Adjustable Spanner wrench
Рет қаралды 4,524
4 жыл бұрынWe needed a wrench to rebuild a hydraulic cylinder so I made one.
@martinholloway7694 3 жыл бұрын
I made a copy of your tool after an Amazon spanner wrench destroyed under normal conditions. Your version worked great! Thanks!
@tomhendricks316 3 жыл бұрын
Nice. Thanks for watching and letting me know you made one. I'm not a fan of Amazon these days. The more stuff you and I make the better!
@diazaa 2 жыл бұрын
I made a huge one at work years ago. I used 1"x1/2" flatbar, one side with a kick, the other side with an offset. I used a torch to heat and bend the f.b. I need one now for personal use and dont have a torch. This is a really good idea! Thnx man!
@tomhendricks316 2 жыл бұрын
Nice! Thanks for watching!
@socalcaiman 3 жыл бұрын
Thanks for this idea. I also copied it, except instead of welding bolts, I drilled holes in the bars and used O-1 .250 drill rod - just in case it breaks and needs replacement. Worked great once I figured out that it was a left hand thread.
@tomhendricks316 3 жыл бұрын
That's a good idea with the drill rod. I've been using mine all the time. Thanks for watching!
@daveosland3199 3 жыл бұрын
Nice tool! Thanks for sharing! Tip- Try cracking the part loose while it's still on the tractor- You won't have to the hold the cylinder down while cranking on the wrench...
@tomhendricks316 3 жыл бұрын
That is a good tip! I'll be trying that on the next one👍
@KyleH1776 3 жыл бұрын
Good idea.
@tomhendricks316 3 жыл бұрын
Thanks Kyle
BalcevMMA_BOXING
Рет қаралды 4,5 МЛН
Automotive / Hand Tool Specialist @ Taiwan
Рет қаралды 492