ACT Clutch Review (Advanced Clutch Technology)

Рет қаралды 12,999

Күн бұрын

Click on one of the links below to contact us on social media if you have any more questions. Feel free to drop a comment!
Consider subscribing. Like & share!
Follow us on IG! weareprimedaily...
Like us on FB! / prime-daily-2191132504...
Links:
www.advancedclutch.com/
www.verus-engineering.com/sho...

Пікірлер: 32

@alexandrecastelo61 3 жыл бұрын

Now that your clutch is all worked in. Are you running into problems with the clutch going into gear at a stopped position, when the car is warm?

@snipa2408 Жыл бұрын

any recommendations on throwout bearings to buy with this clutch?

@esaigarcia9194 2 жыл бұрын

Is it worth it buying this clutch for a stock wrx or just stick with the oem clutch?

@Kochf36 Жыл бұрын

So the pilot bearing is good then, just use the oem tob? Please respond I’m having this kit installed tomorrow and need to know what to tell them as far as what to replace w oem parts😂

@natinatt9834 4 жыл бұрын

Nice

@chickentrappedsoul2984 3 жыл бұрын

Ima need da CIVIC Rebuild ep. 2

@paulwitulski1905 3 жыл бұрын

Install is just as important as the clutch. Even something thing as not putting lube where needed can cause stuff like that. (Lube makes it smooth). Make sure the person doing it knows what they are doing or go to a a professional.

@Gabby69_ 4 жыл бұрын

Quality👍

@PrimeDaily 4 жыл бұрын

Thanks!

@joshmarshman3676 3 жыл бұрын

Great Video, i have a 15 wrx (I'm 2nd owner) car is all stock currently, mechanics say I need to replace clutch apparently, I have a lot of stop and go city traffic, was wondering how much harder the ACT clutch is pushing in than the stock clutch? I don't know if I should just replace with another stock clutch, or install the ACT Clutch. Thanks for your time.

@PrimeDaily 3 жыл бұрын

It’s more stiff but I’ve driven a stock WRX and its clutch is very light compared to the ACT. At first it will be drastic but after a week or so you will love it

@joshmarshman3676 3 жыл бұрын

Thanks for replying, I'm going to call ACT and see which one they recommend. A Subaru mechanic told me not to go with their lightweight flywheel, go stock weight, what are your thoughts? Thanks again for your response!

@evoeyerex3518 2 жыл бұрын

@@joshmarshman3676 don’t listen to the Subaru Mechanic not all of them but some of those guys are complete idiots they’re just trying to get more money out of you so you buy their shit a lightweight fly wheel is completely fine.

@joshmarshman3676 2 жыл бұрын

@@evoeyerex3518 ok, I appreciate it.

@evoeyerex3518 2 жыл бұрын

@@joshmarshman3676 I just bought the act heavy duty clutch and fly wheel but I was also before this running the AC T clutch with a light weight fly wheel and it lasted me like 60k miles but I beat the shit out of that clutch lol

@201jeffrey 4 жыл бұрын

Wait soo when u changed the throw out bearing and that got rid of the noise?! Having the same problem!!

@PrimeDaily 4 жыл бұрын

Yes! I felt like I should’ve done the OEM bearing to begin with🤣

@Superdannyyy Жыл бұрын

Can you do a ACT flywheel with a exedy clutch? I have a frs

@christianarocho3904 Жыл бұрын

Yes of course

@cre8tivegarage157 4 жыл бұрын

oh yea act is quality fasho

@DC-ke8qp 3 жыл бұрын

Is the ACT TOB same as the factory one?

@PrimeDaily 3 жыл бұрын

They told me it is the same size and dimensions but it is not an OEM part. ACT makes their own TOB

@IgoByaGo 3 жыл бұрын

@@PrimeDaily When I put mine in, I replaced with the newer OEM TOB and new clips. I did the same upgrade with prolite flywheel. It rattles A LOT more than yours. I can hear it a bit on yours, but nowhere near how the prolite sounds. Yours sounds great. I am boosted, so yes, it is good for boost. Also, with the prolite, you get the up and down revs a lot more with the AC on.

@dinorodriguez5231 Жыл бұрын

I have a act throw out bearing on my 1992 Mitsubishi Eclipse gst with the 6 puck clutch and lightweight flywheel from Act and no noises and great clutch performance. I bet you didn’t grease the tips on the fork.

@tyreesewill9126 2 жыл бұрын

If anybody is watching this video if you’re going to replace your clutch by a TSK3 it will make your life a lot simpler if you don’t believe me you will eventually find out

@chac7034 3 жыл бұрын

All of act throw out bearing is made from china quantity high quality low

@jimmyscivicEP3 2 жыл бұрын

ACT Clutch is good guys just don't use Pilot Bushing Release Bearing from the ACT, use the genuine !!! 8 Years now 0 PROBLEMS!

@damnitdang 2 жыл бұрын

So the tob is good.. just not the pilot bearing ?

@jimmyscivicEP3 2 жыл бұрын

@@damnitdang Yeap the pilot bearing FROM ACT is NOT good ,is cheap quality and is from china!!!

@damnitdang 2 жыл бұрын

@@jimmyscivicEP3 so the throw out bearing is ok? Not too many toyota 22re setups to ge reviews from. But that's what I'm planning on using it for. I'll jist buy a oem pilot bearing. Thanks