Adding Ethernet Modules in Studio 5000

Рет қаралды 11,026

Күн бұрын

One of the great advantages of Allen Bradley's Controllogix and Compactlogix PLCs is their ability to read inputs and control outputs just is the I/O were directly connected to the PLC. In this lesson we show you how to add your remote Ethernet I/O to the Studio 5000 I/O configuration.
Get the full details of this lesson at twcontrols.com/controllogix-c...
Items used in this video:
PLC Trainer twcontrols.com/plc-trainers
The above links make these videos possible. Please use them!
Support these videos while you advance your skills courses.twcontrols.com/

Пікірлер: 40

@4.0Solutions 3 жыл бұрын

Great video! Thanks for putting in all the work to help get more people involved in our Industry! 🙏

@TimWilborne 3 жыл бұрын

It's our pleasure, thanks for watching!

@randycort3142 3 жыл бұрын

Thanks Tim, very cool and powerful!

@TimWilborne 3 жыл бұрын

You are welcome Randy.

@sudhirgupta7558 Жыл бұрын

Thank you for the good video.

@TimWilborne Жыл бұрын

You are welcome

@rixpanapasa8977 3 жыл бұрын

really intresting tim and thanks

@TimWilborne 3 жыл бұрын

Glad you enjoyed it

@lanthonyperdum6430 3 жыл бұрын

Thanks a million...It would be great if you could do a video on how the green light is true in the logic even when there is no ENBT communication...

@TimWilborne 3 жыл бұрын

Noted

@Akens888 Ай бұрын

I wonder if you could do this while having with a chassis that has both Honeywell C200 CPM & IOM in it as well as Ab Enet and IOMs.... Not saying its a good idea but now I am curious.

@MrJosewils 2 жыл бұрын

Ficou top como uma cpu que e demais posso controlar vários rack com Ethernet ,a longas distância, a controlnet ficou obsoleto?

@nithishkumars3113 2 жыл бұрын

Sir kindly give me a suggestion for seimens S7-1500 plc and allen bradley power flex 525 driver is can make communication delay or any disadvantages compare to g120.

@nicholasjohnson4227 Жыл бұрын

Could this exact scenario be done with the Studio 5000 Lite edition? Like can you control the I/O modules on the. ControlLogix chassis even thought 5000 Lite can’t program ControlLogix PLC’s?

@TimWilborne Жыл бұрын

You can add Ethernet modules with Studio 5000 Lite also.

@rollinfernandes2135 3 жыл бұрын

Hi Tim, I had a question. What is the maximum number of digital I/O that can be interfaced to one ControlLogix processor? also What is the maximum number of analog I/O that can be interfaced to one ControlLogix processor?

@TimWilborne 3 жыл бұрын

Hi Rollin, this link will help. literature.rockwellautomation.com/idc/groups/literature/documents/sg/1756-sg001_-en-p.pdf

@Time-Trvlr 3 жыл бұрын

Question: Can the ControLogic Processor be removed and with the power supply still in place use the Backplane as a RIO?

@TimWilborne 3 жыл бұрын

Yes, a Controllogix chassis doesn't need a processor. Lots of times we use them as networking bridges, most popularly Ethernet to DH+

@Time-Trvlr 3 жыл бұрын

@@TimWilborne Thank you Tim… (@_@)

@johnrece6622 3 жыл бұрын

Any tips I could get on changing a 1756-l62 to a 1756-l72?

@TimWilborne 3 жыл бұрын

Right click the controller at the top of the left pane and select properties, then on the general tab, select Change Controller.

@hectorvaldez8471 2 жыл бұрын

You're doing such a great job with the PLC tutorial Tim. Question to the expert: One of the I/O Ethernet seemed to got corrupted. The whole ADC project was working fine but all of a sudden, I think, one of the Ethernet modules shows like " Box_Opener". If I try to delete it I get an error pop up saying: "Failed to delete module 'Box_Opener'. Invalid consume producer. Module is not a valid producer." Could you help me tackling this problem? I'm using Studio 5000 on a Windows 10. I appreciate your help.

@hectorvaldez8471 2 жыл бұрын

Forgot to mentioned that the "unknown" device is another PLC that I'm able to confirm is up and running in the same local network.

@TimWilborne 2 жыл бұрын

Haven't run into that Hector but Rockwell knowledgebase ID QA28431 seems to be what you are looking for.

@hectorvaldez8471 2 жыл бұрын

Tim, I called Rockwell and they helped me out. I would like to share the solution with your audience, my 2 cents, they suggested to update Logix Designer from 30.00.00 to 30.02.02 which has many patches and updates, and IT WORKED!!!! Thanks.

@TimWilborne 2 жыл бұрын

@@hectorvaldez8471 Very good to know, thanks for sharing!