Thank you so much!!! You probably saved me $100.00 or more!!!!! Took like, 20min to repair. Much appreciated friend. Peter
@bryanbrashears27173 жыл бұрын
Awesome video. I purchased a used Aeron over the weekend, and the adjustment to help the chair lean forward is broken. This is very helpful.
@edwardwilliams34985 жыл бұрын
This video helped me fix a chair I purchased today. Thank you for taking the time to make it.
@guinsfan874 жыл бұрын
It was a 3 minute video, just change the playback speed you psycho
@DavidNPS4 жыл бұрын
Thank You for Posting this!!! I finally decided to google repair options for my fave Aeron chair. This is just whats wrong with mine. Ive been stuffing pillows under the seat but they always slide out the back... I hope my repair is as simple as yours. On my list to try tomorrow.
@MaureenDunlap9 жыл бұрын
I have the opposite problem. Mine won't tilt at all. It seems to be stuck in the upright position and the levers don't do anything.
@KroMeMWGz3 жыл бұрын
Mine just started doing this and only had it for two weeks, was there any way you was able to resolve this?
@MatthewMcClellan4 жыл бұрын
Thank you for this, very helpful.
@nwramsey9 жыл бұрын
Thank you, 5 minutes and totally fixed!
@bariswheel9 жыл бұрын
This is exactly my problem, will try this out shortly and report back. Thanks for sharing!
@BreonNagy9 жыл бұрын
I'll try this tonight. Thanks!!
@jacksonc3877 Жыл бұрын
This may have been made 8 years ago but it helped me out today and I fixed my chair
@Dee04263 жыл бұрын
Great tutorial! Thank you
@georgesmith46395 жыл бұрын
Great video. Very useful. My tilt locks and stays locked until you get up off the seat at which point the tilt unlocks, requiring you to lock it again once you sit down.
@barrynbreen3 жыл бұрын
Mine was broken, the tilt gear part was 20 euro on eBay and easy to replace. But I first scrw a tech screw to join it and worked wonders for a while
@cameltroop9 жыл бұрын
Can you make a video on installing the forward limiter please?
@turboslag7 жыл бұрын
Same fault has just happened to my Aeron, hope it's the same fix! Also, the arms on mine gradually slide down the adjustment guides, the finger wheels don't fully lock them.
@hubert3039 жыл бұрын
Thanks, I just fixed the tilt on my chair after putting up with it being broken for 10 years. But why is it even necessary to undo the 4 screws and remove the seat? It's possible to take the cover off the box in the middle and access the tilt chain without doing this.
@spacefightertzz3 жыл бұрын
I came to figure out why the heck do chairs sometimes it tilts and sometimes it doesn't. And I just figured out my chair. The lift/drop lever is also the tilt lock, just had to pull it outwards instead of lift/drop. I just got my chair today and was already wanting to throw it away, but I got it figured out now. edit: yup this video helped me. I didn't know chairs have a tilt lever.
@ghita23743 жыл бұрын
i just bought a chair too. and spent 30 minutes trying to understand why my chair tilted first and doesn't anymore. I didn't understand why from the video but your comment helped a lot so THANK YOU SO MUCH.
@zm71609 жыл бұрын
1:50 you make this look soo easy. I'm struggling to make any head way. I even have those same tools. Seriously what is the trick with the clips, can you show some more angles of the actual clips and top cover?
@neurofunkx4 жыл бұрын
If the tilt is locked, rotate a lot the + / - knob, a lot until it unlocks
@stevepolychronopolous60938 жыл бұрын
thanks for the video, but with my aeron I can't tilt back at all, it seems to be locked. what do u think? thanks
@BrotherhoodManliness6 жыл бұрын
thanks!
@Sylphadora6 ай бұрын
I got a second hand Aeron and think the tilt is broken. Is it very common for the Aeron tilt to break?
@mwahlert8 жыл бұрын
I just bought a 2003 Aeron size B. The tilt tension adjustment does not seem to work. Any tips?
@NaturallyMe2278 жыл бұрын
what if the little plastic pen is broken? is there a replacement part?
@zkmoonea4 жыл бұрын
my size C has a very very tight tilt limiter lever. which part of my aeron do you suppose had gone bad?
@billsullivan67738 жыл бұрын
facing same broken pin issue-is there a company that sells parts for the chair?
@Spec1aLisT245 жыл бұрын
My tilt is fine but it won't hold its integrity, any1 know the fix?
@ikilleduku7 жыл бұрын
can you tell me what screwdrivers i need for this
@grambo19808 жыл бұрын
Mine issue is slightly different. it will lock but if i put to much weight on the back it will become unlocked giving you a real OH crap moment! Good to know about the pin and how this mechanism works.
@jayscott10638 жыл бұрын
+Neil Graham I have the same issue.
@otherwhere84926 жыл бұрын
Mine is the same, did you find the fix?
@birther19682 жыл бұрын
do you know where i can get a hip pivot bolt for the chair
@Ghostzy014 жыл бұрын
Is there a way to install front tilt one a chair without it?
@bulbeye9 жыл бұрын
Good video, but can be done without the removal of the seat in 5 mins tops. Problem I am having is that the metal part keeps sliding off the plastic pin so I have to rinse repeat the same thing over and over again. I did not have any clamps so I decided to use some superglue to make the PIN thicker on on end. So far it hasn't come off again :) Great vid tho, thanks for sharing this!
@EliteOnTheBeat4 жыл бұрын
Great idea however if I was to do this I would highly recommend using super glue instead its less mess and much stronger and will last much longer. Your comments 4 years old I DOUBT it lasted that long but I could be wrong? Feel free to chime in? ;)
@AugustDreamScape3 жыл бұрын
I have rhe killabee gaming chair but almost no videos exist of showing how to repair tilt thing. Mine is 2 weeks old and the tilt give out, so I can lean back at will without fiddling the lock. This makes for a terrible chair. Any idea of repairing is simular to ass seen in this video?
@carsoncunningham51664 жыл бұрын
Thank you so much for this. Just fixed my chair. Have to vent for a second though because my pin keeps coming undone! Can't believe they give this chair all these accolades for engineering and design.
@Sylphadora6 ай бұрын
Same! You'd think a $1,800 chair would be better designed. What a disappointement.
@shento2edgy1837 жыл бұрын
Hey guys as I tilt back and forward there is a point where it wobbles. Anyone else know a fix for this?
@PuneetMehra3 жыл бұрын
What type of wrench / Allen key do we need to open the screws?
@maxliu11513 жыл бұрын
same question, I tried 6mm but it is too big and 5mm is small
@boGardoN4 жыл бұрын
i can't, for the life of me, turn those screws...any ideas?
@mellingmichael7777 жыл бұрын
The guy makes it look easy.
@dummkompf6 жыл бұрын
everything he did in the video is extremely easy, lol
@jameswilber518 Жыл бұрын
"you need a (mumble,mumble)" After carefully listening I hear, "allen wrench". What size? Metric? SAE? After that I moved on to a different how to that actually told me what I'd need.
@tinostarks9 жыл бұрын
hey my chair locks on back tilt but it doesn't save its position...everytime I sit on it I have to set it...I feel like it didn't come like this...can I repair this like in your video?
@rickypang17566 жыл бұрын
yeah same, u find a solution?
@Spec1aLisT245 жыл бұрын
Same
@andrew.turner3 жыл бұрын
no
@stevepickett1025 жыл бұрын
I noticed your chair has only the rear tilt lever but has a slot for the forward tilt lever. Mine is the same. Do they make chairs with different tilt options? Every photo I see of the chairs online show them with both levers on the tilt side for forward and backward tilt.
@ClassicalGuitarYoutube5 жыл бұрын
wondering the same.... just purchased one with only the rear lever tilt
@stevepickett1025 жыл бұрын
@@ClassicalGuitarKZfaq I found out they are made with 3 options. Ours doesn't have the forward tilt option, but the arm brace still has the slot for the hardware. It's normal.
@ClassicalGuitarYoutube5 жыл бұрын
thanks for the info. I wonder if it's possible to install it?
@bL3dbL4k11 ай бұрын
Yup. Mine didn't come with either cable/handle on the left side (locking tilt/forward). But it has the option to install it. I might install it. Forward tilt I'll probably never use but might use the locking one.
@lorefreedom63864 жыл бұрын
Mine is new and I feel like the chair is tilting forward making me feel like I’m falling forward out of chair
@KidDynamite404 жыл бұрын
forward title is probably engaged?
@TheJimau9 жыл бұрын
how do you replace the piece if the pin is broken?
@bariswheel9 жыл бұрын
ajsuited you'll most likely have to order it from Herman Miller, give them a call and let them know you know exactly which piece you need. Hopefully they'll sell directly to the customer.
@TheGreatUtopiaCat7 жыл бұрын
if the pin is broken what do lol i don't have a metal lave
@barrynbreen3 жыл бұрын
New black part that rotates. Same as me. I'm gonna try super glue it first
@shawndayvis61694 жыл бұрын
seems like you could ha e screwed or unscrewed everything on your own time....hard to watch....