How to Replace Tensioner Drive Belt 1.6 hdi, 1.6 tdci

How to Replace Tensioner Drive Belt 1.6 hdi, 1.6 tdci - Citroen / Peugeot

Рет қаралды 190,599

5 жыл бұрын

All models are equipped with a single, multi-ribbed auxiliary drive belt. The belt tension is automatically adjusted by means of a spring-loaded tensioner.
In the meantime, the roller rolls out, as does the bow and the bearings. I replace the tensioner after 235.000 km. This is only available for models with automatic tensioner.
In this video I will show you step by step how to replace the automatic belt tensioner and the accessory belt drive on the next cars: Peugeot 1.6 hdi, Citroen 1.6 hdi, ford 1.6 tdci, Volvo 1.6d.
WARNING!
This video is for informational purposes only.
Any injury, damage, or loss that may result
from improper use of these tools, equipment,
or from the information contained in this video
is the sole responsibility of the user
and not Adrian Dragan (this channel).
I recommend that you do this in an authorized service.
➢ If you like, you can buy me a coffee: paypal.me/adioperator?locale....
➢ Facebook: / psadiyrepairs
Comment, Thumbs up, Share, and Subscribe!
Song: Jarico - Island (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Track: Jarico - Island
Provided By: Magic Records
Listen To The Original: / island-free
Usage Policy: magicmusicllc.com/

Пікірлер: 139

@thesep1967

Ahem, why is it you always write 'loosening screw' when you actually mean 'removing screw'?? These are two different concepts.

@enforcementofficer4802 4 жыл бұрын

Quality - no messing around with long intros - just gets down to business !!! :)

@ArgosWarrior 5 жыл бұрын

Why not just replace its bearing

@ih8hertz1 Жыл бұрын

On the 2015 c4 grand picasso the 3 bolts are 10mm

@seemaab

You could have rolled the new one to compare the sound. Could it cause ratting in a car?

@jamiealexander3142 Жыл бұрын

Got caught out with the back bolt when changing the alternator out 🙈, results in a 2 man job getting the belt back on afterwards because the tensioner plate hides under the engine mount l, had to use a pry bar to ease it over the crank to apply bit of tension so it could be used with a socket for the rest of the way, nightmare 👌💯

@nonocino2631 Жыл бұрын

If there is a vibration and it is not replaced, what are the results please

@zoranpaunovic4336 Жыл бұрын

Which type of bearing (what number) tensioner have? Is it possible to change bearing only?

@brixmis7 2 жыл бұрын

Outstanding, thanks 🙏

@nigelmitchell351 4 жыл бұрын

Thanks AD for the guidance, although the pulley bearings were fine in my tensioner, at tick over, the adjuster was bouncing almost 10mm back and forth in a blur. This gave rise to a severe noise in the area which reduced as the revs were increased. A new tensioner seams to have cured this noise but a small but silent movement can still be seen at the tensioner pulley.

@luttsylutts6331 3 жыл бұрын

Wow! Such a detailed video, with excellent camera skills. I now have every confidence to do this job myself & save garage bills! Thank you!

@przemekbundy 2 жыл бұрын

Thanks to your video, for the first time I dared to fix something on my Peugeot 206 1.6 hdi. I estimate the difficulty of replacing the tensioner as: 1 on a scale of up to 10. Regards from Poland.

@paulsimpson7329 3 жыл бұрын

Brilliant video, took some finding for my 2010 focus 1.6 tdci but worth the search. Great advice about removing the back bolt first otherwise I would have been stuck. Great Job. Thanks.

@davewalmash6849 2 жыл бұрын

Thanks for uploading!

@Jhampa108 3 жыл бұрын

Excellent video !! This is what KZfaq was made for ... Outstanding

@razzo8525 Жыл бұрын

thanks Adrian you make motoring so much cheaper and not so much a challenge will hit your vids first every time i need a fix,have a good crimbo m8 Razzo