Adjusting the headlights in a 2003 Honda Accord with a 10mm wrench
Рет қаралды 1,811
8 ай бұрынNobody ever told me I could do this. I tried the screwdriver down the slot way and could never get the screwdriver tip into the gear hole. So I already had a light housing out where I could see where this magical 'gear' was. Turns out ,on top of that 'gear' is a ten millimeter bolt head. A 10 mm bolt head a Gearwrench 10mm wrench fits on perfectly. AND, it is right out in the open - on the passenger side - inside the hood - where you can see it. Waa Laa ,headlights two feet up - off the ground - for the first time in twenty years.
@bingbong1790 14 күн бұрын
thanks Phil. I tried searching for the gear but i couldn't find it for the life of me. I'll try to give this a go!
@oiseaurouge6664 8 ай бұрын
Thank you for the demo, Sir!
@phil4986 8 ай бұрын
rouge, my pleasure. I just couldn't believe no one has mentioned the 10 mm bolt adjuster. It worked great for me. I do still need to change those headlight plastic housings though.
@tooththrhr 8 ай бұрын
Your headlights look a little faded..try the turtle wax headlight polish kit
@phil4986 8 ай бұрын
tooth, defintely. But I am going on Rockauto and buying a right and left housing for $67 each and replacing them. Polishing them only goes so far. I think after twenty years the fade wins.
Donny The Late Model Tech
Рет қаралды 132 М.
Trick Shift Garage
Рет қаралды 1,2 М.
Dan the Fix it Man
Рет қаралды 16 М.