STI/WRX Side Skirt Installation (Side Under Spoiler)

Рет қаралды 35,590

4 жыл бұрын

See a detailed side under spoiler installation in a 2020 Subaru STI. I show you what you get in the box and how to install it easily in your own garage in minutes. This specific installation applies to 2015+ model years of the WRX and STI.
This is the lip installed (E2610VA000) →→ amzn.to/2CNSm91
Front lip install video → • Subaru OEM Front Lip S...
Tools you’ll need:
Cordless drill
Drill index (5/32, ¼, 3/8 OR 3mm, 6mm, 7mm, 9.5mm, and 10mm)
Punch tool
Phillips Screwdriver
Clip removal tool →→ amzn.to/3fmCVCK
Electrical Tape
Microfiber Towel
Painter’s Tape
Alcohol
____________________________________________________________________________
→→Check out my MERCH! →→ boostshutter.myspreadshop.com
→→ www.amazon.com/shop/boostshutter This is my personally curated list of fantastic car products. Many of these you can see in my KZfaq videos. Be sure to read the comments to see why they made the list!
____________________________________________________________________________
If the video was useful, give it a "thumbs up" and consider subscribing!
Subscribe to Boost & Shutter → / @akqjtn
Instagram → / boostandshutter
Facebook → / boostandshutter Twitter → / boostshutter
______________________________________________________________________________
Links above may be affiliate. As an Amazon Associate I earn from qualifying purchases. Using these links costs nothing more to you. I will always provide my honest opinion about the products I use and acknowledge any sponsor.
_____________________________________________________________________________
Thanks for Watching!
#STI #WRX #SUBARU

Пікірлер: 50

@xrateplaya 3 жыл бұрын

I really hope they pay u for these vids. U help me out so much with my installs..used to be so intimidated

@pogtuber5146 2 ай бұрын

Awesome tutorial. I don't have templates for my side skirts but I think I'm going to remove the rocker panels just so I'm not working on my back and have more control over placing the skirt and drilling in the screws. Great tip on using the electrical tape since it's not obvious that you can drill right through and up into the side of the panel. Only thing I would add which I saw in another video is that those rocker clips that go into the body have pieces of foam (to prevent rattling) and it's easy for them to fall off, check to make sure you have all of them on before installing the panel back onto the car. Also I see what you mean about strong horizontal lines but it looks great.

@paulmarsdensr1095 Жыл бұрын

The front lip, and side skirts make the STI look really good. 😊I have a world 🌎 Rally Blue Bluebaru STI. I got that name from Smeedia. 😊

@brianmiller5074 3 жыл бұрын

As with the other comments you do a great job in explaining the process. It is very intimidating to get a new car and start removing stuff and drilling holes into it. You show the steps in such a way it breeds confidence into the less confident. Well done keep up the great work.

@ezevas 4 жыл бұрын

Great video my man. I appreciate you taking the time to make these detailed install videos that save us time and help us avoid costly mistakes 🙏

@svleonard85 3 жыл бұрын

Love your content. Got my side skirts installed today. Your video helped tremendously. Thanks for making it.

@alberttovar 2 жыл бұрын

Installed my front lip and side skirts with the help of your video. Thanks bro. 2020 STI. ✌🏼

@ricerckt 2 жыл бұрын

Very nice video, man. I’ve been dreading taking off the side skirts of my STI. You’ve definitely put my hesitation to rest.

@brimley0724 3 жыл бұрын

Thanks for posting this tutorial! The side skirts look amazing!

@6ix418 3 жыл бұрын

Traded my 18 sti for a 21 sti. And I'm glad I found this. I'm buying the whole kit Tomorrow. Thanks for the videos you put up good job

@christos881 4 жыл бұрын

Looks good, matches and flows well with your front black lip spoiler...

@CompSciGuy2 3 жыл бұрын

Love the tutorial: very well laid out and great explanation.

@kristennizzaro7305 3 жыл бұрын

So helpful, doing mine tomorrow. Vehicle is tight, very slick looking

@danbel34 2 жыл бұрын

Very detailed and comprehensive, well done, thank you.

@zachburkhart9567 3 жыл бұрын

Great video! Only thing I did different was after install I noticed small pebbles getting trapped in the area where small push pin is located in rear wheel well. I grabbed some thin all-weather single sided foam tape and applied it to area where skirt rests to keep debri out and prevent paint damage (sti should have ran that thin rubber all the way around that corner imo). Actually referenced this video for install as the site for instructions wouldn't load so thank you for the help!

@TheJasbmx 4 жыл бұрын

Looks good it adds a clean look not to racer will be doing this to mine . Thanks for the video.

@andycheek766 2 жыл бұрын

Thank you for this video this is the next step in upgrading my car and I think using Subaru components wherever possible doesn't take away from the value of the vehicle

@chrislittle20 4 жыл бұрын

Wow awesome video, I have to check out the rest of them now.

@SGTKrash 4 жыл бұрын

Looks good with the side body moulding

@paulmarsdensr1095 Жыл бұрын

I'm going to get prices for these components today @Irvine Subaru today. A great video brother. Take care and I really wished Subaru made a VB STI.

@bad_puppy_6740 4 жыл бұрын

Very detailed install!

@F80Amar 2 жыл бұрын

Thank you so much for this video

@NiceGuyYoutube 4 жыл бұрын

Moldings are there to protect from those door dings. they saved my door once and i was glad it was there.

@fekawidjaja1235 2 жыл бұрын

Thank you for a good video

@MrBilly235 3 жыл бұрын

Your car looks great not too much anything, just right!

@MatthewSmith-vn1nf 3 жыл бұрын

Hey mate. Thanks for the great wrx videos. Wondering if you could do a video on replacing the standard older 2015 wrx cup holder with the newer 2018 premium cup holder with sliding closure. I think this adds a lot to car interior look but not many people have done it. I think it looks poor on the older and v1 models. Thanks!

@leowashington8991 2 жыл бұрын

Wish they have a Video like this for Lexus GSF

@Ryan-719 3 жыл бұрын

Ism crew lets goooo

@emilymorgan3364 2 ай бұрын

Hi! Your tutorials are so helpful!! Do you think these will apply/help me with modifying my 2023 Subaru Impreza? I can’t seem to find any on that car

@TheKRAZYboy123 4 жыл бұрын

Love your videos man! Question that you might be able to answer: For CVT WRX's ( I have a 2016 Premium) is getting the Boomba BPV worth it and in any way harmful for the car? Ive been seeing its a good mod and what are your thoughts?

@SC2Racer 3 жыл бұрын

Great video man, but is the removal of the side skirt needed ? Using some Ramps would make like a lot easier .

@texasitalian84 4 жыл бұрын

Hey bro love the content ! Where u from ? Based off the videos your in western NY ??

@dundeefus11 3 жыл бұрын

I came to this video to look at the install... I noticed the subtle flag overlay on your rear passenger window...where did you get it? Nice touch...I am now contemplating this as opposed to a small flag on the door

@xil3ntkha0s Жыл бұрын

Wish all oem pieces fit perfectly like this. Bought a new trunk but there’s a gap on one side and it drives me crazy.

@Simba-Ironside 4 жыл бұрын

Does oem skirt/front lip clear ground well enough for parking spots, bumps, etc?

@RS-jr1qd 2 жыл бұрын

Hey my 2021, I bought it new. Im trying to put these on and it seems like it’s made of a super soft plastic. I basically ended up almost string the screw. And the screw has turned into black resin almost. I could have totally messed this up. But I was using the proper tools. Idk what’s going on, any advice on removal?

@derrickleong8844 2 жыл бұрын

Where can I buy the template for the side skirt? Also, does the side panel have those little X's like the front bumper does for the front lip install?

@joev8275 4 жыл бұрын

Did you install the side moldings yourself?

@eliashrodriguez6651 3 жыл бұрын

Where can i purchase more of the 10mm seal clips?

@Steven-TV0229 2 жыл бұрын

Hello friend how can I find that same side skirt

@michaelgeorge5436 3 жыл бұрын

Would this install be possible without removing the side pieces and just jacking the car up instead?

@michaelgeorge5436 3 жыл бұрын

Great vid and good explanations. I always laugh at Americans and their use of imperial measurements though 🤣🤣🤣

@mauriciobravoderueda5253 2 жыл бұрын

Definitely remove the side moldings. I always felt they gave cars that old 99 Ford Explorer vibe

@__akuuma Жыл бұрын

where’d you get the hardware?

@ronfromportland 3 жыл бұрын

Do you think this is possible to install without the oem hardware? The reason I ask is because I purchased a used STi oem side skirt kit but it didn’t include the hardware. I was thinking of just using screws from a different kit

@ronfromportland 3 жыл бұрын

@@akqjtn thanks!