1 Million views! Thank you all so much!

Thanks not talking about nothing or how great you are for 20 minutes like all these other guys.

The most common problem is magnetic trash at the wheel sensor. Very simple fix - disconnect the wheel sensor at the brake. It is nothing but a magnet that moves as a cogwheel rotates with the wheel. Spray it with brake cleaner and reinstall. You don't need to change the sensor. The magnetic particles collect on the sensor when you drive in high water or wet conditions.

My 75 year old friend wants to give you a kiss. After all the work he did, the light came on. Thankfully I googled it and found your video. Not even a blown fuse, just resetting it cleared the lights that he was worried about.

Great video shows you how to diagnose and it doesn’t lead to just one problem but it shows you other factors that can cause the ABS light to come on 👏🏼

Great video and helpful, one small additional bit of information. Not all cars are four wheel ABS, some are only two wheel abs. it’s very helpful when you’re going to ask for a price and availability if you know what your car is equipped with.

Very educational it helps to understand how it works and things like the spacing into the hub and stuff

Reasonable, quick overview of ABS, without great detail. Thanks

Great simple straightforward advice 👍

step 1, remove abs fuse step 2, store fuse in glove box step 3, place small piece of tape over abs warning light :)

actually helpful! thank you so much. my cables been eaten up and two cables were kissing each other. once i wrapped them up individually, the abs light went away!

ABS light on (05 Blazer) causing a parasitc draw I cleaned the ground wire on the Rad frame And removed the butt connectors further down the line which had rust inside them ..Problem solved Saved myself from testing a module and calling myself a parts replacer

abs is good but for many years, from the beginning,we had no abs in any car. You don't have to have it to drive. Of course abs does add a slight degree of a safety.

I hope it is as easy as you make it look. Thank you.

Thank you for posting exactly what I needed to know

Great video, one question, all the abs sensors are check in ac current? Or there are others types of sensors that are check in dc current? Please let me know, thank you and cheers from Ontario ca,

Just info - some vehicles have the reluctor as part of the wheel bearing. In this case the new bearing has to be oriented correctly or you're back to where you started - no ABS.

Very good informational video for the specific problem,thank you. Pretty sad people are mocking the video just because they don't have the obvious requirements you need in this type of maintenance. Neither do I but now that I have the knowledge I can safely inspect and question the mechanics who do have the equipment to use.

Great video! Thank you so much!

Thank you for your video, I have 2002 Ford windstar , al the rear light not working, what wrong with? Please help me,thanks

You are a Prince among men!!! this has been befuddling me for a few days now ... I was also ready to dump the cash... but i got the van to throw the code...pulled over and listened to a podcast for 15 min then turned my van off and then on.... and VOILA the codes are gone!!!! THANKS A MILLION BRO!!!!!!

So informative,thank you

Thank You, I subscribed! I changed the fuse, and will drive it in my driveway to check it.

Thanks guys!

Very insightful! Thank You!

Really useful. Thank you. I have the basic tools & knowledge to follow what you have described, i just need a little time to get to the vehicle & check it over.

Great guide. I have a 87 Ford Scorpio (Granada mk3) and these days a lot of the suspesnion parts will be replaced. Like brake discs, pads and wheel bearings. The ABS light comes on periodically, often its off at idle and comes on when reacing a certain speed. Any tips what could be wrong? Ill will probably check each sensor the way that is shown in the video, but first Ill check the fuse.

i have a mazda 2 and feel a slight judering when alomost coming to a stop, from front right any ideas what that is and how much its likely to cost, uk.

I had my rear wheel bearings replaced, now my ABS light and Brake warning lights are stuck on. It really upsets me because if it's just sensors and not actual problems with the brakes, this useless stuff could run into a lot of money. Stopping back at the repair shop after work today. I hope they can fix this problem. My check engine light has been on for weeks and I was told it was just a sensor. I'm not rich to spend a couple hundered dollars on each warning light that happens to come on because a sensor is dirty.

Very helpful information. Now I know what an ABS warning light can mean.

Good vid! If you have time i have question. My 2005 Dod Grand Caravan has had ABS light on for a few years. Don't ask bout inspections:))) I finally need to fix this. Cost of guessing mount up fffast. I sent to Garage to scan looking for a direction as I had checked sensors and (rings), with no visible issues. They said pump ABS would not power, no codes for sensors. I removed battery and checked for power to plug on Module. 12 v and good ground to both heavy wired connectors. Top 2 positive, lower 2 ground I did the ohm check on all sensors they checked ok. Have power to plus side of connectors (close to each sensor). However i tried the connect sensor pins to meter set to A/C, spinning tire I get no current detected on any sensors. What I did not check while I had module plug off was pin 7 left side (holding the plug as it fits) is supposed to be powered as well. I guess i need to get up and close to wiring diagram. Any help/advice would be greatly appreciated. Best; Tom

Love these guys! I use them at least once a month and they have yet to fail me!!

Excellent information - Many thanks !

@2CarPros flashed. The flash light its still on, but can I ask you what you believe the problem might be? I tried again to flash the big lights it happened again, ABS flashed and car reduced speed.. I would appreciate if you can give me your advice

Perfect description for the code c1391. Cannot be better than this.

I like that clear Snap-On test light.

Another problem could be GROUNDING cables between the battery, and body, to engine, points. On Ford products these cables become corroded, or rusty. This causes poor grounding. Many other Ford vehicles have similar problems. Their bare metal woven ground cables corrode to the point of breaking. On my 2008 MKZ the Check Brake System light would come on as I drove out of my driveway. I checked fuses, and other pieces. Upon inspection of the two cables, one from battery, to shock tower, and another cable from engine , to the other shock tower were dirty, and loose. Using a jumper wire from the engine to shock tower mount, the problem was solved. Later , replacing the small bolts that attach the cables, to the body, and tapping the holes for, slightly larger, bolts, assured a much better connection.

Excellent video.

nice video! easy to follow steps

Nice tutorial. Looks fairly simple.

Hi on my Holden Astra 2002 there is ABS and traction control sign appears on dashboard. Even though I had changed its left wheel bearings and brake pads. When I apply brake and Stops the car at signal then if I accelerate the car it seems like tyres are jammed until it reaches the speed of 30-40. What I can do to fix things? Thanks

Very well explained, thank you!!!

Great video, It was simple and easy to follow. I have one question. What does the ABS pump sound like when it is running?

Thank you. It gives me an idea what the mechanic is checking

I have a B7 vw passat. 2 rear wheels not returning speeds. I have had to pull the abs fuse to disable the abs as the offside right front abs is activating at moderately low brake pressure. The rear abs rings and sensors check out ok.

Thank you 👍 bkeep doing what you do your helping people

Bery awesome !!!! Easy to follow steps 👌👌👌👌👌

Many thanks, for the information on ABS working system.

Great info and video!! Subscribed😊👍👍😊

Well explained. But can you explain on heavy duty trucks, say like Volvo fh12_fh13

Lots of good info. My ABS and brake light warning are not on, but at less than 5-6 mi/hr the anti-lock kicks in making it dangerous in quick stop situation. It started as an intermittent problem but no is constant. I have quotes of up to 375.00 per spindle to repair it. I know I can do it for less than that. when I pull the fuse the ABS and brake lights come on and stay on. The question I have is... If I unplug the ABS sensor at the spindle will it effect the vehicle in any negative way

excellent guide.

Thanks

Great video! Super easy and detailed

Very good information, after reading through some of the comments I realized there are some really stupid people out there, you made it so easy to check and you have people talk about how hard it is, but then when you look at most of the politicians that keep getting voted in office time and time again you start to realize that stupid really runs deep. Good day sir

I have this light on in my 2006 pontiac g6-gt,v6 3500,.along with that my traction control is on and as i checked it with some code readers they all from speed sensor curcuits and on both left and right in the front,..so i must try to do that and see, back yard mechanic mason,..thanks..

Great. Very helpful. Thanks

What about when you have intermittent steering issues and your calipers stick with no patterns? Nobody seems to notice a problem yet there's 0 volts going to my ABS module and a constant drag noise coming from both front rotors. I wish mine would throw a code.

Will check

That music is groovin'. Couldn't focus on repairing my car.

A loud noise(similar to vibrating phone) can be symptoms of abs malfunction? After several days abs Warning light on, does it mean that i have a priblem

I wanted to add that it could be your brake switch as well. My brake lights worked normal however my abs light was on. It actually turned on and off for awhile. But eventually stayed on and wouldnt turn off. I did have a code for brake switch light. I changed it out and my abs light turned off.

Nice work nice job

Excellent video thanks

Hello sir do u have any information about lumina 2000 model ABS faulty error , when I started my car and drive on the road, when I push the break paddle there is a noise it's like "tick tick tick" and on its screen there is ABS faulty error on the system

Great video!

Will sticking brakes cause abs and vdc lights. My 350z will suddenly (in drive) shift into low gear and come to a sudden stop when I let go the gas paddle. I can take my foot and lift the brake paddle and all seems normal. I can drive a few as long as I dont touch the brakes.

Can a change of the bearing cause the abs light to come on?

good job

I've also had the tone ring crack so it's no longer fimly attached to the drum and does not rotate consistently causing the fault.

On my Chevy pickup, I let it roll backwards down the driveway with the key on (not running) and hit the brakes. When I started it up, the light was out and stayed out. Play around with different sequences and see if this works on your vehicle.

Mine is a 15 Jeep Patroit and my abs/traction control lights both go on and off randomly. This seems to have happened following a near accident when I had to apply breaks heavily and my Jeep skidded a few meters. Could be coincendence not sure. No codes are found when I use a code tester. Can you point me in a direction?

The scanner doesnt communicate for abs codes and it is the right scanner for a 98 astro 2wd. Any suggestions?

Congratulations, now you have 1 million plus 1

My own tip : If it is a ABS module like the one shown Chances are the solder is cracked Or corroded You can open the lid after Carefully using a razor or thin blade to remove the rubber gasket seal. Items you will need : Solder gun pen tip. solder. Water proof/high temp chauking, Thermo paste for computers Remove the lid Heat up and remove any solder Then reapply one at a time Do not try to solder the smaller connectons as they are hard to do for people new to this Or without better tools for the job Clean any paste that was on the lid Reapply where the lip dips downwards and meet's the board Make sure your old gasket is cleanned off then apply new gasket ..install and test If it works .... You just saved $200 - $600 on buying one ... Another issue is Wiring after the ABS sensor line in the engine bay : Many car makes have wire connections with crimped butt connectors These in time do get wet and dirt And fail Find a Hanyes manual for your year and make Head to the back of the book for diagrams on electronics under ABS And you will find the color of the wires And where they go

Just had this issue after bleeding my brakes my wheels were rusted to the wheel hub so I assume I knocked loose a sensor. Thanks for the upload will check these out when I get home!

Thank you!....good for you...

Easy steps!

Just had a quick question if the back wheel is locking up and the abs is on what should I be troubleshooting

Thank you!!! It worked.

Both my rear sensors read 1750 ohms will that cause lights. 02 grand marquis

VERY GOOD VIDEO !

2006 suburban with stablitrak light on abs and brake light on also but brake fluid was full noticed charging system was 14 amps with air conditioning on

I have all dash lights on in the car when I turn the ignition and they remain once car is going ,any idea,and module maybe?

My ABS and Brake light comes on sometimes and when i shut off the motor and tap the brake a few times then it goes off. I checked the brake fluid and it's good. Please could you tell me what it is?

This was very helpful. I may just be a female and I have been treated horrible by many mechanics in my time, but i am also a female who knows alot about cars. My Grandfather was a mechanic and my father fixed all our cars when something needed repaired. And i was the parts cleaner and a very curious one to boot. Thinking this may help me in the future. Well yes and no..I was married for 25 years so when something was up and having issue with our cars I was very good at diagnosing the possible problem then my husband would fix it. Now that he has passed on I am again treated like I dont know what Im talking about . WHY IS THIS SUCH A PROBLEM ??

I got abs light on with code U1000 nissan titan 2004 I believe it's a ground wire not connected but I don't know where to look and I can't find a good wiring diagram any ideas.

Very Good information

Dig that lounge music too! 💯

Thanx for the info. Very informative clip !!!

Good Job Men i have a 2011 Navara st d40 and the right rear abs sensor is leaking not bad just tiny wheep whats your thoughts on changing the o ring or don:t they have one Thanks

6.7 million views...awesome...it helped me too! Thanks!

Does this go for stabilittak?

Although this was a very detailed video. Steps 2&3 are not EASY fixes for the every day driver. Thanks for the video.

5.3 million views on the abs light. Congrats

Many older rear wheel drive vehicles have a single abs sensor located on the differential housing using 3 sensors total.

thanks for the video, if the diagnostic is reading changes in 3 out of the 4 wheels except one which is stuck on a fixed number. I changed the wheel sensor and still . this happened after a hit to the right front side of the car what could it be?

Where is that modular located on 2006ChevroletSilverado HD4x4?

hi I have a ML55 AMG , While driving normally or on a bumpy road the EPS, ABS, BAS, Brake light come on with beeping sound. the steering feel a little tighter and the beeping sound stay on until I park the car and turn off the car. after turn of the car and restart it's work fin

And that component costs ONE MILLION DOLLARS!