Rapid Set Stucco Patch Compared to Rapid Set Stucco Mix

Рет қаралды 11,659

4 жыл бұрын

Check out these Other Stucco Video's / Enjoy!
Rapid Set Stucco Patch Compared to Rapid Set Stucco Mix
• Rapid Set Stucco Patch...
How To Stucco a Wall with Rapid Set Stucco Patch, Short Version
• How To Stucco a Wall w...
How To Stucco a Wall with Rapid Set Stucco Patch Full Version
• How To Stucco a Wall w...
Stucco Repair Video Series
1. Stucco Repair Series Part 1 Demo Found Wood Rot and Termite Damage
• Stucco Repair Series P...
2. Stucco Repair Series Part 2 Wall Air Sealing Foundation Repair Bondo Termite Damage
• Stucco Repair Series P...
3. Stucco Repair Series Part 3 Installing an Exterior Outlet for New Construction Stucco Wall
• Stucco Repair Series P...
4. Stucco Repair Series Part 4 Installing a Stucco Weep Screed Sill Screed
• Stucco Repair Series P...
5. Stucco Repair Series Part 5 Insulating Exterior Wall
• Stucco Repair Series P...
6. Stucco Repair Series Part 6 Installing Building Paper
• Stucco Repair Series P...
7. Stucco Repair Series Part 7 Installing Exterior House Trim
• Stucco Repair Series P...
8. Stucco Repair Series Part 8 How to Install Stucco Lath Mesh Wire With Furring Nails
• Stucco Repair Series P...
9. Stucco Repair Series Part 9 How to Install Rapid Set Stucco Patch
• Stucco Repair Series P...
10. Stucco Repair Series Part 10 Painting Stucco and Wood Trim
• Stucco Repair Series P...
Tools / Materials for this Project
Exterior Electrical Box for Stucco , Masonary
Buy here at Amazon www.amazon.com/gp/product/B00...
Insulation R-21 Unfaced Fiberglass Insulation Batt 15 in. x 93 in. (10-Bags)
Buy it here at The Home Depot
www.homedepot.com/p/Owens-Cor...
Stucco Wire Mesh 27 in. x 8 ft. Steel Lath
Buy it here at The Home Depot
www.homedepot.com/p/27-in-x-8...
Rapid Set 25 lb. Stucco Patch
Buy it here at The Home Depot
www.homedepot.com/p/Rapid-Set...
Kilz 2 Primer ALL PURPOSE 1 Gal. White Interior/Exterior Multi-Surface Primer, Sealer, and Stain Blocker
Buy it here at The Home Depot
www.homedepot.com/p/KILZ-2-AL...
Behr 1 gal. White Flat Masonry, Stucco and Brick Interior/Exterior Paint
Buy it here at The Home Depot
www.homedepot.com/p/BEHR-1-ga...

Пікірлер: 18

@PINOYROCKTRAX 3 ай бұрын

I use both. The Stucco MIX has more coarse aggregate and is a MIX of scratch coat and brown coat used to do quick wall repairs where the metal lath is exposed and more strength is needed. The Stucco PATCH has much finer aggregate and more Portland cement and is meant for PATCHING spalled or surface-damaged stucco. It is more of a finish type mortar and is also formulated to hold better on vertical applications, hence the name PATCH.

@monkeybongos 2 ай бұрын

Sounds like there's a trade off of strength (mix) vs adhering ability (patch).

@philindeblanc 3 жыл бұрын

It is not as easy to use as a finish coat. It looks too stiff. you got short work time..Also wet the wall, or prime it. But it works well. Maybe add a bit of cement to make it stickier...or mix about 1/4 of the Stucco Patch. You should JUST MIST it. Watch a few Kirk Giordano videos ;-)

@jonwikan3986 2 ай бұрын

I think people need to read the directions on the package. I use the Rapid set(CTS) products all the time and they are great! In this case no misting on the patch is only for 70 degrees F and below with no wind.....Above 70F you need to mist it for an hour or so because these products get really hot and will crack without misting to keep cool. and, of course get the surface damp before applying. Also: Rapid set has no portland cement in it nor should you ad Portland. This is calcium sulfoaluminate (CSA) cement. Rapid set also makes small additive packages to slow the setting time of their products if it is too warm outside and you need extra time. They also make flow control packets that are like magic for pouring into forms using their other products.

@user-ex9gs1cy6x 19 күн бұрын

17:34 Troweling downward causes the squeegeed material to fall on the ground =waste. Troweling upward catches/pushes the material ahead of the trowel for a more complete application. 20:09 FINALLY!

@drimont21 2 жыл бұрын

You over did it when you started adding more mix I understand you probably like it a bit dry but that product is also a rapid set so it’s suppose to be slapped on and dry and cure quickly so the more you add the shorter the application time it’s like using 5 minute mud it hardens in no time

@JoshR512 2 жыл бұрын

I’m having the same problem right now. It’s ending up like it was wet sand. Throw it at someone and it breaks into chunks. It’s not sticking. Feel like I have to double the water the instructions say but then it’s too thin.

@lakermark2006 3 жыл бұрын

very useful video. thanks for walking us through your thought process.

@barkingshark6413 6 ай бұрын

I might suggest using a bonding agent when mixing with the CTS yellow 45

@FarmerJimmyJoe 4 ай бұрын

Your trying to trowel the Stucco Mix or Patch to a wet wall. The wall should be SSD ( Saturated Surface Dry ) , Should look like it rained an hour ago, NO water sheen. Should trowel on very easily then. I've done a lot of these using both of these products and also Cement All, it also works great. I retired from CTS Cement , the people who make Rapid Set.

@mostlikelywedoitservices6926 2 ай бұрын

The instruction tell you how much water to how much stucco patch.

@marcleblanc7021 11 ай бұрын

Stucco Mix and the patch are 2 totally different products. If you watch Kirk Gerodiono, I probably spelled the last name wrong. He goes very in-depth on all sorts of products. Know what your products are to fit your application. You said you get what you pay for, which is not totally correct in this application. you are comparing oranges to apples. They both have their application and uses. It seems you are trying to use them in the same way. Which is not working.

@KenTraining 11 ай бұрын

I see what your saying. In my case, I was trying to skim coat an existing wall. the Rapidset Stucco Mix just does not stick to the wall like the patch in this case. If I had a chicken wire new install or a was applying to a scratch coat with the grooves for the mix to catch, the stucco mix may have worked.

@cristinearias6613 8 ай бұрын

Is that sandy?

@KenTraining 8 ай бұрын

yes

@cristinearias6613 8 ай бұрын

I need something less sandy, like 20/30

@kirkdunn1379 10 ай бұрын

Over analyzed the shit out if it Get a scoop fir one, trowel in exposed block wall complete, wait a bit and feather in the joint with sponge....that is a really simple patch....use 1 material and keep it simple.......could have used spec mix and been fine....by time you filled everything the beginning would be ready to float