“Had a husky one but then there was this Milwaukee one and uhh well gotta get it”lmao 😂 I have the exact same philosophy, my wife hates me haha 🤣. I just don’t understand why she doesn’t appreciate the 100 different tool pouches I’ve accumulated. It’s not like I leave them laying around the house everywhere.... 🙄🤥

Buy a 30 dollar engraver and get rid of the orange tape. There’s no question when it comes to who’s tool it is with engraved initials. Thumbs up!

"Heavy-dutier" 2:04 (Just giving you hell. Cool video man)

Use steel wool to clean rust and light coat of 3 in 1 oil.

'yano its milwaukee so u gotta get it' literally every electrician lol bag looks sick think im gonna get it

I'm gonna watch this again for the 5th time because reasons

To clean tools and to keep them clean i use a rag, some scotch-brite and ballistol oil, all you need.

Those "whompers" you got, we call Those rabbit ears in South Texas. Everytime I watch a video like this it's crazy hearing the different names for things..also the knipex demo knife you got there is pronounced kah-knee-pex but most people say ni-pex..German brand they make some pretty bad ass pliers that I'd recommend. Knipex cobras..worth it

I like a brass wire bruch and scotch brite pads, and steel wool at times. Brass brushed are more rust protective. I also used the black Rust Converter spray paint on occasion, and it lasts a long time on my steel trailer. I used to do sprinkler work and fought rust on pliers and wrenches. The black paint helped identify my tools and kept them rust free , easily identifiable, and less theft. I also like my stainless steel wire strippers. Fluid film is kind of waxy, messy, smelly, and collects dust.

Some advice from a man that’s been doing this for years. Ditch most of that stuff to a bag you leave in the truck. Majority of the time you won’t need all of that when you’re on the job site, and it’s just gonna hurt your back in the end. Also major tip BUY AN ENGRAVER. People will rip that tape right off, and walk right off the site with all your shit if you aren’t careful.

I'm working with non-rusting tools mostly. :) I'm using WD-40 and similar stuff to clean and oil the joints. Wet rag for cleaning the handles. :)

I use a steel wire brush then a light coat of 3 in 1 oil. You can use one on a drill if you have several to do just wear gloves because of kick back.

Evapo Rust works excellent safe for plastics, rubber and wood. A little expensive but look into it. Just soak overnight and comes out brand new unless there is pittting

Soak in white vinegar overnight, wash with soap and water, and dry throughly. I’d use some 3-in-1 oil afterwards. Thanks for the video man.

Thank you for sharing

3 in 1 oil is amazing to clean and protect your tools

Wire brush WD-40 and some light sanding also clean them weekly

You can use vinegar and put some salt over the rust. leave them in there for a day or two.

My dad said to let them sit in diesel! To clean the rust out, and also for maintenance. Try it and let me know. I am fixing to try it soon enough. I have been needing to clean mine. :)

Knipex, pricey but they the some of the best quality tools for strippers, wire cutters. Their linesman pliers is amazing, wiha and wera German brands are also great. Best oils and grease in my opinion are from the bike (bicycle) world get a small fine needle dropper try applying thin film oil on tool heads be careful of using on insulated tools check manufacturers recommendations hot water and liquid wash on handles plastic and rubber you can also use 99 percent isopropyl alcohol but again read manufacturers recommendations. slightly thicker grease on joints a great product you could use is muc-off bike chain lube for these leverage joints. The high quality lube is expensive but smell very nice and is thinner than heavier grease and is very good in keeping two surfaces from mating and locking up. The tool will also feel smooth to use. Take care of the tools and they will take care of you. Too many times I see many sparkys with really beat up tools if something snaps on the job replacing that is fine but replacing tools due to neglect is throwing money away. Often you keep a tool long enough and if it’s well cared for it will perform even better than when you first broke it in.

Would have Ben nice if you would have posted a link to this model!

Wire brush and some Wd-40 or you can also use a scotch-brite pad

NICE!

Make a backup crate that you could leave in your vehicle so you dont need to carry around three-four of the same tool

"Linezman" and when you said needle nose got me lmao. As an electrician from Texas I got a kick out of watching this. Have a good one!

Fluid film will keep the rust away. Good stuff. Lubes it like wd40 aswell

Gunzilla eats rust and conditions the metal. It's pricey, but you don't need a lot to begin with. Just rub it on and you're basically done. Surface rust isn't a problem, you'll just have to clean larger rust patches with a wire brush or something.

lmao, just transferred into this bag from a wheeled bag, trying to reduce how much garbage I can fit in the bag. While watching this I now know that I'm missing my level and know where I left it. Glad to see well used tools and think we have same problem, multiple redundant tools. Why do we need 4 pairs of tongue & groove pliers? Thought I'd try to reduce weigh by switching to a stripper/cutter/crimper combo. Strippers behind joint is a pain and don't trust the little cutter/crimpers to do the job with one hand. I wipe my tools down once in a while and just rag them down with WD40 which is usually when a pair of pliers start to locking up.

That's a great tool bag. But there's no pockets in other side. So I returned it. When full of tools it will cause bag to lopside.

The way I keep my tools clean is I'll put a coat of oil on them, really thin. And I put those sillica packs you get in random boxes in with my tools, have yet so see rust on them. Of course if they get mud or water on them I keep a cloth to wipe em off as well

Most the apprentices I've had wouldn't be able to lift that bag let alone carry it ,lol.

I use some worn emery cloth and WD40 to remove big rust

Where I can buy same as your clamp for gloves? Thx

little handbag?? wow here i thought was a milwaukeee packet tote 15 our 20 in lol cool

Wire wheel is what I use then some oil

How do u like the pack out tote I just bought it looking for to it

Sweet bag...I'm new to the trade and my buddy had me dumping sand and wd40 on my linemen players. Still not sure he wasn't messing with me

Put your tools in vinegar to get rust of, rinse it off with water after a day, and immediately dry and I personally use super lube and cover all exposed metal, makes them look brand new again

What model is it?

@Chilt7 i this 40cm or 50 cm bag?

Go straight to olive oil just put some olive oil on them and just sit there and work it in like keep opening and closing the tool it will work

Do you clean your tool bag?

Nice set of tools . Fine bras brush and wd40 would solve the problem . Just need to bi patient ...

Why all the foreign milwaukee stuff??

Evapo rust, or wd 40 and scotch brite pad…. Or both!

Its strange watching these videos sparky in uk all use insulated tools

Wire wheel just don’t to close to the handle with it

Sponsored by Milwaukee?

Put the metal parts in ketchup and let them sit there for a few hours and then just wipe them off. Maybe spray them with some lube spray afterwards

Open totes = all tools " borrowed" hopefully to be returned

For cleaning tools I use WD-40 with a metal brush(toothbrush size head). Spray it generously let it seat for 3-5 mins then scrub with brush wipe and repeat. It helps with rust and lubrications I am happy with the result. Every 4-5 months I do this.

0:53 flathead is the name of the screw head NOT the driver head....... SLOTTED is the name you are looking for.

Ninpex?

Electrician from Ireland here weird to see how different our tools look to you Americans

2:49 " I had a Husky bag before this and I kinda found it fit the tools better". I couldn't agree more! Love the Packout, but disappointed in the tool bags. I would like to have seen a row of compartments for small tools on the large tool side, and more on the outside. I think all of us trades (I’m a plumber) use a large variety of small tools (pliers, screwdrivers, etc). I have a 20" Husky bag that has 34 slots/compartments with a spacious interior as well, which beats the pants off any Milwaukee Packout tote. Unless Milwaukee ups their game, I will chop the Packout connectors off of something else, and hot glue gun them to the bottom of my Husky bag. I bought my first Milwaukee power tools in the '80s, and am a huge fan, but these Packout tool bag layouts get 2 huge thumbs down from me. Sorry Milwaukee :(

Are you in the IBEW Apprenticeship program?

I didn't know the sasquatch from Tenacious D was an electrician!!!!

WD-40, a wire brush, and a rag should clean your tools up a bit and keep them working smooth

T ell me about the bag

team orange tape!!!

why The orange tape in some Of Your Tools , curiosity ?

With all that ideal stuff I bet you work for Faith lol

Commercial or resi?

Bro that bag must weight 50 pounds.

crazy how americans dont use more 1000v insulated tools.

Coca-Cola works very well on rusty tools.

if You are a Electrician , how Come , You didn't Show your Multimeter , voltmeter ?????

Cleanest tool bag ever. Do you actually work? You have no clue !

I'm an electrition, too. Here in Europe we have very different tools for doing our work. Man, you have too much tools and most of them look very crappy. Throw the hole stuff away and buy some Knipex and Wera tools

I use my hands to clean up my tools, try using your own hands!