Adjusting and Using your Box Blade

Рет қаралды 28,466

4 жыл бұрын

How to use a box blade? I use my Mahindra Max 26 xlt tractor and my Mahindra 5 ft box blade or box scraper. I use a bubble level to rough adjust and then place the blade on the ground for final adjustment. Grading dirt is just one of the many uses for this implement, I also use it on my gravel driveway and for snow removal.
#mahindra #boxblade #compacttractor
Link to similar box blade on Amazon:
www.amazon.com/gp/product/B01...

Пікірлер: 32

@JimmyCapricorn77 3 жыл бұрын

Very good tutorial! I’m a noob to boxblades and this helped a lot.

@k6outdoors 3 жыл бұрын

Glad you found it helpful! Box blades are extremely versatile and well worth the investment! Thanks for stopping in!

@AnanthSarathy 3 жыл бұрын

Mate thank you so so much, simple explanation and tips! Thank you from Australia, Sydney and farm in Mudgee!

@k6outdoors 3 жыл бұрын

Thanks for watching, hope all is well! Cheers

@Jb-uy5zx 2 жыл бұрын

Cool. Good job.

@k6outdoors 2 жыл бұрын

Appreciate it!

@andrewloe206 3 жыл бұрын

Simple explanation. Thanks!

@k6outdoors 3 жыл бұрын

Glad you found it helpful! Thanks for stopping by!

@RCAFpolarexpress 4 жыл бұрын

Good morning Sir 🌞 Great explanation about the Box blade 😊👍 Great tractor therapy 😊 Have a great week and family time Cheers 👍😊

@LouisianaTractorworks 4 жыл бұрын

A box blade can do a lot of projects when you know how to set them up! Have a good one!

@k6outdoors 4 жыл бұрын

Thanks for watching! Cheers

@comlbbeau Жыл бұрын

A word of caution when operating the box blade in reverse... your lift arm turnbuckles are designed for tension (going forward), not compression (going backwards). If you contact an immovable object, like a boulder or root, going in reverse, it is likely you will damage the turnbuckles. Ask me how I know....As simple an attachment as the box blade is, it does require some finesse and trial-and-error practice to get the most out of it.

@k6outdoors Жыл бұрын

Appreciate the feedback, thus far I have not had much of an issue when working in those conditions. Thanks for stopping in!

@daveknowshow 4 жыл бұрын

I finally made it back on the laptop to subscribe!

@k6outdoors 4 жыл бұрын

Thanks for following along on the journey, I'm really enjoying your channel!

@ReapWhatYouSeauxLeJeune 4 жыл бұрын

Hello my new friend great work 👊

@k6outdoors 4 жыл бұрын

Appreciate it!

@synlt 3 жыл бұрын

thank you

@k6outdoors 3 жыл бұрын

Thanks for stopping by

@pace700 2 жыл бұрын

Is there any sway in the blade?

@k6outdoors 2 жыл бұрын

I currently have mine tightened down in the middle. You can adjust the turn buckles and get the box blade to shift left or right

@skinnerresidentialremodeli8109 3 жыл бұрын

If the tractor isn't level, why bother leveling the blade? Wouldn't you want the blade to be on the same plane as the tractor wheels?

@k6outdoors 3 жыл бұрын

Yes you are correct you want the box level with the tractor, what i was referring to is if you are wanting to set a grade you can use it for reference. I also should have mentioned the part about being on flat ground as the tractor was in the situation. Thanks for watching.

@charliesmith9528 4 ай бұрын

Is there a way to adjust width of 3 pt arms on mt compact tractor,,cant get box blade connected because one side the arm wont swing wide enough

@k6outdoors 4 ай бұрын

It will depend on the tractor and what it has. You might need to adjust some turnbuckle or some have telescoping draft links. Also need to make sure you are using the correct category of attachements. If you tractor is a class 0 you won't have enough space to connect to a class 1. Thanks for stopping in!

@charliesmith9528 4 ай бұрын

@@k6outdoors What is a class 0,,my tractor is a 2022 farmtrac 25 hp,its pretty big for a compact and the frame is heavy duty,,im assuming class 0 would be like the small massey fergusons with 18 hp

@veritasdesigns5067 4 жыл бұрын

Weeeee new movies.

@k6outdoors 4 жыл бұрын

Thanks for watching

@N4sir98 4 жыл бұрын

Not trying to be a jerk here but using a level to adjust angle/levelness on the box blade is a moot attempt if your tractor isn't first parked on level ground. The tractor first must be determined to be parked level in order for any successful adjusting of the boxblade achieved as explained in this video. kzfaq.info/get/bejne/rb-IlrB_nNqmmoU.html

@k6outdoors 4 жыл бұрын

Understood, I should have clarified that I use it for reference its nice for getting "close". That is why I make the final adjustments with it on the ground. Thanks for the feedback and appreciate the view.