GAS STRUT INSTALL in Jon Boat To Bass Boat

Рет қаралды 83,438

5 жыл бұрын

Apexstone 10 lbs Gas Struts used:
amzn.to/2LHIC4i
Apexstone 22.5 lbs Gas Struts used:
amzn.to/2JjDwJt
What is up cuzins?! In this video I perform a FULL INSTALL on GAS STUTS in my #topgunjonboat . This mod is no doubt one of the easiest you can do in a DIY #jonboattobassboat conversion. It's simple, sexy, and functional.
I will do a product analysis of the struts I purchased from Amazon, show you the tools and methods utilized for the install. I install the strut on my livewell hatch but the same process can be used for any hatch in your casting deck on your jon boat build.
If you enjoy the content and would like to see more, please click the SUBSCRIBE button, it's the biggest way you can show your support.
Enjoy and may your tiny boat builds be great!

Пікірлер: 82

@micheleelliott4726 3 жыл бұрын

This is the best Strut install on KZfaq. The rest of the people gloss over the detail. Thanks, you have a gift for this.

@AnthonyJonesBrigadeBoats 2 жыл бұрын

Thanks so much, I appreciate the kind words!

@Goathead85 3 жыл бұрын

After watching numerous videos on the install. Finally got the information I was looking for!! 2.750 is the key I've been looking for!!!! Thanks Bro!!!!

@bluegrasstravelers8195 5 ай бұрын

You might even impress the ladies 😂 Love the videos and have helped me get ideas for my boat

@WaltonAquatic Жыл бұрын

I like the in depth commentary and going over all the details. Thanks for being thorough! I'm decking out my new 17' jon boat and your videos have helped me more than anything else. Keep doing what you do cousin

@AnthonyJonesBrigadeBoats Жыл бұрын

Thanks cuz, appreciate u

@twostepaasr 2 жыл бұрын

Finally decided to add struts to my Jon Boat hatches. Anthony's KZfaq installations are the best by far. This is especially true for those of us whose Jon Boat is a multi-year ongoing, I got to tinker with it, project. Thanks, Anthony I dread the day these videos would ever be gone.

@AnthonyJonesBrigadeBoats 2 жыл бұрын

Thanks so much man! I miss this good old days of tinkering slowly in the garage on the top gun jon boat! A lot has changed since then but I will continue to make builds and videos and have some good tutorials in the works! Thanks for the support!

@GanjaGuerillas 3 жыл бұрын

Thanks for the great details in your video that other just skipped over.

@AnthonyJonesBrigadeBoats 3 жыл бұрын

Thank you, glad you like!!

@zachmccarver 5 жыл бұрын

Just found your channel earlier today. I have now watched every video! Love it all! Got me inspired to do some stuff to my job boat! Keep up the great work! Thanks for the videos!

@AnthonyJonesBrigadeBoats 5 жыл бұрын

Awesome man! You might be the first one to binge watch my channel. Thanks

@smokedog6969 4 жыл бұрын

Anthony Jones no he’s not

@theodoresticole560 2 жыл бұрын

You’re so helpful. Thank you. You could charge good money for customizing fishing boats. Great work. Great advice.

@dorperdorper3396 2 жыл бұрын

Thank you! You have provided insight, detail, and practical considerations. My third try now will be successful. Really appreciate your videos!

@AnthonyJonesBrigadeBoats 2 жыл бұрын

Thanks, definitely appreciate the feedback!

@bryanporter5222 5 жыл бұрын

Very clear install great vid keep up the good work

@AnthonyJonesBrigadeBoats 5 жыл бұрын

Thanks!

@emmanuelmenoji7853 2 жыл бұрын

Tony, you really are a talker. But hey, your talk makes a lot of detailed sense! 👍 Thank you!

@alexsprings87 5 жыл бұрын

Awesome video as always!! Im going to be starting a tiny boat soon. (Not for fishing, but for diving in rivers.) A lot of your ideas will crossover to what I am doing. I am taking it a step above tho. i am mounting a 97 seadoo 717 in the boat. South Carolina rivers have a lot of rocks that kill outboard props.

@JohnKlopp 5 жыл бұрын

That's pretty slick Anthony! 👍

@richardcobb2852 Жыл бұрын

Thanks, very informative video.

@garysample1980 5 жыл бұрын

I'd put a piece of 1x2 under your cross brace where the strut bracket is. Then you can put in a 3rd screw and it will also help support so the 2 screws don't spit your wood

@dennisdimatteo5107 Жыл бұрын

Great video!

@darylfeld8687 3 жыл бұрын

Great video!!! God speed cuz

@AnthonyJonesBrigadeBoats 3 жыл бұрын

Thanks cuz. U tha man

@ruggedrick Жыл бұрын

Most helpful youtube video I've seen in installing gas Struts because of the plastic packaging dimensions! Lol

@AnthonyJonesBrigadeBoats Жыл бұрын

Haha, glad it helped!

@WhiskyRnR 3 жыл бұрын

Can you comment on the carbon fiber look splash guard? Is that merely tape or is it a hard piece and where did you source that? Looks amazing.

@katiedolfman6496 Жыл бұрын

That recessed seat base is really good looking! Any chance you could share how you did that?

@mattaneshansley5349 3 жыл бұрын

I love all your woodwork. Your are a master of fit and finish. It seems like if you swapped the placement of the strut, close at the bottom and high on the hatch, it might be less likely to be in the way when pulling a fish out of the well. I think the strut would flip over and still be out of the way when you closed the hatch because of those ball joints. Just a thought.

@AnthonyJonesBrigadeBoats 3 жыл бұрын

Thanks for the suggestion! You very well may be right! I just installed based on strut manufacturers instructions. I may look into that though, thank you!

@c.shoefish 5 жыл бұрын

If you wanted to...install an extension piece for the bottom screw. I know that would bug the hell out of me.... Boat looks great man.

@AnthonyJonesBrigadeBoats 5 жыл бұрын

Yeah, I thought about that but I'm pretty much to the point where I'm not sweating the small stuff anymore. I just want to finish it. I thought about just cutting off the overhang with a dremel to make it clean. Not sure if I'll do anything though as it functions fine and is very tight and secure with the two screws.

@alanharris5750 5 жыл бұрын

Nice work. Do you have any content on how you framed the aft deck on your boat? I've seen the front deck framing video. Getting ready to frame my build, but I'm struggling with the aft framing layout.

@AnthonyJonesBrigadeBoats 5 жыл бұрын

I do not, sorry. If you message me on Instagram I can send you pics of the rear build. May help you out.

@Fishboy68 4 ай бұрын

Thanks Anthony great video ! I installed some, one lid opens good but closes real fast.Do you think going up in poundage would help slow that down?

@kevinrush5101 Жыл бұрын

👍

@AnthonyJonesBrigadeBoats Жыл бұрын

🙌

@willisbrow 3 жыл бұрын

how did u flush mount that pedestal base? looking for ideas TY

@tomedwards643 2 жыл бұрын

Anthony, I check out the stuff you do a lot. You seem to take great pains in your measuring of things, while Michael Lopez admits he doesn’t ever measure much. You do a great job, so thanks for the content you provide. Am just completing an old Jon boat, but not as a bass boat. Am more of a multi-species guy but my attempt at a jon restoration isn’t up to your standard. Next time I’m going to give it a better shot. Thanks again for what content you put out.

@verygoodboy2688 5 жыл бұрын

I don’t even have a boat but I’m still gonna watch all these videos

@trentvangilst4558 5 жыл бұрын

We need a wiring vid plz!!!! good video btw

@cthreeadkins6296 5 жыл бұрын

As always great video. Thanks again brother! You are much appreciated! Can't wait for you to do an overall reveal of the entire boat.

@AnthonyJonesBrigadeBoats 5 жыл бұрын

Just saw this, thanks so much man! Can't wait to show you guys the full boat done!

@marklopez8378 3 жыл бұрын

Nice videos,Curious, would I need compartment locks to use them, I currently have the original pull handles Thanks for any info

@AnthonyJonesBrigadeBoats 3 жыл бұрын

No not necessarily, once downtrend pressure is released. Id recommend some sort of latch though opposed to pulls just in case they pop openbut that's just me!

@marklopez8378 3 жыл бұрын

Thanks man

@nammie12345 3 жыл бұрын

How did you come up with the 2.5 inches as to where you mount the strut?

@AnthonyJonesBrigadeBoats 3 жыл бұрын

manufacturer specs

@braydencash9764 5 жыл бұрын

Do a tour of the whole boat and putting some pictures of like what it started out looking like before you did everything to it like it did it have seats or no

@AnthonyJonesBrigadeBoats 5 жыл бұрын

I will be doing a reveal video that will be professionally edited (not by me at least). It will only include the finished product. For progress pics or what it was, all on my Instagram @adubjones

@braydencash9764 5 жыл бұрын

U should show a little bit when u got it or when it was bare bone

@edvc520 4 жыл бұрын

any tutorial on how to mount that seat mount? i'm surprise 1/4" board can hold that much weigh

@WhiskyRnR 3 жыл бұрын

11/32" is closer to 3/8", not 1/4"

@spiritwings4592 2 жыл бұрын

They go up to 300lbs. I installed them in high dollar boats I used to build for 17yrs

@jeffwhiteside1124 9 ай бұрын

Where did you get your hatch latches??

@frostydjdreck 5 жыл бұрын

Did the strut ever start rusting or having issues closing while being exposed to water from the live well. Would have been my only concern over time

@AnthonyJonesBrigadeBoats 5 жыл бұрын

Not yet as I haven't used it. I could see that happening though. Good thing is for 5 bucks I can simply replace it. No big deal

@gilb5710 4 жыл бұрын

Anthony Jones For $7 you can get nitride coated.

@spiritwings4592 2 жыл бұрын

They use them in boats all the time.Ive installed 100's

@uscstaylor 4 жыл бұрын

For the STUFF...lol

@andylimb 5 жыл бұрын

I’d be curious to see how the struts handle wind. Wind from the stern trying to close the hatch or from the bow trying to hyperextend them. Down here on the Texas coast or out in West Texas the wind is always blowing.

@chipsammich2078 5 жыл бұрын

It'd take a hell of a wind to affect them. If the wind did affect them they were undersized psi.

@Zamboni-0805 Жыл бұрын

I belive they are installed incorrectly. I think the need to be more vertical so they will close much smoother and not come crashing down on someones fingers. You should beable to close the hatch halfway or even more with having to hold on to the lid.

@AnthonyJonesBrigadeBoats Жыл бұрын

Install more vertically and they bind. Geometrically you can flip it but it doesn't support as well on lower pressured struts. The close rate us determined by the pound pressure of strut. The trick is to dial in the right size length and pressure accordingly for the lid. I find success with 10 inch struts in 8 pd, 10 pd, and 22 pd depending on lid size.

@Zamboni-0805 Жыл бұрын

@@AnthonyJonesBrigadeBoats Watch this short video kzfaq.info/get/bejne/sNWifKupq828dJ8.html

@AnthonyJonesBrigadeBoats Жыл бұрын

3 things. 1) that's a really heavy deck box. Not a light weight hatch lid in a boat. Your not gonna smash fingers on a hatch lid. 2) biggest issue, he has the struts mounted under the track or at a lower pivot point on the second lid. In a boat, especially a livewell, you cannot go that low, needs to hit framing. 3) im simply reshowing the manufacturers instructions, included withthe struts. But do what you prefer my friend

@dougmead7669 7 ай бұрын

Great video HOWEVER!!!!!!!!!!!!!!!!!!!!!!!! you need to be a little more specific on the clips. DO NOT under any circumstances "pop the clips off". Use a small flat tip to spread the clips if required when installing or removing from brackets!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@AnthonyJonesBrigadeBoats 7 ай бұрын

Thanks Doug. You should make a video.