 күн бұрын

For the most part. You’re right I just put on over an inch of mud and it stayed fairly clean. It’s an old sweater. Thanks for chiming in.

@tanisdevlin6963 6 күн бұрын

great job!

@Pablomaganazd 3 ай бұрын

Good listening to you Sir, very wise. #2 shovels...😊 JR is blessed.

@AbersonPlastering 3 ай бұрын

Thank you Magzfam. Yes #2 shovels😀

@BuiltOut 9 ай бұрын

That turned out beautifully 👌

@dasqueege7903 3 ай бұрын

Good job pal 🤙👊

@mrtonod Ай бұрын

Seems like quite a bit of artistry involved here. Have never worked with stucco but have a stucco garage that has some cracking stucco. going to attempt to do it myself but, this is years of practice we are seeing here and if my repair is half as good as this one i will be grateful.

@AbersonPlastering Ай бұрын

Hello mrtodod , and thank you for the collateral compliments on my work. I really appreciate that. Might I suggest that you do your repair in three different steps over three different days to achieve optimal results. No need to stress using fast setting materials

@mrtonod Ай бұрын

@@AbersonPlastering Thanks so much for the advice.

@donsmith7979 2 ай бұрын

Great Job !! 😁👍

@carlosvazquez8962 3 күн бұрын

Can you give me a list of what stucco you used ? You used 3 different bags ?

@AbersonPlastering 2 күн бұрын

@@carlosvazquez8962 hi Carlos. Here it is. First step mix 1/2 bucket of base scratch and brown stucco mix by Sakrete. Add more water then top it off with a small amount of Rapid set mortar mix. This is your base coat plaster no matter how many coats you have to put on to obtain appropriate thickness. Then for the final bag of material I used mission finish by La Habra stucco. Available at West coast stucco supply in Oakland ca.

@AbersonPlastering 11 ай бұрын

There is acrylic adhesive that we add to the mix for ultimate adhesion to the walls

@Michael-nv5rp Жыл бұрын

great videos ken,love your easy going commentary,you describe every detail ,im an old plasterer from the uk im in my 60s and still love the skills you show,patching in render isnt easy,we say muck not mud though lol,also the quick setting render is so good ,i use a product called m60,useally sets in 20 mins ,great for backing coats ,then top coat and sponge.keep up the great vids man

@AbersonPlastering Жыл бұрын

Hello Michael. Thanks for the nice comment/compliment. Do you have a Home Depot there in UK? Keep on plastering!

@Michael-di5cl Жыл бұрын

@@AbersonPlastering hi Ken, We have lots of builders merchants in the UK,but no home depot,we have ,Travis Perkins,or jewsons,also Wickes,or homebase and b&q,my joints are beginning to suffer now but I'm still employed and love plastering my friend.

@AbersonPlastering Жыл бұрын

@@Michael-di5cl lol Michael, went bowling yesterday with my daughters. 19 and 23, never felt arthritis in my knees like that before. Sadly my joints are aging as well. Cheers 🥂

@Michael-di5cl Жыл бұрын

@@AbersonPlastering haha ken,yep,we just don't give in brother,I've got a concrete repair tomorrow very deep ,so will use m60 with SBR, there's a steel rod exposed so wire brush that and seal .cheers.🍻

@salomonlopez8930 Жыл бұрын

good job I liked.

@AbersonPlastering Жыл бұрын

Thank you brother

@ernestogonzalez17 Ай бұрын

great video brother

@AbersonPlastering Ай бұрын

Gracious !

@ernestogonzalez17 Ай бұрын

@@AbersonPlastering 🙏

@mauriciomata67 3 ай бұрын

u can used hot water and it will dry more faster.if u whant it to dry faster and do it in one day

@AbersonPlastering 3 ай бұрын

Yeah. In the summer time Jr always lets the hose run until cold water comes through

@markstanton2362 2 ай бұрын

Just waiting for you to back into the wall with your margin trowel sticking out

@AbersonPlastering 2 ай бұрын

Thanks for checking in

@treystills Жыл бұрын

Watched every minute! Thanks for sharing great work. For a new guy like myself if you had to stop work on a smaller project how would you go about it? For example if you had to stop midway on a wall during scratch would you be able to just stop and come back another day or do you have to create some kind of joint or end in a corner? Sorry not a well worded question. Thanks again!

@AbersonPlastering Жыл бұрын

Hi T Wiley. Great ? You can stop in the middle and come back another day on scratch. Not recommend though. Always try and break it at the corner. If you have mud leftover at days end you can put it on a freshly scratched piece that you still need to brown. Scratch it but don’t put on too much mud as you will need room for the brown. I hate having leftover mud.

@darebare444 28 күн бұрын

what material did you use for the texture?

@michaelcleversey9737 2 ай бұрын

22:59 where you located at I have a door that we took out and put f oam on but we have to have it stucco to match existing

@AbersonPlastering 2 ай бұрын

Vacaville ca.

@anthonyflores9336 Жыл бұрын

That was amazing! Really well done! How much did you charge the contractor?

@AbersonPlastering 3 ай бұрын

I think 5 or 6 franklins. Maybe 5.5

@jonlauer5344 5 ай бұрын

Awesome video. I have two windows I am removing after a remodel that are now in the walk-in closet and I need to stucco over. Would you recommend a novice like myself to break something like this up into three days (one for scratch, one for brown, and one for finish), or try to knock it out all at once? Thanks for all of the great tips.

@AbersonPlastering 5 ай бұрын

Hi I have more than 30 years in the trade. Break it up into 3 days. Thanks for checking in

@gritskennedy5007 3 ай бұрын

If that wall flexes too much what if the homeowner just decides to put his hand on the wall and lean against it...will it cave in?

@AbersonPlastering 3 ай бұрын

No way. This is solid. Especially since there’s no plywood behind it. There’s a good 1” of stucco throughout.

@att2976 9 ай бұрын

What’s kind of mix stucco are u using?

@AbersonPlastering 3 ай бұрын

Sakrete scratch and brown combined with rapid set mortar mix and some liquid glue

@charlieromeo5340 Жыл бұрын

Good info but having that small tool in your back pocket is dangerous

@anthonyflores9336 Жыл бұрын

You guys are in NorCal? Davis?

@AbersonPlastering Жыл бұрын

Yes. Vacaville. You?

@anthonyflores9336 Жыл бұрын

@@AbersonPlastering Cool! Gilroy.

@johnw1341 Жыл бұрын

A true pro would have used exterior weld crete plaster glue all the way around the patch joint, especially on an open stud patch to help to keep from cracking years down the road. Just sayin.

@AbersonPlastering Жыл бұрын

Hi John. We’ve been using the admix adhesive for years with no problem. Don’t wasteyour money giving it to Jeff Larson

@AbersonPlastering Жыл бұрын

You’ll probably like the next video we have Coming up it has lots of weld Crete in it

@Pablomaganazd 3 ай бұрын

John it's people like you that piss me the fk off. Instead of learning something you disrespect the man. Notice how he pressed the mix into the edges on a textured wall added line wire @ open framing not only @ 26 on oc stud but on the typical 16 oc. As well. You're probably overpricing smooth Santa Barbara finish patch and repair work in Cardiff by the sea..