Apollo Z20 Z20 MAX | UPGRADES PT 2 | CARB UPGRADE

Apollo Z20 Z20 MAX | UPGRADES PT 2 | CARB UPGRADE | TOP SPEED UPGRADE

Рет қаралды 22,959

3 жыл бұрын

New round of upgrades for the Apollo z20! Parts list below!
NIBBI Racing Parts Motorcycle 125CC Air Intake Manifold 33mm Carburetor Manifold Carburetor Adapter Manifold Adapter Intake Manifold Boot for YAMAHA M www.amazon.com/dp/B075848ND5/...
Wingsmoto Sprocket Front 428-17T... www.amazon.com/dp/B010UQK6NY?...
www.ebay.com/itm/41mm-42mm-43...
www.ebay.com/itm/VM24-28mm-Ca...
www.faster-minis.com/products...

Пікірлер: 109

@its_jackson1341 3 жыл бұрын

Love the videos so much keep it up brother saving up for a z20 right now!!🤟🏼

@kendrickmoore6891 3 жыл бұрын

I needed these videos bro💯

@jordanmcguire8368 3 жыл бұрын

I’ve been researching these bikes for a month. I had a slim idea on what I wanted to try and upgrade for performance. I ordered mine last week and BY FAR you have the best videos I’ve seen. For us new to messing with fine tuning carbs know it’s one of the most frustrating things. Thank you for how detailed you get into explaining the process. Keep it up 💪🏼

@TynkaTyme 3 жыл бұрын

Appreciate that!! Thanks for watching🤙🏽🤙🏽

@YHTUTOACCOUNT Жыл бұрын

I want to do some upgrades to my Z40 this video is very helpful!

@jimbrand682 2 жыл бұрын

Thanks for the video I have learned so much from you. Appreciate the time you took to make this and do step by step helped me a lot!!

@charlesbuckmaster9550 2 жыл бұрын

Orwoyr

@charlesbuckmaster9550 2 жыл бұрын

Rye

@robertkaukani8915 2 жыл бұрын

So stoked mahalo for your help I just started riding that same bike aloha

@justinlong3621 3 жыл бұрын

These are awesome videos. I’m about to get an Apollo 18 I ordered a carb and some jets!

@TynkaTyme 3 жыл бұрын

Thanks homie! Let er rip!!

@bruzza2532 Жыл бұрын

That's why if I get one I'm getting one fully assembled cuz they go over everything to make sure it's running good and you won't lose anything during shipping

@Nicsiq 3 жыл бұрын

Yo brother. Thank you thank you for the vid. I've got my z20-max on the way!

@808pyrokka3 3 жыл бұрын

Same lol

@creekyfloorboardz1763 3 жыл бұрын

Just got mine. I couldn't get the Z20Max so i got the z20, i just got bigger wheels and its litterly the same bike as the max. 19/16 inch set

@ismaelguevara3846 3 жыл бұрын

Creeky floor boardz where did u buy the wheels?? Website?

@mikesmotoshop 3 жыл бұрын

Add a washer under needle to raise more if u have a bog yet

@nicker5486 3 жыл бұрын

I am really thinking about one but I wish the carbs just worked from the factory. They would get a lot more sales

@creekyfloorboardz1763 3 жыл бұрын

Found the keys lol. I feel stupid. I love the bike. For a Chinese bike it surprisingly runs good with a different carb nd got a decent top speed . Bigger tires for me helped alot but i know you got other bikes and just want something to mess around on.

@Chill_Outdoors 3 жыл бұрын

Hey man, nice video. My wife's Z20 MAX seems to run pretty lean too, I'm working on finding the right jetting now at 1200' elevation. I'm definitely doing that 17T sprocket upgrade

@TynkaTyme 3 жыл бұрын

Thanks man! Good luck, and happy riding!

@matrixxx01 3 жыл бұрын

I'm at the same elevation. What setup ended up working for you?

@G322G 2 жыл бұрын

@@matrixxx01 I'm at about the same elevation and i've tinkered with the vm22 carb TONS to get it dialed in just right. I've tested many main jets , idle jets and every position for the needle. After all the testing i've found using main jet 95, idle jet 38 with the needle on the center groove and the air/fuel about 1 7/8-2 1/8 turns out is perfect. I also highly recommend getting a extended quick adjust air fuel screw for tweaking.

@kercadotv3650 3 жыл бұрын

Nice video bro got one question are those the only jets did you put on or theres another we have to buy

@bruzza2532 Жыл бұрын

Yes doing very well now

@rockydotson31 2 жыл бұрын

Glad to see you still at it! You helped a lot when I bought my RFZ I think 2 years ago. I just got a 2022 Boom Vader(Grom clone) and I've been moddn the shit outta it. what editing software do you use? i have some videos i need to chop up and make look good. appreciate it man

@TynkaTyme 2 жыл бұрын

I use LumaFusion for editing. Thanks for watching the past couple years!! Hope to see some uploads from you soon!

@project5r680 2 жыл бұрын

Capcut

@scooterp7060 3 жыл бұрын

God bless you 🙏

@TeamNoAffiliation 2 жыл бұрын

You're around Savannah?!?!? Me too!!

@bruzza2532 Жыл бұрын

Oh cool you did put a 17 sprocket

@project5r680 2 жыл бұрын

How did you get the air box out and where did you put the breather tube that went to it

@jbf813 2 жыл бұрын

Can the aftermarket sprocket be used with the factory chain on the 2021 Z20?

@bruzza2532 Жыл бұрын

Don't forget they have phoam covers for you guys that have the other kind this kind let's more air in

@andrewquintin8 3 жыл бұрын

Did you end up taking the cap that you placed on the carb off? And what did you do with the hose attached to the air box

@bugsgaming1148 2 жыл бұрын

I know this may be a silly question but what kind of replacement chain should I order for this bike..I'm not sure whr the old chain went so I'm struggling lol tia

@jordyhall1909 2 жыл бұрын

Question. I was thinking about putting a bigger back tire on my 20maxx. How would I go about that, would you recommend doin so? If so what size do you think/suggest?

@RVIV_M-gs3lo 2 жыл бұрын

You should get a dbz40 140cc so I can see if I want it cause I can’t find any vids on it

@justinhaskett3417 2 жыл бұрын

Hey there. Do you know the rear bud info ? Looking to go to a 428-46T sprocket. But I can’t find any dimensions. Thanks in advance.

@project5r680 2 жыл бұрын

There’s a Allen but on the right side of the bike where I can’t get the air box off

@illbombs Жыл бұрын

Sprocket did not fit my Z20. Did I miss something? The one they sent measures 17mm. The current one is 15mm.

@DanielTojcic 2 жыл бұрын

Do you like the z20 more than your old bike now?

@bruzza2532 Жыл бұрын

The z 20s have colored frames now three different colors I think Orange red and blue I think they even have a green painted frame too I might be thinking of a different bike

@jasonharris6607 3 жыл бұрын

Just put the 17tooth on my 125 and there is a bolt above the sprocket...mine was way loose?

@jbf813 2 жыл бұрын

That's right next to your house so lucky, the neighbors don't complain?

@blakefarrell956 3 жыл бұрын

Hows the bottom end power with the bigger sprocket?

@kerm9807 3 жыл бұрын

Have you tried a 26mm Nibbi on a 140cc pitbike?

@justinhocanson4328 3 жыл бұрын

Does your RFZ have a emissions label on muffler?

@itzchappyyo7592 2 жыл бұрын

It could be the radius of the frame but the rear shock looks bent at around 4:10

@artimusprimeoutdoors Жыл бұрын

Probably could have gone with a VM22. the 26mm is plenty for a 125 to 150.

@georgestephenpotter905 3 жыл бұрын

Good vid man. I’m close to Savannah myself. Where do you usually go to ride?

@TynkaTyme 3 жыл бұрын

Usually just behind the house for pit bikes, we have a little track, nothing special, but fun to drink beer and have a good time with. Bigger bikes usually daisy or hazlehurst, but they both shut down recently.

@georgestephenpotter905 3 жыл бұрын

@@TynkaTyme right on, my son is just learning and I got him a YCF 88 so looking for a place to take him. Thanks man.

@vinceverissimo5751 3 жыл бұрын

Solid video with your setup can you run vp110 fuel or that lean the bike to much

@artimusprimeoutdoors Жыл бұрын

Why would you run race gas on a mild compression motor?

@bruzza2532 Жыл бұрын

Did you put a 17 tooth front sprocket on it

@bruzza2532 Жыл бұрын

One guy said he put one of those $85 nibbies in he tried every jet there was could not get it going right so he bring it to the shop and they said they could not get it any better it's on here somewhere

@Guap303 2 жыл бұрын

How do you adjust the needle for fuel

@Tw0001 3 жыл бұрын

Hey thanks for the video. I just bought the same bike it and I was wondering if yours has ever had an issue with the kick starter where it moves down but doesn't engage with the engine? I had this happen 2 or 3 times in a row, where it went all the way down with little to no resistance but then work normal again after that.

@TynkaTyme 3 жыл бұрын

Go to my channel and look at clutch adjustment video.. clutch needs adjusted where the cable goes into engine. Find the video and go to the very end of the video i show you how to adjust it at the engine side

@Tw0001 3 жыл бұрын

@@TynkaTymeWill do. Much appreciated! thanks

@matthewmorrone883 2 жыл бұрын

Dude. I bought a 125 that had a 150 upgrade and a bunch of other goodies inc a mukuni carb, no ideas wbat the mm size is... it did not run proper. None of my adjustments got rid of the bog. What tjey are known fornon stock carburetors. I got another cheap knock off carb for 50CAN$ and i onky had to adjust idle and set the clip on the bottom position and it ran sweet. W.o.t everywhere.

@matthewmorrone883 2 жыл бұрын

Its a 26mm with a 95 or a 56 main jet and a 15 or 75 pilot

@stevie9361 3 жыл бұрын

If it's stock motor why did you go eith 26mm?

@acejordan1230 3 жыл бұрын

How do You feel about the bike

@randycarrillo96 3 жыл бұрын

Do you think this made a difference?

@malikaudi 3 жыл бұрын

Heyy, I got the same Apollo, and I put a mikuni on, but when I’m in third gear or fourth it bogs out when I give gas. Got any ideas of what I can do?

@lel9460 3 жыл бұрын

Wrong jetting get a smaller main jet

@PamiiG 3 жыл бұрын

@tynka, I just took off my air box on mine and put on a new air filter but I ran into bogging when giving it a lot of gas. What do I need to do to fix the bog?

@BigeSnek 11 сағат бұрын

That means it’s running lean. Since you have a less restrictive filter you have to adjust the carb or rejet it for more fuel

@purp8616 3 жыл бұрын

Hey, I have a question I have the z20 max and it's leaking gas is there a way I can fix it?

@lorenzo32 3 жыл бұрын

Where is it leaking from?

@ARIF-vz7ou 2 жыл бұрын

125cc or 140cc?

@matrixxx01 3 жыл бұрын

Hey man, you ever find main jets that work for this carb?

@TynkaTyme 3 жыл бұрын

I ordered every single main jet 90-210, and every pilot jet from 10-45 none of them worked. Took it off and put a vm22 on no rejetting required with that carb

@whatmikedoes7358 3 жыл бұрын

@@TynkaTyme just ordered a Z 20, could you help me out with the carb, which Vm22 did you put on? i'm guessing its the 26mm , but there is a few out there, just wanted to be sure. i appreciate it.

@Nicsiq 3 жыл бұрын

Yo! I have a few questions on the Z20 max. You have an email we can bounce info back and forth on?

@TynkaTyme 3 жыл бұрын

Tynkatyme@gmail.com

@bryceslid3475 3 жыл бұрын

Do you think you’ll ever put an fmf pipe on it?

@TynkaTyme 3 жыл бұрын

No. Kind of pointless in my opinion.

@bryceslid3475 3 жыл бұрын

Pointless as in it sounds just as good as the fmf or you just don’t want a loud bike?

@lel9460 3 жыл бұрын

@@bryceslid3475 those bikes are already fucking loud and an fmf exhaust would be wasted money

@kobechristian8448 Жыл бұрын

Should I get this same carb for me x18

@TynkaTyme Жыл бұрын

Yes

@stephendeentremont8410 3 жыл бұрын

Are you happy with the z20max or would you rather have your x18?

@TynkaTyme 3 жыл бұрын

I’m happy with it, just a little different than the x18.. the z20’s incorporated a lot of good things with them that are better than the 18

@EvanZubrod 3 жыл бұрын

What carb did you use for this?

@808pyrokka3 3 жыл бұрын

Looks like an authentic mikuni 👌

@TynkaTyme 3 жыл бұрын

Links in description

@acejordan1230 3 жыл бұрын

Where did u get your pro tapers from

@TynkaTyme 3 жыл бұрын

eBay

@acejordan1230 3 жыл бұрын

Thanks

@acejordan1230 3 жыл бұрын

Did u get the spacers from there to or did u already have them

@TynkaTyme 3 жыл бұрын

@@acejordan1230 they actually came with a set of risers that didn’t fit. I just typed in pit bike risers on amazon and looked for the cheapest set that included them spacers