Alpha-6 Rc Build Guide - Step by Step assembly
Рет қаралды 19,866
2 жыл бұрынHere it is! The build guide for the first Arctic cat inspired rc snowmobile that you can make at home! This sled has being in the making for two years. and now you can make one quite easily at home. If there's issues with the snowmobile, let me know, and ill see what i can do to fix it! Free future updates and mods will come too!
Here's where you can get the files :
www.rccreations.shop/product-...
Items to complete is listed in the item description ⬆️
Suggested electronics :
• How to choose your ele...
Ball end drivers : www.amainhobbies.com/mip-spee...
www.amainhobbies.com/team-ass...
If you have a minimum of 200x200 printer, you will be able to print it.
Special thanks to Patrick J for the limiter strap trick and Mikko K for the sick seat clip system.
Music :
Dance With The Dead - B Sides: Volume 1 [Full Album]
@workoutwarrior503 Жыл бұрын
Just built mine! Looks great
@mjetdevelopment 2 жыл бұрын
Crazy good design. I watched the whole video just because of it...
@mstei001 2 жыл бұрын
Hats off to you! Great design!!! I very much look forward to finishing some printing projects and then buying the files. Thanks for all that you do!
@Fr0stByte917 2 жыл бұрын
Great video. Have to make some adjustments to the one I built. Love the jig for the drive shaft!! going to remake using it!
@davidbegeotsr4025 2 жыл бұрын
I'm so glad I found your channel I've been waiting for somebody to make up ready to run snowmobile but there's none out there. Very interesting video nice job sir
@Pascal_Robert--Rc_Creations 2 жыл бұрын
Update : @ 17:43 I said a M2x20, but what fits best is a M2x16 (mistake while recording). Not a big deal, but its something to keep in mind.
@stephansturm8641 Жыл бұрын
Hello. One question, do you still have a upgrade for the Front like a wide kit because it fall over so fast. Big wishes from germany
@fgauvin7 2 жыл бұрын
Vraiment une belle job de design! Tout est pensé et il semble avoir des solutions très créatives pour rendre le produit user friendly! En espérant pouvoir prendre le temps de m'en printer un avant la fin de la saison.
@civicturbod1588 2 жыл бұрын
Made me buy a printer! thank you for making the files available so I can finally have a legit r/c snowmobile always wanted one as a kid. I’ve designed my own versions many many times over the years and modded the Polaris rush. Tried the art attack and The atomic 2000 from Sweden. So much time building one from scratch so I will appreciate all the hard work you have done to allow us to print these out. Thank you
@theironman_man291 2 жыл бұрын
Really nice man great job
@conical420 2 жыл бұрын
Great video!! Very nice thanks apreciate ya!
@jonathanjo4273 2 жыл бұрын
Hâte de l essayer .belle job j ai hâte de voir les performances à comparer mon skeeride
@akura2 2 жыл бұрын
I'd like to see a comparison between this and the SkeeRide Snowmobile.... nice work
@UppfinnarAXEL 2 жыл бұрын
I want more videos of this running in deep snow
@SirSlyBird 2 жыл бұрын
Guess it's time to buy a printer. Nice job Pascal. Like always. 👍
@bubblesrcshed 2 жыл бұрын
Oh my I’m in love I’m an Arctic Cat man 👍
@TheSkidooslayer 2 жыл бұрын
I love your channel.. if you sold these ideas and worked with A big company like traxxis or even these snowmobile companies you’d make millions. I so badly want one and hope someday they can be mass produced
@alburvill7034 2 жыл бұрын
Looks awesome sadly with out printer on computer there isn't much chance of getting one . Have enjoyed following this idea over the past few years
@ToastyProductions. 2 жыл бұрын
Can we get a comparison video between the alpha 6 and the g4? Which one Handles better
@CanadianTexaninLiguria 2 жыл бұрын
One of dem dere quebecers;)
@0168keke Жыл бұрын
Is there any way to get other body types like polaris or Yamaha ?
@zanderluckow1182 2 жыл бұрын
Is there anyway to get one if you don’t have a printer
@theironman_man291 2 жыл бұрын
How many printers do you have? And what’s your favourite printer?
@Pascal_Robert--Rc_Creations 2 жыл бұрын
Prusa mk3s is the cadillac of printers. Thats why i have 4 of them :) And a modified tevo tornado for the flex material
@ssavard4938 2 жыл бұрын
Allo pascal ! Ton fil d'assemblage pour la track semble être en allu tu prends sa ou ?
@Dylanjhanke 2 жыл бұрын
What size in diameter is the brass shaft for the rear skid? Thank you. This is amazing. I can't wait to build mine!
@Pascal_Robert--Rc_Creations 2 жыл бұрын
3mm exactly👌
@Dylanjhanke 2 жыл бұрын
@@Pascal_Robert--Rc_Creations Awesome , thank you. Im just about done with my build. I have everything except a battery. What battery do you recommend? Im nervous about ordering one that wont fit.
@maihhel3721 Жыл бұрын
these things look awesome but one question i have is why doesn't anyone print the track out of tpu? wouldn't it be more durable?
@Pascal_Robert--Rc_Creations Жыл бұрын
Its harder to spin, builds up more heat, wears up the skid faster. Essentially, everything appart from the track lasts less, and you have less performance Use a good track design, and quality materials, and the track will lasts several seasons
@olduommamarakatt9941 Жыл бұрын
do you seel them to???
@aidenwright661 2 жыл бұрын
How much did all this cost?
@aidenwright661 2 жыл бұрын
How much does it all cost
@cdoran841 5 ай бұрын
ok where do i find out how many of each i need to make like how many track parts do i print i cant find that info
@Pascal_Robert--Rc_Creations 5 ай бұрын
Most of the parts apart from the track is only one time. You need 35 track pieces. Just with that information alone you should be good to go.
@ethanolsen2527 2 жыл бұрын
I was wondering if you are ever gonna reslease a build kit for this sled that has bearings and screws
@Pascal_Robert--Rc_Creations 2 жыл бұрын
Yes, i will
@ethanolsen2527 2 жыл бұрын
@@Pascal_Robert--Rc_Creations when do you think it will be available
@lcooke199 2 жыл бұрын
take my money!!!, where can i buy?!
@monteman59 2 жыл бұрын
You should start selling kits I would buy one
@levilie3200 8 ай бұрын
Which kv for the motor do you recomend??
@Pascal_Robert--Rc_Creations 8 ай бұрын
Somewhere between 3000 and 3800kv is where you want to be on 3s
@epgpschwank4766 2 жыл бұрын
Hey man would you be able to build me an alpha and I will pay the price Buy it
@PACK3NPANDA 2 жыл бұрын
What kind of printer do I need? I’m not experienced at all but I LOVE RCs and my passion is snowmobiles. I NEED ONE. So I will buy one but I don’t know where to start. Any tips????
@rccnc8678 2 жыл бұрын
The cheapest option.
@austinschaub2740 2 жыл бұрын
I have an ender 3 v2, it has a smaller bed so u cant print the full tunnel. He has a 2 piece tunnel option but im having nothing but trouble getting it to print and stay flat
@rccnc8678 2 жыл бұрын
flying bear ghost 5
@rccnc8678 2 жыл бұрын
@@austinschaub2740 I live in Russia, it will not be right, look for someone closer
@jasonjones4891 2 жыл бұрын
Take my money. Seriously. I just don't have time to build. I'd pay all the money
@billbeenie9732 Жыл бұрын
I’ll sell you one
@highstrung_lifestyle 2 жыл бұрын
What would it cost for you to make me 2 of these tracks?
@workoutwarrior503 Жыл бұрын
What should it sound like? My seems clunky and loud?
@Pascal_Robert--Rc_Creations Жыл бұрын
Post it on the fb group. Lets see if we can spot something
@workoutwarrior503 Жыл бұрын
@@Pascal_Robert--Rc_Creations ok thanks pascal, however that problem is gone but the belt keeps coming every 5ish minutes l. Other than that it is running very smooth noe
@Yamasaki965 6 ай бұрын
Yamaha professional please
@Pascal_Robert--Rc_Creations 6 ай бұрын
You can also do a yamaha mountain max with this kit
@garrettgt3020 6 ай бұрын
Combien de kv que vous conseillez dans le Castel création?
@Pascal_Robert--Rc_Creations 6 ай бұрын
Entre 3000 et 3800kv
@MALVIN0015 2 жыл бұрын
Please start to sell these. I want one soo mutch
@martinalexie8300 Жыл бұрын
I'd like to try your snow mobiles can you send me one for testing in Alaska!
@kelenr6236 2 жыл бұрын
Where did you get the 5mm reducer sleeve?
@Pascal_Robert--Rc_Creations 2 жыл бұрын
Amainhobbies.com
@billyjaggard9696 9 ай бұрын
Wat is a good setup to put in mine
@Pascal_Robert--Rc_Creations 9 ай бұрын
Spektrum combo 85A, else a castle creations 1410 combo is also a great pick for a bit more power.
@billyjaggard9696 9 ай бұрын
@@Pascal_Robert--Rc_Creations ok thk u
@t_boys_official4604 2 жыл бұрын
Est-ce que tu en vend?
@garrettgt3020 6 ай бұрын
Un moteur hobbywing QuicRun Fusion PRO - 2in1 FOC 2200kv j’ai en stock cela pourrait tu être bien
@Pascal_Robert--Rc_Creations 6 ай бұрын
Sa marche, mais le rpm est bas. Tu aura pas tant de power que sa, sourtout pour le prix
@travisfinlayson4137 6 ай бұрын
do you sell these RTR?
@Pascal_Robert--Rc_Creations 6 ай бұрын
Yes I do, hit me up on the website! Www.rccreations.shop
@aklimitless9072 2 жыл бұрын
Would you sell a roller. I don't own a PC and 3d printer.
@isae78080404 4 ай бұрын
Quel dimensions les bearings? Merci.
@Pascal_Robert--Rc_Creations 4 ай бұрын
Deux 5x11x4 et six 3x7x3 bearings
@isae78080404 4 ай бұрын
@@Pascal_Robert--Rc_Creations Merci!
@MakeFamous88 2 жыл бұрын
Can I buy this ? Lol
@eliasmoller9649 2 жыл бұрын
can you make a snowmobile for me ill pay to
@user-nf7en1km9v 2 жыл бұрын
If it's not difficult for you, you can send me 1 snowmobile
@garfl911 2 жыл бұрын
Et le français vient quand ?
@Pascal_Robert--Rc_Creations 2 жыл бұрын
J'avais pas prévu faire sa🤔 est ce que je devrais?
@nosatvsmuding5467 2 жыл бұрын
@@Pascal_Robert--Rc_Creations oui stp Pascal le mien arrive pret fait des vidéo français
@garfl911 2 жыл бұрын
C est comme cela que nous allons perdre notre langue…mais l argent run le world!
@Pascal_Robert--Rc_Creations 2 жыл бұрын
Je vois pas le lien... La langue de communication universelle c'est l'anglais. Si c'était l'espagnol, je ferais des vidéos en espagnol, c'est tout
@UppfinnarAXEL 2 жыл бұрын
@@Pascal_Robert--Rc_Creations I live in Sweden so I like that you make the videos in English. It is good that everyone can understand.
@airwolf1 4 ай бұрын
pourais je te parlé en privé svp, je suis tres interresséé
@Pascal_Robert--Rc_Creations 4 ай бұрын
Envoie moi un message sur le site : www.rccreations.shop Au bas de la page d'acceuil Pascal
Pascal Robert - Rc Creations
Рет қаралды 3,8 М.
Pascal Robert - Rc Creations
Рет қаралды 15 М.
Pascal Robert - Rc Creations
Рет қаралды 126 М.
Super Cute Milk Tea Dog
Рет қаралды 35 МЛН