Honda Civic EK9 CTR Minor Refresh - The Final Result (Episode 4)

Рет қаралды 35,076

2 жыл бұрын

In this episode of this series, we are wrapping this refresh series by replacing the exterior moldings including window frame moldings, bell moldings and sash moldings. Refreshing the shift linkage by replacing and lubricating the shifter assembly. Spoon Sports shift knob was also installed. We then finished the project off by removing the faulty aftermarket exhaust system with an excellent used OEM exhaust system.
Special Material:
Meguiar's Ultimate Quik Detailer 24oz - amzn.to/3oASZZl
Microfiber Cleaning Cloth - amzn.to/3BuDYfa
CRC BRAKLEEN Brake Parts Cleaner - amzn.to/2WNq353
Genuine Honda Urea Grease - amzn.to/3iDvhbc
B'laster 16-PB Penetrating Oil - amzn.to/3oEoT7A
Tool:
Milwaukee 3/8 Impact Wrench M18 - amzn.to/3ugHcAa
Milwaukee 3/8 Variable Ratchet M12 - amzn.to/3kMRlSm
Milwaukee Magnetic Flood Light - amzn.to/3icv5PP
Milwaukee 1/4 screwdriver M12 - amzn.to/39KuDU
Our Filming Gears:
Go Pro 9 - amzn.to/3CKUuYO
GoPro Media Mod - amzn.to/3oc0SnT
GoPro Light Mod - amzn.to/3i77MXR
Canon M50 - amzn.to/3CN2I2L
Canon EOS M Mount Adaptor - amzn.to/2XW7xIp
Canon EF 50mm - amzn.to/2XW7497
Canon EF-M 22mm - amzn.to/3CPN9XV
Canon EF-M 11-22mm - amzn.to/3m1Dx5Q
Integra Type-R Build Project - SpeedFactory Detent Springs
• Acura Honda Classic In...
Vendor:
VelocityShop.com
velocityshop.com/
H Motor Online
www.hmotorsonline.com/
Spoon Sports USA
spoonusa.com/
As always, tips and tricks come standard on every episode.
For Acura Honda Classic Apparels and Merchandises:
acurahondaclassic.com/
🔔 Subscribe for more free KZfaq "Tips and Tricks": / @ahcgarage
If you have already, please follow us on Instagram to see sneak peaks ahead of time!
Thank you to our exclusive sponsor: Acura of Pembroke Pines
www.acuraofpembrokepines.com
Follow us on
Instagram: @AcuraHondaClassic
Facebook: Acura Honda Classic
Acura Honda Classic established in 2018, is a group of Acura/Honda enthusiasts set out to bring together the car community through Acura/Honda vehicles of the 80s, 90s and today. We strive hard everyday to "Building Our Community". Follow us on IG @AcuraHondaClassic to stay up to date on our news, events and activities.

Пікірлер: 105

@ahcgarage 2 жыл бұрын

For AHC Garage Apparels and Merchandises: acurahondaclassic.com

@GS-sm3jo 2 жыл бұрын

You two work so well together. True Honda teamwork and such respect for fellow associates. Soichiro would be so proud! Thank you AHC🇺🇸

@ahcgarage 2 жыл бұрын

Thanks a ton!!

@dillonrio7330 2 жыл бұрын

I was thinking, "Fujitsubo. Thats still a nice axle back." Mike, "Its a party in there." 😳😂 These are my favorite videos. The series style ones. I look forward to next weekend.

@ahcgarage 2 жыл бұрын

Glad you like them! Thanks for always tuning in!!

@HamBawlz 2 жыл бұрын

You guys ever considered dry-ice blasting the bottom of these cars? That would take the restoration to the next level.

@ahcgarage 2 жыл бұрын

We definitely have. The equipment is very pricey. Hopefully we can get one in the future. Thanks for the suggestion

@easye47 2 жыл бұрын

These videos are very therapeutic.. All she needs now is a nice dry ice clean and interior detail.

@ahcgarage 2 жыл бұрын

Agreed! Dry ice equipments are quite expensive. Hopefully we can get one in the near future

@davidhodges7674 2 жыл бұрын

Always look forward to these refresh videos. Great work as usual.

@ahcgarage 2 жыл бұрын

Thanks again!

@jeffgoh3675 2 жыл бұрын

Always a joy to watch you guys work on such a gem

@ahcgarage 2 жыл бұрын

Thanks for watching

@jimmyyking 2 жыл бұрын

That ek is looking so good brother. Man, those little details just add up and makes it look so much better. Well done 👍

@ahcgarage 2 жыл бұрын

Yes it does! Thanks for watching!!

@davidbeverly3463 Жыл бұрын

I❤️Honda! Had to go back and watch this series! A1 work bois! I'm about to start a 96spec B18C TypeR swap into my 97 EK coupe and seeing a few things I may do from ya'll on top of timing belt, tensioner, water pump and several new seals b4 install. Thx for all the great content and how tos n tips!

@Bill_XYZ 2 жыл бұрын

Watching this channel is like meditating. Great job!

@ahcgarage 2 жыл бұрын

Wow, thank you!

@realmccoyarmada 2 жыл бұрын

Good stuff. Was planning on doing this to mine too, you guys hit the spot! Keep these vid coming! 🔥🔥🔥

@ahcgarage 2 жыл бұрын

Thanks for watching

@jimvalerio6647 2 жыл бұрын

Awesome !! I was looking forward to today's episode, great work guys.

@ahcgarage 2 жыл бұрын

Thanks for tuning in 🙏🏼

@motorvlogmx8837 2 жыл бұрын

Great job. Relaxing. Imo the OEM shift knob is nicer, but that was client decision.

@ahcgarage 2 жыл бұрын

Thank you!

@mushy18100 2 жыл бұрын

Too sad the Spoon Ti Shiftknob has been discontinued years ago. That would add cherry on top for the refresh.

@ajsti2484 2 жыл бұрын

Great Update! Love those OEM pieces!

@ahcgarage 2 жыл бұрын

Glad you like them!

@prm5798 2 жыл бұрын

I love that you put the oem exhaust back on!

@ahcgarage 2 жыл бұрын

Love the sound of the Oem exhaust and the aftermarket muffler is coming apart internally

@therealjeeves Жыл бұрын

what a ride, nice one dude!!

@JohnWD40TC02 2 жыл бұрын

Great final episode guys, the old Civic is in excellent condition for it's age and the interior is very clean, I used to hate fitting exhausts when I looked after my own car all those years ago, I remember using axle stands laying on my back struggling with seized up bolts, that was no fun but now I've been cured from that infliction even got meds for it 😂 so these days I chuck the car in the local garage 😎😁👍 John

@ahcgarage 2 жыл бұрын

Thanks a lot John 🙏🏼

@frankiev116 2 жыл бұрын

Man the last EK9 video on your channel? 😭😭. Loved this series, staying tuned for the next one 🤙🏼🤙🏼

@ahcgarage 2 жыл бұрын

More to come!

@fourdoormafia 2 жыл бұрын

I'd love to see a 96 spec Integra type R get a refresh. I just picked one up in Washington state and I'm doing it to mine.

@ahcgarage 2 жыл бұрын

We love to do one in the future

@abdullah_fardm.9725 2 жыл бұрын

1:46 It's good that your Dealership aligns cars with aftermarket suspensions. Probably none in California do. The local Motorsports shop every time that I've checked, has a month wait time to get one. 5:33 Thank you AHCG, so that's how I can change mine too. I have new parts for both sides new, because the paint is cracked, ugly, and impossible to properly wash, and dry. The cracked paint is jagged, and would damage my fancy wash mitt, and microfiber towels. I've been washing, and drying around them.😆 8:08 I also have new side mirrors.👍🏾... 8: 06 I noticed that it doesn't have a weather seal between the door, and door panel. It probably stinks because it doesn't have that, and all the water, and rain has been getting on the door panel, and making stinky mold. You'll have to tell the owner so that he can give the okay to you cleaning the mold off, and installing a new weather seal. It's like a thick piece of plastic . 11:40 Both door panel weather seals are gone. 13:10 I have also have a new rear view mirror that I'm going to install, and a Broadway mirror.👍🏾 The old one easily faces the ground after a little bit of bass from a mono amp and sub.

@mickbrown8249 2 жыл бұрын

Ek 4(uk) 99' Vti cost lots for all resto bits & upgrades so far fitted,window trims & new rubber seals stored in house thanks guys for this help today .. nice Ek 9 i know many things different on my B16a2 but similar..

@ahcgarage 2 жыл бұрын

Right on!

@touringteg 2 жыл бұрын

Very nice guys. I still need to order belt moldings for my ITR. I did a full JDM exhaust and got all my heat shield cera. coated including header and cat shields. I repainted the JDM OEM muffler. Keep it up!

@ahcgarage 2 жыл бұрын

Thanks for the continued support. Grab the new Oem parts while you can. Keep up with your ITR!! 👍🏼

@ChrisHondaProductions 2 жыл бұрын

🔥🔥🔥🔥 you guys are true artists !!!!!!

@ahcgarage 2 жыл бұрын

Thanks a ton!!

@danthaman7777 2 жыл бұрын

I love this channel so much

@ahcgarage 2 жыл бұрын

Thank you, Cheers!!

@callangouger8696 2 жыл бұрын

lol whoops you missed the sound clip at 8:33

@inerceptor 2 жыл бұрын

Someone’s feelings will get hurt most definitely.

@ahcgarage 2 жыл бұрын

Revision has been submitted. Should have revised very soon. Thanks for the heads up

@rhiickmotoventure1628 2 жыл бұрын

Period correct project ❤️

@ahcgarage 2 жыл бұрын

Cheers!!

@juanesquivel5903 2 жыл бұрын

Great job 👏

@ahcgarage 2 жыл бұрын

Thank you! 😃

@garazis-theprivategarage3780 2 жыл бұрын

i love it, thank you for the vidio bro, i do have the ek9 also, but spoon yellow

@wickedsatan1 2 жыл бұрын

Great stuff. Requested earlier, requesting again. Kindly share OEM part numbers in either video or description. Thanks

@ahcgarage 2 жыл бұрын

Noted

@carlosochoa8824 2 жыл бұрын

Thank mike

@ramonbriones4487 2 жыл бұрын

Nice!

@bgivco 2 жыл бұрын

Sweet !!

@ahcgarage 2 жыл бұрын

Cheers!!

@davidsocherman3744 2 жыл бұрын

Saturday is for the boys

@ahcgarage 2 жыл бұрын

Heyyy!!

@carlosochoa8824 2 жыл бұрын

Door mirror with manual side view can you give me the link where I can buy it or the part number for my Honda Civic hatchback that I am renovating

@JamesJonahJameson-MM 2 жыл бұрын

Hey AHC, Do you have a company which you would recommend that sells OEM USDM or JDM bronze/gold windows and windshields for the 92-95 hatchbacks? I have a big chunk of glass missing from my OEM windshield and I’m not sure it can be repaired.

@Sebastian_1984 2 жыл бұрын

👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

@juanesquivel5903 2 жыл бұрын

I'm down here in Florida for a week , staying at Melbourne FL. How far are you guys from there?

@ahcgarage 2 жыл бұрын

You are about 3 hours away from us. We are in South Florida

@carloapalis 2 жыл бұрын

Where are you able to source the moldings? Every where I looked its discontinued

@ahcgarage 2 жыл бұрын

We should be able to source it for you, shoot us an email: AcuraHondaClassic@gmail.com

@jonathan2fast4u 2 жыл бұрын

nice video li ke the other...but it will be fantastic if at the last video of the restoure u make a price list of all the items that u have use

@ahcgarage 2 жыл бұрын

Noted!!

@onixtorrellas8486 2 жыл бұрын

Hey guys, I got a 2008 Acura TL type s 6 speed manual, I would love for you guys to take it, and give it some tlc on the show…

@Garcia1356 2 жыл бұрын

These part number should be the same for a em1 right?

@ahcgarage 2 жыл бұрын

For the most part, yes.

@yzefeeRz 2 жыл бұрын

Nice work! Is the EK9 street legal in the USA? :D

@ahcgarage 2 жыл бұрын

Some are

@luisamoa2500 2 жыл бұрын

What happened to the missing vapor barrier on those doors, you never replaced it? First rain storm on that thing and water is coming in for sure. @ 11:42 it's missing completely

@Patrick94GSR 2 жыл бұрын

Most likely not available anymore. I tried to get new ones for my Integra a couple years ago but could not source them. Maybe this car doesn’t see rain.

@hoopla1414 2 жыл бұрын

Is the EXHAUST you took off the ek9 for sale?

@ahcgarage 2 жыл бұрын

Reach out to @rhdgerm

@ek9si 2 жыл бұрын

Very nice car I don’t care if it’s rhd it’s hard enough to find a nice ek

@ahcgarage 2 жыл бұрын

Facts!!

@cedriccope178 2 жыл бұрын

Now that's how you do a refresh😍 now what's up with that Mr em1?

@ahcgarage 2 жыл бұрын

Good question! We have something good coming up on the MR EM1

@cedriccope178 2 жыл бұрын

@@ahcgarage yesssss the Mr em1 is my unicorn

@ahcgarage 2 жыл бұрын

Us too. Stay tuned my friend

@zurc619 2 жыл бұрын

looks like jon needs to make a deposit to his office

@ahcgarage 2 жыл бұрын

Ha! Yes!!

@HobbyTimeSeattle 2 жыл бұрын

Should have stripped the aftermarket black paint off the muffler first. Otherwise it's a pretty nice OEM exhaust setup. Great job as usual guys.

@ahcgarage 2 жыл бұрын

Thanks for watching

@uoykcajssa 2 жыл бұрын

all that attention to detail, why no fresh vapor barrier?

@Patrick94GSR 2 жыл бұрын

Probably not available. I can’t get them for my 94 Integra.

@ltatjsallday8709 2 жыл бұрын

I'm sure they only pay attention to their show cars, To customer they probably cut corners like every other lazy autoshop

@Patrick94GSR 2 жыл бұрын

@@ltatjsallday8709 why would you say that? The car in the video is a customer’s vehicle.

@Rhdgerm 2 жыл бұрын

@@ltatjsallday8709 I’m a regular customer . That’s my car … I meet Mike at a AHC meet in Orlando FL and wanted him to help with my build. They don’t take short cuts. My car is running smooth and amazing after everything. I would send anyone to him. Every car gets the same treatment by the AHC team