Aqara M2 Hub for HomeKit

Рет қаралды 108,028

Күн бұрын

The Aqara M2 Hub is a multi-protocol gateway for your smart home. With support for Zigbee 3.o, an IR transmitter, Bluetooth, and wifi, this thing can do a lot. And it works as a Security System in HomeKit.
Aqara M2 Hub: geni.us/Aqara_M2
Use code: M2HUBKOL1 for 15% OFF the M2 hub on Amazon US through Jun 15.
Aqara M1S Hub: geni.us/Aqara_M1S
Aqara G2H Camera Hub: geni.us/US_AqaraG2H
Aqara Wall Switch: geni.us/DoubleNeutra
Aqara Smart Plug: geni.us/AqaraPlug1
Aqara Water Sensor: geni.us/AqaraWater
Aqara Motion Sensor: geni.us/AqaraMotion1
Aqara Door Sensor: geni.us/AqaraDoor
Aqara Vibration Sensor: geni.us/AqaraPlug1
Aqara Temperature Sensor: geni.us/AqaraTemp
Linksys MX10 Wifi 6 Router: geni.us/VelopMX10
NOTE: This description contains affiliate links that allow you to find the items mentioned in this video at no cost to you. As an Amazon Associate I earn from qualifying purchases.
::::::::::::::::::::::::::::::::::::::
🔔 Subscribe for new HomeKit videos every Sunday:
kzfaq.info?...
❤️ If you find my content helpful, become a channel member to get access to our members only Discord group, early access to new videos and more:
geni.us/shanemember
::::::::::::::::::::::::::::::::::::::
✅ LET'S CONNECT
► Instagram - / shanecreates
► Twitter - / shanecreates
► Website: shanewhatley.com
::::::::::::::::::::::::::::::::::::::
Chapters:
0:00 Intro
1:40 Various Aqara Hubs
2:21 About the Aqara M2 Hub
4:30 Setup The M2 Hub
5:43 Overview
6:15 Pairing Aqara Sensors
7:07 Automations
7:40 Pairing IR Devices
8:57 Security System
11:48 Final Thoughts
::::::::::::::::::::::::::::::::::::::
🎥 RECOMMENDED VIDEOS
10 FUN Ways to Automate Your Home (w/ Aqara Sensors)
• 10 FUN Ways to Automat...
DIY HomeKit Security System with HomeBridge (in 3 Easy Steps)
• DIY HomeKit Security S...
Aqara G2H Camera Hub Review
• Aqara G2H HomeKit Came...
Aqara Smart Wall Switches
• NEW Aqara Smart Wall S...
::::::::::::::::::::::::::::::::::::::
#HomeKit #SmartHome #AqaraM2

Пікірлер: 343

@jerrycampbell7427 Жыл бұрын

*I like the old style Echo Dot because it's small also **Newest.Technology**, gives out decent sound and doesn't take up a lot of shelf space if you want to put it on beam in the workshop or shed.*

@jhk88rph 3 жыл бұрын

Just got my M2 hub and temperature sensor - easy setup! Thanks for the video, Shane!

@ShaneCreates 2 жыл бұрын

Great! Thanks for watching!

@LelandRhymes 3 жыл бұрын

Connect it to a power bank then the power bank to the wall, thus a battery backup!

@ShaneCreates 3 жыл бұрын

Great idea!

@AshamDeangelo 3 жыл бұрын

Another cool idea is buy long and flat micro USB cable.

@pawjeppesen-ifttttricks605 3 жыл бұрын

I recon your idea, but if the power is of, you won't get notifications, because your internet is offered as well.

@A_I_GHOST 2 жыл бұрын

@@pawjeppesen-ifttttricks605 another power bank to the router?

@joselo1001 2 жыл бұрын

@@A_I_GHOST zigbee will do the job 😉

@camiloparrasalazar9157 3 жыл бұрын

I’ve been using the Aqara M2 Hub for 2 months now and I have to say that the Ethernet port makes a great difference in reliability. Every accessory is much more responsive than through wifi.

@ShaneCreates 3 жыл бұрын

Nice! Thanks for sharing! Glad to hear.

@CrazyGadgetGuy Жыл бұрын

I been watching Shane videos all week while working and driving learning about all the different homekit stuff since I am switching from Alexa

@Provojuggler 3 жыл бұрын

So my wife and I are moving into our first house next week, and it seems like this is exactly what we need. Thanks for the review!

@ShaneCreates 3 жыл бұрын

Awesome, thanks for watching. And congrats on the new house!!

@HeyTechi 3 жыл бұрын

Really thorough review Shane - I must check out one of these when I get my new place sorted, I think I would really benefit from this in my set up!

@ShaneCreates 3 жыл бұрын

Thanks for watching!

@AlanMoreti 3 жыл бұрын

Also had the same issue while trying to pair via Ethernet. It worked fine when I connected my iPhone on my 2.4 Ghz network...

@mratzelster 3 жыл бұрын

I took the plunge and just ordered a bundle with the hub and temperature sensors. I have dogs too....and the video you made about how to use fans was great. I live in an older house and the HVAC definiely doesn't keep up or distribute the cold evenly. I also am getting a Mini---so I'll be using the other videos you have to learn how to set that up.

@ShaneCreates 3 жыл бұрын

Awesome! Thanks for watching!

@AdamsTechLife 2 жыл бұрын

Awesome video Shane! The M2 looks cool, especially with the Siri Shortcuts feature. I personally prefer the M1S b/c of that night light or the G2h since it knocks out 2 birds with one stone (camera + hub). Thanks for explaining the new M2 features well!

@ShaneCreates 2 жыл бұрын

Thanks Adam! I also love the night light on the M1 hubs. I use mine as "status" lights often. I think the biggest selling point for the M2 is the ethernet port and the IR blaster, for those who are interested in either. Regardless, it's great to have options so pretty much anyone can find what something to fit their needs.

@tharais Жыл бұрын

@@ShaneCreates Agreed. You got me seriously interested, when I finally realized that our LED candles used an IR remote. And, rather than using their manual, countdown timer function as we do now, I might be able to have them use HK automations. But, that lack of IR exposure to HK is a deal killer for me. At least I found that out here, from you Shane, before I ordered an M2 and ended up disappointed. ;-(

@DanZimmerli 3 жыл бұрын

Thanks Shane for all your insight and reviews. Because of your recommendations I bought the M2 and a couple sensors and switches and I’m already agreeing that Aqara stuff works well with my Apple Home. Thanks!

@ShaneCreates 3 жыл бұрын

Glad you are happy with your purchase. I've found Aqara stuff to be fast, reliable, AND affordable! Thanks for watching!

@kolee7186 3 ай бұрын

@@ShaneCreatesso there was a new update for the m2 hub today and I updated, started snooping through the settings and realized you can now bind HomeKit with M2 matter, so I decided to bind and all it does is duplicate my Aqara smart devices in the HomeKit app. With that said do I bind or not? Thought maybe binding would make the connections better?

@rcoletti1 3 жыл бұрын

Lots of talk about the hub-less future this week. But I do like Aqara’s approach - if you’re going to need a hub make it multi-purpose and give it its own place in the smart home (camera, security, IR, etc…).

@ShaneCreates 3 жыл бұрын

Agreed!

@BlazerRox 3 жыл бұрын

Please do a review of the "Bond Bridge" - I recently used it + Hoobs/Homebridge to add all of my ceiling fans to Homekit (it can learn and playback your ceiling fan RF remote signals to entire house - it also has a powerful IR blaster).

@Halsalloum 2 жыл бұрын

Thank you for your excellent review… I have a question, can I connect mi home hub to the same network of the Aqara hub? Also, can I connect Aqara sensors to the mi home? And vise versa?

@motothedog1710 Жыл бұрын

Thanks for making the video! Good job! What range does zigbee have? I want to add a water sensor for the hot water heater in my garage. I'm worried the sensor will be too far away from the hub. Thanks!

@Andrea_Lucchetti 2 жыл бұрын

Great channel , full of amazing tips and tricks to build an user friendly smart home ! keep going !

@ShaneCreates 2 жыл бұрын

Thank you so much! 🙏🏼

@rickb.3105 Жыл бұрын

I have the new m2 hub. Can I still use the original hub as a nightlight only? Your channel is great Shane, thank you

@sfchipster Жыл бұрын

Hey Shane. Love the channel and content. Suspect I’ll probably get the M2 hub but was curious what your experience has been with Aqara door/window sensor battery life. Thanks and keep up the awesome work!

@ShaneCreates Жыл бұрын

Thanks for watching! They have been awesome! Battery life is incredible... years for me.

@tombe1412 3 жыл бұрын

Great video with interesting info. I will probably have to start looking into Aqara system.

@ShaneCreates 3 жыл бұрын

Thanks Tom!

@dash8brj Жыл бұрын

I'm going to install one of these setups but run the hub off a power bank with charge passthrough. For the siren I'll take your trick of using an Amazon sired, but pair it with a 20Ah 12V battery, and a 5V stepdown for a hacked up smart plug (basically turning the smart plug into a homekit controlled 12V relay). This will stop a burglar simply turning off my power which would kill the siren.

@benrub Жыл бұрын

Your videos are excellent, thank you.

@n25992 3 жыл бұрын

As a security system , Would u recommend it over the ABODE alarm ?

@uniqueflh2941 3 жыл бұрын

Great review (as usual) Shane. Keeping this device in mind, but not sure I need to upgrade from using the G2H I currently have…

@ShaneCreates 3 жыл бұрын

Thanks Brad! 🙏

@213th 3 жыл бұрын

Great review, Shane! How do you rate this security system compared to the one you did recently with the Homebridge/Hoobs plugin? Would you still recommend that compared to running it solely on M2? I guess you can still trigger the siren from a smart plug regardless?

@ShaneCreates 3 жыл бұрын

Thanks Thomas! Both are pretty similar as far as functionality. The biggest difference probably is that with the Aqara Hub, you can only trigger the security system with Aqara sensors, and with the Homebridge solution, you can use any sensors. With that said, I think the only reason to use the homebridge solution, if you have an Aqara Hub, is so you can use other brands' sensors. If using all Aqara sensors, I'd just use that. And yes, if doing that, you can always trigger an additional siren/smart plug if the Aqara security system is triggered.

@jeffwatchuwan 2 жыл бұрын

Hi Shane, love your videos. I realise that if i need to use the IR function, i have to sign in via Aqara app. But when i sign in via Homekit, the IR function is not there. Is this expected and any work around? thanks.

@BlaqViper 2 жыл бұрын

Shaaaaaane! While the added IR devices are not exposed to HomeKit, are they exposed to Alexa? In a home theater, can I say, “Alexa, tourn on theater” and have it turn on the IR based protector and sound bar? Thanks Shane.

@DanielDrejerDK 2 жыл бұрын

1k likes! Thank you for the video, found it very useful. :)

@ShaneCreates 2 жыл бұрын

Thank you!

@mohammedabukarbal5369 2 жыл бұрын

What a great review good job bud! I got quick question, since my villa has 3 floors and the hub will be on the ground floor, the devices from other floors wont reach the hub. Is there a solution to that? Should i buy more hubs. I do have aqara h1 switches with N.

@ShaneCreates 2 жыл бұрын

Thanks Mohammed! More hubs is definitely an option if you need greater reach for child devices. And the different hubs all work pretty well together… for example if you wanted a camera, you could get the camera hub. Alternatively, as you mentioned, certain controller accessories,like the switches with neutral wires and the smart plugs, are supposed to act as zigbee repeaters expanding the range of your zigbee network.

@ruimask 3 жыл бұрын

Great video! Thanks ! Stupid question: will this ever ‘pair’ with thread protocol ? I was planning of using it as my main focus. I do like the ability to connect the IR devices 😊

@ShaneCreates 3 жыл бұрын

Right now, I don't see Aqara rolling out support for thread since they use zigbee to connect all the child devices. Zigbee and Thread are very similar in many ways. They could possibly do like Phillips hue one day and support thread in their hubs only, but that doesn't provide much benefit.

@GuyStrumtza 3 жыл бұрын

great review :) thanks for the discount I bought :)

@ShaneCreates 3 жыл бұрын

Thanks Guy!

@sdophoto1405 2 жыл бұрын

My main concern is the difference in the actual alarm as I really am wanting to ensure that I hear the leak sensors. How different is the alarm sound?

@julienvallette8071 3 жыл бұрын

Thank you Shane for this other great review and video !

@ShaneCreates 3 жыл бұрын

Thanks for watching Julien!

@julienvallette8071 3 жыл бұрын

@@ShaneCreates My pleasure !

@myHomeKithome 3 жыл бұрын

Great video as always Shane! I'm pretty bummed about the lack of IR device support in HomeKIt and the super quiet speaker, but the 128 device capacity and the fact that all four security system modes are exposed are pretty sweet!

@ShaneCreates 3 жыл бұрын

Thanks Dustin! I figured it would be difficult to expose IR devices to homekit natively, but at least we can use Siri Shortcuts which can often get us close to what we need.

@myHomeKithome 3 жыл бұрын

@@ShaneCreates definitely! I completely glossed over that aspect of the Hub M2. I’ll have to revisit it.

@Polkster13 3 жыл бұрын

My thoughts exactly.

@myHomeKithome 3 жыл бұрын

@@Polkster13 Great minds think alike!

@alfredozamorano3489 2 жыл бұрын

@@ShaneCreates Hi Can you make a video teaching how make the Siri shortcuts to use de IR blaster? Thanks. Greetings from Chile Hola ¿Podrías hacer un vídeo enseñándonos cómo hacer los atajos para Siri para el emisor infrarojo? Saludos desde Chile

@duomono 2 жыл бұрын

Hi Shane, really enjoy your videos as we are huge Homekit users too! Hope you can help us with this one … looking to use the the IR function for our amplifier, do you know whether it accepts a double click function on the remote? Bought the Cygnett IR hub awhile back and it didn’t support the double click function, hope Aqara does! Cheers.

@ShaneCreates 2 жыл бұрын

Hi Adrian & Craig, thanks for watching! I'm sorry, unfortunately I'm not sure if it supports a double click function. I have not tried that with any devices.

@gnsirk 2 жыл бұрын

hi Shane, silly question but will i still need a homepod mini (eg) to use as a hub or does the Aqara m2 act as one? your videos have been so helpful for someone new to homekit like me. thanks!

@ShaneCreates 2 жыл бұрын

Thanks for watching. I'm glad the videos have been helpful! Yes, you will still need a HomeKit hub (i.e. Homepod mini) in order to connect your Aqara products to HomeKit.

@gk6735 2 жыл бұрын

Great review. Will this hub be able to connect to any zigbee 3.0 sensors other than made by aqara like smug sensors for instance?

@ShaneCreates 2 жыл бұрын

Thanks! No, just Aqara accessories can be paired to the hub.

@tiggerlove12 3 жыл бұрын

Thanks for the video on this new hub. I just got 4 of the cameras and a bunch of sensors. Question do I have to use my phone to set up Aquara products as I am using a 4yr old Apple iPad just for my HomeKit hub…Thanks in advance.

@ShaneCreates 3 жыл бұрын

Thanks for watching. I'd recommend using your phone. You can probably use the iPad to setup products, but I haven't tried.

@tiggerlove12 3 жыл бұрын

@@ShaneCreates Thank u

@AhmadNazirAfiq 3 жыл бұрын

Does the remote button created with M2 can be added in Aqara Home app automation? I can do that using Mi Universal Remote with Mi Home app.

@melvintan5117 3 жыл бұрын

Wonderful sharing Shane! Whenever there is a newer version hub you got hold, will you normally replaced the older version hub with it or u will just add this as an additional hub?

@ShaneCreates 3 жыл бұрын

Thanks Melvin! At the moment I'll just use it as an additional hub. Eventually I may move over all my Aqara child devices to the new one.

@left0verture 3 жыл бұрын

@@ShaneCreates Thanks for keeping us all up to date on this stuff, Shane. I’m guessing there’s no automated way to migrate Aqara devices previously paired to the new hub… meaning: I can expect to spend a day walking around the house pushing buttons and re-pairing everything and cleaning up the resulting mess in HomeKit…? Edit: NM - I found the answer further down in the comments. 😏

@jmdeg3 3 жыл бұрын

Flesh this out. I have my old hub and the new M2 on the Aqara app and the Home app. I don’t quite understand how they interact. HomeKit shows I have two security systems now… and if I “arm” the M2, it doesn’t automatically arm the original hub. So my status in the home app is that the security system (my original hub) is not armed. Even though the M2 IS armed. Does this make sense? Recommendations anyone? Should I remove my old hub completely and move to just the M2? I was hoping to use both and let the old hub cover my basement hard to reach sensors and let the M2 run my upper floors. Thoughts?

@skim7221 2 жыл бұрын

Hi Shane. Always enjoying your videos! I have a question. Does the hub connect devices through walls? Have you ever done a distance test for these hubs? Many thanks.

@ShaneCreates 2 жыл бұрын

Thanks for watching! Yes it can connect to child devices through walls. It uses zigbee connection which has pretty good range. Of course the number of walls and material will play a part in the connection. I haven't done a real distance test with these, but I haven't had any issues connecting devices on one end of my house to another, on different floors. Additional Aqara hubs, or repeater accessories (light switch with neutral, smart plug, etc) can be used to extend the range if needed.

@skim7221 2 жыл бұрын

@@ShaneCreates thank you shane!

@henk-janvanderwerf434 3 жыл бұрын

Hi Shane, great video. Does the m2 hub connect to the cloud or does it act locally without an internet connection?

@ShaneCreates 3 жыл бұрын

If you are using it only with HomeKit and/or the Aqara app, it can run locally without internet connection. Of course, with Alexa or Google, it will need to reach the cloud.

@rajaafifi4280 3 жыл бұрын

Would you mind checking out Aqara P3? My country doesn’t have much access to homekit devices so aqara is the only decent option

@puuppup 3 жыл бұрын

Wow Thai subtitles. Thanks

@Waterbottle365 3 жыл бұрын

Great video as always! I am moving soon and may go the Aqara route for my sensors to keep the cost down. Quick question for you- I am running a Unifi network, and I am considering using their cameras for the house. They will not support HKSV, however. The question is, are there any major benefits to person/animal detection when using HKSV, or will I not really be missing out on much by using a different solution? I tried to research this, but from what I can tell, there are no ways to run a specific automation or scene when a specific person or thing is detected.

@ShaneCreates 3 жыл бұрын

Thanks for watching! I guess the main benefits of person/animal detection are your smart notifications. You can get notifications based on these things and determine which clips to record as well. You cannot run automations around person detection though at the moment. And soon we'll have package detection also!

@Waterbottle365 3 жыл бұрын

Awesome! Thanks for taking the time to reply. You’ve actually replied to a few of my comments and I greatly appreciate it. I’m probably going to need some help once I move, so I’ll probably join the membership (whatever it’s called) so I can hop on your Discord. Keep doing what you do!

@jimenezfamily7988 3 жыл бұрын

Can you share how to make shortcuts to control the ir remote feature on the new hub?

@BlaqViper 3 жыл бұрын

You did a great video previously about Thread , now part of the Matter standard. Are there any upcoming Matter based hubs about to hit the market?

@ShaneCreates 3 жыл бұрын

Certain products will be able to act as thread border routers, such as the HomePod mini, the new Apple TV 4K, and the Nanoleaf Shapes. Then any thread/matter accessories should be able to pair with the thread border router. Here's the video on the Nanoleaf Shapes: kzfaq.info/get/bejne/eMifn5SJmKzLf4U.html

@paul9387 2 жыл бұрын

Shane, if you already had Smartthings hub, would you purchase Aqara sensors and used them with it or you'd rather go Aqara sensors with Aqara hub. Does it make sense to purchase this additional hub?

@ShaneCreates 2 жыл бұрын

I have not used them with a Smartthings hub so I'm not sure if the sensors maintain all the same functionality as the Aqara Hub or not.

@voteband 13 күн бұрын

I am wondering if the child devices from different regions (Mainland & Global) can still be detected by HomeKit?

@iZilly 2 жыл бұрын

So can one connect LifX bulbs to the Aqare M2 instead of your normal router? Our internet supplier has issues with dropped connection now and then and when offline we are not able to control our lights... Would this be a fix worth going for?

@ShaneCreates 2 жыл бұрын

No, you cannot connect LifX bulbs to the Aqara Hub. LifX bulbs are wifi based so they must connect to directly to your wifi network.

@danielmattsson8138 Жыл бұрын

I am about to create a home alarm system with these products and I have a question. I case some one breaks in, by nature your eye would search for the alarm sound the the unit will sound! A reflex would be to rip it down and throw it into a wall or something .. would this silence the alarm and disconnect it?? Also if the wifi goes down in the house would the alarm still be functioning?? Happy for answers

@ShaneCreates Жыл бұрын

Yes I think it does require power so unplugging it would stop the alarm (I assume... haven't tried that). These products all connect via zigbee, so even if your wifi goes down, the security system should still work.

@tuomomakitalo5128 Жыл бұрын

Hi, great video. What would you suggest for a newbie in 2023 when Matter starts to roll out. I have homepod mini and Yale Linus with Yale bridge, and that’s it. Is Aqara M2 the best IR remote for siri shortcuts, or is there any solution for Matter ir remote? Also what about RF remotes? Are there anything on the market? I have a lot of RF controlled outlets, and would love to get those to work with homekit. Do you have any tips? Thanks in advance!

@ShaneCreates Жыл бұрын

Hey thanks for watching. M2 is certainly a good option for IR and Siri Shortcuts. Not really sure about RF. I don't think there are any IR or RF remotes that work natively with homekit. Many have been able to get devices like these working in homekit via homebridge (not officially homekit certified). Might be worth lookin into, but might also be more than you want to deal with if you are just getting started.

@simonemiotto2673 3 жыл бұрын

Hi, great video as usual! Stupid question: does the M1S hub expose all four alarm modes in HomeKit? I have the M1 and i want to expand the system to add more coverage and sensors, i have to choose between the M2 and the M1S. I have no need of IR and i want more volume for the alarm but i’m using only the away mode with the homekit geofencing. Having all the alarms exposed woul be very interesting

@ShaneCreates 3 жыл бұрын

Hi Simone, that's not a stupid question. Yes, the M1S hub DOES expose all 4 alarm modes to homekit, unlike the previous generation M1 hub. If you want more volume, that is probably a good option for you.

@simonemiotto2673 3 жыл бұрын

@@ShaneCreates thank you!

@MarkLee1 Жыл бұрын

m1s has never made any alert triggers sounds for me. The sounds work when I set them up through the app (and when arming/disarming), but when the guards actually trigger, it only flashes lights and all the sounds come through iphone/mac/watches.

@Adrian89azsx89 2 жыл бұрын

Hello, please can you tell me how many meters will work the aqara m2 hub to comand the AC ? I have a broadlink rm4 pro and will work at the distance of 2meters to comand the AC. Thanks

@ojasray1 2 жыл бұрын

Would you recommend going with an all aqara eco system - instead of lutron? Or is Wifi still a good option?

@ShaneCreates 2 жыл бұрын

I'm assuming you are just referring to light switches? Aqara uses zigbee, not wifi, to connect to light switches and all other child devices. I like the Aqara products. They have worked well for me. I also love Lutron for light switches, but yea, Aqara is a good budget option. I like the fact that they DON'T use wifi and instead use zigbee.

@coptastacul 2 жыл бұрын

Hey Shane, kind of a rookie question for you: how do I get notifications from a door sensor or from a movement sensor when I’m away? I can’t seem to figure it out. They do work, but only when my phone is connected to the same 2.4 Ghz network as the M2 Hub. When I switch to the 5G one, or to the Cellular 4G connection, the hub appears disconnected from the Home app. Then I bought a Homepod mini and tried using the M2 as a bridge, but the results are the same. What am I missing here, please help!

@Polkster13 3 жыл бұрын

I currently have a M1 hub and four G2H camera hubs. I have ordered the M2 hub last week and it is supposed to be here tomorrow (Monday). I am planning on moving only the child devices to be used for the alarm system from the M1 hub to the M2 hub. That will be the 4 exterior door contact sensors and the 7 leak sensors. The temperature sensors and other contact sensors for the closet doors will remain on the M1 hub. Question: If I were to use the new M2 hub as my primary alarm system controller, will I be able to use the motion sensors in the G2H camera hubs to trip the alarm system?

@ShaneCreates 3 жыл бұрын

Yes, you can use the motion sensors from the G2H in your alarm modes.

@djgreg971 2 жыл бұрын

Hi, does the hub only work with aqara products or does it work with other zigbee products ?

@ShaneCreates 2 жыл бұрын

Yes, just Aqara products.

@experiencekohchang Жыл бұрын

I don’t quite get it. If I have the M2 connected permanently in line of site with my Aircon, will I be able to control my air remotely?

@gregghayes6710 2 жыл бұрын

the built in IR blaster is super easy to configure and finally I have and IR blaster that directly works with Siri Shortcuts! I’m throwing my Logitech Harmony Huv away! I have Been asking logitech for Siri shortcut or HomeKit support for years, but they don’t listen.

@lampingromeo Жыл бұрын

Can this hub actually replace my Harmony Hub? I’m so sick of the inconsistent performance of the Harmony.

@randallpatrickc 2 жыл бұрын

This (and their cheap accessories) seems a good fit for a “ring security replacement” Homekit alarm system - what would you add as a smart lock (looks like the one you had tested isn’t available now?) Apple don’t seem to have any Homekit approved locks?

@ShaneCreates 2 жыл бұрын

Sure, there are a number of homekit locks available. I've only used a couple of them. Haven't used them personally, but I've also heard good things about Schlage and Level lock.

@randallpatrickc 2 жыл бұрын

I inherited an August G2 smart lock - trying to get that to work. Homekit reports it closing and opening but says “setup required’ - wonder if it needs the wifi module? Written to August support so we’ll see.

2 жыл бұрын

Great video!!

@ShaneCreates 2 жыл бұрын

Thanks Andrew!

@TrevPerry Жыл бұрын

I just added mine today. Can you use the IR devices in HomeKit? Just added a fan that I would love in HomeKit.

@ShaneCreates Жыл бұрын

No, unfortunately there is not way to get the IR devices into homekit. Only support for Siri Shortcuts.

@paul8926 3 жыл бұрын

I’ve never heard of this gadget. Love the idea of putting this device in your mailbox to know when you got Mail 📬

@syub2407 Жыл бұрын

Hey could you link the Amazon siren products please? Thanks a bunch I would appreciate it a lot

@bbcdanang 4 ай бұрын

do i need homepod or tv stay on to make my homekit accessible?

@DYAnzures Жыл бұрын

Good video. Thank you. Just placed an order for an Aqara Hub M2 , and one of each sensors for door, motion and water. Would you know if Xiaomi child devices work with Aqara Hub M2?

@ShaneCreates Жыл бұрын

I've heard they can... or at least at one point in time they could, but I have not tried.

@utooboobnoob 2 жыл бұрын

Any issues with the M2 becoming unresponsive or bricking?

@randallpatrickc 2 жыл бұрын

I watched your vids and my Aqara hub and sensors arrived today. I am getting a little bit confused though as to what sets off the smart plug with the siren connected. I did watch the other video and I do like the idea of using the 12 V DC supply into a cheap siren (arrives tomorrow - great idea!) as I don’t have Apple Music subscription. But, what triggers the alarm? The M2 Hub security or the Aqara sensors that appear in Homekit?

@ShaneCreates 2 жыл бұрын

If using all Aqara sensors, you could probably do it either way. But it might be easiest to just create an automation with the hub (security system in homekit) that says when the security system is triggered, then turn on the smart plug (siren). Then you don’t have to worry about setting automations for each sensor. You can configure the hub in the Aqara app to be triggered by whichever sensors you want since you are using all Aqara stuff.

@randallpatrickc 2 жыл бұрын

@@ShaneCreates Sounds good - I'm all Aqara - tks for the vid - they really appear to be great value (and tiny!). So setup the alarm in Aqara and just set off the siren in Homekit when the hub security system says so.

@randallpatrickc 2 жыл бұрын

Ok., coming on nicely - I have Aqara sensors (only) triggering the M2 alarm. In Homekit, I have an automation that when the alarm is triggered, a plug (that will have the siren on as you suggested) is switched on. When I disarm a triggered alarm condition, the M2 alarm stops but the siren switch is still on. How do I turn it off (short of turning it off individually in Homekit)?

@reinaldoperez1725 Ай бұрын

agora m2 hub question: How far can the sensors be from the hub? Can I run multiple M2 hubs in different parts of the house without issues? What are the gotchas?

@SlagiKYD Жыл бұрын

Great video. My question is that have bluetooth protocol for connection of the child devices and if are working with Mi Home app?

@ShaneCreates Жыл бұрын

Thanks for watching. The child devices connect via Zigbee. They may work in the Mi Home app (they used to), but it's been a long time since I tried. I use the Aqara app and homekit.

@SlagiKYD Жыл бұрын

@@ShaneCreates Thank you.

@user-si3wm1dy9q 3 жыл бұрын

Do you have to add curent accessories to new hub or it take it automatically from old hub?

@ShaneCreates 3 жыл бұрын

Good question. Yes, you have to add existing child devices to the new hub manually.

@fransjoleihitu Жыл бұрын

Is it possible to add Ikea smartbulps and regulate with homekit?

@jimmi6867 3 жыл бұрын

Hi Shane. Do you have any idea, how to get alarm notifications on your iPhone at night - when the iPhone is in “do not disturb”-mode. For example, if you are sleeping somewhere else than home. Great videos on your Channel :-) Jimmi Denmark

@ShaneCreates 3 жыл бұрын

Thanks Jimmi! I actually haven't tested that out.. with DND. Not sure if you can force notifications like that through. If not, I'd rely on the siren, or get an additional siren, or you could turn on your bedroom lights maybe when the alarm is triggered (if you have homekit lights in the bedroom).

@tharais Жыл бұрын

Yes. On iPhone: Settings Notifications Home "ALWAYS DELIVER IMMEDIATELY" Critical Alerts (turn button on)

@Crsmaster 3 жыл бұрын

What will be your recommendation for Smart Light Switch (no neutral) of 1/2/3-gang that works with Homekit??

@ShaneCreates 3 жыл бұрын

My "go-to" is always Lutron Caseta for smart switches. No neutral needed for their dimmers. And "runner-up" is probably Aqara switches as a good budget option.

@likhan.ghosh. Жыл бұрын

Is the hub only to connect the accessories to? The reason I’m asking is I have 2 Aqara cameras, both have 3 accessories linked to them. The issue is, the minute you change WiFi, or change WiFi password, or anything like that, everything’s offline. There’s no way to go into the Aqara app and update the password. The only option is remove the devices from the Aqara app and HomeKit and add them all over again. Very painful. What I’m trying to understand is will the cameras also connect to the hub? My hope is that as the hub can be connected by Ethernet the cameras won’t reply in the WiFi details. Thanks

@jig1056 6 ай бұрын

So I just picked up the M2. I also have a SmartThings hub and I use HomeKit can an Aqara wireless button ton control a TP link, smart plug that is available in HomeKit or SmartThings? I have smart thing buttons, but the batteries in these buttons will literally die in a week. I was hoping to use the Aqara button with some of my existing smart plugs, is that possible?

@Joe-fn9mi 2 жыл бұрын

Might be a dumb question but what would be the point in this, over the apple HomePods? Disregarding the IR function of course.

@ShaneCreates 2 жыл бұрын

Hey Joe. An Aqara hub is needed in order to connect the Aqara child devices, such as the motion sensor, water sensors, wall switches, etc. The latest video discusses all of the Aqara hubs and the capabilities of each: kzfaq.info/get/bejne/j8WooayIub6Umqc.html

@Marticulate 2 жыл бұрын

Can this control / learn rf remotes like 433mhz blinds or similar so you can control it on your phone?

@dark13art 2 жыл бұрын

Is this supporting multi-users - for example, to have the same setup on two or more phones?

@ShaneCreates 2 жыл бұрын

If using HomeKit, you can "invite" other iPhone users to join your home. Then they can access your smart home accessories on their devices.

@Shahrizal2311 8 ай бұрын

If i have apple tv 4k 2022 and should i buy aqara M2 hub?

@millbean13 3 жыл бұрын

Just found this channel and been watching the crap out of these vids. I think in one you said something about having a server or server room setup or something like that. If I understood that right, I’d love a video showing how you have all the different hubs hooked up and connected to your WiFi router? Is there some type of multi-socket hub or deck you just plug into router that has a bunch of Ethernet sockets? Does connecting a ton of hubs directly to the router affect internet speed or reliability?

@ShaneCreates 3 жыл бұрын

Thanks for watching Clay! My "server room" is just a closet under my stairs where my main router and various hubs live. It's actually quite a mess right now lol. That is a big project on my To-Do list one of these days. I really need to fix it up and organize it again. I do use an unmanaged gigabit ethernet switch, just to provide more ethernet ports for things like hubs. Connecting many hubs via ethernet shouldn't really affect speed or reliability assuming you have a decent router. I will be doing a smart home tour sometime in the near future and I'll be happy to show this area (and the mess that it is). And maybe if I ever get around to re-organizing it and fixing up the "server room", that could potentially be another video on it's own.

@HardyOh 3 жыл бұрын

@@ShaneCreates A smart home tour video showing what you got connected in your home would be a great video to visually see what you're using and your use cases to give us viewers some new ideas on automation and how to achieve them. Organizing your server room should be its own video too! Happy to watch your videos!

@AlexManMe 2 жыл бұрын

Couldn’t you play a custom sound on HomePods or AirPlay two speakers if the alarm is triggered

@adrianadrianutzu 3 жыл бұрын

Hi! Roborock is compatible with aquara hub 2, can I see roborock in the apple home app?

@estusflask982 Жыл бұрын

where did you get that globe lamp

@CindyLee-zk7yv Ай бұрын

Have you tried the new M3? Would love to see your review.

@ShaneCreates Ай бұрын

It’s not available yet. Stay tuned!! 😉

@tylerking7890 Жыл бұрын

Hey, Shane! I’m currently thinking about getting the Aqara G4 and U100, which means I also need to get a hub. Does it matter whether I get the M1S vs. this M2 hub for the lock and doorbell?

@ShaneCreates Жыл бұрын

It does not matter in terms of acting as a hub. I did make a video showing the differences of all the hubs. So it just depends on what other features you prefer. M1S has a louder speaker and the cool LED ring. The M2 can be connected via Ethernet and can be used as an IR blaster.

@tylerking7890 Жыл бұрын

@@ShaneCreates Gotcha. I’ll probs go with the M2 for hardwiring ethernet and the potential to act as a hub to more devices. (And the possibility of getting a fan with a remote, which means using the IR sensor of the M2. 😎) Thank you!

@MrHlopes10 2 жыл бұрын

Hi Shane, nice video! Can you control automations with this hub and devices from other brands? for example xiaomi devices? I would like to have the IR function but most of my devices are from xiaomi, so I don't know If it makes sense to buy Aqara. What do you think? Thanks!

@Charlie-cc6vo 2 жыл бұрын

i dont think so, BUT you should watch aqara's announcement video about suppporting the Matter standard - KZfaq it. this MIGHT mean this hub could support non aqara devices that are compatible with matter, but i don't know whether this extends to other zigbee devices such as from xiaomi

@tharais Жыл бұрын

No. But, it's possible to have a non-aqara device "trigger" an aqara device in HK such that, that aqara device will trigger the hub. i.e. an aqara dummy switch (smart plug) can be turned on by an event and, when it is, that can trigger the hub security alarm.

@petershurmer5130 2 жыл бұрын

I’m new to HomeKit and not sure I’m clever enough for homebridge. Will this control my roller shutters? I was provided with ORVIBO allone and it doesn’t seem to be able too be added to my home

@ShaneCreates 2 жыл бұрын

Hey Peter. If your shutters can be controlled via IR, then you could add those controls to this hub. However, that will not expose them to HomeKit, or the Home app.

@brucebattjer994 3 жыл бұрын

I enjoy your videos! I bought an Aquaria M2 hub specifically for the IR capability so I could switch inputs on my AVR using Siri.. I fired up the hub, added my Yamaha receiver, and learned the HDMI port buttons from the air remote. Everything works, but I can't figure out how to get Siri to run the "Watch Cable TV" automation I created in Aqara. I am also confused about the options to synch with Homekit or vice versa. Can you or someone please help?

@ShaneCreates 3 жыл бұрын

You need to create a scene in the Aqara app (which maybe you've already done). Then you can "add to Siri" either by tapping the menu (3 dots) when editing the scene or by tapping the Siri icon from the main scene tab. The Name synchronization just allows you to sync all the device names between the Aqara app and HomeKit so everything has the same names in both apps.

@thomaslogonran2403 3 жыл бұрын

What happens to the Aqara Hub, when Apple releases Thread? will this be supported with Thread.

@ShaneCreates 3 жыл бұрын

I doubt Aqara will support thread.. but who knows? Maybe one day.

@cgheeraert 3 жыл бұрын

Hi shane, thx for the tips. I have a M1, ik would like to add the M2 for the ethernet connexion. Would all the devices on the M1 still work if my wifi was down?

@ShaneCreates 3 жыл бұрын

If your internet goes down, all of the devices should still be able to work locally.

@cgheeraert 3 жыл бұрын

@@ShaneCreates but if the M2 has internet connection, and the wifi goes down but M1 still has power but no wifi, will the child devices stil work on the zigbee network from the M2?

@andreyga22 Жыл бұрын

Is this the same as the MI Smart Home Hub?

@joshuahaney1135 7 ай бұрын

Thought I could use this with my fireplace remote unfortunately unfortunately it doesn’t seem that I can

@Psychogen100500 2 жыл бұрын

M2/P3/etc alarm mirroring still lacks in Home App.

@chrisnunn6748 2 жыл бұрын

Can you use this Aqara equipment with an alarm monitoring service?

@ShaneCreates 2 жыл бұрын

No, unfortunately.

@geek2330 3 жыл бұрын

Shane, those motion and door sensors....wonder if you like Aqara better than Eve?? Eve uses Thread I think

@ShaneCreates 3 жыл бұрын

I like both! Eve uses thread and Aqara uses zigbee. Both protocols are very similar in their performance. I'd recommend either for speed and reliability in the sensors.

@geek2330 3 жыл бұрын

Thanks. I think Eve then has an edge for HK users since there's no need to buy an extra hub since the HomePod Mini is a hub :-)

@TheUnofficialMaker 2 жыл бұрын

except more $$$

@s.morovic1809 2 жыл бұрын

What's the range of the sensors?

@hjparma Жыл бұрын

Shane, I have struggled to use multiple Aqara hubs including M1S in combination with M1 and G2H hubs to extend my range. I heard this is supposed to be possible but I have had no luck getting it to work. When I add a new hub, all devices remain connected to the original Aqara hub, and signal remains poor after long periods or restarting the child device. I see nobody covering this topic on KZfaq, so it could be a helpful video to make!

@ShaneCreates Жыл бұрын

Adding additional hubs will not extend the range. You can remove accessories and pair to another hub. The only way to extend the range of your current hub/zigbee network is to use devices that can act as a zigbee repeater, such as the Aqara smart plug or Aqara smart switch (with neutral wire).

@hjparma Жыл бұрын

@@ShaneCreates thanks, that’s what I’ve had to do in some cases but it’s still not ideal because one has to reconfigure all HomeKit scenes and automations. I also have a couple of Aqara smart plugs and it does not seem to help.