Hey Robert...Yes I was having some issues with my phone last week and not getting some of my calls. I think we have it all lined out now. Feel free to call me from 8 to 5 CST and you should get me if you have any questions...but it sounds like you got it hammered out....it really changes the look of the bike. I know its sketchy when you start getting close to that fender with a drill LOL ive done a few now so its not so bad but that first one..whew! Nervous! Glad you got it man.

Glad it helped!

Happy to help!

Grateful that the video helped! Thanks for checking it out!

If you do not currently have a fender extension you will have to add it on there. it fits the fender but you need to drill and attach it just like in my road king video here kzfaq.info/get/bejne/d8qlq9eQr8XYfqM.html

Hey check my video on SIK Baggers. I have a video over there that does a fender extension on the 2013 road king. its the same procedure as the ultras and it will get you going in the right direction. kzfaq.info/get/bejne/d8qlq9eQr8XYfqM.html

the RG has stock suspension. My SG has 4.5 bags, dropped an inch and I run air ride so I run alittle lower than normal....no scraping issues but I don't right hard. All stretched bags with any suspension will drag if you corner really hard. So that will always come down to your riding style. Don't forget though we also offer skid plates as well in case you do.

The pre 08 fender extension is a 7" extension. You can trim it down, but it is not required to mount it. and yes the pre 08 does not come with pre drilled holes. You will need to mock it up and drill the holes.

In this video on my channel you can see how I installed it on a Road King..its the same concept. Follow along there. kzfaq.info/get/bejne/d8qlq9eQr8XYfqM.html

In order to put a cvo fender on an ultra it would be a whole fender swap. Not just a fender extension. Here is our cvo style rear fender. www.advanblack.com/harley-parts/rear-fender-parts/cvo-style-rear-fender.html

kzfaq.info/get/bejne/mLNjgJST1Na5pnU.html

you have 2 options on the road kings and ultras. You can mock it up and drill it yourself or replace the rear fender with a street glide or road glide rear fender. This video i shot is the same thing but on an older bike ...but this is what you need to do to do it yourself kzfaq.info/get/bejne/d8qlq9eQr8XYfqM.html

These will absolutely fit 14 and newer bikes and 09 to 13 with a small modification to the front bracket. Dont rely on the fitment on the website its not always correct, If you have any questions please call me on the advan tech support line.

yes...the rear fender extension is made for the 09 to 20 bikes. They are all the same.

we did one here in the shop...it will work..you have some play because of the beauty ring but not much...cut carefully.

We run 4.5 inch exhaust with the 4.5 inch stretched bags...In this style stretched bags you will only find 4.5's even the ones listed as 5 inch are still 4.5s and that refers to the stretch not the hole for the exhaust just so were on the same page.

I guess you coluld put something there..wont hurt anything

There are no tri bar slots in that fender....that design on the back is not for a tri bar light. And it is listed on the website that it does not come pre drilled...so yes that is correct. Unfortunately this is all that is available for a 08 an older bike.

No the ciro filler lights are designed for the tock extension. It is not the same shape at the bottom

if you compare the stock one to the extended one where the antenna would go you will see the stock one is cut right in the slight curve...the extended one has a more pronounced curve at the top. So you can cut the hole in and use the beauty ring from your OEM one but you will need to do it at the top on the flat spot which also requires you to bend your antenna slightly so it goes through the hole. And yes...the bottom of your bags are flat, the extension is curved... that's where you get the .5 inches of difference. They are made to go together.

as far as I know no one makes filler lights for the extended fender.

Yes we have the color scorched orange now.

We do not offer an extension for 08 and older with the tri bar light. sorry

yes you can...Ive used a Dremel and cutter wheel. but it has to be cut at the top after the bend

How did the cut out work for you? I really want to keep my antenna in the same spot

@@thegatechurchnorthdallas866 it worked out perfect! I used a pencil grinder with a round bit and shaped it. Came out perfect!

@@Rvzoo310 thanks Bro!!! I’m going to follow your pattern.

No one at this time makes a fender extension for a low rider

Hey buddy...the bags in this video are the CVO style bags we sell and they are shorter than the 4.5 inch stretched bags. The first 3 videos on this cannel are all done on the same bike. We added the fender extension to show it works with the cvo bags and the 4.5 inch stretched bags.

@@Advanblack 10/4 my full bike kit will be here Monday the 25th including all extended items 🏆🏆

Our fender extension eliminates the antenna...if thats what you want to do then you are more than welcome to dot it. Be aware that the back of our fender extension does not have the same curve as the stock one so you will need to drill it out at the top and then slightly bend you antenna so it coming through the hole straight and not at an angle.

In the description for the fender extension it says For '96-'08 Harley Touring models 7'' stretched & perfect solution for your existing fender. Do not come with tri light bar holes. Do not pre drilled holes for installation. You will need to mock up the fender extension and drill your holes and use the provided hardware.

We do not have any parts at this time for Fatboys

we are working on the color now

@@Advanblack sweet...any idea on a time frame?

Bought the streched bags and extended fender.But now dont have any room to put my plasma rods back on .Any suggestions?

It will not. can you send me a link to where it says it does? 08 and older have a narrower body and shorter length. The 09 and up are much wider so this will absolutely not fit.