Thanks! Really means a lot!!

I personally use D10/ELD and use the white wire from the x series gauge which should be your 5v output. Then run the brown wire from you x series gauge into your D21 or D22 The D connector is the far right connector looking directly at the connectors there are some diagram of civic obd1 pin out Then go into HTS Settings and click on wideband select X series gauge and change input to D10/ELD I mite try and make a video but I’m working so much!

Thanks!!! I’m also using Snake emu! For the price i recommend it! It also has BT and really come in handy when you want to data log with out plug it in via usb and you can also use tuner view the one available for android has the protocol for hts and you can actually use a tablet for like digital dash something I have been thinking about doing!

Hopefully you are using a wideband. If it’s stock NA with stock injectors start with a new d15b map and go into parameters and increase the injector offset till you get the proper air fuel. But far as tuning fuel columns can be tricky best to wire your wideband 0-5v signal wire into the ecu so you can datalog and know what columns need more fuel

No problem!

You good I don’t mind!! And honestly I haven’t tried this on any NA setups! I would definitely try RPMs around 5000 rpm or try 5500 rpm’s as your mite be set to low for this setup

And I know how aggravating it is using a chip burner when I first started years ago that’s all I had an no wideband so yeah I understand

Thank you so much man. I was wondering would it shoot mad flames if I turn on the anti lag even tho I don't have turbo?

No problem!

It should work on a N/A setup might have to add more fuel by going into the ignition cut mod and adding more fuel on the enrichment on ign Cut But not sure haven’t tuned any NA cars with HTS

I personally recommend a wideband and aim for the correct air fuel! But yes you should be able to add 15 percent to get it on the rich side of things

I honestly have no idea not familiar with the software. I skimmed the futures and it does have launch control! Wish I could be more helpful

@@Boosted_D no worries I appreciate it. I’m learning tuning and the det3 seemed like the best option for my needs, there’s just not a lot about it for my specific application.

No problem! Don’t rush it learn the ends and out of the software and soak up all the information you possibly can on tuning! I been doing this since 2008 and I still have so much to learn myself!