Advanblack Dominator Stretched Rear Fender Fits 14 up

Рет қаралды 70,487

3 жыл бұрын

Check out the fender here - www.advanblack.com/advanblack...
Dress up the back of your bagger with Advanblacks color matched stretched rear fender. This fender is a bolt on replacement for your stock rear fender. Made with thick ABS, pre drilled, ready to install and color matched to your bike. Includes CVO style brake/turn signals available in smoke or red and a frenched in curved license plate with white LED's that is available in chrome or black. All plug and play wire harness that fits 2014 through 2020 US models. This fender is available in all exhaust types. Dual cut for dual exhaust, single cut for 2 into 1 exhaust and no cut for side pipe or custom turn downs. Pair this fender with out color matched 4.5 inch stretched bags for a truly custom look.
#advanblack

Пікірлер: 107

@Gaming_Biker 3 жыл бұрын

This is exactly what I was looking for. Bad ass. Now the only part missing would be an outer fairing for Street Glides 2014+. :)

@magusnagas8603 Жыл бұрын

Great video! Did it myself today. Watched the video as I went. Got it done it about 2 hours.

@angelmalkemes2902 3 жыл бұрын

Great video very helpful! But I did notice there was no mention on moving your antenna if you had one , other than that awsome video thank you !

@CryptoiNNERG 3 жыл бұрын

I need these! 🔥

@blackedoutbandit Жыл бұрын

I need this fender and bags. I love the look.😮😮

@OZARKSHDRIDERS 3 жыл бұрын

Always great stuff here on your channels Brother, thanks 💯

@Advanblack 3 жыл бұрын

I appreciate that...thanks man!

@Advanblack 3 жыл бұрын

I appreciate that...thanks man!

@OZARKSHDRIDERS 3 жыл бұрын

@@Advanblack anytime man 💯👍🏼

@alalvarez6026 2 жыл бұрын

Great detailed installation thanks

@Advanblack 2 жыл бұрын

Glad it helped! Thanks for checking it out!

@rudegunner5661 7 ай бұрын

Gonna finally change mines out this weekend.

@rickmetzler3054 2 жыл бұрын

Just received my Dominator fender for my '14 SG and this video is super helpful - I've watched it a few times, both before and after receiving my fender. I've got some different factors like we all will like CD lights around my back end on the stock fender, etc. as well as Legend Arc compression reservoirs mounted down low where the rear bracket attaches. So with that said, I have a couple of questions: 1) Did you pull the stock harness out, leave it or cut it? 2) Why can't the rear bracket and license plate be put on with the fender off and then clipped into the wiring after? ....again, thx so much for this excellent video !

@jaymcneill103 Жыл бұрын

I just purchased this fender. Do you have a video showing how to install the lights into this fender

@wam1388 Жыл бұрын

would this work with the regular stretched bags or would it look off? or would i need to get the cvo style instead. i really like the idea of the molded in license plate frame on this one, as opposed to the cvo's..

@jonwarren9979 2 жыл бұрын

I am interested in what y'all used for your audio and speaker system. p.s. and the turn downs. I purchased no cut out bags and fender!!

@markduer3926 Жыл бұрын

Take off your docking hardware or risk scratching and marring the sides of the fender. Can also use a holesaw to route the harness underneath the fender.

@jamesdunn3508 2 жыл бұрын

Will this fit my 2019 electra glide standard. I'm looking yo do this fender with your stretched bags

@michaelmccarty9333 2 жыл бұрын

Which stretched bags go best with this fender? The 4.5” stretched bags or the stretched extended saddlebag bottoms? Or is there a difference between the two?

@wesleypayne1870 Жыл бұрын

Do you guys make a rear fender for a 2007 street glide

@austinwilcox762 3 жыл бұрын

FINALLY !!!! When this drops it’s in the cart for sure, can’t wait for that amber whisky!!!! When will these be available?

@Advanblack 3 жыл бұрын

very very soon...sign up for the newsletter over on advanblack.com and youll be the first to know. The dealers on FB are already taking orders from them as well.

@jerryjones5732 10 ай бұрын

Will this fit on ‘23 road glide limited? I’m concerned about the wiring harness that the dominator fender comes with being that my turn signals are on my king tour pack

@kuehl92 2 ай бұрын

Just curious, does the orange bike at the end of this video have the 4.5" extended bags on it from advanblack? I want the same set up at the orange bike for my 2022 streetglide. Also was size exhaust is that. 4.5" exhaust? I was thinking about getting the chrome 4.5" chrome works exhaust, hoping it will look identical to the orange bike, just black and chrome. Great videos btw, very helpful. Thanks

@GK-bh1tp Жыл бұрын

Does this fender line up well with the tapered cvo style bags?

@fdxuser7242 3 жыл бұрын

Anyone knows where to get those 8 inch speaker grill covers shown on this video ?...I thought they were AB, but they are not...

@brandonhinsey4526 Жыл бұрын

When will you guys make this fender for a 2006 FLHTCUI? Thanks in advance!

@EZridah83 Жыл бұрын

Can I install this on my 2018 Road King?

@MRiverseltoro 3 жыл бұрын

What pipes are those on the orange bagger at the end of the video during the walkthroughs? I like how they fill in the gap all around the opening. I need a set of those, my stock exhaust are too thin and leave a lot of space around.

@Advanblack 3 жыл бұрын

4.5 inch TAB Performance

@shonod Жыл бұрын

Hey Steve, Dave here. I finished adding the Dominator fender and 4.5 stretched bags to my 2018 Road King SPC. I was thinking of adding the saddle bag guards rails that Harley makes. Would those work with the dominator fender? Rear bolt area I mean. Dual cut out of course. 13:42

@grewal559 11 ай бұрын

I just installed my fender yesterday. You guys should make step by step video. I had to watch somebody's else video to install it. Not a big issue but still if you guys have step by step video with details. It can help many people to install it easily

@Advanblack 11 ай бұрын

The video you just commented on is a step-by-step video.

@danielgraham9104 5 ай бұрын

What happens when you already have filler lights from custom dynamics?@@Advanblack

@MPerry-cn8ls 3 жыл бұрын

Really good looking fender. Would like to have the cvo style lights and the tri bar light together. What are the chances that will be offered sometime? Maybe just a fender extension with both types of lights on it.

@Advanblack 3 жыл бұрын

That is not something we are working at this time. I wanted vertical lights on the SG with the tri bar light and ended up getting plasma rods from Custom Dynamics ...radiantz also makes them...plug and play and you can have the best of both worlds...however it is not a the thick cvo lights...its a much more streamlined look.

@jeffjones2493 3 жыл бұрын

Hi Steve enjoy the video's greatly appreciated. My question is what brand battery drill are you using?

@Advanblack 3 жыл бұрын

Hey Jeff thanks man...number one tool used in our shop is that Milwaukie M12 ratchet. Hands down. That thing is a beast. All my M12 hand tools were purchased from Home Depot and some spare batteries from amazon.

@joeshields8974 3 жыл бұрын

Hey Steve,, great video!! Do they have any plans to produce this style of fender without the lights?

@Advanblack 3 жыл бұрын

Thanks Joe...not that I know of...not at this time.

@Storyzallday 2 жыл бұрын

Do you guys have the tank covers for a ‘22 street glide special. It has the gas port on the right side. Was curious if y’all over came that yet. Love your products!

@Advanblack 2 жыл бұрын

we are currently making it right now.

@shannonbires2961 3 жыл бұрын

Steve does those cut outs line up with the stock stretched bags like on the cvo or newer SGS and RGS bags

@Advanblack 3 жыл бұрын

im not sure man I havent tested them yet. I just got this finished version a few days ago but ill let you know.

@sickstring04 3 жыл бұрын

Steve what’s up man, how is the contrast between the running lights and brake lights? Is there a big difference between the 2 or when you hit the brake is it only a little brighter? I know some other brands don’t have much difference in brightness between running lights and brake lights. Thanks for any info on this.

@Advanblack 3 жыл бұрын

They are significantly brighter when you hit the brakes or activate the turn signals.

@twolrbuffalosoldier5514 2 жыл бұрын

Steve, the bottom bracket, that ties into the filler lights, is it necessary to replace? Im working with a 19 Ultra

@Advanblack 2 жыл бұрын

It should be installed to re enforce the rear of the fender. Does your bike not have the bracket under there?

@MontanaFree 2 жыл бұрын

Will this work with my Custom Dynamics Magic Strobe brake lights? 2017 CVO Street Glide. Thanks! Awesome light!

@Advanblack 2 жыл бұрын

yes ...both of my bikes have the magic box and this fender.

@bighonkeyshera 3 жыл бұрын

I know the cvo fender from advanblack is steel with an abs facia, this whole fender appears to be abs. How is the strength on it. Asking because the wife is always riding with me. Thanks

@Advanblack 3 жыл бұрын

My wife and I ride on this fender all the time..its plenty thick!

@nobleff51775 3 жыл бұрын

will the defender duel cut out match up ok with the cvo style streach bag?

@Advanblack 3 жыл бұрын

The cut out is the same so the bag matches the fender above the exhaust but the fender will be longer as its designed fore the 4.5 inch stretched bags and the cvo bags are about a 3 inch drop.

@Tonybfast 2 жыл бұрын

What saddlebags from advanblac work with this fender? I'm bout change colors and will go with advanblack products. My bikes a 2016 streetglide special. Is everything plug and play? Good video

@Advanblack 2 жыл бұрын

This fender is made for the 4.5 inch stretched bags. Not sure what you mean by plug and play on ABS parts. The bags are drilled for your existing hardware and the fender is a replacement. Take your old one off and put the new one on.

@neilcarlile63 2 жыл бұрын

Are there plans to produce a chrome trim for the lights to match the license plate chrome surround?

@Advanblack 2 жыл бұрын

No..the lights do not allow for any trim to put on them,..they insert form the back.

@austinthacker7589 3 жыл бұрын

Hey Steve, or anyone that can help with this question, I'm getting ready to do a build and want to change the color of my bike but want to stick with a harley color so I can order them "color matched" and save myself some painting. The question is what is the best way to see all of the colors you offer? Thanks in advance.

@Advanblack 3 жыл бұрын

Go to our website and click the "by color" option and you can see what colors we offer. www.advanblack.com

@mike-pg5nl Жыл бұрын

What about the antenna hookup? Since this fender does not allow for this, do you just remove the antenna housing underneath?

@Advanblack Жыл бұрын

No fender or extended fender has a hole cut out for the antenna. You can relocate your antenna with a hidden antenna that goes under your fairing.

@angelmalkemes2902 3 жыл бұрын

Do you recommend putting locktite on the bolts when reinstalling?

@Advanblack 3 жыл бұрын

Blue loktite can be used in the install

@johnnycarvalho2538 3 жыл бұрын

any chance you guys have something like this for an 06 ultra classic ?

@Advanblack 3 жыл бұрын

Unfortunately we do not.

@joem7260 3 жыл бұрын

Was interested on what duel exhaust you have that you can use the no cutouts fender and bags ...thanks

@Advanblack 3 жыл бұрын

I had these custom made for my bike. There some turn down exhausts on the market and I purchased 2 different ones, which ended up being identical and neither fit with the bags so I had to go the custom route.

@joem7260 3 жыл бұрын

Thanks for the response... you have any videos or input on tuners for 2019 2020 glides...

@erwindsouza785 3 жыл бұрын

Those saddlebag speakers on your bikes, what brand are those?

@Advanblack 3 жыл бұрын

The street glide has all SP Audio out of Italy and the Road Glide has the Brazilian PRV speakers.

@houstontaylor9799 3 жыл бұрын

Will this fender line up well with Harley CVO stretched bags ?

@Advanblack 3 жыл бұрын

It will be a bit longer than the cvo bags but overall the area around the exhaust will match up

@Stomponya64 3 жыл бұрын

Will these fit on a 2020 electra glide standard?

@Advanblack 3 жыл бұрын

Yes it will

@oiscustomlife1741 2 жыл бұрын

Hey quick question why don't you make a rear fender extension kit with cvo style vertical lights with either a lighted tri bar or dominator tip for guys like me who don't wanna give up their metal fender but want a little bit more of a custom look hell I'd buy one

@Advanblack 2 жыл бұрын

We have no future plans to make anything like that, unfortunately there isnt anything on the market like that from anyone that I know of.

@oiscustomlife1741 2 жыл бұрын

@@Advanblack ik that's why You guys should make one

@JNMIII-xh1xb 3 жыл бұрын

Just ordered, do the Custom Dynamics Pro Beam CVO lights fit in ?

@Advanblack 3 жыл бұрын

yes..they are the same as the stock cvo lights as ours are...same fitment

@wyomoto1349 3 жыл бұрын

I was just about to ask the very same question.

@whskywolf 3 жыл бұрын

Would those work on Road King?

@Advanblack 3 жыл бұрын

yes...14 and newer

@obriantucker2256 3 жыл бұрын

Will it fit 04 Road King?

@Advanblack 3 жыл бұрын

09 to 21

@JELLYBEANTIME1 3 жыл бұрын

Is it made out of metal or abs?

@Advanblack 3 жыл бұрын

Extra thick ABS

@angelmalkemes2902 3 жыл бұрын

Great video but there’s no mention of what to do with your antenna??

@MRiverseltoro 3 жыл бұрын

They sell a hidden antenna option that goes into the front fairings, check here: www.shoputahharley.com/products/boom-audio-hidden-am-fm-wb-antenna-76000863?variant=13634992963632&gclid=EAIaIQobChMI45jc7OOh8AIVrD6tBh0vnwKCEAQYAiABEgItEfD_BwE

@rickmetzler3054 2 жыл бұрын

Because I don't like the look of the long antenna and the short ones don't work, I have already turned my long antenna around and have it running along the left side, next to the batter and with the tip just a tad under the tank. There are several videos around on it. Now that I have the Dominator, this antenna set-up is working perfectly.

@ess_glide4427 2 жыл бұрын

Hey Steve is that Carlet Grey?

@Advanblack 2 жыл бұрын

Charcoal Pearl ...oem color in 2014 sg

@DustinG26 9 ай бұрын

it looks fantastic but i will 100% drag those

@douglasmembers28 3 жыл бұрын

Hi Steve,, Doug here I have a 2012 road glide ultra is there anyway this fender would fit my HD?

@Advanblack 3 жыл бұрын

it will physically fit your bike however the molex connectors on the wiring are not the same.

@douglasmembers28 3 жыл бұрын

@@Advanblack Is there some sort of separate system I could purchase?

@douglasmembers28 3 жыл бұрын

@@Advanblack Is Advanblack coming out with 2009-2013 Dominator stretched rear fender.

@douglasmembers28 3 жыл бұрын

By the way because of you and your channel I have learned a lot and I saved a ton of money doing parts projects for my Harley. Thanks keep coming with these very informative vids.

@Sblack8123 3 жыл бұрын

Will you be making this for the 09-13?

@Advanblack 3 жыл бұрын

this fits a 09 to 13 however the harness we have only plugs into a 14 and newer. We are currently working on harnesses for the 09 to 13

@coolgeek08 3 жыл бұрын

@@Advanblack how long we looking on that harness? I need that CVO before spring.

@jmorrow8122 3 жыл бұрын

Yeah also curious about the harness or is there a way you could do this with some splicing

@biggmike419 3 жыл бұрын

@@Advanblack any update on the 09-13 harness?

@michiganborn8303 Жыл бұрын

This might just be what I'm looking for to replace the old dog bone taillights on my 2017 Road King. ¤===[[■]]===¤

@phdzzz Жыл бұрын

Too bad, that the licence plates here in the Netherlands are so f#cking big😠

@tjflys Жыл бұрын

The license plate frame is a horrible design when it comes to the wire harness. The wires come out in front of the plate which forces you to cut the license plate up top to give clearance enough for the wires to be routed. The wires for the plate frame really should have been routed differently. Bad design for such an expensive set up.

@Advanblack Жыл бұрын

Unfortunately, every curved plate frame like this one, from several companies are exactly the same way. With such a small frame it is hard to get everything packed into it and have a wire thats not visible after installation.