No video

Alfa Romeo 159 JTDM SWIRL FLAP GUIDE- swirl flap delete

  Рет қаралды 35,260

Full Boost J4

Full Boost J4

Күн бұрын

Here is a guide to understanding what swirl flaps are, how they work, what goes wrong and what the best solutions are to fix the problem.
It isn't an exhaustive guide and there are other options to get you by without having to replace or delete the flaps.
There are kits available and specialists that will carry out the delete including software.
This is a guide for the most ideal outcome.

Пікірлер: 49
@CulinarySpy
@CulinarySpy 2 жыл бұрын
Bloody heck! I just bought a 1.9JTDm that had 2 new valves fitted after a flap was ingested and bent 2 valves. Now I'm gonna have to check whether this thing has been de-flapped!
@josefkocag3135
@josefkocag3135 5 жыл бұрын
I like lexus and alfa
@baksoothedon588
@baksoothedon588 2 жыл бұрын
Bonjour j'aimerais savoir avec quel outils avez vous supprimer les swirl ?
@the_steko
@the_steko 4 ай бұрын
I just want to know, how much diffrence there is if i delete them or buy a new manifest, with new flaps, because its around 250€ cheaper to just buy delete kit
@the_steko
@the_steko 4 ай бұрын
like is this realy important or should i jsut delete it and have peace
@FullBoostJ4
@FullBoostJ4 4 ай бұрын
You could get a new one and it could be fine for another 8 to 10 years. With a delete kit, you have peace of mind that the flaps will never be able to damage the engine, and you'll never have boost leaks. I don't suppose they stay air tight for very long anyway.
@the_steko
@the_steko 4 ай бұрын
@@FullBoostJ4 the car is from 2005, its my first car i suppost i wont have it for 8-10 years, maybe 4-6years.....and what performance do i get with a new manifest or delete kit, how much better is it with the flaps
@FullBoostJ4
@FullBoostJ4 4 ай бұрын
I think you'd barely notice any difference
@the_steko
@the_steko 4 ай бұрын
@@FullBoostJ4 so your sugestion is 40€ on delete kit and i am free of that shit, because also want to chip it alittle :)) to like 180hp from 150 and i dont know if the flaps play a major role in performance
@useruala2
@useruala2 5 жыл бұрын
Great video! Keep them coming!!!
@FullBoostJ4
@FullBoostJ4 5 жыл бұрын
Thanks Dan, more coming this week👍
@stevenjr6582
@stevenjr6582 4 жыл бұрын
@@FullBoostJ4 in labour how many hours does take this?
@FullBoostJ4
@FullBoostJ4 4 жыл бұрын
@@stevenjr6582with this job the cambelt needs to come off and most people who get this done get the belt and water pump changed at the same time. I think I've got a receipt for the job done on the 159 I bought, I'm sure it was about 4 or 5 hours with a specialist.
@Runeakb
@Runeakb 2 жыл бұрын
Hi! Thank for the guide! I am going to delete the flaps on mine this weekend. There is excessive play in the shafts of the flaps rendering the manifold leaking. I Wonder if that is the reason to a hissing sound under hard acceleration. Initially I thought it was the charge air piping and hoses that had holes in them, but there are no holes.
@FullBoostJ4
@FullBoostJ4 2 жыл бұрын
Thanks for watching 👍 yes I had a similar issue. With some spray on the spindles I could see lots of bubbling and more so when revving the engine so under high boost I imagine it was quite a leak. It also reduced black smoke too 👍
@Runeakb
@Runeakb 2 жыл бұрын
@@FullBoostJ4 fantastic. Have a good day. Cheers
@Runeakb
@Runeakb 2 жыл бұрын
@@FullBoostJ4 after several hours of work with deleting the swirl flaps and cleaning out the manifold I must say the car is reborn! No smoke and plenty of torque! Fantastic!
@FullBoostJ4
@FullBoostJ4 2 жыл бұрын
@@Runeakb That's great news!! Well worth all the effort 👍
@ouchacho
@ouchacho 4 жыл бұрын
very good mate
@FullBoostJ4
@FullBoostJ4 4 жыл бұрын
Thanks Greg👍
@marioQ4
@marioQ4 4 жыл бұрын
After how many miles can i expect something like this?
@FullBoostJ4
@FullBoostJ4 4 жыл бұрын
The shafts take a while to wear but mine had covered 90k miles, expect to see problems arising from 40k miles
@Lambig56
@Lambig56 2 жыл бұрын
Nice video! I bought a new manifold, was wondering if you use any kind of sealant when you mount it back on? The new one came with no joint of any sort. Thanks :)
@FullBoostJ4
@FullBoostJ4 2 жыл бұрын
You'll need to use a new steel gasket, readily available from Alfa or other Alfa specialists, I'm surprised the manifold didn't come with a new one.
@Lambig56
@Lambig56 2 жыл бұрын
@@FullBoostJ4 I ordered one. I am also a bit surprised, so annoying!
@samelliott9665
@samelliott9665 2 жыл бұрын
Would a terra clean not solve the problem?
@FullBoostJ4
@FullBoostJ4 2 жыл бұрын
Might help clean it up but if you've got play in the spindles of the swirl flaps it still needs sorting. Also water meth kits are great for keeping intakes clean.
@samelliott9665
@samelliott9665 2 жыл бұрын
@@FullBoostJ4 ok thanks for the reply, I need my timing belt and water pump doing, and as I understand it’s a good time to do the flaps as well, but it’s £1000 all in as appose to £400 for belt and pump change, my car pulls well (bit Smokey) starts fine, so should I get it done? Thanks
@FullBoostJ4
@FullBoostJ4 2 жыл бұрын
New inlet manifolds are available but the best thing you could do would be to delete them. But don't discount fitting a new manifold if you want to keep things standard and not require a remap etc.
@samelliott9665
@samelliott9665 2 жыл бұрын
@@FullBoostJ4 appreciate the advice, thanks 🙏 👍🏻
@blairarcher8952
@blairarcher8952 Жыл бұрын
You don't have to have a remap after deleting.Just remove the plastic arm off the actuator and the ECU still thinks it's connected and moving flaps .
@vitornody
@vitornody 5 жыл бұрын
nice have to do the same thing to my alfa 2.4
@marianmarian1821
@marianmarian1821 3 жыл бұрын
Greetings! Are these engines reliable? What are the most expensive problems with this engine?
@FullBoostJ4
@FullBoostJ4 3 жыл бұрын
They are generally very reliable, the biggest issues people have are the swirl flaps causing problems. Next are EGR problems with coking up (but that's also most diesel engines) The exhaust manifold studs have a habit of breaking on number one and five cylinders. This will exhibit itself from via a ticking or tapping sound. They're a great engine with plenty of torque and power and being five cylinder they sound fantastic 😃
@marianmarian1821
@marianmarian1821 3 жыл бұрын
@@FullBoostJ4 thank you very much!
@Slothdeman
@Slothdeman Жыл бұрын
Hey mate! Where are you located? I would like to get this done
@FullBoostJ4
@FullBoostJ4 Жыл бұрын
I'm in the North East, any local engineers will be able to carry out the work on the inlet for you👍
@fredibajrami2447
@fredibajrami2447 4 жыл бұрын
I have a question,what about of the consumption after delete swirl flaps...it's more than before?
@FullBoostJ4
@FullBoostJ4 4 жыл бұрын
Most people don't notice any difference in consumption, also people that delete the Egr at the same time notice better consumption🙂
@fredibajrami2447
@fredibajrami2447 4 жыл бұрын
thanks...how can I delete the EGR,is more fast after delete?
@FullBoostJ4
@FullBoostJ4 4 жыл бұрын
@@fredibajrami2447 there are kits you can buy easily and cheaply online for basic deletes. While the software side of the EGR can be deleted by reputable garages who specialise in mapping etc. People report an improvement in performance, much cleaner engine and improved fuel economy 🙂
@fredibajrami2447
@fredibajrami2447 4 жыл бұрын
@@FullBoostJ4 thanks bro,I would more with u about the cars,do you have any adress instagram or FB?
@FullBoostJ4
@FullBoostJ4 4 жыл бұрын
@@fredibajrami2447 facebook is facebook.com/fullboostmedia/
Alfa 159 Saab Vauxhall plastic manifold swirl flap delete guide
10:19
2.4 jtd swirl flaps delete guide Alfa Romeo
8:45
Algis Andrulis
Рет қаралды 9 М.
ПОМОГЛА НАЗЫВАЕТСЯ😂
00:20
Chapitosiki
Рет қаралды 28 МЛН
How I Did The SELF BENDING Spoon 😱🥄 #shorts
00:19
Wian
Рет қаралды 36 МЛН
My Cheetos🍕PIZZA #cooking #shorts
00:43
BANKII
Рет қаралды 27 МЛН
OMG what happened??😳 filaretiki family✨ #social
01:00
Filaretiki
Рет қаралды 12 МЛН
Blocked and worn out Swirl flaps
6:47
Italia Autos
Рет қаралды 127 М.
Various solutions for EGR Mjet and JTD systems. Alfa Romeo 159
11:28
Alfa Romeo? No Problem!
Рет қаралды 6 М.
Uradi sam skidanje klapni na 2.4 motoru
23:30
Alfa Doktor
Рет қаралды 46 М.
Alfa Romeo 159 Brera 2.4 Swirl Flap Manifold Removal
9:55
Italia Autos
Рет қаралды 36 М.
Alfa Romeo 159 INTERIOR REPAIR
25:44
939 Driver
Рет қаралды 67 М.
Vauxhall Opel 1.9 CDTI Swirl Flap Removal and Blanking Inlet Manifold 150HP
24:40
МЕ FIXING EVERYTHING
Рет қаралды 4,6 М.
ПОМОГЛА НАЗЫВАЕТСЯ😂
00:20
Chapitosiki
Рет қаралды 28 МЛН