All Good Things Must Come To An End..........

Рет қаралды 420,806

14 күн бұрын

Go to getsunday.com/fabrats and use promo code FABRATS30 to get 30% off your custom lawn care plan! #sundaypartner #sunday #lawncare
We've been working the Rat Rod Wrecker and it's starting to show. While the extra ponies it now has from the super charger are awesome, it has created a bit of a problem in other areas. Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More videos you'll love:
The Ratback Bed Is Finally Coming Together
• The Ratback Bed Is Fin...
The Free Truck Left Us STRANDED In The Snow!
• The Free Truck Left Us...
Here's The Reason We're Collecting All These Buggies!
• Here's The Reason We'r...
Will an ABANDONED old Jeepster RUN AND DRIVE after 20 years?
• Will an ABANDONED old ...
Will Vice Grip Garage’s 1952 Packard RUN AND DRIVE 2,000 miles back home?
• Will Vice Grip Garage’...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

Пікірлер: 1 100

@rrphelps 12 күн бұрын

Shawn is awesome. I hope he will be with the show for a LONG time! Smart, easy going, a 'doer' and just the calm cool addition the place needs.

@magicyeti5630 12 күн бұрын

Needs a BEARD again. 🥸

@bradleymadosh911 12 күн бұрын

Also I hope Shawn and Hunter never leave. If I was Paul I would pay them good to stay

@stevenmelzer6670 12 күн бұрын

I’m sure he pays them really good. You never know when or if they will get a better offer. I bet they are not making “retirement” money tho… I’m just glad they put out good content and that they are local and welcome fans. Good work!

@glennmuir5617 11 күн бұрын

@@magicyeti5630 Just gaze at your boyfriend when you want to see a beard.

@magicyeti5630 11 күн бұрын

@@glennmuir5617 why I got pictures of You now… 💋

@joshleners2049 12 күн бұрын

It’s the intermediate shaft in the 205. That has tapered roller bearings that need to be preloaded. There are shimmed. That that shaft is sliding back and forth.

@bradleymadosh911 12 күн бұрын

I hope Paul reads this. I figured he didn't put something back together right. It didn't jump out of high range before so it was something he didn't do right 👍🏽

@boostin100 12 күн бұрын

Was gonna say it's a gear or shaft being forced into the case on decel

@JimZabad 11 күн бұрын

I did the same thing on my 205 in my 72 Jimmy many years ago. After pulling the T-case out and torn apart, an old timer showed me what I did incorrectly. After setting it up correctly it ran about as quiet as a gear driven case could run. Wish I would have had a lift like I do now. 💪🏼 Remember to breath through your nose Paul! 👍🏼

@haroldphipps3457 11 күн бұрын

@@JimZabaddo you remember when GM changed from the Rockwell to the New Process transfer case?

@Burnside1905 11 күн бұрын

@@haroldphipps3457I believe it was part way through 1969. Early ones from '69 have the Rockwell, and later ones could have the NP205 or a Dana 20

@imafarmboy2 12 күн бұрын

One thing about those kind of noises...the longer you wait, the easier they are to find.

@Deadly_DoRight 11 күн бұрын

the flip side to that is the more likely it is for the problem to spread and get more expensive

@danialbargas2203 10 күн бұрын

Best comment ever

@White-Head 10 күн бұрын

Drive it like you stole it ....problem will show it self lol😅

@helloneighbor11 8 күн бұрын

@@Deadly_DoRightyes, but that makes for better content

@allfour.property.services 12 күн бұрын

Best way to find exhaust leaks is with a shop vac set up to blow stuck in the tailpipe, no rumble from the engine and the exhaust stays cool 👌🏼

@lethargicmotorsport2025 11 күн бұрын

Dang , that’s a good idea.

@servicedogojokeguys2967 10 күн бұрын

Nice 👍🏻. Didn’t know that

@moparman1962 11 күн бұрын

Paul is a good boss and supervisor, Shawn is a great addition to the Fab Rats channel and Family, and Hunter is a great cameraman, helper as needed and doer when stuff needs doing.

@MC-re2ry 12 күн бұрын

I'm growing long in the tooth. Shop time was always my favorite time in my younger days. Our iron was a different breed - mainly what we needed to raise corn and beans in Iowa. None-the-less, there were three of us who spent many hours cussin', discussin' and doing what we had to do to keep putting power down where needed. Watching the Fab Rat crew takes me back there. Thank you for the good times.

@davehollingsworth3007 12 күн бұрын

My Neighbor Roger Rupe is probably the best mechanic I've ever known and his answer to noises is " Your Listening Too Hard"! LOL!

@teamidris 12 күн бұрын

Yep, I own a 1958 landrover and ear defenders are the way to a happy journey. Also carry plenty of spare parts so you can make it home :D

@garypacholek8070 11 күн бұрын

It's been 40+ years since I've done one of those transfercases but I do remember stacking the bearings, fun stuff. A solution for switching over your doors could be replace the hinge pins with bolts of the same diameter. Time to switch doors, pull the bolts the hinge splits in two, the outer stays on the door and the inner stays on the cab. All you need is another set of outer hinge sections and I'm sure that you have access to those.

@TyphoidSnaily 11 күн бұрын

My Father used to tell me about the same. His attitude was always "Drive it until the problem becomes more obvious..." Lol

@gregorygene9003 11 күн бұрын

I just raise the volume of my radio.

@john0270 11 күн бұрын

Nah something ain't right, that's irresponsible to just dismiss it.... popping out of gear ect and just trashing it further on camera? That's low grade workmanship all around.

@lonniebicknell6847 12 күн бұрын

All the fancy things built in that garage the Old Wood Truck just sits outside waiting for the call

@peeweegnome8977 12 күн бұрын

What's really cool is Hunter has been accepted as one of the crew of FabRats. You guys make working an wrenchin funny an entertaining. Roll on guys

@jameschoreboy2540 12 күн бұрын

We ain't missing anything w him

@RedSix-Tactical 12 күн бұрын

I thought he already was.

@samtrosper7224 12 күн бұрын

He is part of the FAMILY not just crew.

@michaeldilbeck7012 12 күн бұрын

For The Longest Time I Always Thought Paul Was Hunters Dad!

@COM70 12 күн бұрын

Well said 👍

@terrya6486 12 күн бұрын

If you delete the open needle bearings and bore out that bearing surface And put a caged needle bearing in there.All your problems will go away.Something I used to do when I built 205 years ago.

@richardwright345 12 күн бұрын

Accidents dont count unless you have to go to the doctor. lol

@haroldphipps3457 11 күн бұрын

Last place I worked, it only counted if there was time lost. Bonuses counted on less injuries, so some really stupid people came to work hurt.

@glenncapone 12 күн бұрын

I love the attitude "we'll use it until she's broken, and then we'll fix it." When you have the confidence you have, it's a solid plan.

@calholli 12 күн бұрын

Well it's already broken.. so what is there to lose

@TheSprayer41 12 күн бұрын

its junk

@HOTRODMONZA 12 күн бұрын

Ya cant just JUNK IT

@tmdwu3110 12 күн бұрын

Preventative maintenance is the better route. "Run to failure " is what they do at my job and those failures can lead to a lot bigger problems.

@agentcrm 12 күн бұрын

It's great for content, It's bad for anything you're relying on. Because when things break, the down time is longer and you don't know the collateral that can happen.

@UncleManuel 12 күн бұрын

Derek would say "Let's pretend we didn't hear that." and would drive on until it explodes... 😁🤟

@waynehollars5048 12 күн бұрын

Good ol vice grip wisdom

@pcspecialistpdx 12 күн бұрын

That wisdom works fine for Derek, but, this is a tow truck that is doing rescues, not a vehicle being rescued.

@davidleavitt3804 11 күн бұрын

Yeah just turn the radio volume up higher.If no radio install one and then do the previous.

@Keinandrew3 11 күн бұрын

That ole wood truck sounded great going up that hill it deserves some love

@user-bg8ds5bn6k 12 күн бұрын

Nothing like a supercharged, 4 wheel drive, rock crawling tow truck . Makes me smile !

@chriswatson8251 12 күн бұрын

I just have to say, I love that you kept the silver/blue doors as the full doors. Makes me think of grandpa Sherm every time I see it with them on.

@jbhunsaker 11 күн бұрын

The zip tie on the wood truck's windshield wiper is classic Fab Rats!

@marklindenmayer2511 12 күн бұрын

Paul is definitely a supervisor material. He knows exactly who to blame.

@Cantsaydog 12 күн бұрын

When you play hard shit happens🤣 When you solve the problems that’s when you learn Getting there is half the fun🤣 God bless you Paul crew and Family I always looking forward to the next episode of FABRATS 💯✊🇺🇸😝

@ricearonicornish 12 күн бұрын

Thank you for showing your "fails" as much as your success's. It is nice to see that even the folks that know what they are doing, don't always figure it out the first time. Keep up the good work.

@donwilliams3626 12 күн бұрын

Paul, as often as you have to visit the bone yard you must keep a standing order at the salvage yard to restock your inventory!

@charleswilliams3982 12 күн бұрын

I never really comment on anything. But I think you're a good dad man

@moody2924 12 күн бұрын

Iam not sure who is in charge of language censorship, but from all of us, give that person a raise…. My video would have sounded way different than Paul’s…

@andybee4236 12 күн бұрын

Even though you can buy a bearing kit these days, I love that the boneyard is still the first option for parts. Ratting parts is a great skill. You are teaching a new generation how to just make it work. Also, the extra ponies making new problems is a huge lesson. I love watching, learning, and laughing with you guys. Comments are primarily for the algorithm but heartfelt. ❤❤❤ I'm glad you all see it as "stuff" others see it as fecies, they are wrong.

@steveclark4291 12 күн бұрын

I would love to go out to his bone yard and see what I could pull out ! An build just for fun and see if it would run ! I wonder what he's going to do with the frame from his '59 Willys as I have a '57 !

@patarmstrong3582 12 күн бұрын

Feces?

@wynottgivemore9274 12 күн бұрын

@@patarmstrong3582 crap...😊

@haroldphipps3457 11 күн бұрын

@@patarmstrong3582shit. Poop. Excrement. Doo doo.

@tyendor503 12 күн бұрын

"if you go down just hang on to it, I'll just pull you back up" LOL

@6226superhurricane 12 күн бұрын

i watch these videos and it reminds me why it's worth spending the extra time to do things properly.

@tdc9136 11 күн бұрын

ditto, or take it to a competent mechanic

@bfgivmfith 12 күн бұрын

That sucks! You have a better attitude than me. After all that work I would be cursing and throwing things! LOL!

@trail-wolf4x4 12 күн бұрын

I still love that old wood truck i hope you guys never get rid of her!

@robc.2257 12 күн бұрын

This was the product of the Fuel Tanker. Love the content!

@davebenson1504 12 күн бұрын

I was thinking the very same thing!

@Timo_tambien 12 күн бұрын

Me too. Was expecting some spliced footage of the truck jumping while hooked to it

@jablonski29 12 күн бұрын

Thought the truck had summer doors on it already for the fuel tanker recovery?

@chrisantoniscountryman-pur9954 12 күн бұрын

Nope. Went back and watched. Winter doors were on for the tanker pull.

@calholli 12 күн бұрын

It's the results of having high horsepower on a doubler... They weren't really designed for that. A doubler is for like a Toyota Tacoma with a smaller engine.. and it gives you a lower gear reduction to make it easier for the smaller HP engine to work. But when you put high HP on one end.. it multiplies the torque by too much, and things will often break

@ryanluzier7570 12 күн бұрын

That old wood truck is one Of a kind. That old truck needs some love it has saved you on more than one occasion. It deserves it God bless.keep the good videos coming

@HollyPribyl-sl6ug 11 күн бұрын

What ever you do,do not work on the wood truck.

@Donwrongway 12 күн бұрын

Who needs the tow truck when the wood truck is a beast too

@dougalexander7204 12 күн бұрын

Woodrow in the trailer next door comes over and watches KZfaq on my plasma. FabRats is our favorite.

@89G 12 күн бұрын

Nice to see the old wood truck pulls through again.

@doggonedk 12 күн бұрын

Finally a Commander I have a completely stock Commander and I love it. Sean and Hunter are absolute naturals in front of the camera. Great video as usual.

@brockduckworth2029 12 күн бұрын

Wood truck to the rescue.Gotta love it

@doyleswearingen6262 10 күн бұрын

Single cab and a gun rack in the back window, 😆 YEAH!!

@PaulBarwick 12 күн бұрын

Great channel. The only change that I would suggest is that you give windshield cleaning a higher priority. You are in a really beautiful part of the country and it would be nice to have a clearer look at it.

@lgun1 12 күн бұрын

Bearing only two layers deep is easy compared to a Muncie 4 speed. They are smaller and stack 4 layers deep around the main shaft. It will cause you to learn to cuss.

@sarahstephens5966 12 күн бұрын

On the other hand, the Munchies are badly geared, no overdrive, and the musclecar versions only had an inadequate 27 spline output shaft, so better to swap to something else

@tomcleghorn4005 5 күн бұрын

Shawn’s so PHAT!!!! Awesome work guys. Even if it made it worse. We learned things. Pick up and carry on

@charlesthistlethwaite 12 күн бұрын

It was game over for that transfer case as soon as you painted it! 😅

@elmerwilliamson1970 12 күн бұрын

As long as you’ve got your green hammer handy, I’ve got 100% confidence in you Paul!

@rhllnm 12 күн бұрын

I like that hammer way more than a claw hammer.

@bryanhersman4037 12 күн бұрын

I learned early on if your truck is making a strange sound just reach over and turn up the stereo louder. When the noise gets so loud you can still hear it over the stereo then it's time to finally get a new stereo.

@larryjohns8823 9 күн бұрын

Bigger speakers should come first...😅

@canecorso7924 10 күн бұрын

Those antennas that run up the glass bring back so many memories!

@yztankless 11 күн бұрын

Paul has got a great attitude, just rolls with it and keeps calm

@mypronouniswtf5559 10 күн бұрын

Yes on camera,you should see him off of camera,I bet he had a few choice words and threw a few things....

@yztankless 10 күн бұрын

@@mypronouniswtf5559 well now I feel better about myself. I do that too LOL

@michaeldilbeck7012 12 күн бұрын

Man Its Always A blessed Day When I Start My Morning Off With Watching A Fab Rats Vidja! Love The Content Paul Keep It Up Man💪.

@AdventuringwiththeS.G.O.C.C 12 күн бұрын

The Wood truck for the win !

@Goose_Farquit 12 күн бұрын

Wood truck for the win!

@justinfisher36 12 күн бұрын

Drill out your hinge pins and turn down shoulder bolts and youll be able to swap out the doors like a jeep

@rickharper1497 12 күн бұрын

Doesn't matter what kind of wheeling you do, stuff breaks.

@artyseibert 11 күн бұрын

😂😂 “How do we get this apart?” - “Hammer!” 🤣🤣

@RIPGLIDE 11 күн бұрын

Love the wood truck. It's the real deal

@user-yj2wu5hf6i 12 күн бұрын

Great diagnosis Boss Rat. I suppose it get a heck of a lot of punishment with the shock it must receive when snatching things like the loaded tanker. I agree the oil would have caused the faults you have but with no oil and the shock as well it would have gone sooner or later. You’re doing the right thing by looking at a strong box but just be careful about what is the next weakest part.

@zenmaster1761 12 күн бұрын

I really like the zip tie on the windshield wiper there that's a fine top-notch fix it. You should not have painted it that's where you screwed up, and you forgot a zip tie at least you weren't throwing things or screaming up a storm at least not on camera

@rayray5932 12 күн бұрын

The zip tie on the wiper is epic...lol

@TrulyUnfortunate 10 күн бұрын

Love those Mickey Thompsons!!! Best tire I've ever had on my 4x4's bar none!!!

@Kevin-ti3rz 12 күн бұрын

That 203 been hanging out with the kids at the craft store and came home with glitter all over, Busted !

@ndafarachaitezvi1139 12 күн бұрын

Awesome and outstanding as always.Thanks for sharing and taking us along

@BakeShake 11 күн бұрын

I can relate to the defeated feeling of working all day, waiting on parts, working all day again... and the problem isn't fixed. Just part of it.

@primrosereceptionist611 12 күн бұрын

Paul, you're like me. I always say "If there's a sharp edge on something I'll find it."

@456fredva 12 күн бұрын

Yip I know what is wrong,...... it's the paint, you had yourself a premonition at 32:22😂😂

@andrewfinnegan9991 12 күн бұрын

I wonder if it has anything to do with bouncing odd that yankem rope pulling that tanker truck out lol

@Ryan-ho9tz 12 күн бұрын

Nothing better than old Square bodies workin in their natural environment.

@GeneralEOD 9 күн бұрын

I want to see the Wood Truck fitted with a dual T-case setup. That should give the truck approximately 175:1 ratio to crawl with a heavy load.

@rodmeisterful 12 күн бұрын

What a great crew!

@HowtoRestoreHeadlights 4 күн бұрын

That mater clip was hilarious!

@gregcullen248 12 күн бұрын

I love the half doors. Hot Wheels should make your tow truck. The Japanese station wagon looks lonely.

@Bradzuzu 12 күн бұрын

That sounds like ring and pinion sound is traveling up the driveline , ask me how I know LOL

@Mark_Bridges 12 күн бұрын

Could be it. If they find nothing wrong in the transfer case then possibilities like that are worth checking.

@calholli 12 күн бұрын

@@Mark_Bridges It's still falling out of gear though.. so it still needs to be pulled apart again.

@robertheinkel6225 12 күн бұрын

That was my first thought

@Mark_Bridges 12 күн бұрын

@@calholli Yeah. No easy solutions.

@calholli 12 күн бұрын

@@Mark_Bridges The little ring that the forks slide back and forth... only works correctly in one direction.. But it's very similar and can go on both ways.. So it's an easy thing to get turned around. You have to be very particular and detailed when working inside these gear boxes.

@user-nu3hm3ik2e 12 күн бұрын

I wish that the adaptor plate for the dubbler wasn't so fricking expensive. My tow truck the TRAIL SIDE HOOKER needs it so bad.

@sarahstephens5966 12 күн бұрын

If you can borrow one to use as a template, you can build a copy for much less

@FrederickHopkins-xb6me 11 күн бұрын

Sounds like a bearing for sure. It's a start again scenario. Put together, take it apart, put together, take it apart, put together, take it apart. Ad infinitum.

@TACTICALGRASSHOPPER 12 күн бұрын

Note to editors: Respectfully please stop putting music over the sweet sounds of exhaust from a small block Chevy on a rip climbing sand hills haha

@aaronmcconnell7358 12 күн бұрын

You need a shirt that says "when all else fails ,take the wood truck." It's always ready and just gets the job done.

@thomasjarosz7406 12 күн бұрын

Paul, I neet trick for finding Bering Noise is to hold a broomstick against a part of your problem ,then put the other end against your outside of your ear. you will find it quick. the grinding sound of bering transfers through pole in form of vibrations and your ear interrupts the vibrations. Be Safe. God Bless

@kennethbrown8723 12 күн бұрын

It’s tough to do that while cruising down the highway!😂

@BillEffinMurray 12 күн бұрын

@@kennethbrown8723right if only they had a car lift

@bushratbeachbum 12 күн бұрын

I use a screwdriver on bike engines and have a stethoscope with a probe instead of a chest listening attachment on it. Works great!!!

@kentmackey2717 12 күн бұрын

@@BillEffinMurray Of course it only makes the noise under load on decel...so...

@BenderOMetal 12 күн бұрын

Had an 70' Chevy Blazer with the 465 4 speed and the 205 transferase, always popped out of low range at the worst times. Bolted a short piece of chain to the floor with a hook on the end for the shifter and never had another problem with it. Man I loved that truck.

@michaeltablet8577 12 күн бұрын

If it didn't fall off the truck it's not broken. Thank you for keeping it real!

@JimWooddell 12 күн бұрын

I change out those magnets with rare earth magnets. They catch metal way more goodder! 😊

@hillwilliam 12 күн бұрын

😂

@steveash9831 12 күн бұрын

WOW! Did you guys know this? I googled Glendale Utah, and the words Fab Rats shows up on the map!

@nerbs101 12 күн бұрын

Well yeah, its a legit business?

@stevencatone 12 күн бұрын

Who cares

@Rusted_Link 12 күн бұрын

What about the bordello?

@UnholiestJedi 12 күн бұрын

I'd bet Fab Rats put it there

@agentcrm 12 күн бұрын

Fab Rats has listed themselves as a business. They have added the location there, Google don't add them automatically.

@jkidd2007 12 күн бұрын

I really like the cable tie on the windshield wiper.

@garychaiken808 10 күн бұрын

Great job guys. Thank you 😊

@bryancondrey6457 12 күн бұрын

Agree with you on the gear noise. Sounds like a worn out GM 10 bolt when the backlash is way out of specs.

@timdillard3665 12 күн бұрын

Why did y'all spend all that time and money building the tow truck when you already had the awesome wood truck? Yall are awesome! However, we need more Name That Part with Michelle (hope i spelled that right). Im a Tennessee transplant from Mississippi. I was a diesel mechanic and parts manager. I call many parts the same as Michelle. Meeting you guys is #1 on my bucket list. Yall need to take a vacation to the Gatlinburg, TN area so i can buy you lunch (or you can buy me lunch - im easy). Because of seeing you on KZfaq every week, i feel like you are family. Love you guys.

@LTD347 11 күн бұрын

Should make a trolley to hold the doors in place when you swap them over. We’ve got one at work with a Jack at the bottom and a platform to hold the door upright in the right position. Makes changing doors a simple process. The Jack is to raise or lower the door exactly in position

@dcraig4 10 күн бұрын

You could pretty easily make some quick release hinges. Just remove the pin, grind off the ears, weld in tube at the top and bottom of one side and a piece in the middle of the other. Then make a new pin with a hole for a cotter pin at the bottom. As long as you maintain the center point of the pin, and don't make the tube too big, the hinges should work just like stock.

@bigblue1287 12 күн бұрын

Hence this is the reason I don't want to ever constantly have to be fixing my vehicles. It's a very cool concept but I don't know how you have the patience to constantly fix everything you already fixed. Love the cox's❤

@kawasaki5461 12 күн бұрын

That is why it's rewarding to fix your own vehicles. Teaches you the patience that you believe you're lacking.

@sarahstephens5966 12 күн бұрын

There's no escaping it. The new vehicles are manure and the good vehicles are worn out.

@HollyPribyl-sl6ug 11 күн бұрын

When the noise varies on and off load,that’s the pinion bearing going out in the differential.your hearing the gear lash changing.

@poppie1414 12 күн бұрын

I think Paul's heavy foot making the noise

@garypacholek8070 11 күн бұрын

The solution to changing your doors around could be by just replacing the hinge pins with the same size bolts and just pull the bolt out and swap the doors, kinda like a jeep door. The only thing that you would need is another set of hinges to use the outer half of, and I'm sure you probably already have a few in your parts pile.

@Crewsy 11 күн бұрын

Easy solution for most people when you hear funny noises is to turn up the radio. That’s a little hard for a KZfaqr though with all the copyright rules. I know the louder my radio is the better my singing gets. 😉

@PellegrinoC 12 күн бұрын

Use the stick method to listen for hidden noises like that. A wooden stick or metal rod will conduct the noise to your ear.

@JT_70 12 күн бұрын

A piece of vacuum hose also works well. Or, buy aa mechanics stethoscope from HF.

@manuelve1998 12 күн бұрын

Use a long screwdriver with a hard handle.

@Clara_linking 12 күн бұрын

WHY DONT YOU DO ANYTHING WITH MATTS OFFROAD RECOVERY ANYMORE.

@chubbrock659 12 күн бұрын

It’s probably the tool kits

@-Scotty 11 күн бұрын

Matt isn't a little btch who slags people off for doing their job like Paul did to that Ranger.

@stargazer7644 9 күн бұрын

Why do you have multiple accounts?

@dan31472 8 сағат бұрын

You need a chassis ear One of my favorite tools worth the money on the first job you use it for.

@DC-rl4rp 12 күн бұрын

Half doors are a sure sign of summer…even though summer seems months away still for us in Alaska😂👊👍

@mickydclement 12 күн бұрын

Are you guys going to do anything with Matt's Offroad soon?

@mattmcgraw8975 12 күн бұрын

Sean, you’re not fat you’re round and rounded as shape

@jaredsimcox2248 11 күн бұрын

We took the same trail to peekaboo canyon a couple months ago and got stuck in that exact spot in my sisters Durango luckily we were able push it out

@joelrossmeisl2867 11 күн бұрын

Always enjoy watching the Fab Rats! Cool family, cool projects!

@OnzaRob 10 күн бұрын

The joys of motoring, somedays just don't play nice! Great Channel, love the honest work!

@user-sz5nu4mw2q 11 күн бұрын

i like how clean your truck right now underneath

@seangerrity9217 12 күн бұрын

I have spent a few days in my mechanics shop getting some customization done on my pickup. I think yesterday I mentioned that all the youtube guys make it look so easy. I'm guessing it takes y'all several days of working to get enough material to make a video and then however long to edit and whatever other production stuff gets done. Lotta work to put out 3 videos a week!