Just cleaned my Laptop Yesterday for the first time in 3 Years. Just because GPU and CPU was quite getting hot. Now it's 20 Degrees cooler :) Thanks for the awesome video helped me a lot!

Thank you the video! The "Acer Aero" fan was making noise. Pulled both fans out, cleaned. The Aero fan continued to make a bit bit of noise. One very small drop of light weight oil from the garage (not sure what exactly weight, etc.) in the hole and the fan no longer makes noise. Appreciated!

After cleaning the fan from dust, you should have lubricated the hole where the fan is placed. This will remove that noise.

The fan on my Triton Predator 300 has always annoyed me, but last night it started to sound way worse, like a piece of plastic was also fluttering around inside; after watching this vid, I can understand the dust is likely responsible, and I'm going to follow your steps - thank you!!

Thanks, my man! This was driving me nuts. Subscribed :)

I can see the changes thanks for this. I'm gonna buy this soon cuz it is very easy to clean.

Yo brother, excellent video. my laptop was vibrating and noisy. Gave the fan blades a nice clean. its sleeping like a baby now.

Thank you. I broke the outer ring on the fan blades and did not know how to replace it.

Worked for me but the lubricant are very necessary to work, proved on acer predator triton 500, thank you man

Thanks for the help, although I didn't see the comments during the process so still a bit of noise because I did not use a lubricant, welp .. gotta put in some later !! but for now its fine 👍

thanks for showing detailed steps how to do it

You can use DW40 to lubricate fan motor but make sure just put enough not excess. I already use in my laptop and nothing wrong with DW40. 👍

Thank you, very useful!

boss salamat malaking tulong to, muntik na ko mapabili ng gpu fan .. salamat talaga

instead of putting the fan back dry you should use some sewing machine oil in the center of the fan where it makes friction

Thank you. I followed your video. and cleaned my fans. temp from 65 idle. now its 45. and last time gaming(valorant) i have fan on max but the temp is 91. but now fan on auto. but its 70. thank you sir.

thank you, even though my computer and yours are different

Bro I have the same issue, that noise makes me crazy, now at least I know what causes it and the Fans are not damaged or whatsoever

I have ph315-53. The one with rtx 2060. My gpu fan sounds completely normal when it’s idle. But once i increase the speed to around 5000 rpm, it sounds exactly like yours. I opened the lid and tried turning it by hand, it turns smoothly without any noise. I even blew the air in the vents to turn it fast…no noise and looks smooth. I noticed this after 1.5 years of use.

Bro one question. Is it possible to swap out the fan blades? Please reply thank you. Awesome vid BTW you got a Sub

Read about putting small amount of oil in the comments, I'll try to do that.

Mine sounds like a tricycle (you can google it up for reference). The plastic fan spins with ease. The metal fan does not. I cleaned it up but its still the same. Turns out that the blade kinda hits the housing for the fan. Loosened it up a bit and it reduced the noise. I am just worried maybe it can cause any damage to the fan. Can anybody suggest the best course of action for this?

I went to pop my right (CPU) fan back in and apparently I broke the little peg off that keeps it balanced. I noticed it was more resistance than what I thought it would be, so I thought that was strange so I pried the fan with a screwdriver and that snapped the little peg. So if you're getting resistance, don't force it! Just get a can of air or use a compressor if available! I did find a replacement on Amazon for 18 bucks shipped, but now I have to wait four days to use my computer.

bruh its working, im using grease for bicycle and but work smoothly! thanks 😃

Are your fans working fine currently ??

Had same issue on my helios 500 cleaning didn't worked and i bought a new one for 90! Now it's silent again.

I found a stupid temporary solution, I had the same problem then I cleaned it greased it with white lithium grease.This cured it for about 3 days then it came back the fan was spotless so I re greased it and it was OK for 2 day's,I took it apart again and it was again spotless so I re greased it again and after I got done playing games and really using it I flipped it upside down for the night inside its bag and kept it flat ,again I know it's stupid but so far it's been a week and it's still working,they installed the fans upside down they fall over time.i bought 2 more fans just incase but so far this has worked.

Hi can you make a video of lubricating the fan, please.. need it urgently

Claening didnt fixed my fan , will now try lubricating.

7:52 but its still bad? wtf

Thank you. This was very useful. But when I tried it myself. The plastic fan wasn’t wanting to come out. Is this normal. I tried not to put too much pressure on it

My guess is youre from the philippines, can you tell me where you bought the lubricant you used? My fans is so noisy its actually scary lmao

Hey I was just wondering how did you manage to open the right fan. I tried it was taking too much force and the blades were getting squished as I gripped on them? Any idea how to get it out effectively as even after a deep clean my fan still rattles

i kept my fans at max speed for more than a year... i didn't know that it could damage the fans and now they were dirty and sounding like yours(only gpu one tho) i cleaned them a little bit although i wasn't able to remove them at all like you. would putting lubricant help them? and are they gonna stop working because i let them run at max speed for over a year? i'm sad cause i think there's no way i can get a good replacement for the gpu one...

My gpu fan started to making sounds and I immediately followed your tutorial. But after cleaning, it didn't seem to remove the ticking sound as it rotates. When I disassembled the fan and manually tried to rotate it, it works but it makes a sound whenever a rotation is done. I checked each blades of the GPU fan but did not see anything wrong. At this point, I have no idea what to do. I feel like I shouldn't buy a new GPU fan since its current rpm is around 6100+ at max.

is it ok to just not touch it and leave it at that or will it eventually break?

Hello, Do you have any idea on how to disassemble the fan from acer predator 15. The aeroblade fan. It doesnt have any screws to remove

For lubricant is it just the post that goes into the hole with the magnets or is it on the outer kinda ring thingy?

tried this It seems to be worse: des the screws have to be reallly tight or just enough? also one of the round things that hold inbetween the case and the rest of the computer broke in pieces, i placed it back well enough but idk if it could make it worse.. also how do you disconnect the fan frm the board.. do you have to pinch it or just pull it??

I did all these and it's still making annoying noises. :(

I am having the same issue, loud af

You think WD40 can get the job done as well?

Bro I gave the laptop to local store to help me out with this sound and thermal pasting,next day same sound but, much worse.

What lubricant can be used for the fans? I starting to have the buzzing noise from one of my fans and I need some help. I also need help knowing how to remove the fans from the magnetic bearings

Is it ok to clean the metal fan with water? Is it not going to rust?

hey i opened every screw at te back side but when i tried pulling the back cover out it didnt came out and now i am stuck at opening screws. help please

Hello ask if you change ur extra hdd to ssd?

Stills nice after all this time?

My cpu fan don't seem to be using a magnet to hold the fan blade. I keep trying to pull and pushing from the back but it seems like there is some resistance. Is my cpu fan not using a magnet in this case?

It sounds like a 10 year old blender for sure.

Please, link a video of the fan lubrication. Thanks

hey my gpu fan stopped working, any tips for this issue?

it's specific to the GPU fan because THEY DONT LUBRICATE IT

can i just brush the dust off with a brush

planned obsolescence

sir

hello may recommended store or shops po ba kayo to buy GPU Fan ng predator? Tia

It didnt work for me. Such a waste of time

Where are you supposed put the lubricants, sir? i mean which part of the fan?

What were you thinking using water to clean the fan. That is stupid among so many levels as your likely to make the problem worst. EVER HEAR OF RUST! Never ever ever use water on your laptop fan. Especially on expensive aeroblade fan that has metal blades. Its not your desktop plastic fan. If you were going to do water, you should at least check for erosion protection which is unlikely for this product. The next problem is that there is no way you were able to prevent this for 89 blades. Your going to have rust without doubt.