Allen Bradley Controllogix Compactlogix Ethernet Connection Studio 5000

Рет қаралды 57,285

Күн бұрын

How to configure both RsLinx's Ethernet/IP driver and Ethernet devices driver to connect to an Allen Bradley Controllogix or Compactlogix PLC to Studio 5000 or RsLogix 5000. Controllogix Ethernet connection and the Compactlogix ethernet connection is easy once you have your PC's IP address set to match your PLC's IP configuration.
View our entire Studio 5000 Programming Lessons at twcontrols.com/controllogix-c...
Items used in this video:
All the rest of our Automation Supplies twcontrols.com/products
The above links make these videos possible. Please use them!
Support these videos while you advance your skills courses.twcontrols.com/

Пікірлер: 66

@mussali_a Жыл бұрын

Hi, Tim. Thank you very much. I am new to PLC, and really struggled to find my device in Studio 5000 "Who Active". Didn't know about RSlinx before. You saved me a lot of time and effort

@TimWilborne Жыл бұрын

Yes it can trip you up. Glad I could help out.

@jackpast 4 жыл бұрын

Hey Tim, nice video. I worked in manufacturing as an E&I tech for decades at one place. Our engineers must have done all the legwork to get the entire plants PLCs separated by department and machine. As a troubleshooter/programmer all I had to do was navigate to the correct icon on our shared drive and double click. RSLogix would open and as long as the running PLC program matched the file on the share drive, I could just click ‘go online’ and voila I was online and able to do on-the-run program changes/troubleshooting. And all of this was wireless also! Now I have been to other smaller facilities where IP addresses, Boot P, network adapter settings and everything you are going over is my new reality. Learning a lot in the last several years and keep these great videos coming! Thanks!

@TimWilborne 4 жыл бұрын

Yes you had the dream setup. I work with a few plants like that. They can spoil you. Unfortunately it is no the norm.

@bartnelissen3871 3 жыл бұрын

Tim... thanks for this video. This is coming from a guy who has dabbled with PLC5's and SLC's... then quite a few years of no PLC action... and I now find myself getting into dabbling with CompactLogix PLCs for some troubleshooting. Still early in the day here, but this was probably the best 10 minutes I'll spend today :)

@TimWilborne 3 жыл бұрын

Glad to hear it Bart!

@usoroekwereessiet4397 3 жыл бұрын

You are doing quite a great job Tim. Well-done!

@TimWilborne 3 жыл бұрын

Many thanks!

@augustograton8958 4 жыл бұрын

Thanks from Brazil Tim !!!

@TimWilborne 4 жыл бұрын

You are welcome Augusto. Thanks for watching!

@Nayshjin 2 жыл бұрын

I love the way u say, 'hi this is tim'

@TimWilborne 2 жыл бұрын

Maybe one day I'll come up with a catchy intro :)

@sudhandiramanisundaram4909 3 жыл бұрын

Awesome! Thanks for Sharing !

@TimWilborne 3 жыл бұрын

You are welcome!

@robertgoldie6409 Жыл бұрын

Thank you very much, worked like a charm.

@TimWilborne Жыл бұрын

That is great to hear!

@JJRD222 3 жыл бұрын

Effing awesome! Thanks!

@TimWilborne 3 жыл бұрын

You are welcome!

@jesusmartell6967 Жыл бұрын

Great video!

@TimWilborne Жыл бұрын

Glad you enjoyed it

@MuhammadSuleman-hd1ig 4 жыл бұрын

Nice, Thank you.

@TimWilborne 4 жыл бұрын

You are welcome Muhammad!

@tonyadcock7347 2 жыл бұрын

Very helpful

@TimWilborne 2 жыл бұрын

Glad to hear that

@doughknuts 2 жыл бұрын

Hello! I have a question. I am working on a project that has the PLC talking to a C# app. This is a pill bottle labeling system. There is a photoeye that detects the label passing out of the printer. But its only on for a second, the library used a call method. A call will not catch a second on photoeye. Is there a event send realtime that the app can see?

@NA-ce1kq 3 жыл бұрын

Hi Tim, I'm planning to buy the IP address explorer tool but I want to know if I can I use this to discover the IP address of the controller thru the ethernet switch?

@TimWilborne 3 жыл бұрын

Hi Nilo, you sure can. See application example below. www.theautomationstore.com/how-to-discover-ethernet-devices-on-an-unknown-network-using-plc-tools-sim-ipe-ip-explorer/

@TheOrly89 2 жыл бұрын

Thank you

@TimWilborne 2 жыл бұрын

You are welcome.

@gfdfggghfg2965 3 жыл бұрын

Thanks

@TimWilborne 3 жыл бұрын

You are welcome.

@davidpalmer963 2 жыл бұрын

Morning Tim. my Pops says hello . He is from Beckley WVA., and his wife is from Blacksburg VA.

@TimWilborne 2 жыл бұрын

Small world!

@joebilby1007 2 жыл бұрын

Hey Tim, I do not have an Ethernet port on my laptop, only USB. Is there a USB to Ethernet cable that will allow me to connect to Studio 5000?

@TimWilborne 2 жыл бұрын

Hi Joe, this is the one I use. www.amazon.com/gp/product/B00MYT481C/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=twcontrols-20&creative=9325&linkCode=as2&creativeASIN=B00MYT481C&linkId=5011467e1bb66c1750d72c0b0bfba08c

@nora_adora 3 жыл бұрын

Hey Tim, How can you assign the IP Address from a brand new CompactLogix out of the box without the little tool you used? Thank you

@TimWilborne 3 жыл бұрын

Hi Nora, yes you can!

@nora_adora 3 жыл бұрын

@@TimWilborne I did it! yay!

@TimWilborne 3 жыл бұрын

@@nora_adora Great to hear!

@craigquary4017 Жыл бұрын

I recently got a new computer and when I transferred my Rockwell license from my old computer to new I had to go to Rockwell site and get latest versions of the tools I need to do my job. Needless to say Rockwell does net vend or support RSLogix 5000 anymore and makes you upgrade to Studio 5000. When I downloaded the studio 5000 and factory talk I was also expecting RSLinx classic but they have stopped this as well. Apperently you conect using studio 5000 now and it is slightly confusing for me mainly because the procsess has changed.

@TimWilborne Жыл бұрын

See if this helps Craig kzfaq.info/get/bejne/ptGpdLeiy8XGg5s.html

@hermannelson489 3 ай бұрын

Thanks . Please what to do if we local network (192.168.1.XX)used on the Ethernet card and we have a plant network (10.4.49.XX). Trying to connect but I can’t with rslinx

@TimWilborne 3 ай бұрын

Here is a video to help you out. kzfaq.infoW7Q5ZgvEWiw?feature=share

@ivanblazhenko99 3 жыл бұрын

Hi, Tim. I have a question that stuck in my head and I still didn't get answer yet) Is is possible to send data using MSG from ControlLogix Emulate to Micrologix1100 Emulate throught Channel 0 using COM-0-COM Emulator? What I did: 1. Set up two drivers in RsLinx (for Virtual backplane and SLC) 2. In each Emulate configured Channel 0 and assigned COM ports 3. In Studio5000 built program using MSG 4. Picked "SLC typed write", assigned tag for source element like INT or Dint (16 and 32 bits respectively) 5. Assigned the destination element like N9:0 or L10:0 . My MSG instruction is executing and I see flashing Done bit ( i did MSG through TON) but nothing in Rslogix500 data file.

@TimWilborne 3 жыл бұрын

Hi Ivan, I haven't worked enough with Emulate to know. But hit the basics first, make sure the error bit isn't being set and there is no error value. These would clear the next time you enable your message.

@adriansilaghi6058 4 жыл бұрын

Can a micrologix1100 controller be connected through wireless internet?

@TimWilborne 4 жыл бұрын

Sure, but it depends on what you want to do with it over the internet as to whether it will work. There are lots of different options out there for this.

@mrugeshmistry9224 4 жыл бұрын

Can you upload Videos for Pulse Output Video in Delta PLC?

@TimWilborne 4 жыл бұрын

Hi Mrugesh. I don't have much experience with Delta PLCs but we do have some PWM videos coming on AB.

@mrugeshmistry9224 4 жыл бұрын

@@TimWilborne Thanks for Reply.

@ajmalaja9888 11 ай бұрын

Hello sir...how to communicate Allen brandly(compactlogix) to other plc like omran? Would you upload these related details?

@TimWilborne 11 ай бұрын

I am not that familiar with Omron but I would look to see if it supports Modbus TCP or Ethernet /IP, those would be the easiest ways.

@ajmalaja9888 11 ай бұрын

@@TimWilborne ok thank you sir. But one more thing did you uploaded about the communicate between allen brandly and any other PLC through Modbus TCP or Ethernet /IP,

@TimWilborne 11 ай бұрын

Yes, this playlist has Modbus communications for the Controllogix/Compactlogix PLC in Studio 5000 and the Micro800 PLC in Connected Components Workbench. kzfaq.info/sun/PLUi5cdVq3wTCNyXp_W496Z-td2RPm3nES

@ajmalaja9888 11 ай бұрын

okay thank you sir@@TimWilborne

@Maintenance_Mark 2 жыл бұрын

I did everything in your video and it all worked except once I'm done I still cannot connect to my PLC it does not show up in RS who

@TimWilborne 2 жыл бұрын

Make sure you are pinging the PLC and getting replies.

@Maintenance_Mark 2 жыл бұрын

@@TimWilborne I'm not. I've watched multiple of your videos and done what you show but for whatever reason it's not letting me set the IP address of the plc. When I set the PLC address in boot p it allows me to do it but when I ping that address I don't get a response. I've tried using a USB cable but it says it's not compatible or can't find drivers. I went into my laptops network settings and manually set the IP like you said. Then I assign a IP with the first two sets of numbers the same to the plc then I try pinging it but it just isn't working. I'm starting to think I have a incompatibility issue with my laptop or something.

@Maintenance_Mark 2 жыл бұрын

@@TimWilborne is it possible that the PLC already has an IP address but I'm just not able to see it or find it? Would that stop me from being able to set the IP in bootp?

@suriyat8773 10 ай бұрын

Plc model?

@TimWilborne 10 ай бұрын

This video works with all Allen Bradley Controllogix and Compactlogix PLCs.

@davidpalmer963 2 жыл бұрын

Tim ..PLC Automation Technician David Palmer here. How are you? Can I dowload Rslogix 5.?

@TimWilborne 2 жыл бұрын

You have to purchase a license or it is an option in some of the Studio 5000 bundles. Do you just "want" RsLogix 5 or do you have an actual NEED for it?

@davidpalmer963 2 жыл бұрын

@@TimWilborne No I need... we have 4 automated de- palletizers. All with 1771/A1-B PLC.

@TimWilborne 2 жыл бұрын

@@davidpalmer963 I would reach out to your local Rockwell distributor. It won't be cheap so they can help you find the most economical option. locator.rockwellautomation.com/

@davidpalmer963 2 жыл бұрын

O.k. cool. We have license for 500 and. 5k. We mostly use 7 slot SLC 500. Thanx Tim.