WHAT FORD DOESN'T WANT YOU TO KNOW! ABS MODULE PROGRAMMING

No video

WHAT FORD DOESN'T WANT YOU TO KNOW! ABS MODULE PROGRAMMING

Рет қаралды 387,162

3 жыл бұрын

In today's video we get called out to program a new ABS module in a 2009 Ford F150 V8 4.6 4x4 pickup truck. Luckily we can do this procedure without using a J2534 pass thru device or an expensive laptop. By using a relatively unknown function available in most professional level scan tools called PMI or Programmable Module Installation.
!!!Please don't forget to "LIKE" the video & "SUBSCRIBE" to the channel!!!
**********************************************************************
*If this video helped you in any way and you would like to donate. Please
Click the link to Donate! paypal.me/adva...
Thank you so much for your support!
***********************************************************************
THINKCAR THINKTOOL PRO Scan Tool
Check it out here! amzn.to/3s6j55G
Use coupon code U37IVJV4 and save 10% offer expires May 1st 2021
***********************************************************************
Visit our Amazon store here www.amazon.com...
to shop for our channels recommended tools and gadgets!
************************************************************************
If you enjoyed this music then checkout Epidemic Sound here!www.epidemicso...
*************************************************************************
*You can email your questions and concerns to advancedlevelauto@gmail.com
Disclaimer:
Due to factors beyond the control of Advanced Level Auto, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Auto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Auto recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Auto, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Auto.

Пікірлер: 510

@businesscat2895 9 ай бұрын

MFckrs at an authorized Ford dealer service center recently quoted me upwards of $2,500 to replace the ABS for a 2012 Escape - the vehicle itself only cost me $4,500 and there's nothing wrong with it besides the ABS intermittently throwing B1342-20 for ECU internal fault. They didn't even bother putting the vehicle on a lift, had me waiting almost 2 hours despite me being early for the appoinment then billed me $215 for the diagnostic that actually took them less than 10 minutes while they were working on other vehicles ahead of mine. I could've used that money to buy a used module instead. Thanks for putting this information out there - you're a HERO.

@brjones27 6 ай бұрын

Yeh, after getting quoted 1300 to fix an AC issue I fixed myself with a used $20 part, I refuse to go to dealerships anymore.

@businesscat2895 6 ай бұрын

@@brjones27 update: oh, and turns out I didn't even need to replace ABS module at all. After I recently changed all tires on the vehicle to the same brand/thread the vehicle hasn't thrown an ABS warning code since. Apparently mismatched tires will cause ABS errors but of course Ford tech didn't bother to tell me that or they just didn't know...? Anyhow it's obvious they don't want people fixing older cars so they're forced to buy the new shit. Also related had a hot argument with someone who works at DOT stating it's illegal to do your own aftermarket LED headlamp upgrades (such as on a 2012 Escape) for older vehicles yet it's perfectly fine that every other new car has them now, etc. It's obvious the existing laws were lobbied in favor of the manufacturers.

@brjones27 6 ай бұрын

@@businesscat2895 Interesting... my car JUST had this happen after putting on two new tires. ON the way home from the tire shop, in fact. Still stuck in limp mode right now. :/ Has AWD, and only replaced two tires. May be my issue too.

@brjones27 6 ай бұрын

@@businesscat2895 Yeh, this govt is corrupt. Right to repair/replace/upgrade needs more attention.

@businesscat2895 6 ай бұрын

@@brjones27 if it goes away after getting all matching tires then most likely that's exactly it.

@mikechiodetti4482 3 жыл бұрын

There were many times I tried to do that PMI test, but I would get a message indicating that couldn't be done. Ford does have an "As Built Data" function that worked with the IDS all the time. PCM, BCM, ABS, SRS, it didn't matter, they all worked. The early program had you look up data and manually input the info. Later updated program did all the work. Mostly I used it for ABS and PCM. You could also check for updates if they were there. I did a lot of ABS modules with "As Built Data." Good update and thanks for showing how it's done.

@johnaclark1 3 жыл бұрын

Yeah, neat stuff. A few months ago I did an ABS module on a 2013 ford fiesta. My Autel MS906BT did the PMI, on a used module, with no issues whatsoever.

@jaystaxkx9207 2 жыл бұрын

I've got a w013 cmax doing the same thing do you think the procedures are similar? Do you have videos ?

@mv-wb9qm 3 жыл бұрын

Had similar issue Ford wanted $1400.00 for parts and labor to replace the ABS module, sent it off myself to a company and for $145.00 they rebuilt it no programming needed. Works great.

@johncabinetman 3 жыл бұрын

Where did you send it to

@mrhenry1121 2 жыл бұрын

Where did you send it to ?

@yahyaalmallah4019 Жыл бұрын

Hey do you guys find water company it was

@Dan-vt1qt 10 ай бұрын

Still waiting for the company's info???

@michellechoe5111 10 ай бұрын

Where did you get it done at? Please share

@Reactor7392 11 ай бұрын

I, myself am presently buying a 2008 Ford Expedition 5.4L 4WD with R.S.C. function & active advanced traction control. My motivation: upgrading the ABS/RSC module; so when this suv would get stuck: It will not stall or BOG the engine down to get UNSTUCK! This here video is an extremely massive help! Before having My OEM module REBUILT; It had the trouble code B2900!!

@txdm9383 3 жыл бұрын

Just a note when doing this on an abs module you must have the steering wheel centered with the wheels straight ahead as the steering angle sensor is "zeroed" when the module is programmed so if the wheels aren't straight the zero point of the steering angle sensor will be incorrect and there is no function that I could find at least on my scanner to re-zero the steering angle sensor. I found this out the hard way on the first one I did, luckily I could go back and do the PMI function again and correct it.

@robertmedina6875 3 жыл бұрын

Cool thank you for the heads up

@W.Khairi 3 жыл бұрын

A true saver, Thanks a lot.

@codyshaylyn 2 жыл бұрын

Good information to know thanks for sharing

@daleval2182 2 жыл бұрын

Thank you 👍

@cessealbeach 3 жыл бұрын

Man you nailed this one, I got this tool

@matthewsmith4599 3 жыл бұрын

Hey man how much was the scan tool and how is it? Is it like the ford fds or the honda hds? Do you have to buy the difrentmanufactures software? Or is it included? Tell me more please sir

@cessealbeach 3 жыл бұрын

@@matthewsmith4599 Bought it from Amazon, One stop shop, If you need training how to, watch Advance Level Auto Videos. PMI Duplicator. I am not a mechanic, I help my buddy sometimes who has a shop.

@matthewsmith4599 3 жыл бұрын

Thanks boss. And everyone needs a friend like you.

@coydog8426 3 ай бұрын

Great info and video. perfect. short and spot on. Thanks

@honestspirit56 3 жыл бұрын

I have a bad abs module and an Autel maxi pro scanner…..so I hope this works out for me after the swap. I hate going to ford for anything! Thank you for the video!

@steveviscount8566 8 ай бұрын

Did it work?

@stefanos204 3 жыл бұрын

Hi Eric. Greetings from Greece . Nice watching your videos and thank you for sharing your knowledge with us

@scotts1862 3 жыл бұрын

We are replacing an abs module on a Fusion later this week. I’ll give it a try with our Autel Ultra, I’ve seen the PMI function on other Fords but haven’t had a need for it yet.

@harvrindrsingh 3 жыл бұрын

Hi from dubai thanks you are great 👍. Please share more videos on programming

@ndawulaivanisaac4563 2 ай бұрын

Im you don't know how much you help me , thanks for this good work

@billrimmer5596 3 жыл бұрын

That was very informative!! That feature on that tool is really cool!!

@billyyoder8171 3 жыл бұрын

Thank you Eric. Good job. Have a blessed and safe week to you and your family.

@Strider9655 3 жыл бұрын

A little thing called "first time fix", if there's a fault, they replace everything related to that fault, even if it's not faulty...... And it's all profit, because the manufacturers charge the suppliers for the cost of fault caused by their equipment.

@kigoziedrisa7008 2 жыл бұрын

My only regret is not to find to Chanel earlier but thanks iam now and a will continue to learn from yo videos because here in Dubai technicians we gat a lot of such kind of issues and right now I have one car in workshop for the same issue and its Ford.

@bachirasmar 5 ай бұрын

I had an issue on my ABS module and replaced it with a used one. I used Forscan tool which is very cheap and the software is free (extended Lisence free for 2 months but renewable) . I had the Vin mismatch error U2023 and C1525 and C1524. Forscan (free version) could deal with all of them. The As-Built data is verrrrry easy, one simple click to download all parameters. But The ONLY way to clear the C1525 was using a pressure pump- 2.5 bars(37 psi) and use the Pressure bleed option available on Forscan

@jamesmorris7596 2 ай бұрын

was the issue no communication from module, wondering if it can still be done.

@animalmotorsports Жыл бұрын

Why are you wearing a mask? And in a vehicle, by yourself... 😂

@CSM_Tank 3 жыл бұрын

Great video! I have the think diag that you used in the past and that thing is great too. These are important videos. They are short and sweet and convey a lot of good information in a small amount of time. Thank you.

@markmcgraw6193 Ай бұрын

Nice job

@CKBrutus 2 жыл бұрын

Just had to do this last month on a 2011! ford f150. It had a cracked mother board in the abs module. Kept getting service advance track. It threw a code for just about everything. It had 39 codes. I new it was one problem causing everything when both exhaust cam/ crank shaft sensors & all 4 02 sensors were supposedly faulty at the same time. I was thinking no way all this is bad at the same time.

@dominicpatricio5408 2 жыл бұрын

I have the same problem right now. What codes did you have?

@Sheeeeeeeeeeeeiiitt 2 жыл бұрын

Same here 09 F150 king ranch…module refurbished, installed, lights gone…shitty soft pedal still there. Bled and rebled…my wallet

@CKBrutus 2 жыл бұрын

@@dominicpatricio5408 Apologies for such a late response but the main code that was the problem was B1596

@CKBrutus 2 жыл бұрын

@@Sheeeeeeeeeeeeiiitt yup the wallet takes a hit on that one

@metalbob3335 3 жыл бұрын

I recently upgraded both me and my lady's vehicles I will be waiting for that review .

@bigmike9527 3 жыл бұрын

What?

@HouseCallAutoRepair 2 жыл бұрын

Working on a 2011 FX4 with the 3.5 turbo... What a pain! New caliper, new flex hose, but the new caliper drags. I SUSPECT the Abs module is restricting flow, but also have seen that a failed vacuum pump can cause this too (I have NO IDEA how) Just learning this system, but this makes little sense.

@Sheeeeeeeeeeeeiiitt 2 жыл бұрын

I’m experiencing this too however I have an 09 King Ranch. Module installed, the dash light finally gone but braking still mediocre at best…have you had the system bled at all?

@Suar5379 Жыл бұрын

Hey bro, ik it’s been 2 yrs since this video. But hoping you can help. I’m doing the same functions for the pmi, but instead of it configuring successfully, it says it can’t be done. And I bought cardones plug n play module This is on a 2009 f-150 with the 5.2 4x4 platinum trim.

@cj1613 3 ай бұрын

Any update

@DJ-tn7vj 3 жыл бұрын

Man bro. You beat me to the punch. Thinktool took me a while to get use to. Its really a nice tool for the price that I got it for.

@tonycastro6154 2 жыл бұрын

tnx,,i just did this same thing with a used one,,and i was able to program the new used from the old one,,,,just follow what you did,,i guess they are programmable,,,,,

@ADVANCEDLEVELAUTO 2 жыл бұрын

Awesome! I’m glad everything worked out!

@emmanuel7915 2 жыл бұрын

Thank you for wearing the mask 😷 I feel better watching the video

@mechanicandskills7215 3 жыл бұрын

is my thinkdiag the same as your pro scanner except i got the cell phone model ??

@ADVANCEDLEVELAUTO 3 жыл бұрын

Yes. Pretty much!

@mechanicandskills7215 3 жыл бұрын

@@ADVANCEDLEVELAUTO Thank you

@mechanicandskills7215 3 жыл бұрын

thanks so much hoping you do more programing videos just because i got a thinkdiag its really changed my shop

@adeniyiadeyemi3767 3 жыл бұрын

nail it. best automobile youtube channel

@fredsalter1915 3 жыл бұрын

7:27 Whoa! what was that flying object????????!!!!!!! LOL! Great video. Thank you for showing how to program this module. Plus, if you didn't do the IVD, what would be the consequences?

@daveyhogan5332 Ай бұрын

I have the 2011 5.0l 4x4 would control module lock up the driver pads. I replaced both calibers all pad all way around and both front brake hoses. And the front driver side tire is still locked up. The passenger side is a lot more loose. I'm having issues

@ruanfelipe3679 3 жыл бұрын

What happens when you don't have the old module?, recently bought the same style truck which has this abs lights problem, but I don't have the old, can you still program it ?

@3613jeremy 2 жыл бұрын

Most of the time abs lights are do to bad or dirty speed sensors hook up a abs reader first and if both the brake light and abs could be a simple low fluid or air in the lines

@davidwaters5348 3 жыл бұрын

Great video

@robotech1990 3 жыл бұрын

Thank's man. Really to the point.

@SMAutoRepairLLC 20 күн бұрын

Do you know if the snap on verus edge is capable of this PMI I have a 2009 f-150 5.4 and am not finding this in my scanner options. Thanks for your input.

@donwatson5862 22 күн бұрын

2009 ford brake and AB’s lights on does kick a code for the module , has power to everything can it just be reprogrammed instead of buying a $1000 module ?

@jimmydickson8854 3 жыл бұрын

Very good mate thank you

@williamGSXR110 3 жыл бұрын

Not really a secret. We do PMI to install modules at the dealer. The advantage we have with the OEM scan tool is we don't have to have the original module.

@therealdealtech8460 3 жыл бұрын

And last resort and the most loved by ford techs programming a pcm using as built data , and honestly sometimes i still dream about FFFF and more random codes, only ford techs will understand.

@Sheeeeeeeeeeeeiiitt 2 жыл бұрын

Either of y’all mind sharing your approach/experiences regarding bleeding/servicing the system once a module is installed? Lights on dash are gone but the soft/spongy pedal, poor bite is still there. Anything I should have done specifically? 2009 F150 king ranch…Thanks so much for any feedback.

@Zib187 3 жыл бұрын

This video came out at the perfect time. I have to replace the abs control module in my son's '06 Escape. I'm using a used unit and will be using the FORScan software to program it. Thanks!

@jamo7526 3 жыл бұрын

Hey how did that job end up going for you? Any tips on reprogramming the used unit?

@Zib187 3 жыл бұрын

@@jamo7526 Getting the old one out & putting the new one (used one) in was a little time consuming. I used ForScan to change the "As Built" data (no programming needed), which I learned from watching Tool Hut USA's video: kzfaq.info/get/bejne/eryJp7FjzrGwf5c.html

@Sheeeeeeeeeeeeiiitt 2 жыл бұрын

@@Zib187 when installing the new/refurbished module did you have any issues with air being in the lines? I’ve had my system bled twice manually at the tire shop due to brake pedal travel/not having strong bite. I then payed the dealership to perform electronic brake bleed via IDS ($270)….within a week the brakes have the soft peddle travel. As of late it feels like a caliper is sticking (like driving on ice, delayed acceleration/slower than normal from a stop. As I coast you can feel the truck slowing sooner..fuel mileage down. Had new pads/rotors on the front and new pads for the back done a year ago by the dealer as well. I’m going to look into Forscan and see what all diagnostics and services can be performed 2009 F150. Should have done this along time ago but assumed the learning curve would be hard to navigate.

@aman.aman.7991 Жыл бұрын

Great video thanks

@paulimendoza4998 2 жыл бұрын

Beautiful absolutely beautiful lol great video bro! Appreciate you 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽

@SUPERPHATBUBBALITE Ай бұрын

Hay can you please put the part number for the scan tool you are using here because the Amazon like in the description is no good.

@iaee6687 2 жыл бұрын

I have "Thinks can Max TK909" I have checked it multiple times but can't find the PMI function, what scan tool would you recommend I purchase with this function?

@topmonkey6512 Жыл бұрын

Hello, I recommend the Phoenix Elite from Topdon to you. I am also using it, and I think it is very good. The functions and coverage of the models are very complete. Here is a video of me using this device to replace and adapt the ABS module of the 2013 Ford Edge: kzfaq.info/get/bejne/Y9KGq86S2LGbdpc.html , you can refer to it, it may be helpful to you!

@diam12345 3 ай бұрын

Thanks for this. What do you know about this message, when I want to install a new Abs Module ? " Abs module not" with Ford escape hybrid 2008. Thank you very much

@GrandPitoVic Жыл бұрын

Do you have to program the modual even if using a used one from a junkyard car? From the same year.

@agodlyhome Ай бұрын

Yes

@edzanjero353 3 жыл бұрын

If an ABS module is replaced and not programmed, what would the behavior of the brake pedal be like? Do most scan tools do an "auto factory bleed" of the ABS module?

@nicksimon290 Жыл бұрын

Whats the answer

@nosoyono1081 2 жыл бұрын

I wander what would have happen if you just cleared all the faults on the old unit?

@gaelylesly 3 жыл бұрын

excelente video 👍 saludos desde el valle de texas

@anthonysalonek1509 3 жыл бұрын

Thanks Eric

@johncabinetman 3 жыл бұрын

My local mechanic extracted the files from the old ABS module installed a new module and when he tried to download the files it says the file is corrupt. He then tried to manually load a file and it wouldn't work either. Do you have any suggestions? Thank you.. Oh yeah we are working on a 2010 Expedition 2wd 5.4 liter. Please help.

@borgsimpson935 2 жыл бұрын

Am looking to expand my auto experience. Get video. I like and subscribe. Tired of getting dirty trying to learn more technical Knowledge. Going to check more out thank you.

@flightmedic7169 5 ай бұрын

I have a 2020 Lincoln Navigator that was in a collision and the steering rack has a dent where the module goes and my scanner tells me lost communication. Do you know what I can buy to program another one if I install it ? Thanks

@johnluehrs8011 3 жыл бұрын

Great pod cast I really like watching and learning how you diagnose car issues

@neilmurphy845 3 жыл бұрын

That is one very clever feature

@autoinfo9288 Жыл бұрын

Geart way u teaching us thank for sharing with us . Also I buy think tool pro I use on GMC many model when I connect vci to OBD port it's distarb the Can system on dash flash ABS and traction any many thinks distrab when I take it out VCI everything get normal did u face this problem withis tool ?

@skip741x3 5 ай бұрын

Things are sooo easy when you have the tools! wish there was a way to do this PMI process if you dont have a 700.00 scanner! ive heard it can be done with forscan trial software ,a laptop and an ELM scanner? i have those already but the defective abs module does not show options to program nor save its data , no abs asbuilt data shows... it has codes c1267 b1342

@davidche554 6 ай бұрын

Great video man

@cigaito1 3 жыл бұрын

Excellent Video

@faustogonzalez8397 2 жыл бұрын

Awesome Eric, great video thanks so much !!

@fjb666 2 ай бұрын

Good stuff. Thank you.

@yahiyahassan975 7 ай бұрын

Hi, I want to know which one is suitable for my ford expedition 2010/XLT/EL..MINE IS AL14-2C219-DA..and. this model not available.. what is the other model fit for my car

@yeahrightmate Жыл бұрын

So what happened to the THINKCAR THINKTOOL PRO Scan Tool, it is not listed.

@cliffharker2600 Жыл бұрын

Quick question. I have a Ford, 2 sensors are reading 12v at the sensor plug, 2 are reading 9v. The wiring is in tact. Is it the ABSModule that i need to have replaced or fixed?

@Oneupserviceautorepair 8 ай бұрын

hardest damn thing about this on a ford edge is plugging the old one back in while the new one is installed. it took me longer try to plug the old one in with the new one installed.

@skyport-it Жыл бұрын

Question - Odd my THinkTool Pros+ does not show a PMI for ABS as your Pro dos. Is that an additional purchase from them? I was thing the Pro+ would have all on Pro and more. Doing Ford E350 2008. Just replaced the ABS module. Still have the old one.

@randikalakmal 3 жыл бұрын

Excellent video as always!

@josephhannold3739 2 жыл бұрын

Hey I’ve been watching your videos. My son has a 2013 Ford Edge with ABS lights on. We replace the module and have the original. Does the Thinkdiag do the PMI function to recode the new ABS module?

@danielmarjanovic9957 Жыл бұрын

My question too…. Any luck on getting an answer?

@hughbunyea4703 5 күн бұрын

Replace the ABS module on a 2017 Ford P. Esta, because we thought it was bad. We replaced it with the used one that was good. And now the brake pedal won't come all the way up and the A. B s light is on

@PhillipBailey 6 ай бұрын

Do you know if you can perform a PMI on a used ABS module on a 2011?

@gabewhisen3446 3 жыл бұрын

Cool video

@JoeOberster 8 ай бұрын

Can the ThinkDiag bluetooth phone scanner work for this? I can't buy a big pro scanner like that one. Do I have to have any kind of software subscription to do this job? I'm jus a dude trying to reprogram my own ABS module.

@thecocreta 3 жыл бұрын

You are awesome, period!!

@nicholasneri1814 2 жыл бұрын

What kind of cheaper programmer that I can use to do my abs module on a 01 Ford F-350 7.3 what does the scan tool need to snag the info from the control module I have to the new one

@topmonkey6512 Жыл бұрын

@skip741x3 9 ай бұрын

I had to laugh and please, no offense meant , when the questioner asked if there was a cheaper programmer and the other commenter kindly suggested the Phoenix elite... Bro, that thing is 1,800.00! wayyyyy beyond the reach of most poor souls looking to do this on the cheap...

@hwsadberry6781 3 жыл бұрын

great info

@reneerogers9680 10 ай бұрын

Curious....will this work on a USED replacement module or only NEW/REMAN??

@ADVANCEDLEVELAUTO 9 ай бұрын

Works with used modules also

@steveviscount8566 8 ай бұрын

Can anyone recommend a scanner with tis function? There are so many of them out there hard to know what one will have the PMI FUNCTION.

@cj1613 3 ай бұрын

Did u ever get one with PMI

@stevenkietzke5582 3 жыл бұрын

Nice always learn something new

@keithpowers2421 Жыл бұрын

I have a thinkscan tool it’s just the Sf100 but it has abs function but it says I have to purchase software? I can get into the abs module stuff but doesn’t show PMI function

@ansarinaseem513 Жыл бұрын

Very very helpful video thanks bro

@judah0471 3 жыл бұрын

Hi Eric.....thanks for the video it looks very helpful I was wondering on that Scan tool how do I get to that particular page that you show on your video ? I just picked up the exact scan tool.... thank you for help.

@TonysTrailHawk 3 жыл бұрын

Alright bro, I'm interested in the scan tool, but can't find your video reviewing it. I'm currently running the Autel TS608 at the shop. It's okay as far as diagnostic and TPMS goes, but it doesn't do nearly as much as the one you have. I'm looking into possibly getting your scan tool because it looks like it does way more. Have you used it for Immobilizer programming or BMW footwell module?

@MrAnvilacres 2 жыл бұрын

Will this do that to a used module or does it have to be a new one?

@MrWayneclark29 2 жыл бұрын

This is what I am trying to figure out

@a1automotivelearn208 3 жыл бұрын

Good job Eric bro

@tyronecorbin9982 2 жыл бұрын

Morning I am here watching another of you very informative videos .I am from Barbados I have a 2007 three door Vitara and gettin GB some problems with it. The cluster works at start up and them stop working with the check light and ABS light on have you ever had this problem if so can you tell me what to do Thanking you.

@alexanderdavilamachuca2268 Жыл бұрын

! from puerto Rico

@michaelmurrietta2263 3 жыл бұрын

Very good video

@stevehabati6278 2 жыл бұрын

i have 2005 ford escape hybrid with ABS issue, we run the diagnostic and came up with the code C1475, i bought an used ABS for the same model, do i still have to do the same reprogramming procedure as shown in your video for 2008 ? or 2005 model has a different procedure for ABS control unit replacement. Please let me know what i should do, thanks.

@awudubannaf8608 3 жыл бұрын

Absolutely awesome video..... Thanks

@jamesmorris7596 2 ай бұрын

Does anyone know if the module has no communication can the new one still be programmed using the tool, or is there another way to program?

@2damend407 3 жыл бұрын

Why you got a face dipper on and your by yourself 😂

@darenhouser427 3 жыл бұрын

Why can’t you spell the word, Diaper?

@danielmarjanovic9957 Жыл бұрын

I replaced the abs module. No longer have the old abs part. Have this same tool. Is there a way to do a reprogram with the new abs module since I don’t have the old one to do what you did on this video?

@ADVANCEDLEVELAUTO Жыл бұрын

If you don't have the old module, then you will have to program the module using a J2534 pass thru device and a subscription to Ford FJDS. The scan tool can not do this.

@danielmarjanovic9957 Жыл бұрын

@@ADVANCEDLEVELAUTO how exactly is this done?

@wendellgreenidge3362 3 жыл бұрын

Awesome video

@thisisyourcaptainspeaking2259 3 жыл бұрын

Excellent, thank you! ;)

@FredyInjecar Жыл бұрын

Thank you so much you help me a lot appreciate

@ashrafalgadi7373 6 ай бұрын

Today i went through this procedure on the same car the only difference i installed second hand ABS module unfortunately it didn't work... (Module configuration failure) pops up on the scan tool.. Even though the programing succeeded..

@cj1613 3 ай бұрын

Did you ever figure it out @ashrafalgadi7373

@weshawkins7165 3 жыл бұрын

Excellent video. I’m wondering what the difference is between the ThinkTool Pro and the ThinkTool Pros.

@carmenjimenez8233 3 жыл бұрын

Disculpa está escáner nos sirve para modificar las Millas del vehículo ? Gracias por todo lo q me as enseñado.

@solarfall2728 3 жыл бұрын

Just curious as to what you do if you can't do a PMI? Could you connect to Fords website and access as built data, or do you need to use a factory scanner?