Install and review of the new Dominator Fender from AdvanBlack!
Пікірлер: 36
@woodynlily2 жыл бұрын
Thank You for posting this video. It encouraged me to do the install myself instead of waiting for a jack to lift it. Worked like a charm. Pushing in the two rear bolts that hold the fender was so much easy on the plastic fender. Btw, the center bracket you didn’t install was a pain to put in due to the center bolt spinning if the plate was put on first. If you put the plate on after, that becomes even more of a pain. So I put some double sided tape as a washer to make it Easter to tighten after I installed the plate. Again, this video inspired the install. Thanks again!
@NateDizzle984 Жыл бұрын
I have mine fender off waiting on the replacement. I didn’t take those front bolts out like you did. I was able to squeeze fender through with no issue
@Eubanksproductions Жыл бұрын
Thank you for your video. Very informative and enjoyed every detail you covered. I know everyone's asking you questions about the accessories you put on your bike. But I have to say your bike is awesome! I just purchased a 2015 Road Glide and noticed a couple things on your bike I would really like to put on mine. Would you mind sharing what type of handlebars do you have and what length are they? Also what the manufacture and style the front wheel and fender you installed would be much appreciated. Thanks again and be safe.
@seanpierce9061 Жыл бұрын
Would you recommend using Loctite on the fender bolts?
@freedom6919741 Жыл бұрын
Looks good
@meetbaseball3 жыл бұрын
Thanks for the video. I'm having a hard time getting my custom fender(stretched) on. The CVO style lights are supposed to fit snuggly in the pockets? Do I reuse my tri light bracket on the new install? Please help...
@bigkirbmotors72333 жыл бұрын
I’m not sure what you mean. The extended fender dose not fit the CVO lights and test the tribar light goes on that. The CVO styles and Dominator has CVO style lights but no tribar.
@angelmalkemes29023 жыл бұрын
On advanblack video looks like they put the washers for the fender bolts on the outside you put them in the inside , am I right?
@bigkirbmotors72333 жыл бұрын
Good catch. Probably should have put them on the outside. I think I did on the middle ones but not the forward ones.
@SC-ds9cm3 жыл бұрын
Another bag question, are those the stock 4.5” Harley stretched bags? Looks like they like up perfect with the dominator fender. My concern was the dominator fender would sit down lower them the stock harley stretched bag but it looks perfect!
@bigkirbmotors72333 жыл бұрын
So the new Specials come with these bags. My 2016 special came with short bags the longer bags was on CVOs and specials. So if you have a newer special these bags should be the same.
@SC-ds9cm3 жыл бұрын
Yes I have these newer tapered stretched bags. How does the exhaust cutouts look? From your video they line up nice.
@bigkirbmotors72333 жыл бұрын
@@SC-ds9cm lines up great! Better then the CVO fender I had.
@dirtychevyful2 жыл бұрын
What stand are you using to hold the bike up?
@bigkirbmotors72332 жыл бұрын
I got mine in Japan but it’s similar to what you find at harbor freight. Baxley Sport Chock - Black Crinkle www.amazon.com/dp/B01MR2E5QD/ref=cm_sw_r_cp_api_glt_fabc_KKH6HZH2X1Z7C1ZEPYJN
@pbarre792 жыл бұрын
Wassup bro...I just got the advanblack CVO fender in the mail yesterday and then I saw the dominator lol...I'm thinking about switching to the dominator although the CVO fender is mainly metal and the dominator is all ABS plastic. I have the 4.5 stretched bags as well and my bike is a 2021 RGS. Do you prefer the dominator over the CVO fender? And if so, why? I'm kinda torn here and want to make a decision today. Thx
@bigkirbmotors72332 жыл бұрын
They are both awesome! But I do prefer the look of the dominator. Specifically the cutouts around the pipe.
@pbarre792 жыл бұрын
@@bigkirbmotors7233 that's exactly why I was gonna switch. I'm gonna swap them out
@burgessburrell3 жыл бұрын
Where you find the front tire holder. Been looking for a way to stand the bike upright
@bigkirbmotors72333 жыл бұрын
I got it in Japan when I wast stationed out there. They have the same thing at Harbor Freight I think.
@burgessburrell3 жыл бұрын
@@bigkirbmotors7233 yeah found one but didn’t know it has to be mounted to the floor
@bigkirbmotors72333 жыл бұрын
That’s a little bit different (smaller) then mine. Let me see if I can find one for you.
@bigkirbmotors72333 жыл бұрын
SUNROAD Trailer Motorcycle Wheel Chock Locking & Adjusting Stand www.amazon.com/dp/B07YF99KF5/ref=cm_sw_r_cp_api_glt_fabc_N7HS6S7CF8W1875P2CVK?_encoding=UTF8&psc=1
@angelmalkemes29023 жыл бұрын
What did you do with your antenna
@bigkirbmotors72333 жыл бұрын
I installed a hidden one from Harley under front fairing. Reception is diminished but I don’t really use the radio that much.
@keepingitpinnedlongasican25132 жыл бұрын
howd you do the battery extension covers on the CVO bags
@bigkirbmotors72332 жыл бұрын
They are from AdvanBlack also: kzfaq.info/get/bejne/i81hfrNemKjMgas.html
@keepingitpinnedlongasican25132 жыл бұрын
@@bigkirbmotors7233 I kinda figured. But I thought the skirts would only work for full extended bags. Side note since you responded and have had all the different setups. What should I do buy a rear facia or just get the whole 1 piece fender?
@RideAboutNow2 жыл бұрын
Awesome video. What kind of seat do you have?
@bigkirbmotors72332 жыл бұрын
It’s Harley brand Tallboy
@jamess35323 жыл бұрын
那是一個非常不錯的摩托車護舷
@abesalazar45853 жыл бұрын
Where did you buy the fender ?
@bigkirbmotors72332 жыл бұрын
AdvanBlack
@bigkirbmotors72332 жыл бұрын
AdvanBlack.com
@cleatussfmo74373 жыл бұрын
Are those stock "special" bags....I guess CVO style bags?
@bigkirbmotors72333 жыл бұрын
Depends on the year bike. My bike is a 2016 Special that had short bags on it. The newer specials have CVO style bags. Hope that helps.