Upgrading Throttle Linkage on 67-72 F100

Рет қаралды 872

Күн бұрын

The stock throttle linkage on my 1968 F100 is binding and causing issues wit the throttle. I need to replace it with something that will work all the time and not bind up.
Universal Throttle Linkage - krusebuilt.com/products/throt...
Shot with GoPro Hero 12 with the Media Mod, edited on Davinci Resolve 18.
Gear I use:
GoPro Hero 12 Black - amzn.to/48oeFw3
GoPro Hero 9 Black - amzn.to/3ZCTpP7
Media Mod for GoPro Hero 9 thru 12 - amzn.to/3CPKOi2
Rode Wireless Go II mic kit - amzn.to/3iJrj4c
GoPro Hero 8 Black - amzn.to/3QLpj7V
Media Mod for GoPro Hero 8 - amzn.to/3ZCAeoA
GoPro Hero 5 Black - amzn.to/3XuKMUQ
GoPro Karma Gimbal for Hero 5 - amzn.to/3GIWa8P
Want to help support this channel, you can "buy me a coffee", check it out! www.buymeacoffee.com/krusebuilt
Credit for the music in the video:
::::::::::::::::::::
Epidemic Sound
Try it today! www.epidemicsound.com/referra...
::::::::::::::::::::
#krusebuilt
#kruseview
#bumpside
#fordf100
#f100

Пікірлер: 22

@tommontague5721 18 күн бұрын

Nice clean installation. Good to see you to put a throttle safety spring inside the main return spring. Just encase the main spring breaks......Good video

@AndyKruseChannel 18 күн бұрын

Thanks! :)

@vaughnstevens8396 14 күн бұрын

Looks better then that other messy linkage

@AndyKruseChannel 14 күн бұрын

Agreed. :)

@brianvaughn9299 18 күн бұрын

The return spring in that position will cause wear on the butterfly rod. Causes a bind and uneven throtle apply as well as a vac leak.

@AndyKruseChannel 18 күн бұрын

Thanks for the heads up. :)

@flipflopsgarage 18 күн бұрын

I was told it was setup that way for two reasons. 1st it increases the pedal ratio so your pedal will be closer to the floor and not have to move so much. 2nd With a straight linkage as the engine torques up in the mounts it will increase the throttle input.

@AndyKruseChannel 18 күн бұрын

I can follow the logic on the first one, that makes sense. It still doesn't do me any good as the linkage on my truck was damaged and need to be replaced. This was a cheap option. :) But for the second one, doesn't the engine pitch or roll sideways (or about the axis of the driveline) and so the distance from the throttle pedal lever to the throttle linkage on the side of the carb doesn't change enough to cause a throttling issue?

@flipflopsgarage 18 күн бұрын

@@AndyKruseChannel I use a modified linkage I got from your store and I can see the tps readout change a few percent from moving the engine side to side. Not enough to notice it driving but maybe a different engine would have a different result. I’m sure they had some reason for all that mess right?

@AndyKruseChannel 18 күн бұрын

@@flipflopsgarage I'm sure there were several reasons for that old linkage style. But in the end, the cost to replace it to what it was with new parts was more than putting on this linkage. Sometimes the budget wins. :)

@flipflopsgarage 18 күн бұрын

@@AndyKruseChannel I got rid of mine for safety issues. I couldn’t find usable parts and mine liked to bind up a wot. That’s only fun once.