AC Frequency Made Simple: Primeweld TIG 225x Tutorial

Рет қаралды 34,641

Күн бұрын

Visit my store to learn more about the Primeweld TIG 225 as well as TIG cup kits, gloves, tungsten, and of course TIG fingers® weldmongerstore.com/collectio...
New products being added weekly.
AC balance is another important setting and here is the link • AC Balance Unleashed: ...
2t and 4t settings on the PrimeWeld TIG225 explained here • PrimeWeld TIG225X 2T a...
To show the affects on AC frequency, I stacked several beads using different frequencies from 40hz to 200hz.
100-120hz is a good all around setting but I like to lower the frequency for thicker metal or when I want a fat bead.
Higher AC frequency settings help focus the arc cone for a pinpointed arc.
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingtipsandtricks.com

Пікірлер: 57

@weldingtipsandtricks Жыл бұрын

weldmongerstore.com/collections/weldmonger-top-20-products

@richardfife8192 Жыл бұрын

Other weld videos are a waste of time! This guy is the real deal! Helped me pass a weld test a few years ago! Thank you for everything you do.

@maverick6762 Жыл бұрын

Jodie just wants to help people. Welding can be very intimidating.

@setituptoblowitup Жыл бұрын

This guy's one of the few greats that got me to were I'm at in my endeavors

@gavinm717gkm Жыл бұрын

These videos have been spot on recently! My buddy has the same machine and we’re still learning it. I’ve learned a lot from this channel, thanks for the great content!

@mistermac4118 28 күн бұрын

Thank you for providing the best educational videos!

@drnastey 8 ай бұрын

I have the same machine. And I'm trying to learn and teach myself aluminum welding. This was very helpful and I'm sure I'll be watching many more of your videos. Thank you for the very informative and broken down information.

@RickBaconsAdventures Жыл бұрын

the other day I welded up a worn through cut in a car air conditioning line and I dialed my 280DX up to 320hz. Worked great

@treyrags Жыл бұрын

Another good, informative video to the point. Thank you

@aurktman1106 Жыл бұрын

This is the machine I have, will certainly use this as my how-to!

@paulmorrey4298 Жыл бұрын

Thanks Jody

@iamcancer3298 11 ай бұрын

Awesome instruction... I do similar with mig when cladding.

@StuPierce77 Жыл бұрын

Awesome visual explanation of AC Freq. This could also be a good drill for practicing edge welds vs a single pass on the edge of a coupon. It reminds me of your "padding beads" video.

@mikezanconato Жыл бұрын

Awesome demonstration!

@amcustomfab Жыл бұрын

Congrats on 1 million

@hobbiesthings6948 Жыл бұрын

Your skills are great.

@dougwernham5209 Жыл бұрын

Thanks for the video.

@richardellis3141 Жыл бұрын

Thanks for the lesson

@bogger_welder Жыл бұрын

Great video 🔥🔥👊🏼

@robostyle9773 Жыл бұрын

Thanks for another great video

@shemwayman1146 8 ай бұрын

REALLY APPRECIATE YOUR STRAIGHT FORWARD VIDEOS, YOU ARE REALLY STEADY, KEEP UP THE GOOD WORK.

@mikerobertson83 Жыл бұрын

Long time viewer and thank you for sharing your obvious wealth of experience of the whole scope of the welding activities. I do however, have a question. Have you ever tried to weld copper?

@SenTirTv07 Жыл бұрын

Saya mulai belajar dengan anda , bagaimana menggunakan mesin las dengan baik serta hasil pengelasannya... terimakasih saudaraku...

@hddm3 Жыл бұрын

Yep another Awsome Awsome video my man!

@bendeguzregos7442 Жыл бұрын

Excelent! Thx!!!

@hendrikhanso Жыл бұрын

I find this video to be very true based on my personal experience. my fronius goes up to 2kHz screams like crazy.

@botsbass842 Жыл бұрын

2k.... that's nuts have you found it useful for anything in particular?

@hendrikhanso Жыл бұрын

@@botsbass842 not really. I havent gone much over 180hz for production. Just messed around with settings

@DeerAssassin Жыл бұрын

I agree with many comments, you have explained some settings very well. Where is your video concerning-based current settings? I’ve been searching have been unable to find it.

@WelderB1Family Жыл бұрын

Great info!!! 👨🏾‍🏭💰🤙🏿 Can you do DC next?

@weldingtipsandtricks Жыл бұрын

thanks, good idea

@kathysarmcandy1992 Жыл бұрын

Still like to see you demo some repair on real world bits. A lawn mower aluminum carb flange. Some more cast iron. Piece of grungy fence. Black pipe to, for longer runs. Maybe a thermostat housing.

@alanmony1582 Жыл бұрын

This is great info, just what I need. I have this machine and just learning to weld ally. I'm trying to build a custom intake manifold welding .063 6061 round tube to a .375" 6061 thick flange, I'm guessing I'll have to use the pedal to raise and lower the amps. Any advice out there on settings for this project?

@charleswithrow4113 11 ай бұрын

Can you pulse SMAW with this? Also how do you adjust arc force/ Dig? Thank you!

@cathydoyle4575 Жыл бұрын

Could you do a video lesson on welding aluminum pipe, I can go to work for a water pipe company if I can TIG weld al pipe rolled out. I own the Prime weld 225.Thank you

@jakew6184 Жыл бұрын

I'm having trouble with arc starts on AC with the Primeweld machine. Does anyone know what to adjust the high frequency arc gap to, inside the machine?

@milanp5697 11 ай бұрын

Really enjoy your wideos. Just got primeweld 225 and I am new in tig. I would like to upgrade the cups which came with unit without breaking my wallet. Can you suggest the minimum tip of cups what I should get for aluminum and steinless? Thanks, Milan

@semajniffirg230 6 ай бұрын

no 5 & no 7 for aluminum. No 8 and jazzy 10 for stainless.

@wetonwet3655 Жыл бұрын

Literally saving some money for this welder. Can it be liquid cooled or is it already set up?

@weldingtipsandtricks Жыл бұрын

It comes with an air cooled CK worldwide torch but primeweld does have a cooler that plugs into the machine PrimeWeld TIG Cooler kzfaq.info/get/bejne/sL6ieNV2r7iVimw.html

@wetonwet3655 Жыл бұрын

@@weldingtipsandtricks im mostly getting it to get as much practice as i can with tig and stick. I dont think i will hit duty cycle too often.

@bigpappas65ss Жыл бұрын

Can you help with settings on a Miller Syncrowave 250 DX I’m having a few issues setting it up for heavy cast aluminum parts.

@weldingtipsandtricks Жыл бұрын

This video might help kzfaq.info/get/bejne/ZtyjbLGW3dymnZ8.html

@countryracer69 Жыл бұрын

Trying to sell my old machine to buy this one asap. Hopefully soon.

@charliehuntsman9827 Жыл бұрын

Can you take a look qt the primeweld tig 325

@weldingtipsandtricks Жыл бұрын

Should be seeing that pretty soon.

@charliehuntsman9827 Жыл бұрын

@@weldingtipsandtricks awesome man been welding since highschool, was a welder in the Marines Corp Reserve and also went to college to get my certs and didn't get through the two year program got deployed to Iraq . Than end up home working for a manufacturing outfit that built farm equipment. Now been with a class 1 RR for 10 years as a Thermite welder and Arc welder . Looking to finally have a actual welder in my garage!!! Thanks for all your videos and in site . I definitely dont know it all and I'm always willing to learn more so thank you sir ! 🤘🔥🤘🔥🤘🤘

@Joshmarvin-se7dc Жыл бұрын

That was a helpful video. I’d like to learn more of the fine-tuning settings to weld aluminum and get better at it. I didn’t get a lot of it aluminum experience when I was in college but I do like TIG welding aluminum. I have a dynasty 280 DX.

@taiwanluthiers 5 ай бұрын

My machine will only go between 40 and 100 hz. So I can't really do 200hz or anything like that.

@setituptoblowitup Жыл бұрын

Nice,stack enough you might can build a rocket 🚀 no joke have you seen relativity space terran R rocket? they call 3D printing but if there is complete fusion I call it welding

@Winnieloveweld1 Жыл бұрын

Great welding! Arccaptain wants to invite you to try out our TIG200P welder machine. Would you be interested in giving it a try?

@ronmerson6986 Жыл бұрын

I've always used the term "dig". Talking about the same thing right?

@weldingtipsandtricks Жыл бұрын

In my machines “dig” is for stick welding.

@funfun8095 Жыл бұрын

Can you show how to round the tip with the Lincoln Tig 200, or what to do? I have one and don't have a way to round the tip or at least don't know how to, with this welder. Thanks!

@ktmturbo5836 Жыл бұрын

What do you have balance on?