DIY video on a E46 M3 getting the the standard 120 kit installed.
Пікірлер: 67
@santillanbryan31472 жыл бұрын
best tutorial ive seen yet
@fantasticleese2 жыл бұрын
Thank you, very detailed.
@russelltaylor3282 Жыл бұрын
Of all the installs I’ve reviewed, yours, got me, is the most substantive I’ve seen. A question: Have you seen or found exact same angel eyes that allow color change via a remote and are LED?
JDM toy RGB switchback angel eyes. Had them on my e 46 but ended going back to plain white. Check out BMW Selena Angel Eyes install. Different electrical hook ups but same end result.
@DFC3009 ай бұрын
Thanks!!
@rondjeee Жыл бұрын
Thanks, on the e46 m43 318ci its a green cable right? In that fuse box you show, When starting the car they turn on
@danielpenberthy5126 Жыл бұрын
Clean write up thank you. Do you sell the kits aswell?
@angeleyeguy7941 Жыл бұрын
Yes. Angeleyeguy.com
@xFrenchFrog6 ай бұрын
Is there a way to connect the angel eyes to the original daytime running lights connectors instead of connecting it to the ECU ignition wire?
@melihhabi2 жыл бұрын
do i need to connect the cable to ecu? does it work when i just start the engine?
@Zalle3352 жыл бұрын
Does your E92 angel eyes work on the E90 lci?
@maxx1nsane2 жыл бұрын
I would suggest getting that pos wire wrapped in something to protect it from rubbing against the chassis and short out. Even cut a slit in that rubber and get the cable through it.
@Ni-rj1oq2 жыл бұрын
mine shorted out😢
@LukasGracaa2 жыл бұрын
what abt the other angel eye? where do i connect it? the ECU and the footwell just like the other one?
@willbishop32835 ай бұрын
Hey, when installing these on my 2000 323ci, a strange whine appeared near my master brake cyclinder, makes noise constantly and had to unplug the battery, any suggestions?
@animo_motions11 ай бұрын
I don’t have that red-Wight yellow cable for the red wire, inname a 316i sedan, are there other options ?
@crazzy88ss2 жыл бұрын
Do you have to tap both the ECU cable, AND the footwell light cable? Or can you pick which one is best for your setup?
@angeleyeguy79412 жыл бұрын
Ecu tap is for the ignition source. If you don’t connect it, the Angel eyes won’t come on when ignition is on. The footwell light tap is so the Angel eyes come on when you unlock the car.
@carlosaponte3877 Жыл бұрын
I ordered a set recently and would like to clarify; Do you HAVE to tap both wires or can it be one or the other?
@crazzy88ss Жыл бұрын
@@carlosaponte3877 You do not. I left the footwell light untapped. My halos come on only when the ignition is on.
@ramenboy68449 ай бұрын
@@crazzy88ssmaybe a dumb question but what did you do w the wire? Just have it hanging around?
@Jwips.8 ай бұрын
@@crazzy88ssdid you tap into the ecu ?
@TajwarC2 жыл бұрын
Hi, do you ship to the UK?
@TheIrek666 Жыл бұрын
Save yourself some trouble and don't mess with your ECU box. Plug the red wire into empty fuse slot (e.g fuse 13 for sedan E46 is perfect), since you will be working in your footwell area anyways
@sietsederidder1480 Жыл бұрын
Thanks
@petancs1944 ай бұрын
hello, might i ask how this could hurt the car? is it mot safe to connect angel eyes this way? thanks for amswer
@TheIrek6664 ай бұрын
@@petancs194 if you're not careful and snip one of the ECU cables it may be problematic to fix. Tapping into an empty fuse slot is way safer
@petancs1944 ай бұрын
@@TheIrek666 do u perhaps know if the angel eyes will work just fine if i do that? whats difference between that and ECU? i suppose it will work only when i set lights on in csr manualy right?
@TheIrek6664 ай бұрын
@@petancs194 in both cases they will turn on with the key in ignition
@emilioalvarado8112 жыл бұрын
did you need to splice anything? or did everything come assembled
@YrCrepsAreWeak2 жыл бұрын
Everything comes plug and play, minus the wires you need to tap yourself but wire taps come in the kit
@andrewwigley745 Жыл бұрын
I have headlights that use H7 bulbs but also has projectors. Which one do I get? The halogen or the xenon Angel eyes?
@andrewwigley745 Жыл бұрын
@angel eye guy
@icyw0lf9372 жыл бұрын
Instead of the ignition wire can we connect to an after market switch or button so that we can turn the light on and off while driving ?
@angeleyeguy79412 жыл бұрын
Yes you can.
@icyw0lf9372 жыл бұрын
@@angeleyeguy7941 can you let me know in detail on how to do that ?? That would be a huge help and i guess lots of people wanna know too
@angeleyeguy79412 жыл бұрын
@@icyw0lf937 I don’t have a diy written up to do that. You would just add a basic on/off switch going from the ecu to the switch. Then back to Angel eye harness
@icyw0lf9372 жыл бұрын
@@angeleyeguy7941 how to identify the wire in ecu mine looks different from yours?
@ludomeuh32 жыл бұрын
Where does it buy this kit?
@ONI37 Жыл бұрын
Do the t taps usually come with the angel eyes?
@angeleyeguy7941 Жыл бұрын
Yes it does
@fatihcakirfc2 жыл бұрын
Hi, can i use this kit on my e92 year 2007 with xenon and change the wire connections? thanks a lot .
@angeleyeguy79412 жыл бұрын
For a pre lci e92 you can purchase this kit angel-eye-guy.myshopify.com/products/e9x-m3-e92-pre-lci-angel-eye-plug-play-kit
@SS-bf9re Жыл бұрын
I did it and only when the interior light are on the angle eyes work not if iam driving
@farukbasoda5127 Жыл бұрын
Aynisindan siparis vermek istiyorum xenon icin nerden?
@asdasdasd69672 жыл бұрын
Do i have to put cable to ecu? What does that wire do?
@angeleyeguy79412 жыл бұрын
The wire that taps to the ecu is for the ignition source. If you don’t connect it, the Angel eyes won’t come on when ignition is on
@asdasdasd69672 жыл бұрын
@@angeleyeguy7941 I tapped the cable to the ecu and it gets power but it wont turn on the relay so the angel eyes dont have a power source, you think its the relay that is broken? When I put the cable thats going to the interior on + its lights the angel eyes on... I dont know what the problem is
@angeleyeguy79412 жыл бұрын
@@asdasdasd6967 please send me an email joey@angeleyeguy.com
@johncofrancesco5262 жыл бұрын
I have the switch method, how do I use that?
@angeleyeguy79412 жыл бұрын
You can use the video diy for 80% of the install. Use this diy for the rest cdn.shopify.com/s/files/1/1953/3475/files/Angel_Eye_Guy_DIY_for_White_amber.pdf?6281104859294682878
@johnathanlee53315 ай бұрын
Is your shop still up and running
@RyanHnZ5 ай бұрын
I placed an order 3 days ago so I hope
@johnathanlee53315 ай бұрын
@@RyanHnZwhen does it come in and do u have it already?
@goranlovrinovic6713 Жыл бұрын
What are the sizes of the rings
@gavinsmartt69965 ай бұрын
Jesus christ lads. Don't ever use those shit connectors on your car,you will burn it down. Go straight to your fuse box for powers and always use a fit for purpose relay. 90% of what you see guys doing on yt will fuck up your motor. To think that this guy is using cheep Chinese crappy wiring with a salute shit connectors on a m3?????common lads.is it really that difficult to do it right?
@K1scarcrazy2 жыл бұрын
I’m really stuck with this, it’s very complicated for me