Amazon's Cheapest Paint Booth - Pimp My Dad's DREAM Truck Pt 8

Рет қаралды 32,722

Күн бұрын

We couldn't find anyone to paint this Bleepin Yota so we bought an inflatable paint booth and painted it at home. For those asking in the comments, here is the booth we used: amzn.to/48Y4gqZ
*********************************
Pimp my Dad's DREAM TRUCK Series:
Part 1 - Next Build: • Next Build - Pimp my D...
Part 2 - Tear Down Stage: • Tear Down Stage - Pimp...
Part 3 - Rebuild Phase 1: • Dad's Toyota Axles Nee...
Part 4 - Front Bumper and Fender Flares: • This Bleepin Yota is C...
Part 5: How-To Build a Roof Rack: • How-To Build a Roof Ra...
Part 6: Re-gear Day: • Its Test Drive Day for...
Part 7: Restoration out of hand: • Toyota RESTORATION has...
*Part 8: Nobody Would Paint Yota: • Amazon's Cheapest Pain...
Part 9: Yes I'll be at the Offroad Games: • Yes I'll Be at the Off...
Part 10: New LEDs, Old School Charm: • Holley Retrobright LED...
Part 11: World's Most Expensive Toyota Pickup: • All Finished Up - Pimp...
Part 12: The Reveal: • Surprising My Dad With...
*********************************
Get 20% OFF ONX GPS Maps: Enter code “bleepinjeep20” at checkout
Get 15% OFF Adam's Driveshafts: Enter Code "BLEEP15" at checkout
Get 10% OFF PowerTank: Enter Code "Bleepin PT" at checkout
Get 10% OFF Barnes 4WD: Enter Code "bleepinjeep" at checkout
Get 10% OFF Iron Rock Off Road: Enter Code "bleepinjeep" at checkout
Get 10% OFF Bullet Point Mounting Solutions: Enter Code "bleepinjeep" at checkout
Get 10% OFF EZ Flate: Enter Code "BLEEPINJEEP" at checkout
Get a Free Pre-Filter for Thor Cowl Intake: Enter Code "BLEEPINJEEP" at checkout
See all BleepinJeep Discount Codes at: bleepinjeep.com/member-discou...
*********************************
If a BleepinJeep video has ever helped you consider returning the favor by:
• Supporting us on Patreon here: / bleepinjeep
• Becoming a Member here on KZfaq: bit.ly/2wGeSec
• See what we recommend on Amazon here: amzn.to/2kc6Syn
• Buying a T-Shirt Here: www.bleepinjeep.com/store
• Or Just leaving a kind comment on FB here: / bleepinjeep
*********************************
This product is meant for entertainment purposes only. Your mileage may vary. Do not try this at home. Void where prohibited. Some assembly required. For off-road use only. Slippery when wet. Batteries not included. Do not use while operating a motor vehicle, heavy equipment, cherokee XJ, wrangler TJ, wrangler JK, or any Jeep vehicle, especially the newer Fiat ones. How-to videos may be too intense for some viewers and children under 30 years of age. Please remain seated until the 4x4 ride has come to a complete stop. Studies have shown viewing these videos causes increased cancer risks in laboratory test people. I am not a professional, I have no training, I'm not even particularly good at horse whispering. Don't believe everything that you know. Please keep your hands in the vehicle at all times. Do not tap on glass. Do not eat anything that has been on the floor for more than 3 days. Keep your hands to yourself. Not to be taken internally. Reproduction strictly prohibited. Driver does not carry cash. Objects in Bleepinjeep mirrors may be farther than they appear.

Пікірлер: 179

@tengdayz2 4 ай бұрын

I don't love how some people criticize work, like it's they themselves (instead of the operators) that have to be happy with results. Good job for not being perfectionists and leaving good enough alone, so that you can keep on with the journey.

@granitesand78 4 ай бұрын

I love that you couldn’t find a paint shop so just did it yourself. Josh is a gem

@bleepinjeep 4 ай бұрын

A true ruby! Or maybe a diamond… in the rough 😃

@lunaticeg5420 4 ай бұрын

I truly hope you two understand how much you guys help folks. Thank you Matt and “Just Josh”!! 🤣🤣

@jamestakemura6772 4 ай бұрын

My dad still logs everything done to his “new truck” too👍🏼 he always has, with every vehicle he’s owned. OLD SKOOL💚💚💚👍🏼

@edwardsimmons3721 4 ай бұрын

That’s an amazing amount of amperage to blow a main fuse on the power line side.

@aaronmcconnell7358 4 ай бұрын

You did a great job "just josh"😂 I'm sure robbie would approve.

@delinquentdesign 4 ай бұрын

You should wrap some Visqueen around those LED lights to diffuse the lensing that those LEDs are creating

@Comil1983 4 ай бұрын

I love the extra effort of combining the log books and adding your work into that. It's a small detail that will mean alot!

@rorypatrick7921 4 ай бұрын

Qw had one and had put a simple pvc pipe frame inside in case it deflated which it did when one of the tubes split when a car was drying the pvc saved the paint job! Just a thought for next time!

@freeidaho-videos 4 ай бұрын

Congratulations on jumping through the never ending hoops needed to get a patent. Very hard work for an individual.

@bleepinjeep 4 ай бұрын

Yes, thank you. Seems like anything the government has its hand in becomes that complicated.

@MrBillsfishin 4 ай бұрын

Great progress on the truck and updating to a new service history book was a nice touch i think your Dad will appreciate it because he will know every detail of what you both did to it.

@bleepinjeep 4 ай бұрын

I hope so too! I’m glad I was able to combine the 3

@Yokosprojects 4 ай бұрын

To insure your seat covers are tight always glue a thin layer of foam over your worn out compressed foam. Use a heat gun at a good distance to heat vinyl covers and smooth them by gently passing over them with a microfiber towel. Be sure not to get it hot enough to make the vinyl real soft.

@Jan-pw4po 4 ай бұрын

Extra foam needed in there, other than that, great job

@wendellharker6690 4 ай бұрын

Looking great can't wait to see it finished thanks for letting me watch 👍.

@bleepinjeep 4 ай бұрын

You bet

@brianward3944 4 ай бұрын

Congratulations on your winch line patent. You've come a long ways from the early days of bleepinjeep. Great job Josh I appreciate the painting tips!

@bleepinjeep 4 ай бұрын

Thanks 👍

@YouTubeBinging 4 ай бұрын

Congrats on the patent, your channel's success, and personal success. ❤ this channel.

@bleepinjeep 4 ай бұрын

Thank you so much!

@Letstallklife1954 3 ай бұрын

Matt the fab josh the painter. Great team

@mjw8890 4 ай бұрын

Love me some pot stickers!🤤🥟

@jamesbigham9036 4 ай бұрын

Good morning would it be possible to see more videos of Josh paintings? In my opinion he is a natural and did really well. I love how he was explaining things. I am a subscriber to Robby's channel so I understood what Josh was talking about when it comes to painting. Your dad is going to love the truck that is for sure

@bleepinjeep 4 ай бұрын

Noted! I'm sure we will paint something again. The Scorpion 2.0 was painted by Josh as well if you havent seen that series.

@benrossbach6501 4 ай бұрын

Josh has become the boy in the bubble.

@rafailgrepolis 4 ай бұрын

Josh, I liked the paintjob tips! Good job!

@donaldhalls2189 4 ай бұрын

Personally I would have had the input fan's running on the generator, if you have it running anyway, that way it,wouldn't collapse, thanks for sharing, all the best to yous and your loved ones

@mh-qq2hj 4 ай бұрын

You guys do a hell of a job of figuring things out as you go! I’d rather watch you guys do that than watch some edited video of everything going perfectly like clockwork. After all, you ain’t building a watch!

@bleepinjeep 4 ай бұрын

Thanks 👍. If anyone ever has a video that went perfect then they just lied and edited out the mistakes!

@JonnyDIY 4 ай бұрын

Beautiful work Josh! 👏💕👍

@DoctorHayduke 4 ай бұрын

At 2:39 I loudly said, to the tv, "You will never ever ever in a million years get that thing back in its bag." 😂😂😂

@mjw8890 4 ай бұрын

Nope😂

@bleepinjeep 4 ай бұрын

Well you were right!

@JonnyDIY 4 ай бұрын

I struggle to get an air mattress back in its original back EVERY damn time I use it 😂🤦‍♂️

@JeffreyJohnston724 4 ай бұрын

congrats on your patent !!! I remember my 1st patent , I have over 30 of them now . If you ever sell your patent make sure you have one of the major banks do a full spread of the projected income for the life of the patent .then you ask for a up front payment of any where from 5 to 15 % of the patent value then ask for a royalty on every one sold .I usually ask for any where from 6 % to 15 % on each item sold and make sure its based off the gross not the net . Have a good idea of what you want and have a bottom line of what you accept before you ever enter in to negations. and if they will not meet that bottom line, you then walk . just clearly state too the possible buyer that their offer is well below what you are willing to accept ,and thank them for their interest in your product . They will either up their offer or they wont, but dont flinch .after all you are in the driver seat and they want what you have .after all you are all ready making money off the product and selling might not be what you are interested in .

@bleepinjeep 4 ай бұрын

Wow, 30 patents that’s awesome. What are they for? I wish I could have picked your brain a time or two while working on this one.

@JeffreyJohnston724 4 ай бұрын

I specialize in inventing for the manufacturing industry making the processes faster more reliable and also some products that perform inline automatic testing for quality control .also some products for the rail industry.@@bleepinjeep

@jasonadams4344 4 ай бұрын

FYI, most people who use those inflatable booths build an inner skeleton out of pvc to make sure it doesn’t collapse on your work in case of a power outage. You can also hang lights from it. Love the channel!

@bleepinjeep 4 ай бұрын

Might do that next time, my current issue is storage. It’s still the size of a large pallet when bagged up.

@jasonadams4344 4 ай бұрын

@@bleepinjeep I understand what you are saying. I’m in the same boat. I have a good size shop but it’s full of projects. I like the idea of a booth you can put up and take down but not sure if I want that hassle. I have a porch on the end of my building that I’m going to extend and then close in for a paint set up. For what you guys did, the inflatable booth was a perfect solution. Great job on your dad’s truck being all DIY. 👍🏻

@JeffreyJohnston724 4 ай бұрын

I really liked you showing the whole paint process I have shot a few cars but actually learned a few things

@donaldhalls2189 4 ай бұрын

Great job, Dad will be ecstatic, thanks for sharing, all the best to yous and your loved ones

@bullittdog4352 4 ай бұрын

Bubble boy! Pro paint job for sure!

@ephjay6t87 4 ай бұрын

Just FYI the paint to repair the interior plastic is probably SEM Color Coat "15303 Graphite". It matched my '87 Land Cruiser and is holding up perfectly for 3 years now.

@bleepinjeep 4 ай бұрын

Is that blue?

@ephjay6t87 4 ай бұрын

@@bleepinjeep well, it looks grey to me, but so does my truck. Toyota says it's blue. Squint your eyes a little? 😁

@LightningGB93 4 ай бұрын

Mat you should add in random notes on how you love your dad and think about him

@MaximvanWijk 3 ай бұрын

And after painting, you can throw a party in there 🎉

@bobbellew9240 4 ай бұрын

Looks like Josh did a great job

@wayneullman5079 4 ай бұрын

What about adding some foam to the center portion of the seat back to take up the extra material?

@440levoy 4 ай бұрын

I have one of them. It works very well. Make sure you have a good ventilation. They will be over spray coming out

@bleepinjeep 4 ай бұрын

We may have lost a few extra marbles

@lef760 4 ай бұрын

Reminds me of that scene in ET

@PONO-go3ee 4 ай бұрын

That’s Seat Cover looks like a 60’ 70’s Domestic Car When Plastics was Being Experimented with I-Recall Seeing Some Metallic Blues With piping Some Metallic Reds Green Vinyls 🤣😂

@brianschmidt2747 4 ай бұрын

😮Toyota sells original "old new stock " vinyl seat covers. I bought the cheaper vinyl and same issue. Extra material only an inch but not very tight. Bought from Toyota and brother it fit. Pricey very but damn it was awesome. Toyota logo too.

@Fix_It_Again_Tony 3 ай бұрын

Congrats on your patent, Matt.

@JamesCook-rf8tu 4 ай бұрын

The log book is pretty cool.

@Garth2011 4 ай бұрын

Seems to be one of two things with the back of the seat cover. They sewed it taking into consideration the foam padding was "new" vs old and shrunken. Or they simply had measured incorrectly before sewing up the seams. I would contact the seller with a picture of the installed back cover and maybe a shot of your foam cushioning...maybe they have some solutions or will send out a replacement.

@bleepinjeep 4 ай бұрын

Ended up doing exactly that and sent them the old vinyl and they fixed the pattern and sent a new back.

@Garth2011 4 ай бұрын

@@bleepinjeepIt really pays off to deal with a great vendor.

@jtcustoms1182 4 ай бұрын

Awesome. I had to do that a few times. You would never have got that big wrinkle out. If you have a steamer that is the best thing to use to sretch your material as it won't burn the material.@bleepinjeep

@isomer13 4 ай бұрын

Really nice work. Awesome paint, Josh. Thanks, guys.

@Page5framing 3 ай бұрын

My neighbor got one of these paint booths. They are awesome!

@jadebrecks 4 ай бұрын

I almost wonder if you could bend up some conduit inside to make a halo as a safety back up?

@bleepinjeep 4 ай бұрын

Probably could but then will have more to store.

@jtcustoms1182 4 ай бұрын

Just use the pvc and you could dismantle like Lego until you need it again.

@doughaven-rf8id 4 ай бұрын

Possibly rent out the paint booth as a bounce house for kids' birthday parties (maybe don't mention it was used for painting a truck) recouping the cost of the booth.

@4wdtennessee459 4 ай бұрын

A pair of snapping pliers does great at opening up the hog rigs if you wanna save them.

@bleepinjeep 4 ай бұрын

The pliers I got came with plenty of new rings so I used those instead.

@4wdtennessee459 4 ай бұрын

Thursday at work I had to change the foam out on a seat and I had to reuse mine so that when I figured out that works good lol

@tacticalleather766 4 ай бұрын

Put steam on the foam! It will expand

@triadxtechnologies 4 ай бұрын

I absolutely love that color. I really want one of those older Toyotas.

@anthonylee2099 4 ай бұрын

Nice booth.

@teemutarkiainen9887 4 ай бұрын

congrats for the patent!

@RORAdventures 4 ай бұрын

Great work. Congrats on the Patent.

@robertr4193 4 ай бұрын

Your dads pickup is coming along pretty well. Hopefully you will have more use of the blow up paint booth. I'm pretty sure even if it is a plastic blow up item it was not all that cheap to buy hopefully it can be or more use.

@bleepinjeep 4 ай бұрын

It’s not cheap but I’m sure will last a few years at least.

@jeffmosley4043 4 ай бұрын

Your Dad is going to love it. This is what we all should do for our parents. It doesn't have to be a car it could just be something they like. Thanks for the video stay safe guy's.

@ryanreaves1203 4 ай бұрын

This intro, man, I was dying!!!

@Thexkidd 4 ай бұрын

I want to see the orange machine on the trail.

@MarkoMygun 4 ай бұрын

Fine job guy's, I really think your dad is gonna love what you've done to his truck. And you have really increased the value of it also. Can't wait to see it done. Thanks for the video guy's can't wait for the next one.

@ggalland1 4 ай бұрын

Looking awesome guys! I think your Dad is gonna love it! Thank you for sharing

@jimmccabe801 4 ай бұрын

This is my favorite build because of why you guys are doing it.

@garychaiken808 4 ай бұрын

Great job guys. Thank you 😊

@XCHANGEDAVE 4 ай бұрын

Wahoo, looks awesome

@steven.h0629 4 ай бұрын

Gorgeous .. 👍😎✊

@darrinrebagliati5365 3 ай бұрын

I was thinking a few 2x4s and some heavy plastic would build you a decent paint booth last episode! This is a something I hadn't thought of. I've built several 'paint booths' in much worse shops than yours for a buddy of mine. They won't fall down if the power goes out! Josh, were you a bodyman in a previous life??

@donaldperry5046 4 ай бұрын

Upstate New York. Looking good

@123chupadero 4 ай бұрын

Nice video...fun to watch the process- Jack, no no, John- no no, I mean Josh- nice paint job!

@bleepinjeep 4 ай бұрын

Thanks 👍

@kevinsouerdyke3016 4 ай бұрын

That seat upper looks like it might be slightly banana shaped, where the top is curved and therfore compressed. I wonder if you spread the upper a bit, if that cover would fit.

@shawngarfield7773 4 ай бұрын

Great job!

@cheycasters 4 ай бұрын

Congrats man!! 🎸🎸🎸

@thomasleonard9685 4 ай бұрын

Lunch lady brought bigguy food today!!!! No chiki nuggies with ketchup????? Just playin

@miked5789 4 ай бұрын

I got a paint-buzz just watching this video.

@tonypatrick9362 4 ай бұрын

Nice job guys I think your dad will be proud of you and to drive and use this truck

@ChuckBruton 4 ай бұрын

One of your better episodes.. well done !

@lynnvinzant9955 4 ай бұрын

What I want to know is, did you get the paint booth back in the bag. Great job, thanks for sharing.

@VC-TV 3 ай бұрын

Boom instant paint booth! Keep up the great work guys,i work on jeep xjs and this inflatable paintbooth caught my attention

@VC-TV 3 ай бұрын

Heres a better idea though, back up the vehicle your going to paint in the garage, set up the paint booth outside of the garage door and then drive into the paint booth, when your done paint, just back up into the garage again and dismantle the booth

@sagoodman988 4 ай бұрын

That is awesome ❤❤❤

@zacmurch7675 4 ай бұрын

great job with your winch line. paint job looks awesome. someday i wish to get myself a freedom winch line.

@its_me_JZ 4 ай бұрын

Great work, "Just Josh"!! 😂

@brianhowe2078 4 ай бұрын

You should have more air going in than going out. This then pressurises the area which pushes dust out. We do the same with server clean rooms.

@bleepinjeep 4 ай бұрын

Yes, that's the goal

@benjy6358 4 ай бұрын

congratulation on the patents ! those recovery gear looking good..reasonably priced too..

@bleepinjeep 4 ай бұрын

Thanks 👍

@scottburrow8717 4 ай бұрын

Panel painting is not good sometimes unless you mix all the paint at once. May get a slight variation in color painting like that. But y’all did a great job! 👏

@joshshine2489 4 ай бұрын

It was all mixed....just had to reduce. Thank you!!

@JeepLJ3 4 ай бұрын

@BleepinJeep, What about us with 8274's, you dont have a line long enough!

@bleepinjeep 4 ай бұрын

That's why we make the 12' splicable version

@jameskendrick573 4 ай бұрын

Pvc pipe make a frame put the pipe in the light hangers won't fall put on the edges and it won't take up space

@dalecronk4377 4 ай бұрын

Looks great, I’m going to send you all of my toys to build and paint

@diegokleinman8774 4 ай бұрын

The hose for the fan that pushed air in was twisted that’s why it wouldn’t stay full

@peterbaetens5003 4 ай бұрын

@robbie layton take care - bleepinjeep has their own paint booth now 🤣🤣 blow - tack and static 😂josh

@bleepinjeep 4 ай бұрын

Watch out Robbie!

@joshshine2489 4 ай бұрын

Blow and tack I can do....don't have the static gun

@davemurphy4056 4 ай бұрын

I bet the hot sun will shrink the material

@sandbox_adventures 4 ай бұрын

You should call the paint booth AREA 51. 👽🛸

@gonzalez7805 4 ай бұрын

Nice

@riverfrontww 4 ай бұрын

DON'T FORGET TO CUP THE BALLS

@TimothyDalton-rk1ve 4 ай бұрын

The Chinese were making fun of us dude😂

@leelynndean4153 4 ай бұрын

Matt id say the old padding and frame probably a little wore out might go get some foam padding and add it to to center and the sides idk if that's the problem or not but it's a thought

@TripleXclown 4 ай бұрын

You’re going to have to get him another Vehicle book 😂

@clipper1083 4 ай бұрын

Where was the "The blow tac and static"? Jokes aside you both did a great job👍

@jeff750r 4 ай бұрын

Breaking Bad comment will get you more "Jeep" parts!....LOL

@middleway1885 4 ай бұрын

Portable greenhouse in a box... lol

@raysiebert6758 4 ай бұрын

Don't forget to blow, tack, and static, 😂 Robie Layton's got nothing on you guys 🤔😁😂

@wayneullman5079 4 ай бұрын

I’m surprised you didn’t make a temporary frame for support when it deflates. Make them in sections for storage etc.

@bleepinjeep 4 ай бұрын

PVC, might have to work on that to hold the lighting for the next paint job.

@TripleXclown 4 ай бұрын

Might be foam Shrinkage.. try removing it and using a steamer to revitalize the foam, and then Apply a layer of Dacron with Spray adhesive before applying the new cover.

@bleepinjeep 4 ай бұрын

It was the wrong dimensions, they ended up fixing it for me.

@user-zl2uo8yb2p 3 ай бұрын

U shood fill up the pillers with fome and put it out side 😊

@carlt8188 4 ай бұрын

Josh may forget who he is, but I bet he'd never destroy an Orivs Edition Grand Cherokee ZJ in great condition by rolling it down a steep hill with a diesel tow strap tied around the engine.

@bleepinjeep 4 ай бұрын

Oh we would for sure. Have you seen his grand Cherokee?