No video
Subaru OEM Front Lip Spoiler Installation 2020 STI
Рет қаралды 34,804
Күн бұрынSee a detailed front lip spoiler installation in a 2020 Subaru STI. I show you what you get in the box and how to install it easily in your own garage in minutes. This specific installation applies to 2018+ model years of the WRX and STI, but the install is similar in previous models.
This is the lip installed (E2410VA030) →→ amzn.to/3d2b4Gr (be sure to shop around for best prices)
Side Skirt Install → • STI/WRX Side Skirt Ins...
Tools you’ll need:
Ramps →→ amzn.to/2Yz1NR0
Cordless drill
Drill index (5/32, ¼, 3/8 OR 3mm, 6mm, 7mm, and 9.5mm)
Punch tool
Phillips Screwdriver
Clip removal tool →→ amzn.to/3fmCVCK
Electrical Tape
Microfiber Towel
__________________________________________________________________________
→→Check out my MERCH! →→ boostshutter.m...
→→ www.amazon.com... This is my personally curated list of fantastic car products. Many of these you can see in my KZfaq videos. Be sure to read the comments to see why they made the list!
__________________________________________________________________________
If the video was useful, give it a "thumbs up" and consider subscribing!
Subscribe to Boost & Shutter → / @akqjtn
Instagram → / boostandshutter
Facebook → / boostandshutter
Twitter → / boostshutter
__________________________________________________________________________
Links above may be affiliate. As an Amazon Associate I earn from qualifying purchases. Using these links costs nothing more to you. I will always provide my honest opinion about the products I use and acknowledge any sponsor.
__________________________________________________________________________
Thanks for Watching!
#STI #WRX #SUBARU
@WeAreLeviticus 4 жыл бұрын
Bro the quality of this video is amazing. Great camera angles, great tips, no BS talking into straight to the point. Easiest sub, like and notification bell Iv ever slapped
@guitarmon5765 Жыл бұрын
the tapping process is really important trust me.and thanks for the detailed video, I couldn’t finish it without this one
@TheDiolulaLife 5 ай бұрын
The best on KZfaq!
@Mskaterkid2 4 жыл бұрын
This was by far the best installation video I think I've ever seen. Keep it up!
@jayenriquez3727 2 жыл бұрын
It looks good! A front lip is a must in all STIs. As it doesn’t line up with the rest of the body kit if you look at it from the side
@MrGodfreyC 3 жыл бұрын
I really like this front lip
@akqjtn 3 жыл бұрын
Thanks I do too!
@manishchachra 3 жыл бұрын
Appreciate you helping the community at large. How'd you learn to do all this? haha. In any case, great video and I appreciate all the useful tips, especially the black tape on the drill bits. Made life much easier. Great looking lip, too, diggin' the OEM quality/fitment. Hope you're enjoyin' your car! Looks sharp. :)
@akqjtn 3 жыл бұрын
Hey thanks for watching! Hope your install went great.
@manishchachra 3 жыл бұрын
@@akqjtn all good, thanks. Watched this video a few times, for sure! Cheers!
@gilbertmiro6918 3 жыл бұрын
Thanks to your video, I bought the front lip spoiler and the side skirts for my 2019 Subaru STI.
@jamal3121 3 жыл бұрын
Dude, this was such a good install vid. No wonder the factory lip is $400
@paulmarsdensr1095 Жыл бұрын
A great video brother. Very attention to detail oriented as always. I will get this lip from Irvine Subaru out here in Ca. That STI under spoiler looks great but i cant justify paying 500.00 dollars for it. Stay safe and Subies forever.😊
@paulmarsdensr1095 Жыл бұрын
I really like the look of this front lip alot.
@paulmarsdensr8199 3 жыл бұрын
That front lip looks good. Great video.
@Tonyromeo1970 4 жыл бұрын
Best looking front lip IMO
@JStockinger 2 жыл бұрын
Thank you for this install video. It was perfect and straight forward! Just install my lip today.
@gsgleason 3 жыл бұрын
Fantastic video with great camera work and narration. Thanks!
@Stigness23 2 жыл бұрын
Thanks so much for this video, installed mine today with your instructions!!!
@esemteckreal4873 2 жыл бұрын
I need to buy that body kit. Amazing video
@Jewishcatfish 4 жыл бұрын
That does look nice and great install vid thank you!
@K03sport 4 жыл бұрын
Nice video. I'm not a fan of the OE lip because of how it rises up on the sides to the wheel well. I wish it stayed flat or straight across w/o the side portion or shoulder. I know that it aides in attaching the lip to the inside of the lower fender, but still not a fan. I'm not a fan of the STi side skirt/rocker extensions or rear spats either because of the same issue. The HT Autos [V3] or Verus designed lips/splitters, extensions and spats are more my speed as they do not rise up and over the bumper or rocker panel.
@K03sport 4 жыл бұрын
@@akqjtn...don't get me wrong, the OEM STi stuff still looks nice (and should be included std on all STis, not just special models)... It's just not in line with my vision.
@jcesparza7490 2 жыл бұрын
Love it, have the same color really digging how it looks.
@buildingconfidence1465 3 жыл бұрын
Very helpful man! I just installed mine following your guide. Thanks!
@romansh6737 3 жыл бұрын
Thank you! I used it us a guide for my car!
@mikecorvasce7074 4 жыл бұрын
Great video man so informative and detailed! Thanks brotha!! 🙏
@bad_puppy_6740 4 жыл бұрын
Nice detailed work!
@gilbertmiro6918 3 жыл бұрын
Looks awesome! Great video.
@Mr20564 2 жыл бұрын
Thanks
@dplurlights4331 4 жыл бұрын
Awesome video man! Do u plan on making videos for the side and back lips??
@joeyromaniello1200 3 жыл бұрын
Great video - thank you!
@Oscarcode1033 4 жыл бұрын
nice looks great
@donAKAthedonjp 4 жыл бұрын
Man, I hate you!! Haha! I was 50/50 on them but now I'm all in on getting it. Looks great!
@SonikJesus 8 ай бұрын
Does anyone know the sizes of the well nuts and bolts? Also, is there a part number for the two wheel well clips? I want to install an OEM lip I got without hardware. I know I can use self tappers or bolts and washers but would prefer to do it OEM style.
@heavygruff Жыл бұрын
where did you get the licence plate holder? all i can find is the relocation kits
@L1qu1date Жыл бұрын
I heard these have problems down the road (they get loose etc), did u experience any of this?
@Menace_sti 4 жыл бұрын
Dang thats is such a great install video. You tell it so promptly and i wish i was on ur lvl with install videos lol.. you won a sub from me!!
@Menace_sti 4 жыл бұрын
@@akqjtn i will most certainly haha just need an idea book to right stuff down lol. Or just keep buying parts and talking about them
@ZachKateAda 3 жыл бұрын
I have a 2017 Subaru Impreza Sport sedan and have been looking for a front lip but don't want the STI logo because I don't think it would make sense but that's just me.
@kristennizzaro7305 3 жыл бұрын
Real nice 😍
@michaelhernandez1398 3 жыл бұрын
What do you think looks better this OEM lip or the MP style one on the WRX. I like the more subtle look of the mp style the Subaru one looks a little too aggressive to me.
@Scatpack_Trooper_392 Жыл бұрын
I can’t see a make spot on my STI 2020 🤨
@triniman13340 4 жыл бұрын
Great job.... seed you got the STI
@jgzero18 3 жыл бұрын
Will adding the front lip or even the side skirts take away from the ground clearance of the car? I’m just wondering about snow
@michaeldominiquez7253 3 жыл бұрын
How did you add that red tape to your grill and on the emblem
@smnihal7440 4 жыл бұрын
Do you know where I can get those rubber filling for the lip gap?
@maxa.759 3 жыл бұрын
Front license plate bracket? is it tilted? TA
@dylanbagona4031 2 жыл бұрын
Do you know where can I get this push clip 4:24
@jacobmartel2468 3 жыл бұрын
Uh I fucked up drilling the hole by the wheel and did 3/8 instead of 1/4
@akqjtn 3 жыл бұрын
Just get a different clip, there are lots of cheap kits an Amazon
@AoiKaze2000 4 жыл бұрын
Do you have the JDM splashguards on? If so, are you thinking about going with rear spats?
@AoiKaze2000 4 жыл бұрын
@@akqjtn Wait, that's USDM splashguard (not the JDM ones - they're actually a bit bigger). Either way, if you do decide to do a pair, I'd be interested to know how you plan on mounting, and what you plan on going with. The downside with either is that they change how you can mount a spat so it becomes a rather... interesting... exercise in creatively mounting the spats. For those wondering what I'm talking about: USDM Splashguard: www.subispeed.com/2015-subaru-wrx/exterior/rear-lips-diffusers/subaru-rear-aero-splashguard-2015-wrx-2015-sti#.XuenGBySlGM JDM Splashguard: www.subispeed.com/2015-subaru-wrx/exterior/rear-lips-diffusers/subaru-jdm-aero-splash-guards-rear-2015-wrx-2015-sti#.XuenHRySlGM
@AoiKaze2000 4 жыл бұрын
@@akqjtn Yeah, it's why I went with them (still have a WRX CVT, currently stage 2 =). On a completely different note, did you do any sound deadening to your STI?
@rumbledotcom2261 4 жыл бұрын
Badass
@dilsonflores6974 3 жыл бұрын
What a great job. Can you do mine? 😃
@pukthewizz 3 жыл бұрын
ta heaps!
@sandeepnarayan5581 4 жыл бұрын
haha sorry I'm still looking for the link to buy them. Can anyone help
@sandeepnarayan5581 4 жыл бұрын
@@akqjtn yes man front and side
@jamzwayne 5 ай бұрын
Dooooope
Fabiosa Best Lifehacks
Рет қаралды 20 МЛН
Import Image Racing
Рет қаралды 2,5 М.