Studio 5000 & RsLogix 5000 Produced and Consumed Tags
Рет қаралды 25,663
3 жыл бұрынIn Controllogix and Compactlogix PLCs, produced and consumed tags take place of messaging instructions for relaying information between two Allen Bradley PLCs. Additionally produced and consumed tags are deterministic compared to a MSG message instructions making them a much more reliable means of communications.
Get the full details of this lesson at twcontrols.com/controllogix-c...
Items used in this video:
PLC Trainer twcontrols.com/plc-trainers
The above links make these videos possible. Please use them!
Support these videos while you advance your skills courses.twcontrols.com/
@bayareajacob 3 жыл бұрын
Your timing is always perfect. Just ran into a issue in our new can plant that I needed to figure out why are produce and consumes werent working. This was a great video and now required watching for the new guys and gals in the shop.
@TimWilborne 3 жыл бұрын
Great to hear Jacob!
@nami_isik Жыл бұрын
I sincerely thank you for your descriptive explanation and for solving our problems.
@TimWilborne Жыл бұрын
Glad I could help out!
@mosalah2265 11 ай бұрын
Many thanks for your time ❤
@malcolmandthebends2914 3 жыл бұрын
Very Cool thank you Tim!
@TimWilborne 3 жыл бұрын
You are welcome
@worksux82 11 ай бұрын
This is a great video but I'm looking to find the used bits in a plc. Do you have a video showing how to find the open hard wired bits available to use?
@TimWilborne 11 ай бұрын
Right click, cross reference and look at the destructive column to have a Y in it. Also there when you're selecting them, they are dark gray if they have already been used and life gray if not
@lucianoteles2109 15 күн бұрын
muito top os videos.obrigado teacher
@TimWilborne 15 күн бұрын
You are welcome.
@brucecasilio42 3 жыл бұрын
thank you for all your videos - do you have training sessions and where are you located - thanks
@TimWilborne 3 жыл бұрын
We do in person training in Roanoke, VA. See link below. twcontrols.com/plc-lab
@user-se1kt1wl6x 8 ай бұрын
Quick question about this. As far as traffic over the network, do MSG or produced/consumed tags have a larger bandwidth?
@TimWilborne 8 ай бұрын
I don't know. I would think it would have more to do with the consumed RPI compared to the sample rate of the MSG than the actual packet size.
@learning9503 Жыл бұрын
tags used by HMI, consumed or produced? how to search them in logix5000?
@TimWilborne Жыл бұрын
They would only show up as base tags in Studio 5000.
@James-oj6lk 8 ай бұрын
Hey Tim, is there an advantage to using produce/consume tags vs. msg instructions, to send info between plcs? Network wise?
@TimWilborne 8 ай бұрын
Yes, produced/consumed tags are "deterministic" meaning you will know if it fails. MSG instructions are limited on number and don't take the priority of produced/consumed tags.
@James-oj6lk 8 ай бұрын
@@TimWilborne
@justinmartin4751 Жыл бұрын
heh Tim, Thanks very much for this video on Producer/Consumer tags. I'm taking my first RSLogix PLC course this term at school, and for today's lab the Instructor was explaining on how we set up 2 RSLogix PLCs for Master and Slave communication. The lab involved in removing the processor for the Slave PLC and then adding all the I/O modules of the Slave PLC to the Master PLC. The goal was to be able to have the Master PLC operate the I/O assigned to the Slave PLC. I kinda got lost in this lab, so I was wondering do you have a video that describes how to set up this type of operation? Unfortunately our lab manual does not go through and explain the set up process very well. Thanks again for these videos, they have really helped me out. Justin
@TimWilborne Жыл бұрын
Glad our videos have been helpful Justin. What PLC were you using?
@justinmartin4751 Жыл бұрын
@@TimWilborne Heh Tim. I am using the RSLogix5000 (Studio 5000 Logix Designer) with the 1756-A10 chassis and the 1756-L81E ControlLogix Processor. I think this is what information you're looking for. Thanks again Justin
@TimWilborne Жыл бұрын
@@justinmartin4751 For just a remote chassis, you wouldn't use the Produced and Consumed tags. Just right click Ethernet under IO Configuration then New Module.
@joaquimferreira4796 3 жыл бұрын
Thanks
@TimWilborne 3 жыл бұрын
You are welcome!
@josevitorandrade5233 Жыл бұрын
Is there a way to detect timeout easily using this method?
@TimWilborne Жыл бұрын
Yes, you can use the GSV instruction to see the IO light.
@johnrece6622 2 жыл бұрын
Do those function the same in rs5000?
@TimWilborne 2 жыл бұрын
Yes they do John.
@brucecasilio42 3 жыл бұрын
do you sell your trainers - thank you
@TimWilborne 3 жыл бұрын
Yes we do Bruce. See link below. twcontrols.com/plc-trainers
@rangaswamy8604 3 жыл бұрын
Good video but video froze at the end part when you were explaining tag types and monitoring.
@TimWilborne 3 жыл бұрын
Yes, didn't realize it until after I posted it, I'll get it fixed and re-uploaded
@timcombs7646 3 жыл бұрын
Your video froze up as you were monitoring the tags for troubleshooting.
@TimWilborne 3 жыл бұрын
Oh no! Did you happen to catch the time?
@timcombs7646 3 жыл бұрын
@@TimWilborne it started earlier, but pretty much everything after about 18:33
@TimWilborne 3 жыл бұрын
@@timcombs7646 Not sure what happened, the rough draft has it but sure enough, this one doesn't. Thanks for pointing it out.
@horacioarturomosquerapandu9897 Жыл бұрын
what about float or real tags
@TimWilborne Жыл бұрын
What is your question about them?
@HR-fw2de 3 жыл бұрын
👍🏼🌹
@hiwaabdulrazaq7920 3 жыл бұрын
Thanks
@TimWilborne 3 жыл бұрын
You are welcome!
SolisPLC
Рет қаралды 23 М.
ISSEI / いっせい
Рет қаралды 72 МЛН
Alex Boyko
Рет қаралды 323 М.
Ujjawal4u. 120k Views . 4 hours ago
Рет қаралды 8 МЛН
Typecase
Рет қаралды 1,8 МЛН