Is there a blueprint available to make the this stand so we're not starting from scratch?? Thanks

specialforcesnavy did you find the plans?

shandilalala sure didn’t

Have you sent the Ridgid Job Max right angle impact driver? Much smaller profile than that RA drill. Only for hex shaft bits, but still...

Do you have the part number for the stapler. Can't find it anywhere.

Id have to agree

Slim drawer toolboxes.

Yes, I'm learning Alot from him compared to school... He f drawers, I say, f school shop class haha

I'd bet that disposable plastic forks are used often by him. It is great to have a tool to get in and pick at something that will get gummed up and ruined that you can then throw away.

Thanks for this tip. I'm making a similar one.

It's true. I fought it, because I like to see the cap color, but there's no doubt they last MUCH longer cap/point down.

@@jeric_synergy8581 Try colored tape on the ends.

Yes, a bit frustrating from an audience perspective. They just have bad social interaction skills, and honestly I'm surprised they're hosts. I have this issue to a small degree, but then again, I'd never accept a hosting position.

I feel like they know something we dont, and that Adam may be a long winded kind of person. They (including him) may be used to this and it's only frustrating for us. Surely it accelerates video editing time. Let's face it, nobody wants to be stuck editing video for longer than they need to when one can be working with Adam and his crew of awesome people.

Sprint316 I kinda think they're trying to act like they know what he talking about, and trying to finish Adams thoughts to show Adam that they like the same things and have a knowledge of the same things Brown nosing lol

Sprint316 they try to stand on his level. But fail. "Oh is that a rivet gun I see down there?" No dude it's not. Calm down.

Right !!!! I just resent started watching the show and I'm so happy that later this guy and the Asian guy doesn't show up anymore.

I've never seen an episode where Will hasn't just let the man talk. Norm is a bit better but he tends to do it too, but he's definitely way less awkward than Will too

Agreed, we all came here to hear Adam talk, not the host.....

yea, let him say NAIPEX in stead of KNIPEX

Haha, was about to comment this very thing. So annoying!

Soo annoying 🤣

I feel your pain. I work in a body shop.. My tools are in closed drawers and still get covered in dust. But no its not an issue at all... Just gets your hands/clothes dusty.. But if your in a dusty environment that shouldnt be an issue..

@@geomod6850 I like to use drum liners for tarps. They're big and round. The tarps are open on the sides unless you take extra time to lash them tight. Then it's a pain to get them off. Yep drum liners that's the way to go. WD-40 is a good rust preventer. I use that on many of my tools. The downside is that it attracts dust.

Faverelli Toolception

Faverelli Hey man, I heard you like tools...

Faverelli Yo dawg, I heard you like tools, so I make a tool to put your tools for tools on.

and those tools were made by tools

+Faverelli We needed the precision of computers to make smaller computers.

Dustin Penner No you were not

MrJabez89 Yes I were

No you did not

MrJabez89 Yeah-huh

Stop lying

+Gort Newton But they are all on the same team, Will works with them. He isn't just a random interviewer.

+Kiwi Gooner this vid is about ADAMS's tool stand and in this case the interviewer is just the interviewer. he did not create or build the stand, yet he acts like he did. i like the tested videos, but whenever it comes to interview-like situations they fail epic.

I don't think he should even be there, let Adam do it

+donibeh lol what? they're friends. Will knows most of the shit already he's just asking for the viewers. This is MUCH better than some random coming in and asking stupid questions. I enjoy watching them interact with each other cause they actually know each other

+Graham Krane i don't question their relationship and interaction is fine. but an interviewer (that is his role here) is asking stuff and the interviewed one is answering those questions. the interviewer is not supposed to answer his own questions. btw. will is the worst "craftsman" on youtube -> whenever he tries to "make" something in tested videos he fails - at least imho. how would i care about his talking about tools and any craft-related topics?

Wrack????? WRONG!!!!!

take a damn screen shot and use some common sense!!!!

I was searching the comments for a plan and feel like this comment was directed at me. Heh. I'm going to do just that now. I liked someone else's idea to make the top removable.

awesome dude........i have a few old ladders to try that with....thinking outside the box......maybe use some slick plastic cutting board material on the bottom as skids instead of wheels......maybe less liable to tip over?

You would have a real life iron man suit lol

Good point, though Adam never disappoints!

It would likely work

you are about 3 yr too early, look at the first episode of his new show savage build

Welp, we found out xD

***** It could be that when he says "firefighter" he's a fighter who uses fire?

RuffneckRaven Liu Kang?

***** If you like fire to an irresponsible degree, you either start fires, or become a fire fighter.

+NerdishAzn The 10.8v. They have more power and torque than you would think.

Tiit Saul he has a bad habit of relating a lot of things to himself instead of letting the other person talk. he'll grow out of it.

w0mbles normally i'd agree with you, but when it comes to a video like this about someone else showing off and explaining what they did, it can strike people as interrupting. would you trade a personal anecdote for a trenchant question? i'm sure plenty of non-jealous people choose the latter.

***** Stainless screws........

Tiit Saul If you let adam just talk, they'd have 3 days footage before they knew it. They have to appeal this to all audiences not just the people who could watch him for 3 days talking about some stands . Some things norm butted in on helps break it up.

w0mbles Will and Norm are amazing. These people hating on them should go to another channel

Your situation is completely different than Adam's, so it's natural that your tool storage solution would be different. What you have now makes sense for your current needs, and it is great that you are happy with it. The advantages you list for your system are accurate, however, you leave out the disadvantage. You sacrifice the ability to grab any tool at any time, costing you speed. And it means you are putting tools down somewhere other than their designated storage place. That's a recipe for creating a messy work environment, and possibly losing a tool. Cases can be made to be hung on a rack while open, allowing instant access. Cases with the tools you use less often can be stored on the back side. The cart can be made to fold for travel. It's wheeled base will help you move your heavy tools around airports.

Just because I have a mobile tool setup does not mean it is unorganized or messy. Case in point: I have one case that holds my 20v impact, 20v hammer drill, 20v charger, hole saw kit, 40pc HS drill set, 10pc masonry bit set, impact rated driver bits (standard through security), stepper bits, tap set with cutting oil and a few custom rotary tools I have created. (NOTE: the saws, drills and driver bits are all in bespoke cases within the main case for organization) While this kit does not specifically meet Adams F-O-R standard it does contain within a standard size box (the previously mentioned Rigid system) everything needed to make holes and attach fasteners in most materials. There is also the point that on job sites you seldom work directly from your transport cases but rather from small task bags or tool belts. You aren't sitting a pristine workbench with your cup of coffee, you are climbing ladders, working from lifts, trudging through mud and in general having to deal with whatever conditions the site delivers. You carry only the tools needed for each specific task. You also seldom have a "shop" area on a job site where you can run open, unsecured tool systems. Those who do not keep there tools locked up an a job are typically the ones having to borrow yours because theirs were stolen. Yes, Adam's situation is different from mine. He basically has a big box of toys in his own private playground and I have to make a living with my tools where ever the job takes me.

Re-read my comment. I never said your system was unorganized, or messy. I said you waste time with it. However, if you only work from tool belts, that's a different thing entirely. Feel free to insult people who work in shops, if that makes you feel superior.

You wrote: "You sacrifice the ability to grab any tool at any time, costing you speed. And it means you are putting tools down somewhere other than their designated storage place.That's a recipe for creating a messy work environment..." This is insinuating that my system is unorganized and therefore messy. If you can sit in one location and have all of your tools within immediate reach then you really don't have that many tools. And if you have the discipline to have an organized shop tool system then you have the discipline to have an organized mobile tool solution. Yes, things can get messy on job sites but that is why I work small task groups then return to my tool area to reset for the next set of tasks. It was not an insult but an opinion built over 40 years about the difference in work techniques and methodologies between those who only work in there own shops and those who have to work in a wide variety of environments and situations. I have worked with many people who were great craftsmen in their own spaces but couldn't cut it in the field because they couldn't adapt their fixed shop routines.

George Jr I know what you mean.

Or screwing an important screw in a confined space Or spray painting newly made project and trying to make it look exactly like the original, u get a sneeze, a very bad stomache, an itchy eye, scalp or someone screaming for to eat dinner or repair their shit

thank YOU ,,I have been looking for some thing to go down into my sparkplug hole to pick up a washer that fell in ..that is going to do the trick!!!!

deepsquat600 That is exactly what i used mine for!!! I found mine at Gander Mtn. on sale for 5$ and knew it would be perfect.

Ebay. Laparoscopic surgical instruments

Make friends with a surgical nurse. Hospitals use those, and many other tools, once and then throw them away.

Thanks internet guru

Who cares? Why would the interviewer need to know anything?

@@dcan911 to make a good interview

@@irongreek7722 but then what would you moan about?

@@dcan911 something else

It was annoying me too

Even just basic measurements would be great! I am going to make one for sure.

+Brian Hiatt This is why we learned algebra in school, people.

+nzlemming judging by the video and taking adam's height into account, the stand is 12 feet high.

47 might like that tool 😂

Mr_NarwhaL If someone has that many tools but isn't capable of building that stand themselves then they should give away their tools :)

Rob Jeffrey Yeah but an aluminium or plastic industrial quality one would be cool.

Rob Jeffrey hey you get outta here with your logic! Nah jk, but I'm sure there would be some mechanics or whatever that haven't thought about this, and would want one.

synical13 o shit, grape jelly, shit just got real.

Rob Jeffrey "There tools"? Where tools? I don't get it. If someone isn't capable of not making a mistake in their sentence, then they should give away all of their keyboards. I could use a new one... >:P

Tim Calvin Perhaps the white balance couldn't cope with two pale ginger guys wearing blueish clothes.

Tim Calvin Color grading seems to be the issue. As the camera records in S or V log which is a flat profile. Possibly a rush job to produce more content.

Looks like the main cam is an ungraded (or badly graded) sony and the b cam is a canon. It doesn't cut well and is distracting! Pity as it's a good video all the same.

CreatureOTNight If they did in fact shoot log, they probably just applied a generic LUT.

Tim Calvin Sudden outbreak of jaundice in the Tested office, perhaps.