Followed your instructions. Couldn't get the back off our 48" Bravia (now 10 yes old) but managed to get to the part concerned. Cut wires 11 and 12. Working again. Brilliant stuff. Thanks so much for sharing. 👍🏼

Thanks for this fixed our old bravia kdl. Hardest part of the whole thing for me was getting the back of the tv. After that easy had to watch your vid a couple of times to select the right wires. But once I saw that it was the ones at the opposite end to the only white wire, simple.

Year 2022. Bravia 40” KDL40EX700. By following the instructions, I cut the 11’th wire. (White cable is first. Count against this.) The waste TV started to work. Thank you man. God bless you.

This worked on my Sony BRAVIA KDL55HX800. Thank you so much for doing this video and for sharing your knowledge.

This fix worked for me. Thanks! Keep up with the good work

Great to see your video. I have the same problem with my Sony Bravia TV blinking red light 7 times. Grateful if you could tell me the detail of the wire disconnecting.

You my man are an absolute legend!

This fixed my Sony KDL-55HX800 (7 blinks) by removing wires 11 and 12 from the plug. Almost ordered a new power board. Glad I didn't. So far so good.

I’m having issues with my KDL-52EX701 it’s got 6 blinking lights? Do you have any idea how to fix?

Your a Legend Mate🤛🤛🤛, luckily didn't have to remove any of the pins, worked for me!

Thank you so much ! You saved my TV

Hi @alwaysafix i have a Sony Bravia model KDL 40VE5 and when plug in to AC the Stand by led is red then press power button and red led is off and green led ON few seconds a tic sounds and green led is off then red led is on. TV not start images no sounds, no pictures, no led blinks. I repeat turn on TV and the same happens. What do you recommends? Thanks

Love the vids! Challenge: I have a 2012 Bravia KDL-46BX450 and sensor only has 10 cords. Do you suggest I start from the far right and start disconnecting? When I click the power button, the Sony logo comes on then the screen goes black and stays that way. Any suggestion before I recycle my favorite TV would be great!

my sony kdl-46nx700 has 6 blinking how to solve o and i bought new led strips still no lights please help

I also have the same issue buy on a different model, so it's either swapped the LED driver board or just cut the wire and ground it?

Thank you so much, you just gave my 10 years old TV some more time ! Worked like a charm.

Hello I watched your KZfaq video sir and I'm very impressed with all your videos I have a Sony Bravia XBR 758 940c and Z I'm getting 4 blinking red light Saturday night I was watching TV and and then on my her to the entertainment still going like the movie was playing when I woke up but the TV was off and I seen where it was blinking for red LEDs underneath the TV screens so I turned it off right away and then I turned the power conditioner off and I repower duck and the TV started back working again and I watch TV from Dad Saturday morning all the way till like Monday morning and then I started watching a movie with a TV screen was going black and then end up program was showing dinner was going black and then all the sudden I figure let me turn it off I unplugged it and then I power power down the power conditioner and I plug it back up and then all the sudden the red blinking light reappeared with

Thank You much Sir very helpful video long live

Took out the back cover to fix volume problem. Fixed the back cover but now I can not plug HDMI cable as the cover has not gone down completely. The cover doesn’t allow the plug to be fixed. All cover bolts are tight. Can you help?

Dear sir our Sony tv NSX32GT1 has good audio but no vedio/picture. Now when switched on red light blinking 3 times instead of green light to connect with my set. Kindly suggest and help with the solution.Thanks.

Might you know what 6 blinks is?

Anyone know how to fix two blinks on a 2011 Bravia KDL-40EX724? I googled it and it they say it's some over current protection unit that's gone into standby mode.

You are awesome! this worked for me! I disconnected 11 and 12

Mine isn't turning on n have tried ur procedure is there any other way u can help me 3blinks

Hi. Which number wire do I need to disconnect for 6 blink error?

I have all of those gray/white cables disconnected. Is there Any way to know in which order i can put them Back?

Hi. Do you perhaps have all the blink codes or where can I get them please.

Any help?, I have a screen with a single red flashing light

I just LOVE your accent!

Hi i have a KDL-40R470B SONY 40" which is giving 6 blinks is there anything i can do to fix it. Thanks

Thanks for uploading video, I have fixed my tv .

good video Bru. Hope it saves my Bravia 😬

Hi, I have a Sony Bravia XBR-55X807E, are about 1 minute it blinks 7 times then powers off. I tried removing pins 11 and 12 but it still powers off, can you help?

Hi, I have a model KD- 7559000B which is about 7 years old 75 inch great TV but recently flashing 9 times and shutting down, l have cleaned the vents and also have a fan directed at the back of the TV but the shut down is more frequent. Appreciate any tips like removing the back and maybe vacuuming the inside?

Hi sir, my tv is KLV 40S550A, having same issues with 7 blinks. Ive remove the back cover but im seeing HLSA board which consist of 10 wires only. Im confused

I am having the same issue suddenly for last 2 days Tv was off ( not on standby ) from last 10hrs but when I unplug power cord and set top box and re connect power cord tv works fine then I reconnect set top box watch tv for works without any problem

I had to unplug the whole jack instead of just cutting some wires, then you could turn on the TV using the power button on the back of the TV, and use an app to control the TV instead of the remote. Note that if hanging on the wall, the vents must be left open on the back of the TV, it is best to put it on the table

How to fix 8 flashes on kdl40w5500?

My Sony LED TV giving error ...Red light blinking 6 times. KDL42w845a Pl suggest what may be the fault?

Hello sir, I am having an issue same as this but with 6 red blinking lights

sir my tv is also sony KDL - 40EX710 it has red lighting problem i removed the remote circuit tv works fine Which number of wire do I have to cut?

Having same issue 5 blinking lights wont power on 8 seconds in it turns off and blinks red light 5 timez pause 5 times pause etc

Mine only has 6 wires any help?? Thanks it’s a Sony kdl-40r453c

I need help with mine it’s a smaller than a 32 inch but it has the same problem and I would like to fix it myself

Wega Sony 40 inch 10 blinks red please help.

Having issues with four blinking lights. Any recommendations?

I have kld46x3100.blinking 8times. Does anyone know which wire needs to be disabled? Thanks in advance

Sit my Sony bravia klv ex310 32 Inch led tv red light 5 time blinking 1 time flash display how can I fix sir pleas

Hi thank you for this great video. Can you please send me the schematics of the wiring. Thank you.

Can you please send schematics and which wires to disconnect. Thank you very much

Brilliant yes it worked . Thank you I had to butcher the back panel to get to the 11th 12th wire but a little tape should make it nearly as good as new😅.

What do I do if my thing just stays red

I have same issue with same model. What should I cut? Pin 11 and 12 or Pin 11 only?

Hello I have a Bravia Sony 2018 it's 65 inch and it keeps turning off and on on its own. I can't do a hard reset because it turns off. I pull wire 11& 12 just in case it was the sensor because I believe it does have to do with power saver. Is there another one I can try to pull ? At this point we are ready to trash it, but, of I can fix it that would be awesome!

The conector of the board on my Bravía KLV-40BX400 has only 10 pins.

i unplugged the 1 and 2 cable and it work but without tv controller (my mistake) then do it with 11 and 12 and i have watch 2 movies since then , thanks master! my tv 55hx800

Thank you so much sir I try it and I got it right . Much love sir....

Hi there i have sony ex56-kdl bravia with 3 blinking lights any help please

Hi. I think I fucked up the cables and now it doesn't even turn on. How or where can I send you an email to get the schematic? Please help.

ty sony kdl46hx800 how did you manage to discover the defect?

If you were like me & couldn't even get your TV to boot far enough to do a hard reset, your in trouble. You see, I turned the Back-light (which was failing) from 5 to 7 and the TV instantly shut down & went into an endless boot loop. Well, just get yourself the brightest LED torch you can find & shine it straight into that auto light sensor on the front of the TV at boot up. This sucks the TV into thinking that it is as bright as the sun in your lounge room and it turns down the back-light to 5 automatically at boot up. Once that happens your TV will start & you can then quickly do a hard reset and once that is done go to options & turn the back light down to 4 or leave it set at 5 but no higher. Then turn the brightness up to max or near max & you won't even be able to tell the difference. You TV will work properly for a few months more, but U better start saving for a new one because the back light (or the sensor) is already past its use-by date & it won't last forever.

Thanks so much

Different model KDL-43W800C. White screen then backlight turns off (black screen) and 5 red blinks. Cold blower on the sensor slots, bottom center of the TV, to release probably dust particles. Now working fine.

Hi just tried the removing remote sensor for 4 blinks sadly no success the lamps seem to be struggling before set switches off . Do you advice for 4 blinks? Thanks for sharing

I am facing this issue with Soni Bravia 40" but unsure about which wire to cut

Hi @alwaysfix I disconnected 11 and 12 and my tv works but my remote now not working, how to return my remote TIA!

I have a Sony Bravia 65x800g that's giving me 6 blinking lights (LED backlight error code) and, upon taking it apart and testing the backlights, I found that they all seem to work fine. Now I'm not sure if it's a PSU issue or something to do with the tcon.

I pulled 11 and 12 and now My tv stays on but remote won’t work. Does this affect the remote too?

No power no red lights where can I get mother board

Hello would this work for my KDL-40R470B SONY 40" which is giving 4 blinks.

Hi sir I'm going through the same situation here The only difference is mine is blinking red light 5 times so please I really need your help

its work nice job 👍

omg, have my babies, it worked flawlessly :0

hallo my sony bravia 4k tv Sony KD55XF9005 4 times blinking red light what now????? thank you

I have the KD-65X9000 red light flashing 7 times. same procedure u think? Just happened for the first time today.

Don't you have any tweezers? Removing that one wire with your fingers seemed to take forever.

Sony KDL46EX710 Everything works now! Thanks a MEGA!

If I remove this piece, can I keep it out? I don’t use a remote with the TV so will it still work okay without putting this back? Not sure if I can do the wire part, but I’ll see!

sony KDL-40EX500 with 6 led blinks . used eBay inverter board same issue (ordered another) ccfl backlit. Going to try this fix. Thanks.

Having the same issue with a Sony Bravia KD-60X6700E.

3 blinking problem sony bravia kdlex-46

It works for me. ❤

👍

Please help me my tv blinking red light 5 times

????????

Ours is a non smart TV ours do 5 blinks

My sony bravia just went blank

My Sony had 11 wires

Freakin garbage product. Watching the damn red light blink as we speak. Trash

First of all start talking fast. !!

your email please