How to Install an Oil Catch Can PCV System 3.5L V6 (Nissan 350Z/ Infiniti G35)

How to Install an Oil Catch Can PCV System 3.5L V6 (Nissan 350Z/ Infiniti G35) | AnthonyJ350

Рет қаралды 73,887

8 жыл бұрын

Why do you need an oil catch can? In this video I go over installing a vehicle specific oil catch can in line of the positive crankcase ventilation system (PCV) install in my 2006 Nissan 350Z. This is one of the more important support mods to me because I believe it helps keep the intake manifold clean and give you a better air and fuel mixture.
www.saikoumichi.com/s1_350z_oc...
#Nissan #350Z #OilCatchCan #OCC
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
Music available - www.jinglepunks.com & www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
How to Install an Oil Catch Can PCV System (Nissan 350Z/ Infiniti G35) | AnthonyJ350
• How to Install an Oil ...
ANTHONYJ350
/ anthonyj350

Пікірлер: 194

@jrzhoe24 6 жыл бұрын

These videos are super simple and simple much appreciated

@AnthonyJ350 6 жыл бұрын

jaysab24 Glad they're helping you :)

@mrgold88 8 жыл бұрын

I've ordered this catch can after seeing your video like a month ago and finally it got shipped today, I've ordered it with all the accessories. Can't wait to get my hands on it and install it myself! Btw thanks for the videos, I find them very useful!

@mrgold88 8 жыл бұрын

It took them this long because they were out of stock and they had to fabricate some new ones!

@AnthonyJ350 8 жыл бұрын

Glad they help you! Yes this is an awesome product! Make sure to share any content you like, it helps a lot!

@mrgold88 8 жыл бұрын

+AnthonyJ350 will do!

@lowm3 6 жыл бұрын

Update?

@350zprojects8 5 жыл бұрын

Where you guys buy it?

@BESIMXCARS 8 жыл бұрын

Another issues some cars have is under high G forces in a corner the oil can slosh to the side and be more susceptible to being sucked into the PCV system and burning the oil there. 300ZX's are well known for this, my 300ZX did it pretty bad as well. Great video by the way!

@AnthonyJ350 8 жыл бұрын

I can definitely see that being an issue if you let it get too full. I would just drain it before any spirited driving session and on a baffled version like this, you really shouldn't have any issues.

@400Redsport 7 жыл бұрын

I don't think you understood what he was saying, he isn't talking about the catch can but the engine itself. During hard corners, the pcv system sucks up oil that get's pulled to one side of the engine so it sucks more oil up into the can. Which I can say is pretty spot on, mine does that a good bit.

@michaelenochs4033 4 жыл бұрын

Hey man, this was a great video. I think I'm going to get one because I'm going to replace the valve covers on my G and since I'll have it all apart, I think I'll add this to it while I'm at it. Nice video

@AnthonyJ350 4 жыл бұрын

Thanks for watching, this support mod is definitely worth it.

@g35tho11 3 жыл бұрын

Did you get one ?

@michaelenochs4033 3 жыл бұрын

@@g35tho11 I did, yes! It definitely works as advertised. I went with the ADDW1 Oil Catch Can. Just be advised if you're in California, this will not pass on smog hooked up. You'll have to disconnect it and put the hose lines back the way they were and remove the catch can before testing.

@brayangomez1784 6 жыл бұрын

I like your z super clean

@AnthonyJ350 6 жыл бұрын

Inkids Yo Thank you!

@TrishZenCorner 4 жыл бұрын

Thank you for the info!!

@AnthonyJ350 4 жыл бұрын

Glad you liked it!

@justanls 6 жыл бұрын

I ran the same catch can for a long time but recently switched to a custom vented one for my boosted setup. I miss how well the SM catch can blended in with everything under the hood.

@AnthonyJ350 6 жыл бұрын

justanls Curious why you went vented? This guy did a good video showing the sealed still works really well kzfaq.info/get/bejne/fruBodtllcrIiGw.html

@mckinneytexaszeds5922 7 жыл бұрын

Ahh I remember seeing this vid a few weeks ago LOL... Yea I will have to consider it! I've got to modify a stamp to put on it though. Gotta represent the AJ350 and/or GFHV

@AnthonyJ350 7 жыл бұрын

Don't worry, mailing the stickers out tomorrow :)

@mckinneytexaszeds5922 7 жыл бұрын

Cool

@chiknhawk90701 6 жыл бұрын

another great vid Anthony. Can you do a video showing how to do a Big 3 Upgrade? I have couple of amps powering all my speakers and this is next step I would like to take to make sure sound system properly. Thanks in advance.

@AnthonyJ350 6 жыл бұрын

chiknhawk90701 I did this video years ago kzfaq.info/get/bejne/d7l9qtigy9CdeGg.html

@AnthonyJ350 6 жыл бұрын

chiknhawk90701 And this is what I did to my car kzfaq.info/get/bejne/o9GHdtSEy9iamZs.html

@DENicholsAutoBravado 7 жыл бұрын

Sorry, I don't have time for the full video right now, but from the few minutes I've seen, I want to say, that I agree only needing the oil catch can to work on the PCV side. The other side of the engine is meant to draw air while the PCV vents for both sides of a V engine. I've seen lots of diagrams that match my comment, and unless engineers simply are wrong about the physics, you're doing what makes sense for the design.

@AnthonyJ350 7 жыл бұрын

DE Nichols Ya we didn't want to alter what the engineers had already set up. I really don't like it when people attach both sides to one can with a vent.

@DENicholsAutoBravado 7 жыл бұрын

AnthonyJ350 Exactly. I know it would interrupt with the correct flow through the system. At worst it'd make the catch can ineffective and at best hooking up to both sides would make the system less effective. The side without the PCV is meant to bring fresh air in. When the engine has higher pressure, then the PCV lets gases and a little oil escape. The pressure is always going up and down. A catch can is supposed to just catch unwanted oil on the way back to the intake when the pressure is high. If it's hooked up to both ends it's mixing the intake and "exhaust" if you will.

@CarGuy87 7 жыл бұрын

Thanks for the information. But don't you think that if the side with no PCV lets air in, wouldn't it make sense to put a breather filter on that side only? (since there is no pcv and its purpose is to simply let air in). I totally agree with you on the PCV side. The oil catch can is needed there. Let me know your thoughts. Following this factory system, it seems that most oil catch can kits for the VQ are not designed correctly then. If someone could clarify on why pcv is on one side and not the other would be great. Thanks guys.

@trenthick2010 5 жыл бұрын

If you put your rubber hose in hot water it will make it easier to slide fittings in.

@AnthonyJ350 4 жыл бұрын

Thanks for the tip!

@geeaye64 7 жыл бұрын

That's the same catch can I was looking at to purchase.

@AnthonyJ350 7 жыл бұрын

Saikou Michi? It fits really good. I have a video for it. kzfaq.info/get/bejne/n7mqiJCU29Kwf2w.html

@jewllake 6 жыл бұрын

I thought you did a video of installing one of these in your Silverado? Anyway I never installed one on my 06 Sierra or 06 GMC Yukon. I did install an Elite EX2 catch can on my 2018 6.2 Sierra since that one is direct injection.

@AnthonyJ350 6 жыл бұрын

jewllake I did a benefits video showing what it catches. The newer direct injection GM trucks for sure it needs this. The older trucks I think it can benefit as well.

@BradleyGrohs 6 жыл бұрын

How would one drain the catch can back into the oil pan without defeating the PCV valve? The gasses in the oil pan and the valve cover are the same. There linked by drain holes through the block and head. The PCV valve function is not to ventilate the engine so you don't suck blow-by at the wrong time.

@AnthonyJ350 2 жыл бұрын

Thanks for the comment!

@richardknight304 6 жыл бұрын

I installed a Mishimoto catch can between the PCV valve and intake. Drove the car around for about an hour and every time I came to a stop and idled huge clouds of white oil smoke billowed from the exhaust. Got home and drained 8 oz of oil from the can. Switched to an open system with a K&N filter on top of the can and no more smoke. Why was that happening?

@AnthonyJ350 6 жыл бұрын

Richard Knight What happens when you go back to stock for the PCV (no can at all)? The can sealed should not do that. I have a write up why PCV is important to avoid ring flutter.

@Z33Garage 8 жыл бұрын

I know you did not show it, but the strut bar is under load, if you don't back out the strut tower nut on top, you will strip the threads on the strut tower bolts. Lol ask me how I know. You also beat me to this install. My catch can is coming this week.

@Z33Garage 8 жыл бұрын

The drivers side usually can get oil under WOT per the fsm. So a good thing to do is to check the inside of the Z tube and throttle body for oil. You can run 2 cans, one on each side and keep the system closed, or run 1 can with both venting to atmosphere, but you need to close the inlet on the intake as well as drill out the PCV valve on the drivers side, otherwise the engine will stall. Na Zs usually don't need both sides, the main issue is always with the drivers side as you point out.

@joshboss3690 8 жыл бұрын

+Z33 Garage I watch your installs man. You should have way more subscribers by the quality of your videos, anyways will you be installing a catch can like this or like the one you mentioned that has a breather?

@Z33Garage 8 жыл бұрын

+josh boss thanks man! the catch can I will be installing will be for a single bank, no breather. Just like in this video, except I will also install a smaller can on the drivers side, for the hell of it since it's sitting in my toolbox.

@AnthonyJ350 8 жыл бұрын

Ya from what I've researched that vent leading to the intake tube only comes into play at WOT like you mention, so it's not as big of an issue as the other side. Plus I'm not sure how many people are going to be into plumbing that much more work.

@zeronorhero9800 8 жыл бұрын

I just did the passenger side, and it makes a hellluva difference. about an ounce in 1 month a few hundred miles.

@mikebonez2one6 6 жыл бұрын

Did you order the OCC (350z VQ35DE) for your specific Z? I dont see an option for just a basic model 350z. (2006) Also, is the one you got a drop-in system where everything comes provided? Or will i have to order the hoses, clamps, ect ect. along w/ it? Thanks anthony! Again, you have helped me through the process of upgrading components in my 350z.👍

@AnthonyJ350 6 жыл бұрын

Mike Bonez If you check out Saikou Michi you can order the can specific for the 350Z and everything is provided. There's also options you can add.

@salalas7451 8 жыл бұрын

this is very informational but I don't know if I should sense I own a diesel not a gas

@mannys9130 8 жыл бұрын

A diesel will benefit from a catch can too. The catch can exhaust hose will either go to the preturbo intake (for a turbocharged diesel) or to the intake manifold (for NA).

@AnthonyJ350 2 жыл бұрын

I would look into it.

@zeronorhero9800 8 жыл бұрын

Have you done any work on the endlinks? like a replacement video?

@AnthonyJ350 8 жыл бұрын

Not yet. I'm still decided what product to go with. Most likely the Moog pieces cause they look thicker than factory and have grease fittings. I don't like the exposed product like the Whiteline only because I don't think it's suitable for a vehicle that drives in the rain and daily applications like mine does.

@socalecos550 5 жыл бұрын

Anthony...what kind of brand do you recommend for an oil catch can for an 06 get coupe 6mt? Also do you think the catch cans with the filter on top work?..will it give me idile problems?..it gave me!

@AnthonyJ350 5 жыл бұрын

I recommend the one I used in the video. Saikou Michi.

@socalecos550 5 жыл бұрын

@@AnthonyJ350 where did you buy it from?

@XenomorphLV426 7 жыл бұрын

Where do you recommend getting the hoses?

@AnthonyJ350 7 жыл бұрын

Local auto parts store. Make sure it's rated for oil and fuel.

@michaelzosa2759 6 жыл бұрын

Could you link to where you got this? I can’t seem to find it

@AnthonyJ350 6 жыл бұрын

www.saikoumichi.com/

@ThrowyaXup Жыл бұрын

Is running a closed catch can better for your VQ as opposed to an open/filtered one?

@AnthonyJ350 Жыл бұрын

In my opinion it is. The PCV system can work as intended, the only difference is you're separating the oil.

@joselajara9333 7 жыл бұрын

Hi! Can you show it for a 2014 Infiniti Q-50? Please if so let me know

@AnthonyJ350 2 жыл бұрын

Sorry don't have the video.

@JUNEORJUNE 6 жыл бұрын

WILL THIS OIL CATCH CAN WORK FOR MY HR 350Z?

@AnthonyJ350 6 жыл бұрын

JUNEORJUNE I believe it does. Email Mr. Saikou (tell him I sent you) and he can verify.

@TrishZenCorner 4 жыл бұрын

How do you keep you engin bay so clean?!

@AnthonyJ350 4 жыл бұрын

Car is only driven in summer, I run a closed oil catch can system so I don't get oil vapours all over the engine.

@irovericedude16 5 жыл бұрын

Anyone know what hose size is needed for the catch can?

@AnthonyJ350 2 жыл бұрын

Kit should come with the hoses you need.

@waltermull9598 4 жыл бұрын

Could this be use on a pvc delete system ?

@AnthonyJ350 4 жыл бұрын

I suppose you could, but you need vacuum of some sort to pull harmful elements out of the crankcase. I have a detailed video here explaining it kzfaq.info/get/bejne/geCfZr2dtbHdqKs.html

@tonyhenderson1108 7 жыл бұрын

What was the price for the system you installed?

@AnthonyJ350 4 жыл бұрын

I can't remember, it was a couple hundred bucks. Worth it for how well it's engineered.

@pistolgripjoe 6 жыл бұрын

how high up does it sit ?

@AnthonyJ350 6 жыл бұрын

PISTOLGRIPJOE Not sure, why do you ask?

@marklengal9990 4 жыл бұрын

Do you have a video for a 2005 G35? It’s extremely tight

@AnthonyJ350 4 жыл бұрын

Sorry no, this is the only video I have for these cars. What's going on?

@g35tho11 3 жыл бұрын

Did you install on g ?

@BrawlFreak786 4 жыл бұрын

does it help with the oil consumption?

@AnthonyJ350 4 жыл бұрын

Definitely will slow it down.

@Mohdr121 3 жыл бұрын

are you still running the same catch can? how has it held up.

@AnthonyJ350 3 жыл бұрын

Yup, car still has it. It's been great, zero issues. I recommend it.

@barvajz1106 6 жыл бұрын

hello anthony its me again:D you cant leave alone the right side... second one for intake tube is important too... 3:03 yes you must link it together ..:D

@AnthonyJ350 6 жыл бұрын

I plan to put one on the intake tube once Saikou Michi finishes their development. I plan to run it closed loop and separate, same as factory but with the catch can inline.

@Gohan_Fanboi 6 жыл бұрын

Silly question but since you say this catch can is specific to your vehicle, it's main purpose is for Z's rather than the G's?

@AnthonyJ350 6 жыл бұрын

Revolt Larz Wolfblade It should fit both cars since they're the same platform. Double check with the mnufacturer

@DiaperSNiFFER 6 жыл бұрын

Revolt Larz Wolfblade it will fit for my 04 g35 sedan it works trust me

@srv2low4me 3 жыл бұрын

Great video. Im in the middle of installing the ADD W1 OCC on my G35 and things are tight because of my DRL module (go canada!) It looks like the catch can is touching the PS reservoir a little, any issues with rubbing at all? Same for the hose side, it looks really close, any issues with rubbing?

@AnthonyJ350 3 жыл бұрын

Nope, no issues on my end.

@srv2low4me 3 жыл бұрын

@@AnthonyJ350 Awesome. I didn't think the can touching the reservoir would be a big deal, but thought I'd ask someone with experience.

@AnthonyJ350 3 жыл бұрын

@@srv2low4me Let us know how it works out after.

@srv2low4me 3 жыл бұрын

@@AnthonyJ350 For sure! You earned a subscriber

@AnthonyJ350 3 жыл бұрын

@@srv2low4me Thank you! Every single one counts!

@jbaeza915 7 жыл бұрын

So this kit works with the Kinetix Racing Velocity intake?? And do u think it would fit if i have a weapon R Coolant Overflow Tank?? Please need some help! My 350z has been having oil consumption issues

@AnthonyJ350 7 жыл бұрын

Does the Velocity intake have the PCV vacuum hose attached?

@AnthonyJ350 7 жыл бұрын

Also how long do you let the motor warm up before you drive (at least 30 seconds to a minute)?

@jbaeza915 7 жыл бұрын

Yea on avg about 30secs. Why?

@jbaeza915 7 жыл бұрын

Yes it has a pcv hose attached as well! I took pictures if u want i could send em to u. Really need some help

@AnthonyJ350 7 жыл бұрын

Jordan Baeza I ask because I think not letting oil circulate and aggressive driving while the motor isn't at operating temperature also leads to oil consumption.

@limitlessautomedia9794 5 жыл бұрын

Did this stop any oil burning?

@AnthonyJ350 5 жыл бұрын

Consumption is relatively the same, but at least it's not going back in. I also recently installed an oil cooler to help reduce the oil from cooking.

@myg35rage23 6 жыл бұрын

how's your oil consumption?

@AnthonyJ350 6 жыл бұрын

It depends on how hard I drive the car.

@socalecos550 5 жыл бұрын

Anthony...I did the same setup as you...but when I turned on my car...it idiled up and down?...I installed a universal air filter catch can?...

@AnthonyJ350 5 жыл бұрын

Vacuum leak?

@socalecos550 5 жыл бұрын

@@AnthonyJ350 I really dont kno Anthony..I bought a universal one...came off a 350z as well....I did everything correct..but I installed mine in front of the engine bay..where u explained in the start of your video

@AnthonyJ350 5 жыл бұрын

@@socalecos550 Is the PCV valve ok? Did you put a new one in? Can you hear any air sucking from the can? Try putting just the vacuum line in and bypass the can, see if the problem goes away.

@socalecos550 5 жыл бұрын

@@AnthonyJ350 my friend and I tried to install it...yes at first there was alot of air coming out from the catch can...but we fixed that air problem ..yes my Pvc valve is ok...now I've seen videos where people install a hose from the back where the intake is at?...and they put a seal cap on the pvc line?..which is the correct way to install the hoses?

@socalecos550 5 жыл бұрын

@@AnthonyJ350 I looked at it...mine is fine..didnt think I need a new one

@rubictricks1853 3 жыл бұрын

What oil cap is that

@AnthonyJ350 3 жыл бұрын

Just one from ebay that says "Power by VQ35DE".

@jjwalker2011 4 жыл бұрын

Tony how's this working out for you??

@AnthonyJ350 4 жыл бұрын

Freaking awesome, I love this catch can for fitment and functionality

@mrdiaz2575 7 жыл бұрын

So you drop the oil that is inside the catch can away?

@AnthonyJ350 7 жыл бұрын

Ya I just put it in a container and bring it to a recycling facility.

@mrdiaz2575 7 жыл бұрын

How long it takes to get it full?

@vidarg75 8 жыл бұрын

Holy crap, that music around 11 minutes was loud! Can you please not make that volume a habit? Thanks.

@AnthonyJ350 2 жыл бұрын

Thanks for the feedback!

@tombryan1 5 жыл бұрын

Sorry, you are wrong with your definition of a PVC system. It is there to relieve pressure in the crankcase from piston movement, not the cylinders. It is supposed to simply open for Positive pressure and close for negative pressure, a 1 way valve either spring or gravity held. Usually gravity held in the closed position. In practice, very little oil should pass through but the Infinity G35 has a relatively poor design to vent gasses. It is also a closed design where as years ago it was simply allowed to spill out on the road through a drop tube vacuum induced by forward car movement..This should have been addressed by design engineers and mandated by the EPA for emission standards but I guess the combustion chambers and catalytic converters burn it and convert it.

@AnthonyJ350 5 жыл бұрын

Thanks for your feedback!

@AnthonyJ350 5 жыл бұрын

You might find this video interesting kzfaq.info/get/bejne/fruBodtllcrIiGw.html

@alldirty1370 7 жыл бұрын

Do you need a vented or non vented if your doing the PCV side only? I've heard if you do it wrong it'll idle all fucked up and it'll sound like a terrorist is getting water boarded at gitmo

@AnthonyJ350 7 жыл бұрын

All Dirty I did non-vented with internal baffles.

@austinbradley3411 3 жыл бұрын

So the outlet or the inlet on the catch can hooks to the pvc on the valve cover? Im just don't know where the hoses go.

@AnthonyJ350 3 жыл бұрын

Inlet from PVC outlet to manifold.

@austinbradley3411 3 жыл бұрын

Thanks

@AnthonyJ350 3 жыл бұрын

@@austinbradley3411 You're welcome

@austinbradley3411 3 жыл бұрын

Ok i put my catch can on inlet on the pvc and outlet on the manifold but my hoses go flat(pinch) Any reason for this

@AnthonyJ350 3 жыл бұрын

@@austinbradley3411 When you run the engine?

@g35tho11 3 жыл бұрын

Planning on ordering on of these for my 06 g35.. is this guy legit , no scam?kind of skeptical since payment is through PayPal. Would this catch can be better than a Mishimoto (I noticed there’s is baffled but also have a FILTER)?

@AnthonyJ350 3 жыл бұрын

I prefer purchasing anything through PAYPAL, because if there is an issue PAYPAL can step in and help you get a refund. This company is legit and makes a very high quality product. Baffled, no filter. Tell him you saw this video.

@g35tho11 3 жыл бұрын

@@AnthonyJ350 what would you suggest I get first the oil catch can or a short shifter ??

@AnthonyJ350 3 жыл бұрын

@@g35tho11 Torque Solution short shifter with a weight knob kzfaq.info/get/bejne/j5eTi8qisZjPiqM.html Followed by a new PCV valve and the oil catch can showed in the video.

@g35tho11 3 жыл бұрын

@@AnthonyJ350 can you let me know what exact steps you did to get your oil catch can , the guy said he will send me a request but I’m just skeptical because ive never had to pay for something this way . I don’t want it to be where I send him money and then bam just disappear and I have no trace of any purchase .

@AnthonyJ350 3 жыл бұрын

@@g35tho11 I got the request, sent the money then he shipped the product. Ask for a tracking number.

@tyebradford619 7 жыл бұрын

I usually just pour the catch can oil back in. lololololol

@AnthonyJ350 7 жыл бұрын

Tye Bradford Hmmmmm I wouldn't do that.

@JShayy 6 жыл бұрын

Otherwise it would be an oil garbage can. No these catch them so the oil can go back in.

@03056932 6 жыл бұрын

like he said this oil is contaminated with carbon and fuel so why would you possibly do that.

@nowimhigh 3 жыл бұрын

Definitely don't do this for anyone that's reading this! Seriously wtf man, why would anyone think this would be a great idea is beyond me? The oil it's catching is contaminated with all kinds of gases and vapors. This is the most assinine shit I've ever heard to do to your car. You have no clue wtf you're doing for one. This is why anyone who's considering getting a G35 or 350z need to buy one from an older person. Not some kid who riced the hell out of it and likely ran it to the ground. Doing dumb shit like putting oil residue from a catch can back into the engine ruining these cars.

@McGrathMotorsports 7 жыл бұрын

is it cooler to say zed instead of z lol

@AnthonyJ350 7 жыл бұрын

McGrath ??? I guess in Canada it is :p

@oliverjeffery320 8 жыл бұрын

Hello Iv got the 2006 350 and was wondering as you may be familiar they are know to suffer with oil problems as it is the rev up type would this help solve the problem ? Thank you for your time

@AnthonyJ350 8 жыл бұрын

I don't know if this will solve the problem. If the PCV is the culprit it will still consume oil but will store it in the catch can. I would just install a bigger oil pan like one from Stillen.

@oliverjeffery320 8 жыл бұрын

+AnthonyJ350 ok thank you for your help

@junkiemail78 5 жыл бұрын

Do you have a tutorial for installing a oil catch can for 2018 Infiniti Q50? I'm planning on getting Mishimoto MMBCC-UNI-BK (larger) or Mishimoto MMBCC-MSTWO-RD Compact Baffled Oil Catch Can, 2-Port, Red (smaller). Whichever would fit inside these tight Nissan / Infiniti engine bays. Don't know which hose is the PCV and the other end to the air manifold b/c I can't trace the line.

@AnthonyJ350 5 жыл бұрын

Unfortunately I don't have a video specifically for this vehicle. You would have to get a service manual to help your figure out the original plumbing.

@thatpoeticthug Жыл бұрын

What's the brand?

@AnthonyJ350 Жыл бұрын

It's a Saikou Michi www.saikoumichi.com/s1_350z_occ.html

@thatpoeticthug Жыл бұрын

Arigatou 🙏

@AnthonyJ350 Жыл бұрын

@@thatpoeticthug You're welcome

@socalecos550 5 жыл бұрын

No I didnt put a new one in

@AnthonyJ350 3 жыл бұрын

Thanks for letting us know.

@socalecos550 3 жыл бұрын

@@AnthonyJ350 lmao 2 years later! Hope all is well my friend

@AnthonyJ350 3 жыл бұрын

@@socalecos550 Sorry, I have a list of all the comments I didn't reply to, so I'm trying to catch up as much as I can. Everything is going well thank you! New job and new home shop being built to make better videos!

@socalecos550 3 жыл бұрын

@@AnthonyJ350 awesome my friend! Congratulations, keep up the good work!

@AnthonyJ350 3 жыл бұрын

@@socalecos550 Thank you! Hope work and has been OK during the pandemic for you and your family.

@narciso19G 6 жыл бұрын

Is it just me or is this guy way too delicate with things that don't need it?

@AnthonyJ350 4 жыл бұрын

Just you

@barvajz1106 6 жыл бұрын

nooo 11:20 nooo back to motor.. on catch can must be blow filter. and blind to the engine.. do the same on other side.. thats the right way... trust me the second hole on catch can is for blow filter , not back to the engine.. trust me

@AnthonyJ350 4 жыл бұрын

This is how Saikou Michi who designs and builds these wants them plumbed.